STATE PLAN 2018-19 DRILING OF BORE WELL AND SUPPLY AND ERETION OF SUBMERSIBLE PUMP SETS -VARIOUS SCHEMES UNDER WSP SECTION KSD

Amount

Cost of Materials

Supplying and erection of 180 mm 6 kg/cm2 pvc casing pipe ISI marked and all cost of materials labour charges etc complete.

supply of 180mm dia End cap

Supply of PVC Pipe, 6kg/cm2, 90mm Dia.

Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.

Supply of 80mm dia CID Joint of required class with all accessories

Supply of 90mm dia PVC BEND 10kg-90/45/30 degree

Supply of 90mm PVC tee -10kg

Supply of 75mm PVC FTA

Supply of 90x75mm PVC reducer -10kg

Supply of 75mm PVC tee -10kg

Supplying and erection of suitable Pump set

Supply of suitable having SS body, GM impeller Bore well submersible pump set with accessories - [Total head 130m, Discharge 2.00 lps, Efficiency 70 % ] including10m coloumn pipe and power connection cable 10m. And having a total warrenty of 2 years.

Supplying suitable DOL starter for the above motor

Supplying HRC Type Common main switch with HRC fuse unit

Supplying 100mm size flush mounting type volt meter suitable for the above motor

Supplying 100mm size flush mounting type ammeter suitable for the above motor

Supplying suitable power factor improvements capacitor of required capacity for the above motor

Supplying wall mounting type MS control panel board of suitable size for mounting the required electrical fixtures in the pumping station as per ISI Rules (Common)

Supply suitable type single phasing preventor with dry running guard

Supplying 100mm size pressure gauge of required range with cock valve etc,. Complete

Supplying suitable size CI/DF valve with ISI mark

Supplying suitable size CI/DF NRV valve with ISI mark

Three phase wiring from supply point to incoming circuit breaker and switch board to starter to motor etc. with armed PVC copper cable in required number of runs as per IE rules with required current carrying capacity including fixing the starter switches, Voltmeter indicating lamp , ELCB etc. complete

Providing Earthing for the complete installation as per IE including supply of materials required for earthing.

Erection of pumpsets, motors, valves and all other accessories including testing, commissioning and conducting trial running of the pumpset as for one week as per the direction of departmental officers including maintenance of the pumpset installation for the first 2 years

65 mm dia GI class B-pipe (m)

Power cable suitable for the pump set with ISI mark

Supply of rubber mat 1.20x1.20m

Supplying and fixing iron cabin pump house

Fabricating supplying and conveying to the site and erection of moveable type iron cabin upmp house of size 1.50x1.50x1.80m with 50x50x5mm angles and25x25x5mm angles,providing painted 22 gauge galvanized iron sheet around the box and also providing corrugated aluminium sheet of best quality at the top with iron frame 25x25x5mm angles covering ceiling with 6 mm ply wood and providing one window of size 45x60cm and one door of size 75x180 cm with one pad lock best quality 7 levers providing bottom 2.50cm thick hard wood wooden planks for flooring and providing one good quality folding type chair etc. complete including painting two coats with best quality enamel paint inside and outside of the cabin over a priming coat on iron works as per the direction of the deptl. officer at site.

Folding chair for iron cabin pump house

Bidder Name

Amount

M ABOOBACKER

K SULAIMAN, KALPANA ELECTRICAL AND PLUMBING WORKS

M ABOOBACKER

M ABOOBACKER