Construction of Rural Police Station (G+2) at Mahudha, Dist-Kheda (Including Electrification & Fire Fighting)

In Figure In Words

1 Excavation for foundation in Loose & soft Soil upto 1.5 mt. depth including sorting out 1580.00 Cumt. 115.92 RS: One Hundred Fifteen and

and stacking of useful materials and disposing of the excavated stuff upto any Lead and lift. Paise Ninty Two only

2 Excavation for foundation in Dence & hard Soil l 1.5 m to 3.00m. depth including sorting 1057.00 Cumt. 160.77 RS: One Hundred Sixty and

out and stacking of useful materials and disposing of the excavated stuff upto any Lead and Paise Seventy Seven only

3 Excavation for foundation in Dence & hard Soil 3.00 m to 5.00 m. depth including sorting 113.00 Cumt. 172.50 RS: One Hundred Seventy Two

out and stacking of useful materials and disposing of the excavated stuff upto any Lead and and Paise Fifty only

4 Providing & laying Cement Concrete 1:3:6 ( 1cement : 3 coarse sand : 6 broken stone 99.00 Cumt. 2976.00 RS: Two Thousand Nine Hundred

aggregate 40 mm nominal size) and curing complete in FOUNDATION AND PLINTH. Seventy Six only

5 Providing & laying Cement Concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone 116.00 Cumt. 2653.67 RS: Two Thousand Six Hundred

aggrigates of 40 mm nominal size) curing complete excluding cost of formwork in Fifty Three and Paise Sixty Seven

FOUNDATION AND PLINTH. only

6 385.00 Cumt. 4550.55 RS: Four Thousand Five Hundred

Providing and laying controlled cement concrete M - 250 including finishing smooth with Fifty and Paise Fifty Five only

curing etc complete including cost of Plywood only with fair finish & Proping must be of steel

only but excluding cost of reinforcementRate are inclusive of providing and mixing

plastisizer of approved make in proportion as per mix Design. for R.C.C. work in Footing.

7 66.00 Cumt. 8613.29 RS: Eight Thousand Six Hundred

Providing and laying controlled cement concrete M -250 including finishing smooth with Thirteen and Paise Twenty Nine

curing complete including the cost of Plywood only with fair finish & Proping must be of steel only

only but excluding cost of reinforcement Rate are inclusive of providing and mixing

plastisizer of approved make in proportion as per mix Design. for R.C.C. WORK IN

COLUMN having any cross sectional area of column upto plinth

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

8 35.00 Cumt. 7021.28 RS: Seven Thousand Twenty One

Providing and laying controlled cement concrete M - 250 and finishing smooth with curing

and Paise Twenty Eight only

etc complete including cost of Plywood only with fair finish & Proping must be of steel only

but excluding cost of reinforcement Rate are inclusive of providing and mixing plastisizer of

approved make in proportion as per mix Design. for R.C.C. work in PLINTH BEAM for any

cross sectional area of beam.

9 441.00 Cumt. 3981.21 RS: Three Thousand Nine

Brick work using common burnt clay building bricks having crushing strength not less than

Hundred Eighty One and Paise

35 Kg/Sq.cm.in in C.M. (1:6) (1-cement;6-coarse sand), Conventional bricks (upto 10 ton).

Twenty One only

Bricks with frog only shall be used Foundation and Plinth.

10 Filling available excavated earth (excluding rock ) in trenches, plinth sides of foundation etc. 2388.00 Cumt. 129.10 RS: One Hundred Twenty Nine

in layers not exceeding 20 cms. in depth consolidation each deposited layer by ramming and Paise Ten only

and watering.

11 4605.00 Cumt. 279.23 RS: Two Hundred Seventy Nine

and Paise Twenty Three only

including watering, ramming and consolidating etc. complete

12 FILLING in plinth with SAND under floors including watering, raming consolidating and 45.00 Cumt. 455.63 RS: Four Hundred Fifty Five and

dressing etc. complete. Paise Sixty Three only

13 Applying general insecticide pest control treatment to floors, cupboard etc. including 450.00 Sqmt. 88.40 RS: Eighty Eight and Paise

labour, material etc. complete.Using lmidacloprid 30.5 SCas per IS 6313 PART-ii (0.075% Forty only

concentration by mass) is recommended 10.5ml chemical emulsion dillute with 5 litre of

water application 0.5 litrechemical /Sqm of surface is recommended as per I.S.

14 8.00 Cumt. 5906.91 RS: Five Thousand Nine Hundred

Providing and laying controlled cement concrete M - 250 and finishing smooth with curing

Six and Paise Ninty One only

etc complete including cost of Plywood only with fair finish & Proping must be of steel only

but excluding cost of reinforcement for R.C.C. work in Coping. Providing and mixing

Plasticizer in Cement Concrete as per mix Design including rate of labour material etc. as

per direction of Engineer in Charge.

15 Providing & laying Cement Concrete 1:5:10 ( 1cement : 5 coarse sand : 10 )broken stone 45.00 Cumt. 2492.51 RS: Two Thousand Four Hundred

aggregate 40 mm nominal size) and curing complete in FOUNDATION AND PLINTH. Ninty Two and Paise Fifty One only

16 Providing and laying controlled cement concrete M - 150 and finishing smooth with curing 74.00 Cumt. 3942.50 RS: Three Thousand Nine

etc complete including cost of Plywood only with fair finish & Proping must be of steel Hundred Forty Two and Paise Fifty

onlybut excluding cost of reinforcement for R.C.C. work in Grad Slab. Providing and mixing only

Plasticizer in Cement Concrete as per mix Design including rate of labour material etc. as

per direction of Engineer in Charge.

17 Providing and laying controlled cement concrete M-250 and finishing smooth with curing 28.00 Cumt. 10359.26 RS: Ten Thousand Three Hundred

etc. complete excluding the cost of Plywood only with fair finish & Proping must be of steel Fifty Nine and Paise Twenty Six only

only & the cost of reinforcement Rate are inclusive of providing and mixing plastisizer of

approved make in proportion as per mix Design. for R.C.C. work in COLUMNS for any

cross sectional area at GROUND FLOOR.

18 Providing and laying controlled cement concrete M-250 and finishing smooth with curing 34.00 cmt 10398.66 RS: Ten Thousand Three Hundred

etc. complete excluding the cost ofPlywood only with fair finish & Proping must be of steel Ninty Eight and Paise Sixty Six only

only & the cost of reinforcementRate are inclusive of providing and mixing plastisizer of

approved make in proportion as per mix Design. for R.C.C. work in COLUMNS for any

cross sectional area at FIRST FLOOR.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

19 34.00 Cumt. 10438.06 RS: Ten Thousand Four Hundred

Providing and laying controlled cement concrete M-250 and finishing smooth with curing

Thirty Eight and Paise Six only

etc. complete excluding the cost ofPlywood only with fair finish & Proping must be of steel

only& the cost of reinforcement Rate are inclusive of providing and mixing plastisizer of

approved make in proportion as per mix Design.for R.C.C. work in COLUMNS for any

cross sectional area at SECOND FLOOR.

20 17.00 Cumt. 10477.46 RS: Ten Thousand Four Hundred

Providing and laying controlled cement concrete M-250 and finishing smooth with curing

Seventy Seven and Paise Forty Six

etc. complete excluding the cost ofPlywood only with fair finish & Proping must be of steel

only& the cost of reinforcement Rate are inclusive of providing and mixing plastisizer of

approved make in proportion as per mix Design.for R.C.C. work in COLUMNS for any

cross sectional area at THIRD FLOOR.

21 4.00 Cumt. 10516.86 RS: Ten Thousand Five Hundred

Providing and laying controlled cement concrete M-250 and finishing smooth with curing

Sixteen and Paise Eighty Six only

etc. complete excluding the cost ofPlywood only with fair finish & Proping must be of steel

only& the cost of reinforcement Rate are inclusive of providing and mixing plastisizer of

approved make in proportion as per mix Design.for R.C.C. work in COLUMNS for any

cross sectional area at FOURTH FLOOR.

22 48.00 Cumt. 8737.52 RS: Eight Thousand Seven

Providing and laying Controlled cement concrete M-250 and finishing smooth with curing Hundred Thirty Seven and Paise Fifty

etc.. complete including the cost of formwork Plywood only with fair finish & Proping must Two only

be of steel only but exculding the cost of reinforcement Rate are inclusive of providing and

mixing plastisizer of approved make in proportion as per mix Design. for BEAMS having

any cross sectional area for GROUND FLOOR.

23 43.00 Cumt. 8776.92 RS: Eight Thousand Seven

Providing and laying Controlled cement concrete M-250 and finishing smooth with curing Hundred Seventy Six and Paise Ninty

etc.. complete including the cost of formwork Plywood only with fair finish & Proping must Two only

be of steel only but exculding the cost of reinforcementRate are inclusive of providing and

mixing plastisizer of approved make in proportion as per mix Design. for BEAMS having

any cross sectional area for FIRST FLOOR.

24 40.00 Cumt. 8816.32 RS: Eight Thousand Eight

Providing and laying Controlled cement concrete M-250 and finishing smooth with curing Hundred Sixteen and Paise Thirty

etc.. complete including the cost of formwork Plywood only with fair finish & Proping must Two only

be of steel only but exculding the cost of reinforcementRate are inclusive of providing and

mixing plastisizer of approved make in proportion as per mix Design. for BEAMS having

any cross sectional area for SECOND FLOOR.

25 Providing and laying Controlled cement concrete M-250 and finishing smooth with curing 5.00 Cumt. 8855.72 RS: Eight Thousand Eight

etc.. complete including the cost of formwork Plywood only with fair finish & Proping must Hundred Fifty Five and Paise Seventy

be of steel only but exculding the cost of reinforcement Rate are inclusive of providing and Two only

mixing plastisizer of approved make in proportion as per mix Design. for BEAMS having

any cross sectional area for THIRD FLOOR.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

26 4.00 Cumt. 8895.12 RS: Eight Thousand Eight

Providing and laying Controlled cement concrete M-250 and finishing smooth with curing Hundred Ninty Five and Paise Twelve

etc.. complete including the cost of formwork Plywood only with fair finish & Proping must only

be of steel only but exculding the cost of reinforcement Rate are inclusive of providing and

mixing plastisizer of approved make in proportion as per mix Design. for BEAMS having

any cross sectional area for FOURTH FLOOR.

27 18.00 Cumt. 8126.51 RS: Eight Thousand One Hundred

Providing and laying Controlled cement concrete M-250 finishing smooth with curing Twenty Six and Paise Fifty One only

etc.complete including the cost of formwork Plywood only with fair finish & Proping must be

of steel only but excluding the cost of reinforcement for R.C.C. work in SLAB having

thickness of 10cm and upto 13cm for GROUND FLOORRate are inclusive of providing

and mixing plastisizer of approved make in proportion as per mix Design including rate of

labour,material etc.as per direction of Engineer in charge.

28 3.00 Cumt. 8165.91 RS: Eight Thousand One Hundred

Providing and laying Controlled cement concrete M-250 finishing smooth with curing Sixty Five and Paise Ninty One only

etc.complete including the cost of formwork Plywood only with fair finish & Proping must be

of steel only but excluding the cost of reinforcement for R.C.C. work in SLAB having

thickness of 10cm and upto 13cm for FIRST FLOOR Rate are inclusive of providing and

mixing plastisizer of approved make in proportion as per mix Design including rate of

labour,material etc.as per direction of Engineer in charge.

29 3.00 Cumt. 8205.31 RS: Eight Thousand Two Hundred

Providing and laying Controlled cement concrete M-250 finishing smooth with curing Five and Paise Thirty One only

etc.complete including the cost of formwork Plywood only with fair finish & Proping must be

of steel only but excluding the cost of reinforcement for R.C.C. work in SLAB having

thickness of 10cm and upto 13cm for SECOND FLOOR Rate are inclusive of providing

and mixing plastisizer of approved make in proportion as per mix Design including rate of

labour,material etc.as per direction of Engineer in charge.

30 87.00 Cumt. 7702.61 RS: Seven Thousand Seven

Providing and laying Controlled cement concrete M-250 finishing smooth with curing Hundred Two and Paise Sixty One

etc.complete including the cost of formworkPlywood only with fair finish & Proping must be only

of steel only. but excluding the cost of reinforcement for R.C.C. work in SLAB having

thickness of 13cm and upto 15cm for GROUND FLOOR Rate are inclusive of providing

and mixing plastisizer of approved make in proportion as per mix Design including rate of

labour,material etc.as per direction of Engineer in charge.

31 Providing and laying Controlled cement concrete M-250 finishing smooth with curing 78.00 Cumt. 7742.01 RS: Seven Thousand Seven

etc.complete including the cost of formworkPlywood only with fair finish & Proping must be Hundred Forty Two and Paise One

of steel only. but excluding the cost of reinforcement for R.C.C. work in SLAB having only

thickness of 13cm and upto 15cm for FIRST FLOOR Rate are inclusive of providing and

mixing plastisizer of approved make in proportion as per mix Design including rate of

labour,material etc.as per direction of Engineer in charge.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

32 Providing and laying Controlled cement concrete M-250 finishing smooth with curing 83.00 Cumt. 7781.41 RS: Seven Thousand Seven

etc.complete including the cost of formworkPlywood only with fair finish & Proping must be Hundred Eighty One and Paise Forty

of steel only. but excluding the cost of reinforcement for R.C.C. work in SLAB having One only

thickness of 13cm and upto 15cm for SECOND FLOOR Rate are inclusive of providing

and mixing plastisizer of approved make in proportion as per mix Design including rate of

labour,material etc.as per direction of Engineer in charge.

