Repair/Renovation of false ceiling, lavatory block, roof of First Floor and hard standing etc. of Guest House No. II (FTH) at OFBa Estate.

Amount

Demolition, Cement concrete (unreinforced) or brick coba of any description and in any position not otherwise specifically provided for as directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Excavating over areas in hard/dense soil not exceeding 1.5 M deep and getting out, as directed by the Engineer-in-Charge.

M & L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified All as directed by EIC.

M & L for sand filling under floors or in foundations including watering and consolidation, complete all as specified All as directed by EIC. .

M & L for providing cement concrete 1:4:8 Type D2 using 40 mm graded aggregate as in foundation, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M & L for RCC 1:2:4 type B1 using 20mm. graded aggregate for slabs supported on walls , beams , columns in floors,landings,roofs,balconies,deck slabs and like for repair of damaged RCC portion All as directed by EIC.

M & L for brickwork with subclass "B"bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge

Rendering 15 mm. thick cement plaster , 1:4 on fair faces of brick work or concrete surfaces All as directed by EIC.

Screed bed or bedding layer of mortar 25 mm. thick in cement plaster 1:4 for laying floor finishes .

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Preparation of plastred surface old or new by applying 3mm thick wall care putty where ever reqd. (Putty make: Asian cement base putty/JK white or equivalent make cement base putty or equivalent make as specified ).All as directed by EIC.

Preparation of old painted surfaces of steel & iron any description of two coats of synthetic enamal paint , after one coat of red oxide zinc chrome all as specified directed completed Brand: Asian paint / Burger /Nerolac or equivalent make only All as directed by EIC.

M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed by the Engineer-in-Charge.

M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm or 450*350*7thick set and joint in neat cement slury and pointed in white or colour cement to (joint free)make:kajaria,johnson, somany,orient,bell or equivalent make All as directed by EIC.

Supply and Fixing joints free non skid coloured ceramic premium quality tiles 7 to 8 mm. thick area of each tile exceeding 0.18 sq.m. but not exceeding 0.38 sq.m. , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match . Make :- 600×600 mm. size premium quality tiles of H.R. Jhonson / Kazeria /Somani/Orient /Bell or equivalent make All as directed by EIC.

S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade With Grey Cement and pigment etc. complete and all as directed by Engineer - in - Charge.

S&F Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified etc. complete and all as directed by Engineer - in - Charge.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling Size of grid 605 x 605mm cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified etc. complete and all as directed by Engineer - in - Charge.

Material and labour Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. Wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) to curved surface for any sunk or raised moulding etc. complete and all as directed by Engineer - in - Charge.

M & L for formwork rough cast finished surfaces of concrete flat for soffits of suspended slabs such as roof slab, floor slabs , landings , slab beams , chajjas or similar works horijontal or sloping for repair of damaged RCC portion All as directed by EIC.

M & L Providing steel reinforcement for concrete in deformed or twisted bar 10 mm. dia., cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wires (annealed) not less than 0.9mm dia or securing with clips etc. complete for repair of damaged RCC portion All as directed by EIC.

S & F Fabrication and Erection/Fixing MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates All as directed by EIC.

Supply and fixing PRE- PAINTED Galvanised corrugated steel sheeting 0.50 MM total thickness Coloured glossy/matt finish regular modified polyster painting top painting 18-20 micron thick and bottom painting 5 - 7 micron thick epoxy primer service coat with corrugation side lap fixed with L type or J TYPE or cranked hook bolts or self tapping screw in roofs, walls etc. of approved color & design all as per specification and as directed by EIC.

M&L - PVC ( SWR) floor trap 75 mm. dia. plain with grating including jointing with solvent cement fixed , including removal of old nahani trap , complete as directed by EIC.Make :- Prince/Finolex/Supreme or equivalent make.

S & F for PVC (SWR) pipes bore in 110mm, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engieer-in-Charge.Make: Supreme, Prince or equivalent make.