33 Providing and laying Controlled cement concrete M-250 finishing smooth with curing 6.00 Cumt. 7820.81 RS: Seven Thousand Eight

etc.complete including the cost of formworkPlywood only with fair finish & Proping must be Hundred Twenty and Paise Eighty

of steel only. but excluding the cost of reinforcement for R.C.C. work in SLAB having One only

thickness of 13cm and upto 15cm for THIRD FLOOR Rate are inclusive of providing and

mixing plastisizer of approved make in proportion as per mix Design including rate of

labour,material etc.as per direction of Engineer in charge.

34 Providing and laying Controlled cement concrete M-250 finishing smooth with curing 6.00 Cumt. 7860.21 RS: Seven Thousand Eight

etc.complete including the cost of formworkPlywood only with fair finish & Proping must be Hundred Sixty and Paise Twenty One

of steel only. but excluding the cost of reinforcement for R.C.C. work in SLAB having only

thickness of 13cm and upto 15cm for FOURTH FLOOR Rate are inclusive of providing

and mixing plastisizer of approved make in proportion as per mix Design including rate of

labour,material etc.as per direction of Engineer in charge.

35 Providing and laying controlled cement concrete M - 250 including finishing smooth with 3.00 Cumt. 8461.28 RS: Eight Thousand Four Hundred

curing etc complete including cost of Plywood only with fair finish & Proping must be of steel Sixty One and Paise Twenty Eight

only but excluding cost of reinforcement Rate are inclusive of providing and mixing only

plastisizer of approved make in proportion as per mix Design. for R.C.C. work in Lintel for

Ground Floor.

36 Providing and laying controlled cement concrete M - 250 including finishing smooth with 3.00 Cumt. 8500.68 RS: Eight Thousand Five Hundred

curing etc complete including cost of Plywood only with fair finish & Proping must be of steel and Paise Sixty Eight only

only but excluding cost of reinforcement Rate are inclusive of providing and mixing

plastisizer of approved make in proportion as per mix Design. for R.C.C. work in Lintel for

First Floor.

37 Providing and laying controlled cement concrete M - 250 including finishing smooth with 4.00 Cumt. 8540.08 RS: Eight Thousand Five Hundred

curing etc complete including cost of Plywood only with fair finish & Proping must be of steel Forty and Paise Eight only

only but excluding cost of reinforcement Rate are inclusive of providing and mixing

plastisizer of approved make in proportion as per mix Design. for R.C.C. work in Lintel for

Second Floor.

38 Providing and laying controlled cement concrete M - 250 including finishing smooth with 1.00 Cumt. 8579.48 RS: Eight Thousand Five Hundred

curing etc complete including cost of Plywood only with fair finish & Proping must be of steel Seventy Nine and Paise Forty Eight

only but excluding cost of reinforcement Rate are inclusive of providing and mixing only

plastisizer of approved make in proportion as per mix Design. for R.C.C. work in Lintel for

Third Floor.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

39 Providing and laying controlled cement concrete M - 250 including finishing smooth with 1.00 Cumt. 8618.88 RS: Eight Thousand Six Hundred

curing etc complete including cost of Plywood only with fair finish & Proping must be of steel Eighteen and Paise Eighty Eight

only but excluding cost of reinforcement Rate are inclusive of providing and mixing only

plastisizer of approved make in proportion as per mix Design. for R.C.C. work in Lintel for

Fourth Floor.

40 Providing and laying Controlled cement concrete M-250 for R.C.C. COPING/LINTEL 18.00 Cumt. 5906.91 RS: Five Thousand Nine Hundred

BEND including finishing smooth with curing etc. Complete including the cost of Plywood Six and Paise Ninty One only

only with fair finish & Proping must be of steel only but excluding the cost of reinforcement

for FIRST FLOOR. Rate are inclusive of providing and mixing plastisizer of approved

make in proportion as per mix Design.

41 Providing and laying Controlled cement concrete M-250 for R.C.C. COPING/LINTEL 17.00 Cumt. 5946.31 RS: Five Thousand Nine Hundred

BEND including finishing smooth with curing etc. Complete including the cost of Plywood Forty Six and Paise Thirty One only

only with fair finish & Proping must be of steel only but excluding the cost of reinforcement

for SECOND FLOOR. Rate are inclusive of providing and mixing plastisizer of approved

make in proportion as per mix Design.

42 Providing and laying Controlled cement concrete M-250 for R.C.C. COPING/LINTEL 15.00 Cumt. 5985.71 RS: Five Thousand Nine Hundred

BEND including finishing smooth with curing etc. Complete including the cost of Plywood Eighty Five and Paise Seventy One

only with fair finish & Proping must be of steel only but excluding the cost of reinforcement only

for THIRD FLOOR. Rate are inclusive of providing and mixing plastisizer of approved

make in proportion as per mix Design.

43 Providing and laying Controlled cement concrete M-250 for R.C.C. COPING/LINTEL 3.00 Cumt. 6025.11 RS: Six Thousand Twenty Five

BEND including finishing smooth with curing etc. Complete including the cost of Plywood and Paise Eleven only

only with fair finish & Proping must be of steel only but excluding the cost of reinforcement

for FOURTH FLOOR. Rate are inclusive of providing and mixing plastisizer of approved

make in proportion as per mix Design.

44 Providing and laying Controlled cement concrete M-250 including finishing smooth for 46.00 Cumt. 8123.84 RS: Eight Thousand One Hundred

R.C.C. STAIR CASE including centering formwork Plywood only with fair finish & Proping Twenty Three and Paise Eighty Four

must be of steel only and curing etc. Complete excluding cost of reinforcement Rate are only

inclusive of providing and mixing plastisizer of approved make in proportion as per mix

Design FOR ALL FLOOR

45 Provinding and Laying controlled cement concrete M-250 for reinforced conerete Chhajja 12.00 Cumt. 9362.84 RS: Nine Thousand Three

not exceeding 10cm thickness up to floor two level including finishing the exposed surface Hundred Sixty Two and Paise Eighty

with cement mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth surface ,centering and Four only

formwork Plywood only with fair finish & Proping must be of steel only and curing complete.

excluding cost of reinforcement Rate are inclusive of providing and mixing plastisizer of

approved make in proportion as per mix Design FOR ALL FLOOR

46 Providing and laying Controlled cement concrete M-250 including finishing smooth for 32.00 Cumt. 14354.50 RS: Fourteen Thousand Three

R.C.C.VERTICAL AND HORIZONTAL FINS / PADADI including centering formwork Hundred Fifty Four and Paise Fifty

Plywood only with fair finish & Proping must be of steel only and curing etc. Complete only

excluding cost of reinforcement Rate are inclusive of providing and mixing plastisizer of

approved make in proportion as per mix Design FOR ALL FLOOR

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

47 Providing TMT steel (Fe - 500D) reinforcement for R.C.C. work including cutting, 131650.00 Kgs 76.29 RS: Seventy Six and Paise

bending, binding and placing in position etc. Complete for all floor. Brand As approved by Twenty Nine only

the GSPHCL only shall be Used.

48 BRICK WORK using common burnt clay building bricks having crushing strength not less 122.29 Cumt. 4246.86 RS: Four Thousand Two Hundred

than 35 Kg./Sq. cm. In in cement mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Forty Six and Paise Eighty Six only

Bricks ) for Ground Floor. Mortar shall be prepared by mixture machine only.

49 BRICK WORK using common burnt clay building bricks having crushing strength not less 111.00 Cumt. 4286.65 RS: Four Thousand Two Hundred

than 35 Kg./Sq. cm. In in cement mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Eighty Six and Paise Sixty Five only

Bricks ) for First Floor. Mortar shall be prepared by mixture machine only.

50 BRICK WORK using common burnt clay building bricks having crushing strength not less 148.00 Cumt. 4326.44 RS: Four Thousand Three

than 35 Kg./Sq. cm. In in cement mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Hundred Twenty Six and Paise Forty

Bricks ) for SECOND Floor. Mortar shall be prepared by mixture machine only. Four only

51 BRICK WORK using common burnt clay building bricks having crushing strength not less 56.00 Cumt. 4366.23 RS: Four Thousand Three

than 35 Kg./Sq. cm. In in cement mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Hundred Sixty Six and Paise Twenty

Bricks ) for THIRD Floor. Mortar shall be prepared by mixture machine only. Three only

52 BRICK WORK using common burnt clay building bricks having crushing strength not less 30.00 Cumt. 4406.02 RS: Four Thousand Four Hundred

than 35 Kg./Sq. cm. In in cement mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Six and Paise Two only

Bricks ) for FOURTH Floor. Mortar shall be prepared by mixture machine only.

53 47.00 Sqmt. 645.22 RS: Six Hundred Forty Five and

HALF BRICK masonary in common brunt clay building bricks having crushing strength not

Paise Twenty Two only

less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) conventional

bricks for Ground Floor. Mortar shall be prepared by mixture machine only .

54 HALF BRICK masonary in common brunt clay building bricks having crushing strength not 29.00 SMT 651.16 RS: Six Hundred Fifty One and

less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) conventional Paise Sixteen only

bricks for FIRST Floor. Mortar shall be prepared by mixture machine only .

55 HALF BRICK masonary in common brunt clay building bricks having crushing strength not 1.00 Sqmt. 657.10 RS: Six Hundred Fifty Seven and

less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) conventional Paise Ten only

bricks for SECOND Floor. Mortar shall be prepared by mixture machine only .

56 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering 640.00 Sqmt. 215.31 RS: Two Hundred Fifteen and

and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Paise Thirty One only

floating coat of neat cement slurry at GROUND FLOOR.

57 505.00 Sqmt. 240.53 RS: Two Hundred Forty and

Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering

Paise Fifty Three only

and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a

floating coat of neat cement slurry at FIRST FLOOR.

58 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering 435.00 Sqmt. 265.75 RS: Two Hundred Sixty Five and

and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Paise Seventy Five only

floating coat of neat cement slurry at SECOND FLOOR.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

59 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering 38.00 Sqmt. 290.97 RS: Two Hundred Ninty and

and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Paise Ninty Seven only

floating coat of neat cement slurry at THIRD FLOOR.

60 31.00 Sqmt. 316.19 RS: Three Hundred Sixteen and

Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering

Paise Ninteen only

and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a

floating coat of neat cement slurry at FOURTH FLOOR.

61 Provinding 15 mm thick cement PLASTER in single coat on block or concrete wall for 1155.00 Sqmt. 219.41 RS: Two Hundred Ninteen and

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Paise Forty One only

finishing with floating coat of neat cement slurry at GROUND FLOOR.

62 Provinding 15 mm thick cement PLASTER in single coat on block or concrete wall for 1500.00 Sqmt. 246.52 RS: Two Hundred Forty Six and

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Paise Fifty Two only

finishing with floating coat of neat cement slurry at FIRST FLOOR.

63 Provinding 15 mm thick cement PLASTER in single coat on block or concrete wall for 1450.00 Sqmt. 273.63 RS: Two Hundred Seventy Three

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including and Paise Sixty Three only

finishing with floating coat of neat cement slurry at SECOND FLOOR.

64 Provinding 15 mm thick cement PLASTER in single coat on block or concrete wall for 390.00 Sqmt. 300.74 RS: Three Hundred and Paise

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Seventy Four only

finishing with floating coat of neat cement slurry at THIRD FLOOR.

65 Provinding 15 mm thick cement PLASTER in single coat on block or concrete wall for 70.00 Sqmt. 327.85 RS: Three Hundred Twenty

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Seven and Paise Eighty Five only

finishing with floating coat of neat cement slurry at FOURTH FLOOR.

66 P & L 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over 20 mm (average) 1040.00 Sqmt. 1498.40 RS: One Thousand Four Hundred

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface orfixing on existing Ninty Eight and Paise Forty only

flooring by adhesive including dismentaling of existing flooring and material jointed with

color cement slurry including finised with flush pointing & cleaning the surface etc.Complete

size and shade of the tiles shall be as per approved architecture drawing and as per

direction of engineer inchrage for all floor .

67 P & L 24" x 24" in Skirting riser of steps and dado Double Charge vitrified 8 to 10 mm thick 92.00 Sqmt. 1392.20 RS: One Thousand Three Hundred

tile over 10 mm thick Cement plaster of cement mortar 1:3 (1 cement: 3 coarse sand) Ninty Two and Paise Twenty only

jointed with color cement slurry including finised with flush pointing & cleaning the surface

etc .Complete size and shade of the tiles shall be as per approved architecture drawing

and as per direction of engineer inchrage for all floor .

68 Pro and Laying 25mm thick Doubel Pre polished ( Dimond polished ) polished kota stone 504.00 Sqmt. 1078.70 RS: One Thousand Ten Hundred

flooring over average 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand ) and Seventy Eight and Paise Seventy

jointeed with gray cement slarry including rubbing and polishing etc. complete All kota only

stone edge shall be hand cutting Machine Cut shall be not allowed..

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

69 Pro and Laying Doubel Pre polished ( Dimond polished ) polished kota stone slab 25mm 20.00 Sqmt. 1215.70 RS: One Thousand Two Hundred

thick in risers of steps.dedo,Skirting and pillars laid on 10mm thick cement mortar 1:3 ( 1 Fifteen and Paise Seventy only

cement : 3 coars sand ) and jointed with gray cement slarry including rubbing & polishing

etc. complete

70 Providing and laying 18mm thick Granite Slab Flooring over 20mm average thick base of 185.00 Sqmt. 2128.80 RS: Two Thousand One Hundred

cement mortar 1:6 ( 1 cement : 6 coarse sand) laid over & jointed with grey cement slurry Twenty Eight and Paise Eighty only

including rubbing & polishing etc. Complete.

71 Moulding of Kota stone / Granite Stair Tread complete as per direction of Engineer In 440.00 Rmt 129.95 RS: One Hundred Twenty Nine

Charge. and Paise Ninty Five only

72 Providing and Making 3 nos of groove total length of stair case trade of size 10mm x 10mm 440.00 Rmt 82.80 RS: Eighty Two and Paise

finishind smooth in parralel line.equality spaced as per direction of engineerr in charge in all Eighty only

type of flooring etc complete.

73 Providing and laying 18mm thick Granite Slab Skirting over 10mm average thick base of 145.00 Sqmt. 2265.83 RS: Two Thousand Two Hundred

cement mortar 1:3 ( 1 cement : 3 coarse sand) laid over & jointed with grey cement slurry Sixty Five and Paise Eighty Three

including rubbing & polishing etc. Complete. only

74 Providing and fixing both side prepolished single piece machine cut 25mm thick KOTA 108.00 Sqmt. 793.90 RS: Seven Hundred Ninty Three

STONE shelves/ partition, 20mm to 25mm embedded in to wall at support including racking and Paise Ninty only

and finishing smooth the surface including cutting the stone as and where required etc.

complete including full rounding of exposed edges (i.e.front edge) etc. complete.for all

75 providing and fixing both side mirror policed machine cut granite shelve/partition 18mm thick 5.00 Sqm 2115.40 RS: Two Thousand One Hundred

embaded in to wall at support including racking and finising smooth at surface including Fifteen and Paise Forty only

cutting for stone has and where required etc.. Complete including rounding of exposed

edged etc.. complete for all floors.

76 Providing & Laying 24" x 24" vitrified 8 to 10 mm thick tile flooring over 20 mm (average) 54.00 Sqmt. 1383.99 RS: One Thousand Three Hundred

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing Eighty Three and Paise Ninty Nine

flooring by adhesive including dismentaling of existing flooring and jointed with color cement only

slurry including finished with flush ponting & cleaning the surface etc Complete for Antiskid.

Material shall be used as per approved make list by GSPHCLsize & shade shall be as per

apporoved Drawing or as per Direction Of Engineer in Charg

77 312.00 Sqmt. 1403.33 RS: One Thousand Four Hundred

Provinding & laying Printed / Coloured GLAZED TILES 6 to 10 mm thick in skirting, risers of

steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed Three and Paise Thirty Three only

with white cement slurry for ALL FLOOR. The size,brand & make of tiles shall be as

approved by GSPHCL.

78 304.50 Sqmt. 2428.00 RS: Two Thousand Four Hundred

Providing and Fixing Granite of Telephonic Black Colour 18mm thick for jambs and sills of Twenty Eight only

doors & windows using neat cement slurry laid over 20 mm average base of cement mortar

1:1 (1 cement:1 Coarse Sand) and jointed with grey cement slurry including racking

(Tancha Work) rubbing and polishing, scaffoldings, tools and tackles, scaffolding etc.

complete. (with base of neat cement) as per direction of Engineer in charge including

rounding the exposed edges as directed etc. Complete for ALL FLOORS.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

79 24.00 Sqmt. 4511.18 RS: Four Thousand Five Hundred

Providing and fixing solid WPC PVC Flush Door shutter 24mm thick. made from Co- Eleven and Paise Eighteen only

extruded three layer rigid PVC foam sheet(single Extruded) with density not less than

600kg/cbm outer layer (0.8-1mm)thick should be rigid PVC with density of not less than

1400kg/cbm. Door should be water proof, Termite proof, fire retardant & having good screw

holding capacity(200 kgf). Providing and fixing 100% Solid Wood Plastic composite (WPC)

Door Frame 90mmx45mm made from wood plastic composite(single Extruded

Process)material with density 780kg/cbm. As per drawing as directed by the engineer in

80 46.00 Sqmt. 8976.41 RS: Eight Thousand Nine Hundred

Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with Seventy Six and Paise Forty One

1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is with only

Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face

Veneer on Both Side with Lock rail on Center. Flush Door Provide with Teak wood beading

patti (32mm X 12mm) on Peripheries of Flush Door with Door Frame of Non Teak Solid

Wood of size 120mm x 65mm with Chemically ..........

..........Treated and Seasoned Including Paint Matching with Laminates. Frame & Flush door

shutter having 5 year warranty against attack of biological agent like termite, borers, decay,

fungi and harmful insects also warranty against seasoning related issues like crack,

bending, twisting, warping. Laminates on shutter shall be press by cold press method.

Shutter shall be brought to site in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is free from nail mark & any

damages etc......

Rates are also Inclusive of all Labors & Proviging 15cm. Long 6 No of Hold Fast (25mm X

5mm) & 3 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw &

Nails per Frame and Fixing following S.S. Fixtures And Fastening. (1) Aldrops 1 No, 250mm

x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double Leg Heavy Push

Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick. Door are Fixing as per

Details Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per

approved Material Make List of G.S.P.H.C. The Required Frame is to be Obtained from

Vanil Udhyog Maked Only.

81 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter 74.00 Sqmt. 8399.74 RS: Eight Thousand Three

with 1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is Hundred Ninty Nine and Paise

with Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Seventy Four only

Veneer on Both Side with Lock rail on Center. Flush Door Provide with Teak wood beading

patti (32mm X 12mm) on Peripheries of Flush Door with Door Frame of Non Teak Solid

Wood of size 100mm x 60mm with Chemically.......

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

......... Treated and Seasoned Including Paint Matching with Laminates. Frame & Flush door

shutter having 5 year warranty against attack of biological agent like termite, borers, decay,

fungi and harmful insects also warranty against seasoning related issues like crack,

bending, twisting, warping. Laminates on shutter shall be press by cold press method.

Shutter shall be brought to site in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is free from nail mark & any

damages etc....

....Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold Fast (25mm

X 5mm) & 4 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw &

Nails per Frame and Fixing following S.S. Fixtures And Fastening. (1) Aldrops 1 No, 250mm

x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double Leg Heavy Push

Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick. Door are Fixing as per

Details Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per

approved Material Make List of G.S.P.H.C. The Required Frame is to be Obtained from

Vanil Udhyog Maked Only.

82 Providing and fixing window having extruded aluminum Colour anodized section frame main 125.00 SMT 2119.14 RS: Two Thousand One Hundred

outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track member Ninteen and Paise Fourteen only

122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x

31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @

kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete

for window.

83 Providing and fixing window having extruded alluminum Colour anodized section frame 69.00 Sqmt. 1568.27 RS: One Thousand Five Hundred

main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track Sixty Eight and Paise Twenty Seven

member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size only

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member

size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x

1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc

84 Providing and fixing standared extruded of Alluminium section of size 63mm x 38.10mm x 25.00 Sqmt. 1163.92 RS: One Thousand One Hundred

1.2mm (of Jindal Section : 2434, @ Wt 0.643 Kg / mt) with colour anodized alluminium Sixty Three and Paise Ninty Two

frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation only

85 Provinding and fixing chicken wire mesh Jali 0.18 Gauge and 0.18mt wide with necessary 235.00 Sqmt. 64.06 RS: Sixty Four and Paise Six

screws and nails to joint or crack between R.C.C. column and brick work etc. complete as only

per Engineer-in-charge.wire mesh jail Shall confrom to relevant is Specifiction

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

86 Provinding 10 mm thick cement PLASTER in single coat of interior plastering and finished 412.00 Sqmt. 225.67 RS: Two Hundred Twenty Five

even and smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing with floating coat and Paise Sixty Seven only

of neat cement slurry including providing and mixing WATER PROOFING material in C.M.

in proportion recommended by the manufactures for all floors.Including finishing with a

floating coat of neat cement slurry. For ALL floor.

87 Providing & laying acrylic base ( zycosil or equivalent ) Water proofing paint treatment in 78.00 Sqmt. 110.70 RS: One Hundred Ten and Paise

two coats to vertical and horizontal surface of depressed prortion of Bath / WC as directed Seventy only

by Engineer in charge.This treatment shall be carried out over and above water proofing

cement plaster.

88 Suppllying and Filling Cinder in Sunk Portions for All Lead and Lift etc. Complete. 13.00 Cumt. 791.68 RS: Seven Hundred Ninty One

and Paise Sixty Eight only

89 Provinding CEMENT VATA ( 10cm x 10cm )size quarter round in cement mortar 1 : 1 273.00 Rmt. 23.45 RS: Twenty Three and Paise

including neat cement finishing, watering etc. Complete. Forty Five only

90 Providing, Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated from 23837.00 Kg 74.94 RS: Seventy Four and Paise

M.S. flat,square bars, round bars,c-channel, box pipe as per detail Drawings. Rate is Ninty Four only

inclusive of welding with grinding smooth surface, two coats of Oil paint and one coat of

yellow Zinc primer coat of approved brand only. Oil paint shall be Luxol Enamel paint of

Berger Paint india limited. or asian paint apcolite premium gloss Enamel of asian paint or

Dulux premium gloss enamel of dulux paint and nerolac synthetics enamel of nerolac paint

for all floor and at any height only. (Steel Should be of ISI mark only)

91 Providing and fixing Rolling shutters of approved make made of 80 mm wide M.S. laths 37.00 Sqmt. 3468.72 RS: Three Thousand Four

inter-locked together through their entire length and jointed together at the ends by end Hundred Sixty Eight and Paise

locks mounted on specially designed pipe shaft with bracket plates, guide channels and Seventy Two only

arragements for inside and outside locking with push-pull operation including the cost of

hood cover and spring etc. complete.(A) Shutters having width below 3.5 M.

92 SS Railing Providing and fixing of stainless steel 304 grade pipe railing 1.05 mt. height or 96.00 Rmt. 3143.43 RS: Three Thousand One Hundred

as specified in detail drawing or as directed. Top round pipe (Baluster) shall be of 2" dia. Forty Three and Paise Forty Three

Vertical balustar 1.5" x 1.5" at every maximum 0.90m c/c or as specified in detail drawing or only

as directed and intermediate 3 nos. runners pipe mid rail of 1" dia. and S.S. katori shall be

minimum 50mm x 50mm. All S. S. Pipe and S. S. katori must be 16 gauge. The railing

system shall be floor mounted with anchor fastener completed as per detailed drawing & as

directed by engineer in charge. Rate are inclusive of all material, labour, taxes & polishing.

93 Providing & fixing stainless steel 304 grade Pipe railing on Top of 2"dia verticle 65.00 Rmt. 911.03 RS: Nine Hundred Eleven and

balusterrade 1"*1" Every max 0.90mt c/c as per detail drawing and as directed by Engineer Paise Three only

incharge . Rate are inclusive of all material , labours , Taxes & polishing.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

94 Providing & Fixing 6mm thick Lexan Polycarbonate multy wall roofing sheet fixed with 52.00 Sqmt. 1427.62 RS: One Thousand Four Hundred

hilty screw and rubber silicon sealer and alluminium strip of size 50 X 3mm etc complete as Twenty Seven and Paise Sixty Two

directed by Engineer in charge.FOR ALL FLOORS only

95 Providing and laying intergrated cement based proprietary water proofing treatment of 520.00 Sqmt. 929.50 RS: Nine Hundred Twenty Nine

required thickness over the roof including 10mm thick waterproofing cement plaster in and Paise Fifty only

cement mortar 1:3 and CHAINA MOSAIC fitting and finally finishing the surface with white

cement slurry and sloping out terrace slabs with following specification laid to required slope

not flattar than 1:80 ( the thickness of water proofing treatment near rainwater outlet or the

lowest point of the finished slope shall not be less than 45mm including treating the vertical

surface of the parapet wall up to 20cms height above finished level of terracing including

finishing the top with joint less water proofing plaster, curring testing etc complete Rate is

including ten years performance of guarantee bond to be given on stamp paper ( No extra

shall be paid for increase in thickness for proper slope

............... rainwater outlet or the lowest point of the finished slope shall not be less then

45mm, including treating the vertical surfaseof the parapet wall up to 20cms . height above

finished level of terracing including finishing the top with joint less water proofing plaster

curing , testing etc. complete. Rate is including ten years performance of guarantee bond to

be given on stamp paper. (No extra shall be paid for increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm. of cement

admixed with properly water proofing compound conforming to IS -2645 and 10 mm thick

water proofing cement plaster in Cement mortar 1:3 over the R.C.C.slab incl. cleaning the

surface before treatment

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size with 50% of

cement mortar 1:4 (1cement :4 coarse sand ) over 10mm thick water proofing cement

plaster in cement mortar 1:3 (1 cement ,3 coarse sand) admixed with proprietary water

proofing compound conforming to IS 2645 to required slope and treating similarly the

adjoining walls up to 200mm height incl. rouding of junction of walls.