S & F for PVC (SWR) bends bore in 110mm, any redius complete all as specified and as directed by the Engieer-in-Charge. Make: Supreme, Prince or equivalent make.

S & F for PVC (SWR) bore in 110mm,branch pipce, single (single Y) equal or unequal complete all as specified and as directed by the Engieer-in-Charge.

Supply and fixing PVC. Connection pipe 15mm bore dia and length up to 600mm for washbasin, sink, flush tanks, urinals with all accessories etc. complete.

Taking down galvanised steel tubing 15 mm bore dia. and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engieer-in-Charge.

Supply and fixing of galvanised steel tubing 15 mm bore dia. medium grade with all fittings / connections and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engieer-in-Charge.

Supply and fixing of galvanised steel tubing 20 mm bore dia. medium grade with all fittings / connections and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engieer-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails, M.S. Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F solid PVC door frame of size 50mm * 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.

S & F anodised aluminium section powder coated doors/window/ventilator shutters aluminium section weighing .55 KG/M, 1.10 KG/M of lock / bottom rail i/c joining cleats, glazing clips, rubber neoprane packing, handles disc type two nos. in each door hinges, aluminium snap beading screws etc. in each door, hinges, aluminium snap beading screws etc. in each door with one or more rebate including joining cleat for fixing etc. complete all as specified and as directed by the E.I.C. Make:-JINDAL, HINDALCO or equivalent make.

S & F anodised aluminium section powder coated frame for partition, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (coating minimum 50 micron) complete all as specified and as directed by the Engineer-in-charge. Make: JINDAL, HINDALCO or equivalent make.

Providing and fixing sheet glass/glazing in aluminium windows/ventilators shutters etc. with gasket & glass panes of 4.00 MM thick n. exc 0.50 sq. m in each pane etc all as directed by EIC..

Providing and fixing figured glass, pin head type /glazing in aluminium windows/ventilators shutters etc. with gasket & glass panes of 4.00 MM thick n. exc 0.50 sq. m in each pane etc all as directed by EIC..

Providing and fixing figured glass, pin head type /glazing in aluminium windows/ventilators shutters etc. with gasket & glass panes of 6.00 MM thick & exc 0.50 sq. m in each pane etc all as directed by EIC..

Supply & Fixing machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M & L for 20 mm thick granite(Z-black or Rooby Red) work (table rubbed and polished) in steps, cill and like in cement mortar( 1: 4 ) including pointing in white cement ( 1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by the Engineer-in-charge.

M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as per specification & all as directed by EIC.

Providing cement concrete Type B0 1:2:4 (12.5mm graded aggregrate) in roof kerbs, roof padding (50mm thick), rounded otr chamfered on edges etc complete and all as directed by Engineer-in-Charge.

Supply and fixing Stainless steel wire cloths, 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixing in any position etc with stainless steel wire staples, beading etc complete All as directed by EIC.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 500 m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination

Supply and fixing of Towel rail 600 mm long. Make : Jaquar ACN-CHR-1111 SM or equivalent make & all as directed by Engieer-in-Charge.

Supply and fixing of Towel ring. Make : Jaquar (ACN-CHR-1121 N) or equivalent make & all as directed by Engieer-in-charge.

Supply and fixing Glass cornor. Make : Jaquar (ACN-CHR-1173) or equivalent make & all as directed by EIC.

Supply and fixing of Toilet roll holder. Make : Jaquar (AKP-CHR-35753 P) or equivalent make & all as directed by Engieer-in-charge.

Supply and fixing Hand Shower. Make : Jaquar (ALD-CHR-583) or equivalent make & all as directed by Engieer-in-charge.

Supply and fixing Rimlless single piece EWC with UF soft close seat cover. Make : Jaquar (ONS-WHT-10853S300) or equivalent make & all as directed by Engieer-in-charge.