C) After Two Days of proper curing applying a second floor of cement slurry

(D) Finishing the surface with china mosaic pieces laid on 10mm thick joint less cement

plaster of mix 1:3(1 cement :3 coarse sand )admixed with proprietary water proofing

compound conforming to IS :2645 and finally finishing the surface with trowel with neat

cement slurry

(E) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curring for final taste

All above operation to be done in order and as directed and specified by the Engineer In

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

96 Constructing of cooking platform ( sandwich type ) 68cm width and 80cm high resting on 3.00 Rmt. 3757.60 RS: Three Thousand Seven

thick sandwiched polish Granite Slab in C.M 1:3 with providing and fixing 25 mm thick rough Hundred Fifty Seven and Paise Sixty

kota stone at bottom and 20 to 25 mm thick Polish Granite stone ( single piece/ telephonic only

Black ) top and polished granite stone (single piece/ telephonic Black ) 20 to 25mm thick on

top with 15mm high machine cut polished granite round moulded facia patty including

polishing etc . complete as per drawing and specification without stainless steel sink

including necessary cutting for sink & making hole for gas pipe and fixing P.V.C bend of

97 Providing and Fixing Stainless Seel (S.S. 304 grade ) 1mm thick Matt/Satin Finishing 1.00 Nos. 3695.00 RS: Three Thousand Six Hundred

Kitchen Sink of over all Minimum size 533 mm X 457 mm X 203 mm Deep having Bowl Ninty Five only

minimum size 470 mm X 395 mm X 203 mm Required adhesive material.including of 32mm

dia C.P. brass waste coupling and 32mm dia rigid PVC waste pipe upto N.T. S.S Kitchen

Sink of Approved Brand ( Nirali, Navkar,carysil , krishna) and wall mounted swan neck pillar

tap of approved brand (cera - F2013251, Hindware-F 280026,Somany - 272210190131)

98 Finishing celling/slope surface with plastic emulsion paint on ceilling/slope surface (two 1613.00 Sqmt. 188.49 RS: One Hundred Eighty Eight

coats) to give an required shap even shade after throughly brushing the surface to remove and Paise Forty Nine only

all dirt and remains of loose poweder material etc. complete. Rate are inclusive of applying

two coats of lapy (putty) and one coat of primer on new ceilling/slope surface to give and

even shade including throughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. fine putty shall be approved brand by GSPHCL

only & Primer shall be approved brand by GSPHCL only and plastic Emulsion Paint Shall be

Approved brand by GSPHCL only paint only.

99 Finishing Wall surface with plastic emulsion paint on Wall surface (two coats) to give an 4479.00 Sqmt 176.01 RS: One Hundred Seventy Six

required shap even shade after throughly brushing the surface to remove all dirt and and Paise One only

remains of loose poweder material etc. complete. Rate are inclusive of applying two coats

of lapy (putty) and one coat of primer on new Wall surface to give and even shade

including throughly brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth. fine putty shall be approved brand by GSPHCL only & Primer

shall be approved brand by GSPHCL only and plastic Emulsion Paint Shall be Approved

brand by GSPHCL only paint only.

100 Synthetic Texture Plaster with Double Coat Smooth plaster : 1590.00 Sqmt. 520.44 RS: Five Hundred Twenty and

Providing 20mm thick cement plaster in single coat plastering upto floor two level Outside Paise Forty Four only

and finished even and smooth in (i) Cement mortar 1:3 (1-cement : 3-sand) as Base Coat

and providing 2-3 mm thick synthetic texture plaster of approved texture (Material Shall be

Used as Approved By GSPHCL Only ) including cost of all materials, labour, conveyance,

loading and unloading, taxes, royalties, scaffolding, watering etc.complete for any Height as

per Drawing and instructions of Engineer -in -CHARGE ALL FLOORS.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

101 73.00 Rmt. 202.97 RS: Two Hundred Two and

Providing & fixing concealed center point to wall ceiling & floor CPVC pipes (SDR-

Paise Ninty Seven only

13.5)PIPE having National Sanitation Foundation ( NSF ) seal for potable water of following

dia. Nominal bore tube fitting and clamps including making good the wall,ceiling and floor

etc. complete. 20mm inside dia.

102 Providing & fixing concealed center point to wall ceiling & floor CPVC pipes (SDR- 164.00 Rmt. 247.25 RS: Two Hundred Forty Seven

13.5)PIPE having National Sanitation Foundation ( NSF ) seal for potable water of following and Paise Twenty Five only

dia. Nominal bore tube fitting and clamps including making good the wall,ceiling and floor

etc. complete. 25mm inside dia.

103 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) 76.00 Rmt. 437.66 RS: Four Hundred Thirty Seven

PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. and Paise Sixty Six only

nominal bore tube fittings with Pipe fixing with Single Pipe Bracket System with U Bolt

Rubber mounted for pipe supporting Clamping system for Vertical water supply pipe. Pipe

shall be concealed or open as mention in tender description. Pipe shall be as per approved

make of GSPHCL make list [E] 40mm Dia

104 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) 90.00 Rmt. 647.30 RS: Six Hundred Forty Seven and

PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. Paise Thirty only

nominal bore tube fittings Pipe fixing with Single Pipe Bracket System with U Bolt Rubber

mounted for pipe supporting Clamping system for Vertical water supply pipe. Pipe shall be

concealed or open as mention in tender description. Pipe shall be as per approved make of

GSPHCL make list[F] 50mm Dia

105 Provinding and fixing gun metal check or non return full way WHEEL VALVE 40 mm dia. 12.00 Each 656.86 RS: Six Hundred Fifty Six and

(ZOLOTO MAKE ONLY) G.S.P.H.C APPROVED BRAND Paise Eighty Six only

106 Provinding and fixing gun metal check or non return full way WHEEL VALVE 50 mm dia.( 4.00 Each 2302.33 RS: Two Thousand Three Hundred

ZOLOTO MAKE ONLY) G.S.P.H.C APPROVED BRAND Two and Paise Thirty Three only

107 P & F to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 90mm Dia 162.00 Rmt. 302.54 RS: Three Hundred Two and

Complete with Special flings, Compressor type Fittings, , Including making good the ceiling Paise Fifty Four only

and floor on terrace rain water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical

pipe and 90mm bend at the end near by Ground level rate are Inclusive of all Necessary

Fittings required.

108 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste pipe with "O" ring of 63.00 Rmt. 245.74 RS: Two Hundred Forty Five and

ISI13592/92-2013 (Reaffirmed 2018) or its relevant & latest edition &, Pipe fixing with Single Paise Seventy Four only

Pipe Bracket System with U Bolt Rubber mounted for pipe supporting Clamping system for

Vertical Drain pipe, etc.complete and making good the wall ceiling and floor. (A) 75mm dia

109 Providing and fixing to wall, ceiling and floor U.PVC SWR soil waste pipe with ' O ' Ring 98.00 Rmt. 471.36 RS: Four Hundred Seventy One

110 mm dia. of ISI13592/92-2013 (Reaffirmed 2018) or its relevant & latest edition &Pipe and Paise Thirty Six only

fixing with Single Pipe Bracket System with U Bolt Rubber mounted for pipe supporting

Clamping system for Vertical Drain pipe, etc.complete and making good the wall ceiling and

floor. (B) 110mm dia

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

110 Provinding and fixing in position PVC COWEL VENT to pipe 75 mm dia directed. 8.00 Each 16.47 RS: Sixteen and Paise Forty

Seven only

111 Provinding and fixing in position PVC COWEL VENT to pipe 110 mm dia directed. 4.00 Each 28.16 RS: Twenty Eight and Paise

Sixteen only

112 Providing and fixing U.PVC SWR Multi Nahni trap IS:14735 for drain -100mm dia.with of 16.00 Nos. 508.29 RS: Five Hundred Eight and

following nominal diameter of self cleaning design with C.I SCREWED DOWN OR HINGED Paise Twenty Nine only

grating including cost of cutting and making good the walls rate are inclisive of all

necessary fiting materials labours etc.complete as per direction of engineer in charge

.Providing & Fixing Floor Drain jalI (Gloosy Finish) (on N.T) of 6"x6" size made of stainless

steel grade 304 floor drain 3 piece (Cover /Jali/Grating)with Anti Cockroch Bowl on

N.T.Rate are inclisive of all necessary fiting materials labours etc.complete as per direction

of engineer in charge .

113 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or "S" 12.00 Nos. 5470.90 RS: Five Thousand Four Hundred

Trap including Jointing the Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S Seventy and Paise Ninty only

heavy duty rack bolt having 16mm dia, 165mm length using Plastic sleeve Make by Using

Drill Bitt Only. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complet

as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge.

Materials used for the above items Must be list approved by G.S.P.H.C.L.

114 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all matreials, Labour 12.00 Nos. 565.51 RS: Five Hundred Sixty Five and

& Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as per the Paise Fifty One only

Instruction of Engineer In charge. Materials used for the above items Must be list approved

115 Providing & Fixing Single Hole Wash Basin on Granite Slab with C.I or M.S. brackete & M. 8.00 Nos. 3935.33 RS: Three Thousand Nine

I . fisher union, P.V.C water pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle Hundred Thirty Five and Paise Thirty

Trap with connection 32mm dia. C.P. brassa waste coupling with Connection 32mm dia Three only

waste Pipe up to N.T etc. Complete. Rate are inclusive of all matreials, Labour & Necessary

Fittings etc. Complet as per Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. Materials used for the above items Must be list approved by

116 Provinding and fixing SW gully trap with out CI grating block masonary chamber and water 11.00 Nos. 1176.94 RS: One Thousand One Hundred

tight CI cover with frame of 300*300mm size inside with standard weight (I) Square mouth Seventy Six and Paise Ninty Four

traps ©150*100mm size P or R type only

117 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive of all matreials, 16.00 Nos. 1309.39 RS: One Thousand Three Hundred

Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as Nine and Paise Thirty Nine only

per the Instruction of Engineer In charge. Materials used for the above items Must be list

approved by G.S.P.H.C.L.

118 Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 8.00 Nos. 825.48 RS: Eight Hundred Twenty Five

wall with S. S. Studs (Mouthless) as directed by GSPHCL. and Paise Forty Eight only

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

119 Providing & fixing S.S. CLOTH HANGER ( 5 HOOK ) as per per Detail drawigs and as 4.00 Nos. 249.84 RS: Two Hundred Forty Nine and

directed by Engineer in charge. Rate are inclusive of all material, labour, Taxes. Samrat Paise Eighty Four only

brand as approved.

120 Providing & Fixing Shower with Arm. Rate are inclusive of all matreials, Labour & 2.00 Nos. 931.79 RS: Nine Hundred Thirty One and

Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as per the Paise Seventy Nine only

Instruction of Engineer In charge. Materials used for the above items Must be list approved

121 PProviding & Fixing 15mm Concealed Heavy Duty Stop Cock with Exposed Part & Other 12.00 Nos. 942.54 RS: Nine Hundred Forty Two and

Accessories (Sleeve, Lever, Wall Flange) . Rate are inclusive of all matreials, Labour & Paise Fifty Four only

Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. Materials used for the above items Must be list approved

122 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & Necessary 4.00 Nos. 909.08 RS: Nine Hundred Nine and

Fittings etc. Complet as per Detailed Drawings, Specifications and as per the Instruction of Paise Eight only

Engineer In charge. Materials used for the above items Must be list approved by

123 Providing & Fixing Towel Rod. Rate are inclusive of all matreials, Labour & Necessary 4.00 Nos. 1078.70 RS: One Thousand Ten Hundred

Fittings etc. Complet as per Detailed Drawings, Specifications and as per the Instruction of Seventy Eight and Paise Seventy

Engineer In charge. Materials used for the above items Must be list approved by only

124 Providing and fixing in position ISI marked Rotational moulded Polyethylene double layer 10000.00 Ltr. 3.91 RS: Three and Paise Ninty One

Cylindrical vertical storage Tank (IS : 1270) Water Tank Size including marking inlet and only

outlet. Over flow and washout arrangement with G.I. connection including using necessary

M.H. for connection etc. complete with closed cover including applying two coats of oil

painting outside the Tank etc. complete.

125 Providing & fixing 3mm acrylic sheet Vinyl letter colour-2073 dark grey for background 39.00 SMT 7193.89 RS: Seven Thousand One

and colour -2199-white letter with required screws ,plugs etc as per required size complete Hundred Ninty Three and Paise

etc as per speacification &instrution of engineer in charge. Eighty Nine only

126 Provinding a I.S.I mark 7 levers three keys brass pad lock of NAVTAL ( Goderej) make 38.00 Nos. 243.64 RS: Two Hundred Forty Three

65mm dia on completion of project. and Paise Sixty Four only

127 Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling 7.00 Nos. 2132.80 RS: Two Thousand One Hundred

with Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of all matreials, Thirty Two and Paise Eighty only

Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as

per the Instruction of Engineer In charge. Materials used for the above items Must be list

approved by G.S.P.H.C.L.

128 Providing & Fixing Wall Mounted Sink Cock with Extended Swivel Spout & Wall Flange . 1.00 Nos. 1330.32 RS: One Thousand Three Hundred

Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complet as per Thirty and Paise Thirty Two only

Detailed Drawings, Specifications and as per the Instruction of Engineer In charge.

Materials used for the above items Must be list approved by G.S.P.H.C.L.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

129 Providing & Fixing Angle/Stop Cock with Wall Flange . Rate are inclusive of all matreials, 14.00 Nos. 665.51 RS: Six Hundred Sixty Five and

Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as Paise Fifty One only

per the Instruction of Engineer In charge. Materials used for the above items Must be list

approved by G.S.P.H.C.L.

130 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of all 4.00 Nos. 184.98 RS: One Hundred Eighty Four

matreials, Labour & Necessary Fittings etc. Complet as per Detailed Drawings, and Paise Ninty Eight only

Specifications and as per the Instruction of Engineer In charge. Materials used for the

above items Must be list approved by G.S.P.H.C.L.

131 supplying j and installation of GRC jali thickness 25mm , grade M-40 ,Flexural M8 , 116.00 sqmt 7379.10 RS: Seven Thousand Three

Backside double coated frame fabrication at site including installation at site, transportation Hundred Seventy Nine and Paise Ten

loading , unloading all with both sides weather proof emulsion paint etc complete as only

directed by EIC

132 Providing & fixing CONSCEAL/FLUSH COCK 25 MM DIA. Rate are inclusive of all 3.00 Nos. 261.16 RS: Two Hundred Sixty One and

matreials, Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Paise Sixteen only

Specifications and as per the Instruction of Engineer In charge. Materials used for the

above items Must be list approved by G.S.P.H.C.L.

133 Provinding and fixing water Closet Squatting (ORRISSA TYPE W. C PAN ) size 580mm 2.00 Nos. 1321.52 RS: One Thousand Three Hundred

first quality including necessary "P" or "S" trap, including jointing the trap with pan & soil Twenty One and Paise Fifty Two only

pipe in viterous chine white colour, Joints shall be pipe sealent.

134 Finishing wall with Acrylic weather proof exterior emulsion paint (two coats) of 2663.00 Sqmt 147.68 RS: One Hundred Forty Seven

approved make of GSPHCL and one coat of primer paint on undecorated wall surface to and Paise Sixty Eight only

give of required shade after thoroughly brushing the surface to remove all dirt, dust, mortar

drops and other foreign matter etc. to any height.

135 P S & F S4 Channel system multipal Pipe Bracket System with U Bolt Rubber mounted 66.00 Each 421.58 RS: Four Hundred Twenty One

for multipal pipes for external fixed line with wall distance 3 inch including nuts & bolt and Paise Fifty Eight only

fastners etc complete as per detailed speacification and as directed by engineer incharge.

pipe supporting Clamping system, Including.

136 P S & F S4 Channel system Single Pipe Bracket System with U Bolt Rubber mounted for 77.00 Each 182.83 RS: One Hundred Eighty Two

multipal pipes for external fixed line with wall distance 3 inch including nuts & bolt fastners and Paise Eighty Three only

etc complete as per detailed speacification and as directed by engineer incharge. pipe

supporting Clamping system, Including.

137 Providing and fixing fire exitiguishing grade FRP fiber glass reinforced sheet thickness of 16.00 smt 669.44 RS: Six Hundred Sixty Nine and

3mm av. On roof with Gel coat of required colour and design and sheet to be waterproof Paise Forty Four only

weatherproof, termiteproof and mildacid / alkali resistance including fixing.

138 Extra for aditional height of proping and centering where theheight of propping and 30.00 smt 563.85 RS: Five Hundred Sixty Three

centering exceeds 4.0m between supporting floors to ceilling including temporary brick or and Paise Eighty Five only

stone pillars for supporting as requried (iii) Height more then 6.0 m to 8.00 m

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

139 Pro. & Fixing colour Anodised Alluminium fixed louveres made of 1"*4" ALLUMINIUM 30.00 smt 1762.71 RS: One Thousand Seven

SECTION of 2mm thick (jindal/Banco make)fixed at 0.14mt c/c with alluminium cleats to Hundred Sixty Two and Paise

m.s. angular frame of 355mm*35mm duly anodised and fixed with rcc/brick wall with Seventy One only

fastners as per arch. drawings.all the screws and other visible fixtures are also to be

anodised as per specification.

140 Provinding supplying and fixing stainless steel 304 Grade letters as per detail drawing and 1200.00 sqinch 118.20 RS: One Hundred Eighteen and

instruction of Engineer Incharge Paise Twenty only

141 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) 200.00 Rmt. 1312.94 RS: One Thousand Three Hundred

PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. Twelve and Paise Ninty Four only

nominal bore tube fittings Pipe fixing with Single Pipe Bracket System with U Bolt Rubber

mounted for pipe supporting Clamping system for Vertical water supply pipe. Pipe shall be

concealed or open as mention in tender description. Pipe shall be as per approved make of

GSPHCL make list[F] 65mm Dia

142 Provinding and fixing gun metal check or non return full way WHEEL VALVE 65 mm dia.( 4.00 Nos. 4865.50 RS: Four Thousand Eight Hundred

ZOLOTO MAKE ONLY) G.S.P.H.C APPROVED BRAND Sixty Five and Paise Fifty only

143 Making connection of galvanised Mild steel distribution branch with galvanised mild steel 1.00 Rmt 878.85 RS: Eight Hundred Seventy Eight

main 50mm to 80mm nominal bore by providing and fixing tee including cutting and and Paise Eighty Five only

threading the pipes complete.All Floor

144 Constructing brick masonary chamber for under ground C.I inspection chamber and 10.00 Nos. 3793.18 RS: Three Thousand Seven

bends with block having crushing strength not less than 50 kg/cm2 in C.M.1:5 RCC top slab Hundred Ninty Three and Paise

with 1:2:4 mix ( 1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Eighteen only

with 8mm dia steel at 15cm C/C and providing & fixing precast RCC cover foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete etc. complete Rate are also

inclusive of outside plaster 15 mm thick in C.M 1:3 from top of chamber and all side upto

15cm deep below ground level.(i) inside dimention 455 mm * 610 mm and 450mm deep

for single or multipurpose pipe line

145 Extra over above item no-144 for additional depth 0.1mt. or part there of beyound 30.00 Nos. 239.99 RS: Two Hundred Thirty Nine

450mm depth for brick masonary chamber for 455 mm * 610 mm size and Paise Ninty Nine only

146 Const. brick masonary chamber for under ground C.I inspection chamber and bends with 17.00 Nos. 5476.93 RS: Five Thousand Four Hundred

block having crushing strength not less than 50 kg/cm2 in C.M.1:5 RCC top slab with 1:2:4 Seventy Six and Paise Ninty Three

mix ( 1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) with 8mm only

dia steel at 15cm C/C and providing & fixing precast RCC cover foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete Rate are also inclusive of outside

plaster 15 mm thick in C.M 1:3 from top of chamber and all side upto 15cm deep below

ground level.(i) inside dimention 600 mm * 850 mm and 450mm deep for single or

multipurpose pipe line

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

147 Extra over above item 146 for additional depth 0.1mt. or part there of beyound 450mm 51.00 Nos. 322.37 RS: Three Hundred Twenty Two

depth for brick masonary chamber for 600 mm * 850 mm size and Paise Thirty Seven only

148 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 Structured 70.00 RMT 229.00 RS: Two Hundred Twenty Nine

Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing only

ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3

including all local and central taxes, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the departmental stores etc. complete. (100mm

ID Dia) Including Lowering, laying and jointing of class SN 8 structured wall ( External

Annular Corrugated .....

149 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 Structured 220.00 RMT 396.00 RS: Three Hundred Ninty Six

Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing only

ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3

including all local and central taxes, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the departmental stores etc. complete. (150mm

ID Dia) Including Lowering, laying and jointing of class SN 8 structured wall ( External

Annular Corrugated .....

150 4.00 SMT 593.90 RS: Five Hundred Ninty Three

HALF BRICK WORK using common burnt clay building bricks having crushing strength not

and Paise Ninty only

less than 35 Kg./Sq. cm.Super Structure above Plinth level in cement mortar 1 : 4 (

cement : 4 coarse sand) conventional Bricks. For Foundation & Plinth.

151 Providing and laying Controlled cement concrete M-200 and finishing smooth with curing etc.. 1.00 Cumt. 8680.25 RS: Eight Thousand Six Hundred

complete including the cost of plywood formwork only with fair finish exculding the cost of Eighty and Paise Twenty Five only

reinforcement of BEAMS having any cross sectional area of Beam For GROUND FLOOR. Rate

are also inclusive of providing and mixing Plasticizer of approved make in proportion as Per Mix

152 Providing & Laying Controlled Cement Concrete M-200 & and finishing smooth with Curing 3.00 Cumt. 7594.35 RS: Seven Thousand Five

Complete including the cost of plywood formwork only with fair finish but excluding cost of the Hundred Ninty Four and Paise Thirty

reinforcement for RCC Work in SLAB having thickness of 13cm TO 15cm at GROUND FLOOR. Five only

Rate are also inclusive of providing and mixing Plasticizer of approved make in proportion as Per

Mix Design.

153 Providing 20 mm thick SAND FACED cement Plaster on walls above ground level 1073.00 SMT 332.33 RS: Three Hundred Thirty Two

consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thick and Paise Thirty Three only

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height. Mortar shall

be prepared by mixture machine only. Plaster should be done by gutkha only.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

154 Providing and fixing precast R.C.C. Cover including angle frame of 40mm x 40mm x 5mm 1.00 Nos. 1702.00 RS: One Thousand Seven

section and C.C.1:1.5:3 precast I.C.Cover for chamer etc.including 8mm HYSD steel at Hundred Two only

15cm c/c both way and oil painting of angle frame and finishing of concrete with C.M.1:3

etc. complete. Finished dimension of concrete cover shall be 0.60m x0.45 x0.07m

size.Rates are inclusive of cost of angle frame, einforcement, concrete, finishing work and

two pieces of M.S.flat 25x3mm size as a handle.

155 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 270.00 Rmt 358.06 RS: Three Hundred Fifty Eight

30cm length,30cm height and 15cm thick of M-250 grade concret as per approved design and Paise Six only

and including excavation for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etccomplete.

156 Providing and Fixing Precast Rubber Dye Interlocking Concrete block 60mm thick with 320.00 Smt 680.10 RS: Six Hundred Eighty and

grade of concrete M300 Puumatic compressed by Mechanically pressed and as per Paise Ten only

approved design including 75mm Sand layer for levelling and filling the joint with Sand in

proper line and level etc. complete.

157 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 30.00 Cumt. 4712.94 RS: Four Thousand Seven

complete including cost of formwork but excluding the cost of reinforcement in Foundation Hundred Twelve and Paise Ninty

Footing and mass concreteRates Are Inclusive Of Providing & Mixing Plastisizer Of Four only

Approved Make & In Proportion As per mix design.

158 26.00 Cumt. 8020.52 RS: Eight Thousand Twenty and

Providing and laying controlled cement concrete M-300 including finishing smooth with Paise Fifty Two only

curing complete including cost of formwork but excluding cost of reinforcement in vertical

& horizontal WALL having any thickness for FOR ANY HEIGHT .Rates Are Inclusive Of

Providing & Mixing Plastisizer Of Approved Make & In Proportion As per mix design.

159 Providing and fixing window having extruded aluminum Colour anodized section frame main outer 2.00 smt 1902.50 RS: One Thousand Nine Hundred

size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three Two and Paise Fifty only

track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt),

vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details etc

160 24.00 Nos. 201.74 RS: Two Hundred One and Paise

Providing and fixing cast iron steps of size 500mm X 150mm X 22.5mm and painting with

Seventy Four only

two coats of anticorossive paint etc. complete

161 Box Cutting the road surface to proper slope & camber for making a base for road work 210.00 Cumt. 103.17 RS: One Hundred Three and

including removing the excavated stuff & depositing on the road side slop as directed upto Paise Seventeen only

50Mt. lead

162 Rolling and consolidation water bound macadam (except laterite and Kankar)including 1510.00 smt 20.79 RS: Twenty and Paise Seventy

watering not exceeding 15mm thickness (Main layer including binding materials) including Nine only

filling in depression which occur during the process. (b) With power roller 8 tonne and not

exceeding 12 tonne.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

163 Providing,Laying and Fixing 25mm thick expansion joint by hydro cell semi-rigid UV 6.00 SMT 738.13 RS: Seven Hundred Thirty Eight

resistance with high high performance laminated closed cell polythene foam joint filler in and Paise Thirteen only

sheet foam as directed etc. complete

164 Providing and fixing premoulded compressible filler board in 68.00 SMT 788.78 RS: Seven Hundred Eighty Eight

black colour confirming to MoRT&H Specifications (Clause 1015), having minimum density and Paise Seventy Eight only

95kg/cum, non-staining with less than 1% water absorption & compression recovery of 93%

minimum as per specification for 20 mm wide expansion joint including cutting to required

size and shape at all levels etc.complete as directed.

165 Construction Of Concrete Road Using Trimix System Having of any Thickness M-300 154.00 Cumt. 4565.56 RS: Four Thousand Five Hundred

Ready Mix Concrete With Providing And Fixing & Removing Of "C" Channel Having Size Sixty Five and Paise Fifty Six only

75Mm. X75Mm As Per Required Level Slope And Thickness Of Concrete Road Floor

Levelling Of Place Concrete With Surface Vibrator Machine,Dewatering System Device

Finishing With Power Floater Machine And Trowel Light Brooming On The Surface As

Directed With Providing Expansion Joint Size 20 X 190Mm. Using Of Concrete Cutter

Machine Including Curing Etc. Complete.rate are also inclusive of providing and mixing

plastisizer of approved make in proportion as per mix design.

166 Providing & Making cutting the road surface of any required depth & thickness with 110.00 Rmt 36.80 RS: Thirty Six and Paise Eighty

machine cutter etc.complete as per direction of engineer incharge. only

167 Providing, Supplying & Laying Granular Sub Base (GSB) by providing M.C. coarse graded material, 210.00 Cumt. 1386.84 RS: One Thousand Three Hundred

spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method Eighty Six and Paise Eighty Four

with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete only

as per MORTH specification.

168 Providingand laying Two level or slopes) and jointing reiforced concrete light duty, non 60.00 Rmt 237.83 RS: Two Hundred Thirty Seven

pressure pipes I.S.Class NP-2 of the following diameter with collars and butt ends prepared and Paise Eighty Three only

for collar joints, including testing of pipes and joints etc. complete. (E) 150 mm. Dia.