Supply and fixing Orissa Pan size-445X585X260 . Make : Jaquar (ECS-WHT-451) or equivalent make & all as directed by Engieer-in-charge.

Supply and fixing sink cock table niounted with swing spout. Make : Jaquar (FLR-CHR-5357N) or equivalent make & all as directed by the Engineer-in-Charge.

Supply and fixing Half pedestal for FNS-WHT-40801. Make : Jaquar (FNS-WHT-40305) or equivalent make & all as directed by the Engineer-in-Charge.

Supply & fixing Wash basin. Make : Jaquar (FNS-WHT-40801) or equivalent make & all as directed by the Engineer-in-charge.

Supply & fixing Accessories set, wall mixer 3-IN-1 system with provision. Make : Jaquar (FUS-CHR-29281) as directed by the Engineer-in-charge.

Supply & fixing Hand shower 100mm dia round shape multi. Make : Jaquar (HSH-CHR-1939) or equivalent make & all as directed by the Engineer-in-charge.

Supply & fixing Two way bib cock kubix prime CP. Make : Jaquar (KUP-CHR-35041PM) or equivalent make & all as directed by the Engineer-in-charge.

Supply & fixing Angular stop cock with wall flange. Make : Jaquar (KUP-CHR-35053PM) or equivalent make & all as directed by the Engineer-in-charge.

Supply & fixing Overhead shower 105mm dia round'cs shape SI. Make : Jaquar (OHS-CHR 1709) or equivalent make & all as directed by the Engineer-in-charge.

Supply & fixing Shower arm casted 190mm long light body. Make : Jaquar (SHA-CHR-477) or equivalent make & all as directed by the Engineer-in-charge.

Supply & fixing Flexible tube K.11,1 dia & 1.5m long with. Make : Jaquar (SHA-CHR-549D8) or equivalent make & all as directed by the Engineer-in-charge.

Supply & fixing Premium wall brecket for hand shower. Make : Jaquar (SHA-CHR-555) or equivalent make & all as directed by the Engineer-in-charge.

Supply & fixing Soap dish (polycarbide) Make : Jaquar (AQN-CHR-7733) or equivalent make & all as directed by the engineer -in-charge.

S&F of modular switch one way 6 Amp, 1 module,make - Cona/ Legrad/ C&S/ Havells/ Anchor or equivalent

S&F of modular switch one way 16 Amp, 1 module,make - Cona/ Legrad/ C&S/ Havells/ Anchor or equivalent

S&F of modular socket, 2/3 or combine 2&3 pin , 6 Amp, make - Cona/ Legrad/ C&S/ Havells/ Anchor or equivalent ( as per directed by EIC)

S&F of modular Bell push 6 Amp, 1 module,make - Cona/ Legrad/ C&S/ Havells/ Anchor or equivalent

S&F of modular socket, multi purpose 3 pin 6/16 amp combined make - Cona/ Legrad/ C&S/ Havells/ Anchor or equivalent

S & F of Lamp holder , PVC /Polycarbonate type with back plate suitable for Angle/batten/type.Anchor/CONA makeor its equivalent

S & F of ceiling rose, 3 phase/PVC / polycarbonate, isolated body as directed by EIC.

Taking down fan,sealing cable end, dismantleing blades and removing fan and blades to store.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan.

Taking down copper/aluminium point wiring (light, fan,socket or power)complete inclduing fixture and fittings such as switches, ciling rose, pendants, regulators, scokets, light fittings etc removing materials to store and making good disturbed surfaces of walls ,floors etc.