169 Supplying of H.B.Metal of following sizes. (for W.B.M.) (II) H.B.Metal 40 to 63mm. 50.00 Cumt. 1034.68 RS: One Thousand Ten Hundred

Thirty Four and Paise Sixty Eight

170 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to 50.00 Cumt. 247.28 RS: Two Hundred Forty Seven

required camber and gradient (excluding spreading of blindage) (II) 40 to 63 size and Paise Twenty Eight only

aggregates

171 Supplying of Graded hand Broken stone aggregate for WBM Road of size 25mm to 50.00 Cumt. 991.93 RS: Nine Hundred Ninty One and

50mm including conveyance charges for any lead and lift. Paise Ninty Three only

172 Spreading of graded hand broken stone aggregate for Soiling WBM road of size 25 mm to 50.00 Cumt. 247.28 RS: Two Hundred Forty Seven

50 mm. and Paise Twenty Eight only

173 Supplying of murrum binding materials on W.B.M surface etc complete. 20.00 Cumt. 305.80 RS: Three Hundred Five and

Paise Eighty only

174 Spreading blindage or road crust filling the gapes in metal and levelling to camber and 20.00 Cumt. 146.01 RS: One Hundred Forty Six and

gradient as directed (I) Murrum. Paise One only

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

175 providing pre-moulded asphalt filler joints as per drawing (A) 12mm 377.00 Rmt 695.17 RS: Six Hundred Ninty Five and

Paise Seventeen only

176 providing & Fixing 25mm Dia backup rod of having minimum density 22KG per Cum(ASTMD- 80.00 Rmt 17.48 RS: Seventeen and Paise Forty

3575) & Compression strength of 0.40 kg per sqm (ASTM- 5249) and finishing with polysulphide Eight only

etc. For 25mm wide Expansion joint.

177 providing and corrogulated JSW pre coated sheet roofing fixed withh galvanised iron J or 330.00 smt 1015.76 RS: One Thousand Ten Hundred

L hooks, bolts and Nuts 8 mm dia with bitumin and G.I. Limpet washer or G.I. limpet washer Fifteen and Paise Seventy Six only

with white lead complete excluding the cost of Purlines , rafters and trusses(0.60mm thick)

178 Drilling of pilot bore hole in all strata by mud flush DR rig 250 mm diameter with lowering 100.00 Rmt 749.00 RS: Seven Hundred Forty Nine

of pipes, including jointing, only

welding etc. labour of cement slurry, sand and gravel packing and development of bore with

air compressor of required capacity vertically etc. complete bore shall stand up un-ceased

at least 71 hours complete.

179 100.00 Rmt 347.00 RS: Three Hundred Forty Seven only

Reaming of 250 mm diameter pilot bore including assembling, lowering, housing, casing

stainer pipes with gravel packing, clay packing etc. 550 mm diameter

180 Manufacture, supply and delivery of ISI marked ERW M.S. pipes conforming to IS: 100.00 Rmt

RS: Two Thousand Four Hundred Seven only240700.00

4270/2001 with latest amendment

Rates are exclusive of (A) 200 MM DIA (MINIMUM 6.00 MM THICK)

181 Steel bent plate suitable to 250 mm diameter ERW pipes 50.00 Nos. 90.80 RS: Ninty and Paise Eighty

etc. size 200 X 150 X 6 mm etc. complete. only

of work etc. complete only

183 Supplying of Portland cement at store or site of work including all taxes, loading, unloading, 2.00 M.T 6302.00 RS: Six Thousand Three Hundred

carting insurance etc. complete Two only

184 Supply of Clamps made from M.S. plate with three holes on either sides with bolts and nuts 1.00 Nos. 2017.73 RS: Two Thousand Seventeen

and washers of standard and approved make size 900mm X 100mm X 16 mm flat suitable and Paise Seventy Three only

for 250mm diameter

pipes etc. complete

185 Supply of M.S. Bail plug having length of 0.45 m from medium class pipe suitable for 250 1.00 Nos. 1054.48 RS: One Thousand Ten Hundred

mm diameter pipes etc. complete. Fifty Four and Paise Forty Eight only

186 Supply of Bore Plug having 100 mm height made fromM.S. plate with three holes at equal 1.00 Nos. 1150.12 RS: One Thousand One Hundred

distance on circumferences for nuts, bolts type locking arrangements of standard make Fifty and Paise Twelve only

suitable for 250 mm internal diameter pipes etc. complete.

187 Cement Sealing by means of mud pumps without cost of Cement etc. complete. 1.00 job 13273.00 RS: Thirteen Thousand Two

Hundred Seventy Three only

188 Supply of Clay balls size of 25mm to 35 mm diameter made from sticky clay etc. complete 5.00 Cumt. 751.00 RS: Seven Hundred Fifty One

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

189 Development of each water bearing zone coming across up to the depth of bore well ( tube 1.00 job 27777.00 RS: Twenty Seven Thousand

well ) ( size 200/250/300 mm DIA DEPTH MORE THEN 150METER)of by lowering 100 mm Seven Hundred Seventy Seven

diameter drop line and 32 mm diameter G.I. air line for each zone with suitable only

capacity Air Compressor up to availability of sand free discharges (without air cmp.charge)

190 Conduction Electro logging test 200 mm dia bore hole including carting & idle-houras 1.00 Hr 12000.00 RS: Twelve Thousand only

directed by the Engineer - in -charge etc. complete.

191 Charges of Air Compressor capacity of 900CFM 200PSI etc. complete for 6.00 hours job 1.00 Hr 27330.00 RS: Twenty Seven Thousand Three

etc. complete Hundred Thirty only

192 Pumping test of the tube well by 70.00 H.P. submersible pump test with D.G. set for 72 1.00 job 36607.00 RS: Thirty Six Thousand Six

hours etc. complete. Hundred Seven only

193 Geophysical survey for pin point for bore well including survey done by GSSWB department 1.00 job 14286.00 RS: Fourteen Thousand Two

with ralay repail of pin point location including fees to GSSWB department & Hundred Eighty Six only

Transporatation charges..

194 Making connection of galvanised Mild steel distribution branch with galvanised mild steel 1.00 Nos. 1500.00 RS: One Thousand Five Hundred

main 50mm to 80mm nominal bore by providing and fixing tee including cutting and only

threading the pipes complete.SECOND FLOOR

195 Providing and laying Controlled cement concrete M-200 and finishing smooth with curing 20.00 Cumt. 5849.63 RS: Five Thousand Eight Hundred

etc.. complete Including the cost of form work of plywood only with fair finish & proping must Forty Nine and Paise Sixty Three

be of steel only so as to give a fair finish but exculding the cost of reinforcement for only

COPING . Rate are also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

196 Providing & Laying lawn for Land Scaping including watering & all labours. 655.00 smt 150.00 RS: One Hundred Fifty only

197 Providing and laying Tree Plantation including providing and fixing Tree Guard. Rate also 150.00 Nos. 600.00 RS: Six Hundred only

inclusive of maintaning the Tree Plantation in live condition at the time of completion of

work and handing over of tree plants. Tree to be planted well in time.

198 Providing ,layig, testing , & commissoning of 'C' class heavy duty MS pipe confirming to IS 80.00 Rmt 3606.90 RS: Three Thousand Six Hundred

3589/IS 1239 including welding , fitting like elbows tees, flanges tapers,nut bolts,gaskets Six and Paise Ninty only

etc, and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting

with two or more coats of synthetic enamel paint of required shade & Anticorrosive

treatment with coaltar/asphalt tap as per IS 10221 refilling trench etc complete as

required.150 mm dia pipe

199 Providing ,layig, testing , & commissoning of 'C' class heavy duty MS pipe confirming to IS 80.00 Rmt 2581.50 RS: Two Thousand Five Hundred

3589/IS 1239 including welding , fitting like elbows tees, flanges tapers,nut bolts,gaskets Eighty One and Paise Fifty only

etc, and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting

with two or more coats of synthetic enamel paint ofrequired shade complete as required.100

mm dia pipe

200 Supply ,fixing,,testing and commisioning of Butterfly valves( heavy ) conforming to ,PN 1.6 3.00 Nos. 6101.15 RS: Six Thousand One Hundred

rating with bronze/gun metal seat duly .ISI marked complete with nuts,bolts,washers, One and Paise Fifteen only

gaskets,and confirming to is 13095of following size as required .100 mm dia

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

201 Supplying, installation testing and commissioning of non return vlve of following size 3.00 Nos. 9945.68 RS: Nine Thousand Nine Hundred

conferming to IS 5312 Compltet with Rubber gascet GI Bolt Nutes Washer etc Forty Five and Paise Sixty Eight only

202 supplying and fixing single headed internal hydrant valve with instaneos gun metal/stainless 3.00 set 6139.00 RS: Six Thousand One Hundred

steel coupling of 63 mm dia with cast iron wheel ISI marked confirming to 5290 (type A) with Thirty Nine only

blank gun metal /stainless steel cap and chain as required,(a) single headed stainless steel.

203 Supplying and fixing 63mm Dia Stainless Steel Grae-304 Short Brach Pipe With 20mm 3.00 Nos. 6886.72 RS: Six Thousand Eight Hundred

Nominal Intel Daimeter Size Nozzele Conferming to IS-903 Suitebale For instnta Eighty Six and Paise Seventy Two

Connection to Inner Connect Hose pipie Connection. only

204 supplying and fixing 63 mm dia 15 mt. long RRL hose pipe with 63 mm dia male and female 3.00 set 3916.23 RS: Three Thousand Nine

coupling duly bound with GI wire rivets etc confirming to IS 636(type A) required ,stainless Hundred Sixteen and Paise Twenty

steel (grade 304) Three only

205 Fire hose cabinet (600*450*250)mm providing fixing testing and commissioning weathere 3.00 Nos. 3453.00 RS: Three Thousand Four

proof standard fire hose cabinet stand mounting type having single opening with M S Hundred Fifty Three only

fabricates stand cabinet make with 18 gayge ms sheet necessary locking. Rates are

inclusive of material ,labour etc...

206 supplying and fixing first -aid Hose reel with MS construction spray painted in post office 3.00 Nos. 7920.84 RS: Seven Thousand Nine

red,confirming to is 884 complete with the following as required.20mm nominal internal dia Hundred Twenty and Paise Eighty

water hose thermoplastic (textile reinforced)type-2 as per is-12585 20 mm nominal internal Four only

dia gun metal globe valve & nozzle. Drum and baskets for fixing the equipments on

wall.connection from riser with 25 mm dia stop gun metal valve & M.S pipe and socket.30

207 Supply, Installation, Testing & commissioning of 25 mm dia gun metal ISI mark Gate Valve . 3.00 Nos. 608.08 RS: Six Hundred Eight and Paise

Including all Fitting. Eight only

208 Providing and Fixing Fire Brigade Connection of Cast Iron Body With Gun Matel male 1.00 Nos. 12435.20 RS: Twelve Thousand Four

Instateneous inlet coupling with cap and chain as read. For Suitable dia M.S Pipe Hundred Thirty Five and Paise

Connection Conferming to IS 904 as Required ( 4 Way 150mm M.S Dia Pipe) Twenty only

209 Design Supply And Instolattion of Safty Signegs made of Zinc Sulfied base glow in the Dark 1950.00 Sq.inch 7.95 RS: Seven and Paise Ninty

Rigid Sheet with High luminiues Properties Inclusing Trasperntwhether Proof U/V Stabilized Five only

Platic Pasted on 2mm,3mm thick Clear Acylic Sheet Emergengy Exite Do Not Use Lift in -

case of Fire bFloor Marking Fir Lift Stair Exite Fire Hydramt Point Fire Extinguisher Fir

Aelaram, Call etc.

210 Getting provisional NOC and Final NOC and Renewal of NOC (During Defect Liability 1.00 Nos. 16950.00 RS: Sixteen Thousand Nine

Period) for Fire Hydrant,Sprinkler system, Fire Extinguisher, Fire alarm system etc. from Hundred Fifty only

local fire authority or any other relevant statutory authority at initial stage and required

various other stages of construction work, including preparation of reports/drawings as per

fire authority requirement. Rate also includes renewal of Fire NOC during defectliability

period as per requirement. Main agency has to give demonstration of all fire ...........

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

............system to fire officer police / concern beneficiaries & GSPHCL. Agencyhas to

submit FDR of approved bank as per clause 2.0, section 3, of Rs 20000.00 Or Quoted rate

which ever is higher to GSPHCL for minimum maturitperiod of Four yearsin favour of

GSPHC, which will be released after Successful Submitting of All Fire

NOcatthecompletionofdefectliabilityperiod.Renewal FireN.O.C. shall be submitted final

S.D.proposal...........

...........Agency hasto

bornechargeslikepreparingandsubmissionofallthedocuments,Photographs,CD/DVDrequired

togetthe N.O.C. from concern fire department and also liaisoning work with concern

departments. Main civil agency has to get the pre-NOC from fire & emergency department

well beforestarting civil & the fire hydrant work including sump & pumproom work. For that

professional & experience fire agency has to prepare drawing of fire hydrant..........

.......... system, sprinkler system, fire alarm system, DGset etc. as per tender item and

making floor layout of all fire pump panel, cable earthing etc in pump room. If any changes

required in drawings of sump & pump room. Main agency has to inform in written before

excavation of pump & sump room. Agency has to calculate the total head & discharge

required as per NBC/local fire office requirement and as per sitesituation and submit fire

pump OEM specification curve foundation detail etc & get approval of cable, panel........

........drawings & specification. After completion of fire hydraunt related work as per pre-

NOC, tender specification & drawing approved by fire department, agency has to do site

visit with fire department & give the testing & demonstration to fire officer & get the final

NOC before handing over of the building. Agency has to give live testing & demonstration of

all system to GSPHCL & police department jointly. For fire NOC fee separate item is taken

in tender . Agency has to quote the rate as per latest Gazettein respective

tender item.fire noc

211 Supplying and installation of minimum 46 mm thick Fire rated door as per IS 3614:2021 30.00 sq.mt 11740.27 RS: Eleven Thousand Seven

standards made by galvanized steel conforming to IS 277 Fire door tested at CBR/NABL Hundred Forty and Paise Twenty

approved labs for maximum rating of 2 hrs tested . Test certificate submitted shall be with in Seven only

the validity period of 15 years .The frame and shutter are finished with powder coating of

micron of approved colour with all necessary fittings ( Fire door make approved by GSPHC)

212 Providing and fixing fire-resistant barrier in duct openings at slab level with fire stop sealant, 7.00 sq.mt 14088.98 RS: Fourteen Thousand Eighty

having minimum 2-hour fire rating, in compliance with NBC 2016 code. Eight and Paise Ninty Eight only

213 Providing, fixing, testing and commissioning of 15 mm dia quartzoid bulb type sprinklers of 12.00 Nos. 503.01 RS: Five Hundred Three and

ratings 68 degree centigrade with required accessories: Paise One only

214 Core Cutting using Diamond Core Cutter, up to 200 mm Diameter – Including drilling 3.00 Nos. 453.00 RS: Four Hundred Fifty Three

through RCC/brick masonry walls or slabs, complete with all labour, tools, equipment, and only

disposal of debris

Total Civil Amount (A) Rs.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

215A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC 260.00 Point 605.00 RS: Six Hundred Five only

insulted FRLS-H wire with 1.5 sq. mm (green) copper PVC insulated FRLS-H wire for earth

continuity in FIA approved ISI mark medium class white colour 20/25 mm dia. embossed rigid PVC

pipe with PVC fitting fixed with adhesive solution erected on/in Brick Wall / slab along with

continuous G.I. fish wire to draw wires and laid in approved manner zari for PVC pipe and boxes

shall be filled with cement mortar and finishing the surface to match the wall /..........

............. ceiling complete with approved make 5/6 Amp. ISI mark modular type switch and

accessories mounted in 20 G. G.I. company fabricated metallic box covered with appropriate front

plate modules erected flushed with wall / ceiling with necessary modular lamp holder / modular

ceiling rose / HD Connector 75 mm deep GI box as per requirement ( make & model approved by

EIC and matching colour with switches accessories) as directed for concealed wiring. Light point.

Cat.-III.........

.........(Conductor resistance should be as per IS:8130/1984 ) Necessary sheet cover must be

erected on all box to prevent mortar going into the box.& for ceiling light Point use deep Junction

box of same PVC Pipe make . Length of point wiring must not increase than 10 mtr. For that

necessary switch boards and their locations must be finalised before execution by agency ...........

.........otherwise payment will not be done for extra long point. (For future extention, if required,

agency has to erect one higher size metal box and modular plate as per instruction of EIC. Cost of

blank plate shall be paid as per tender item) [Wire must be having box packing][This item include

cleaning(inside/outside) of all GI switch boards,electric point box,fan box & box cutting plaster

arround modular plate without any gap] (Light Point Cat-III)

215B Secondary Point (Cat-III) 10.00 point 208.00 RS: Two Hundred Eight only

215C For Bell Point, Cat.-III 11.00 Point 605.00 RS: Six Hundred Five only

215D For Fan Point (with 6 A. Modular type switch and two module hum free EME Rotary Five step type 60.00 Point 842.00 RS: Eight Hundred Forty Two

electronic fan regulator both having ISI mark) Cat.-III only

215E For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-III 25.00 Point 636.00 RS: Six Hundred Thirty Six

215F For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark ) Cat.-III 100.00 Point 306.00 RS: Three Hundred Six only

216A Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID 1500.00 Mtr. 24.00 RS: Twenty Four only

PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed

with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains

with necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

216B For 25 mm. dia. 1500.00 Mtr. 33.00 RS: Thirty Three only

217A Providing & Erecting Mains with approved make FRLS-H PVC Insulated wire ISI marked 1.1 KV 1500.00 Mtr. 81.00 RS: Eighty One only

grade with FIA approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC pipe with

same company PVC fitting fixed with adhesive solution to be erected on/in brick wall / slab along

with continuous G. I. fish wire to draw mains Zari work & plastering by cement ..........

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

.........mortar & finishing the surface to match the wall / ceiling complete (Conductor resistance

should be as per IS:8130/1984 ) [a] 2 x 1.5 sq.mm. FRLS-H copper multi stranded conductor mains

with 1.5 sq.mm. FRLS-H copper multi stranded conductor for earthing as per standard colour

code. (with 20 mm dia. PVC pipe) [Wire must be having box packing]

217B For 2 x 2.5 sq.mm. FRLS-H copper multi stranded conductor mains with 1.5 sq.mm. FRLS-H 800.00 Mtr. 108.00 RS: One Hundred Eight only

copper multi stranded conductor for earthing as per standard colour code. (with 20/25 mm dia.

PVC pipe as per requirement) [Wire must be having box packing] (Conductor resistance should

be as per IS:8130/1984 )

217C For 2 x 4.0 sq.mm. FRLS-Hcopper multi stranded conductor mains with 2.5 sq.mm. FRLS-H 300.00 Mtr. 145.00 RS: One Hundred Forty Five

copper multi stranded conductor for earthing as per standard colour code. (with 20/25 mm dia. only

PVC pipe as per requirement) [Wire must be having box packing] (Conductor resistance should be

as per IS:8130/1984 )

217D For 2 x 6.0 sq.mm. FRLS-H copper multi stranded conductor mains with 2.5 sq.mm. FRLS-H 550.00 Mtr. 192.00 RS: One Hundred Ninty Two

copper multi stranded conductor for earthing as per standard colour code. (with 25 mm dia. PVC only

pipe as per requirement) [Wire must be having box packing] (Conductor resistance should be as

per IS:8130/1984 )

217E For 4 x 10.0 sq.mm. FRLSH copper multi stranded conductor mains with 4.00 sq.mm. FRLS 50.00 Mtr. 552.00 RS: Five Hundred Fifty Two

copper multi stranded conductor for earthing..As per standard colour code. (with 25/32 mm dia. only

PVC pipe) (Conductor resistance should be as per IS:8130/1984 )

218 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, 50.00 Mtr. 37.00 RS: Thirty Seven only

PVC bushes saddle, Check-nuts etc. complete of following sizes.

219 Providing and erecting Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 20.00 Point 930.00 RS: Nine Hundred Thirty only

sq.mm copper PVC insulated FRLS-H wire with 1.5 sq.mm (green) copper PVC insulated FRLS-H

wire for earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia. rigid

PVC pipe with same band PVC fitting fixed with adhesive solution erected in brick wall/slab along

with continuous G. I. fish wire to draw wires and make plaster zari for PVC pipe & boxes shall be

filled with cement mortar & finishing the surface to match the wall / ceiling complete with 16 Amp

Modular type Swich and accessories mounted in 20 G. GI company fabricated metallic box

covered with appropriate front plate modules erected flushed with wall. (a) 16 Amp. indicator switch

& 1 No. 6/16 A universal socket white colour suitable for 3 pin top duly both having ISI mark.

(Necessary Sheet Must Be Erected On All Box To Prevent Mortor Going In To The Box) Cat.-III.

220 Providing and erecting Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.00 sq.mm 10.00 Point 1087.00 RS: One Thousand Ten Hundred

copper PVC insulated FRLS-H wire with 2.5 sq.mm (green) copper PVC insulated FRLS-H wire for Eighty Seven only

earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia. igid PVC pipe

with same band PVC fitting fixed with adhesive solution erected on/in brick wall /slab along with

continuous G.I. fish wire to draw wires and make plaster zari for PVC pipe & boxes shall be filled

with cement mortar & finishing the ........

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

.........surface to match the brick wall / ceiling complete with 16 Amp Modular type Swich and

accessories mounted in 20 G. GI company fabricated metallic box covered with appropriate front

plate modules erected flushed with wall. (a) 16 Amp. indicator switch & 1 No. 16 Amp. universal

socket white colour suitable for 3 pin top duly. Cat.-III (Necessary Sheet Must Be Erected On All

Box To Prevent Mortor Going In To The Box)(AC/Gyser point)

221A Providing following type of Modular Type Accessories mounted with 20 G company fabricated 5.00 Each 159.00 RS: One Hundred Fifty Nine

metalic box, single mounting base frame covered with textured / metallic front plate, modules only

erected with necessary connection. As desired by Engineer in charge. a) TV Co-axial Socket outlet.

221B Two pin / RJ-11Telephone Socket (For One Gang) Cat III 20.00 Each 159.00 RS: One Hundred Fifty Nine

221C Blank Plate Single. Cat.-III 500.00 Each 25.00 RS: Twenty Five only

221D Modem Jack for Computer Open RJ-45 Cat III 35.00 Each 159.00 RS: One Hundred Fifty Nine

221E 16Amp. Universal socket. Cat.-III (For AC Points) 6.00 Each 198.00 RS: One Hundred Ninty Eight

221F 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete Cat.-III 6.00 Each 493.00 RS: Four Hundred Ninty Three

221G Modular indicating call bell Cat.-III 11.00 Each 326.00 RS: Three Hundred Twenty Six

221H Modular Buzzer Cat.-III 11.00 Each 148.00 RS: One Hundred Forty Eight

222 Providing & erecting Switch board for Computer or electric apparatus consisting of following items 35.00 Each 1122.00 RS: One Thousand One Hundred

in single board erected on 20 G. G.I. company fabricated metallic box erected with appropriate Twenty Two only

front plate modules erected flushed with wall as directed. 1 no. 6/16 Amp. universal Socket, 1 no.

13 Amp. international socket, 2 nos. 16 Amp. indicator switch, 2 nos. 6 Amp. Switch & 2 nos.

Amp. 5 pin Plug. For Computer power Supply board. Cat.-III

223 Providing & erecting Modular type accessories mounted on 20 G. G.I. company Fabricated 5.00 Each 788.00 RS: Seven Hundred Eighty Eight

Galvanised Metal box covered with appropriate front plate modules erected flushed with wall / only

ceiling with 1 nos of 16 Amp. SP switch & 3 nos. of 6 Amp. 3/5 - pin plug: Cat-III (For TV Switch

224 Providing and Erecting following size of TV Co-axial flexible cable comprising inner conductor of 250.00 Mtr. 39.00 RS: Thirty Nine only

solid bare copper insulated with Foam PE & Secondary conductor made of poly – Aluminium film

bonded Al. Braids @ coverage of 65% overall sheated with black PVC insulation a. RG-6

225 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft 10.00 Each 6000.00 RS: Seven Thousand Twenty

soil. Suitable for pipe-in-pipe technology earthing.Earth electric rod must be made from Corrosion Five only

free Hot dip galvanizing pipes having following specification.

(A) Earth Electrode: outerpipe:- minimum 88mm O.D ,'B ' Class ISI mark of Reputed Brand, Inner

pipe:- 42 mm minimum O.D, Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X 100mm

length, Terminal Should be made from inner pipe for that pipe must be pressed and give

rectangular shape so its work as a terminal.The hot deep galvanising must be ..........

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

.........done after above process.Galvanised thickness must be minimum 75 micron any where. SS

Nut bolt:- 2 no.with washer suitable for 14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive material should be 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound :-..........

........Earthing compound should be capable to retain moisture for long time Back Filling Compound

weight is 25 Kg. Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Make & Model to be ........

...........approved by EIC) OEM has to submit all detail & sample for approved before supplying }

Water must be poured in bore before starting earthing. Earthing value must be measured with

earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between

neutral &Earthingupto 02 volt. Agency has to maintain earthing& its value for one year. If required.

Earthing must be done in the presence of A.E.

should be size of 400mmX400mmX400mm depth and Cover should be heavy duty cast iron with

required size of 300mmX300mmX4mm thick.

225C For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in 10.00 Each 325.00 RS: Three Hundred Twenty Five

earth pit (certificate for soil have to given by DEE / AE along with photographs) only

226 Supplying and erecting 8W led lamps with following wattage capacity of 220 to 240 voltage, 20.00 Each 111.00 RS: One Hundred Eleven

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting only

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 LED Lamps integral type, with PC diffuser

suitable LAMP holder

227 Supplying and Erecting LED indoor fitting having 1100mm long with LED of wattage Mashroom 10.00 Each 370.00 RS: Three Hundred Seventy

shape 0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made only

from white powder coating Aluminum extrusion having enough strength (sample must be approved

by EIC)with polycarbonate diffuser with following specification:

(A) Company .........

......mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15%

(G) Rated Luminous......

....... flux: Min. 2420 lm

(H) CCT: 6500K

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70 (Certificate shall be attached)

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing Clamp min.12mm wide heavy duty design & strength should be sufficient to hold the

fitting erected on wall or ceiling (R) 3 core x

.........copper wire with min. 1ft (300mm) earthing connector.