M&L for one light point or one fan point controlled by one switch with 2.5 sq mm copper conductor 1100 V grade, FR PVC insulated cable of Polycab/Finolex/HPL/V-guard make or equivalent in PVC conduit with FR PVC insualted 2.5 sqmm copper earthwire & accessories with and as directed by EIC. ( Red /Yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

S&F point wiring for one 3 pin socket outlet,15 Amps.Independent with 4 sq mm copper conductor,1100V grade, FR PVC insulated cable of Polycab /Finolex/HPL/V-guard make or equivalent in PVC conduit with FR PVC insualted 4 sqmm copper earthwire & accessories with and as directed by EIC. ( Red/yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

M&L for wiring for circuit/submain wiring alongwith earth wire with the 2X 2.5 sqmm+1X1.5 sqmm earth wire sizes of FR PVC insulated copper conductor , single core cable of Polycab/Finolex/HPL/V-guard make or equivalent in surface/recessed in PVC conduit as required. (Red/Yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

M&L for wiring for circuit/submain wiring alongwith earth wire with the 2X 4.0 sqmm+1X2.5 sqmm earth wire sizes of FR PVC insulated copper conductor , single core cable of Polycab/Finolex/HPL/V-guard make in surface/recessed in PVC conduit as required.( Red/yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

M&L for wiring for circuit/submain wiring alongwith earth wire with the 2X 6.0 sqmm+1X 4.0 sqmm earth wire sizes of FR PVC insulated copper conductor , single core cable of Polycab/Finolex/HPL/V-guard mak in surface/recessed in PVC conduit as required .( Red/Yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

M&L for wiring for circuit/submain wiring alongwith earth wire with the 2X 10 sqmm+1X 6.0 sqmm earth wire sizes of FR PVC insulated copper conductor , single core cable of Polycab/Finolex/HPL/V-guard mak in surface/recessed in PVC conduit as required .( Red/Yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

M&L for bell AC,230V.Anchor/Cona make

Cutting chases, making good surfaces and pointing in cement mortar 1:3 for concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Supply & fixing MCB single Pole & neutral SPN 32 A ,C - series 240V, 10KA miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply & fixing MCB tripple Pole & neutral TPN 40 To 100 AMP ,C - series 240V, 10KA miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m

S&F sheet metal enclosure DB for MCBs 4 way ,three phase and neutral,415 volt with Double Door.HPL/Havells/L&T/C&S make or its equivalent.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20A MCB. HPL/Havells/L&T/C&S make or its equivalent.

S& F 4 Module modular white color plateincluding nut & screw

M& L 6 Module modular white color plate including nut & screw

M& L 8 Module modular white color plate including nut & screw

S& F 4 Module MODULAR METAL FLUSH BOX

S& F 6 Module MODULAR METAL FLUSH BOX

Supply and fixing electric water geyser 240 V AC storage type steel body with copper inner tank and heating element upto 2 KW capacity 15 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc make: crompton , bajaj & racold or equivalent

S& F 8 Module MODULAR METAL FLUSH BOX

S&F 12 module moduler white color plate with moduler metal flush box including nut & screw.

S&F 10 watt LED COB recessed downlight fitting warm white round shape for false ceiling make:Havells/Bajaj/Crompton or equivalent

S&F 15 watt LED recessed downlight for false ceiling warm white color round shape recessed fitting make:Havells/Bajaj/Crompton or equivalent

S&F warm whit ultra bright false ceiling cove led strip 10 mtr with adaptor make-philips /wipro or equivalent.

S&F spot light multicolor outdoor type with waterproof upto 5 meter light range make -havells/bajaj/philips or equivalent

Supply & fixing of 900 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, with remote control operated class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019),

Supply & fixing of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, with remote control operated class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019),

S&F point wiring for one 3 pin socket outlet,15 Amps.Independent with 6 sq mm copper conductor,1100V grade, FR PVC insulated cable of Polycab /Finolex/HPL/V-guard make or equivalent in PVC conduit with FR PVC insualted 6 sqmm copper earthwire & accessories with and as directed by EIC. ( Red/yellow/Blue colour for Phase, Black colour for neutral and Green colour for Earth wire)

DARSHAN SINGH PLAHA (BID ID -842192)