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture) [Approval will be given strictly subject to item

specification]

228 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W Cool/Natural white/Warm 166.00 Each 1159.00 RS: One Thousand One Hundred

(6K/4K) white Color back lit LED Down lighter with BIS approved separate potted driver with single Fifty Nine only

piece pressure die cast aluminium alloy housing (no plastic part allowed) with corrosion resistant

powder coated finish with PMMA/PS/Injection moulded Polycarbonate diffuser with high brightness

LED complete (LED from Philips Lumileds, CREE, Nichia, Bridgelux,......

.......... Seoul & Osram) CRI > 80, CCT 6K/4K. The LED's should be mounted on back lit metal core

PCB for better heat conduction and long life of LED. Test report of shall be submitted (LM 79 for

complete fixture, for individual LED). The Fixture have protection like miswiring, over voltage, over

load , IP20 wrong wiring, THD < 15%,, P.F > 0.95, efficiency ≥ 100 lm/w & driver........

.......... efficiency > 85%. For 24 W fixture wide voltage range from 180 V to 270 V, 50/60 HZ @

240V, 4 KV surge protection.

The fixure must have min. 2400 lumen light output. The fixture should be provided with external

separate Potted driver, latest Valid BIS approved Luminaire and driver. The Fixture efficiency ≥

lumens/watt only for safety and performance. (L70 @ 50,000 Hrs.) The fixture should be .....

.............able to easily mount on POP / Grid false ceiling. The Luminiare should be tested as per IP

20 and following test reports should be submitted at the time of approval: heat resistant test,

thermal test, Ingress protection test, IK test, Photobiological report with 3 core X 1.0 Sq.mm. flexible

wire as per site requirement [Note:-The manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs. free replacement Guarantee for complete Fixture

229 SITC of Indoor Commercial Recess / Surface mounted (IP20) maximum 18 W Cool/Natural 40.00 Each 1027.00 RS: One Thousand Ten Hundred

white/Warm white Color LED Down lighter office Lighting Luminaire with separate potted driver with Twenty Seven only

single piece pressure die cast aluminium alloy housing with corrosion resistant powder coated finish

with PMMA/PS/Injection moulded Polycarbonate diffuser with high brightness LED complete (LED

approx.6K/4K from Philips Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram) CRI > 80, CCT

5600K (5400 to 5800K bin). The.........

.......... LED's should be mounted on back lit metal core PCB for better heat conduction and long life

of LED. The Fixture should comply all International Standarad third party (LM 79 for complete

fixture, LM80 for individual LED). The Fixture have protection like miswiring, over voltage, over load,

wrong wiring, THD < 15%,, P.F > 0.95, efficiency ≥ 100 lm/w & driver efficiency > 85%. For 18 W

fixture wide voltage range from 180 V to 270 V, 50/60 HZ @ 240V application, 4 KV surge

protection.

The fixure must have min. .......

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

..........1800 lumen light output. The fixture should be provided with external separate Potted driver,

latest Valid BIS approved Luminaire and driver. The Fixture efficiency ≥ 90 lumens/watt only for

safety and performance. (L70 @ 30,000 Hrs.) The fixture should be able to easily mount on POP /

Grid false ceiling. The Luminiare should be tested as per IP 20 and following test reports should be

submitted at the time of approval: heat resistant test, thermal test,.......

........ Ingress protection test, drop test, Photobiological report with 3 core X 1.0 Sq.mm. flexible wire

as per site requirement [Note:-The manufacturer / authorized Channel partner of the manufacturer

has to submit 5yrs. free replacement Guarantee for complete Fixture

230 Providing and erecting max. 10 watt LED battern having main housing having powder coated 7.00 Each 309.00 RS: Three Hundred Nine only

aluminium extruded & mashroom shape polycarbonate diffuser. Electrically & photomatry

parameters are as undr: 240 V, 50 Hz, System wattage 10 w ± 10 %, PF ≥ 0.95, system luments

min. 1000, CCT- 3000K to 6500K, CRI ≥ 80, THD ≤ 15%, delivery efficiency ≥ 85%, L80

Certified......

......... LED, 30000 hrs. @ L70, Electronic CC driver, 3 core insulated copper wire for internal wiring,

IP20, operating voltage: 160 to 270 V, Surge - 2 KV, Fixing Clamp min.12mm wide heavy duty

design & strength should be sufficient to hold the fitting erected on wall or ceiling,Length of fitting

should be min.600mm,3 core x 0.5 Sqmm copper wire with min. 1ft (300mm) & earthing connector.

231 providing and erecting Polycarbonate body surface mounting LED Bulk head type 9 watt Lighting 5.00 Each 780.00 RS: Seven Hundred Eighty

Fitting with electronic driver having THD<15% ,CRI>80,P.F.>0.95 And lumen output from luminaire only

800lm , IP 54 protection ,input voltage range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt

driver having THD > 80lm/w., -20degC to +60degC working temperature, AL frame with Beam

Angle 120deg.

232 supplying & erecting 30 W LED POST TOP LATTERN fitting with high power white LEDs wattage 8.00 Each 3444.00 RS: Three Thousand Four

of 1 ww and above assebled on single MCPCB's effiency more than 130 lumens per watt and Hundred Forty Four only

corrosion free high pressure diecast alluminium housing with smooth finish powder caoted and heat

sink extruded alluminium with difuser and poly carbonate optics/ lences..........

..........with compny mark / name /engraved or embossed 120 to 300 volt, power factor more than

0.95, THD < 10%, CCT 5000K to 5700K , Uniformity ratio > 0.45, Luminure efficency Min

lumens per watt. LED Driver efficency > 85%. Cree/osram/philips Lumileds/Nichia /Seoul/Bridge

Lux (USA) make LED used for luminare ( Each Fitting required LM 79 and LM-80 certificates) (B)

Flood Light(IP-65)Surge-10KV.(E)Post Top Latern LED Fitting Comprises ........

..........of 650 MM TOP diameter 120 degree beam angle with 3 Nos supporting ribs proposed for

garden & Promenade. maximum 40 WATT, (Note:- The manufacturer/authorized Channel partner

of the manufacturer has to submit 4yrs free replcement Guarantee for complete Fixture)

233 Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 Star rated, Max. 30Watt 60.00 Each 2603.00 RS: Two Thousand Six Hundred

Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of Three only

insulation: B/E, Double ball bearings, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle

kit with earthing provision, copper winding, Power factor not less than 0.9, Service Value (CMM/W)

minimum 7.5, Air delivery minimum 220 CMM, Minimum 345 RPM,.......

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

..........230v (tolerance as per IS : 374 2019), THD less than 10%, compitible with electronic

regulator unit for Five Speed Control and all remaining accessories including safety pin, nut bolts,

washers, temperature rise equal to 75 degree C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply,

earthing etc. Complete as required.Down road: up to 1.0 mtr as per site requirment.

(A) 1200 mm Sweep (48") ( Make Havells Efficiencia Dx , Bajaj Energos 28 & Crompton make &

model approved by EIC suject to above specification )

234 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the RCC bars up to 50 mm 60.00 Each 125.00 RS: One Hundred Twenty Five

Length each side & piereced through 16 Gauge G.I Box having 125 mm dia & depth of 75 mm only

complete erected concealed in ceiling with necessary modular type Round plate

235 Supplying and erecting approved make oscillating type bracket fan A.C. 230 V. 50 cy/s 400/450 2.00 Each 2509.00 RS: Two Thousand Five Hundred

mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, Nine only

flexible Core plug top complete erected with lead wires as directed. Cat II

236 Supplying and erecting 19 / 20 mm. nominal bore "B" Class G.I Pipe /M.S. Pipe down rod erected 50.00 Rn. Mtr. 107.00 RS: One Hundred Seven only

duly painted for fan complete with necessary 24/0.2 flat 3 core flexible cable with earthing.The

Down rod thickness,hole,locking arrangement,construction,power coating,colour shed should be

match as original down rod brought with ceiling fan......

...........For that agency has to give original down road sample to fabricator and one sample down

rod should be approved with EIC .After approval given by EIC agency can use the down rod as per

approved sample.If without approval down rod will be erect on site,agency has to replace them with

own cost.(No vibration or wobbling of fan while rotating)

237 Supplying & erecting approved make low noise Decorative exhaust fan having size 250 mm with 10.00 Each 1687.00 RS: One Thousand Six Hundred

1350 RPM with round / square frame ABS/metalic body with Grill and inbuilt lowers. Eighty Seven only

238 Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty 2.00 Each 3052.00 RS: Three Thousand Fifty Two

ring mounted low noise operation suitable for medium duty having following dia size and maximum only

speed:380 mm dia 1400 RPM

239 Providing & Erecting Decorative Dig Dong bell Stereo type 250 Volt complete erected on existing 11.00 Each 170.00 RS: One Hundred Seventy

polished wooden block or in M.S. box with 3mm thick white ISI mark laminated sheet. (Anchor- only

Chime model,Rider,Vision)

240 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted with red oxide be concealed 800.00 Sq. Inch 5.94 RS: Five and Paise Ninty Four

in wall with necessary plastering & finishing with 3 mm thick laminated sheet with grooving as only

directed of following depth 3" depth.

241 Desiging,fabricating,testing electrical panel (switch board) at manufacuturer's workshop and 6.00 Sq. Mtr. 21500.00 RS: Twenty One Thousand Five

Providing & erecting at site. Panel should be weather proof, dust & vermin proof, floor mounted Hundred only

front operated cubical panel board having IP-54 made from 2 mm. thick CRCA M.S. sheet for outer

body,gland plate & doors, 1.6 mm. thick CRCA M.S. sheet for internal partitions with necessary

supporting angles, flats including skirting, bending, drilling, welding, riveting ........

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

.........with internal partitions & cable alley,rubber gromets, rib, control wires, backelite control fuses

as per requirements,sufficient nos. of hinges for doors, door locking arrangement, rubber gasket

complete with Required Nos. heavy Duty Connector with Cadmium plated nut and bolt for Anti

rusting and Al.busbar for earth, nuts/bolts,washer etc as per instruction of engineer-In-Charge.

Cost of supplied item like switchgears, LED indicator ,CTs , busbars and PVC FRLS copper wire

with suitable size for power interconnection,measuring instruments, foundation flange-bolts-base

plates, cost of C channel/angle iron stand .........

............(1ft to 2ft height as per cable size)shall be excluded of panel fabrication.Specification of

suppiled items is attached seperatly.The panel shall be supplied with Seven Tank chemical

process. which shall be carried out before applying painting, painted with powder coating. (The

rates excludes the cost of switchgears, busbars, interconnecting mains & Copper / Aluminium strip,

fuse, meters etc. The dimension shall be measured .......

..........excluding base beams.switchgear of approved brand and specification shall be used and

erected at CPRI approved panel manufacturers only. Busbar compartment must be separate for

easy termination of tails/cables and to avoid least distance of punching holes in busbar. Panel

depth shall be 350 mm.

Panel manufacturer have to give 4 years service support if in case of breakdown or fault. Panel

manufacturer have to submit electrical meter calibration report. Agency should design the panel in

such a way that there should not be any excess in panel area (sq.mtr) & length of bus-bar (mtr), if

any excess is need to be done agnecy has to draw attention to GSPHCL .......

..........at the time of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and skill work force under supervision

of electrical engineer and guidelines given by manufacturer to avoid damage to the item.

Size of door and Ele. room / Pump room shall be measure and provide to panel manufacturer to

prepare GA drawing considering the size of electrical room/pump room door and also inside size of

.......Agnecy has to co-ordinate with civil agency for giving proper dimenssion of electrical

room/pump room to accomodeted panel easily.[Including Necessary numbering / marking on

PANEL done with red colour radium sticker as per site requirement and instructions given by EIC

on site. Font / number size given by EIC on site as per requirement] (See attached details

specification of panel & manufacture also while quoting rate. [Manufacturer must be of Gujarat

state so three stage inspection can be done if required and service support]

242A Supplying and erecting tripple pole & neutral 440V / 500 V Panel mounting Copper Busbars with 2.00 Rn. mtr. 3171.00 RS: Three Thousand One Hundred

four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated Seventy One only

current / cross section area) duly wraped with colour insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus bar supports / insulators, main cable socket

to each bar, erected in existing cubical panel with necessary connections.For electrolyte copper

busbars Suitable for 200 Amp. capacity having cross section area not less than 150 sq. mm

242B Suitable for 300 Amp. capacity 2.00 Rn. mtr. 4861.00 RS: Four Thousand Eight Hundred

Sixty One only

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

242C Suitable for 100 Amp. capacity 2.00 Rn. mtr. 1942.00 RS: One Thousand Nine Hundred

Forty Two only

242D Suitable for 630 Amp. capacity 2.00 Rn.mtr 10455.00 RS: Ten Thousand Four Hundred

Fifty Five only

243A Supplying & erecting approved make Four Pole 415 V change over switch interior for panel 1.00 Each 12120.00 RS: Twelve Thousand One

mounting with operating mechanism A.C.23 duty confirming to IS [a] For 200 Amp FP . Cat III Hundred Twenty only

243B For 125 Amp FP . Cat III 2.00 Each 7713.00 RS: Seven Thousand Seven

Hundred Thirteen only

244 Providing & erecting approved make ATS panel suitable for following size of 3 phase, 415 V., 50 1.00 Each 49402.00 RS: Forty Nine Thousand Four

Hz, A.C. diesel generating set complete of scope as detailed below: Hundred Two only

1) Power module: Motorised Changeover switch with ATS controller, Auxiliary contactor with NO &

NC contacts with Automatic Battery Charger, indicating lamps for Generator ON, Mains ON, Load

and suitable control terminals and power terminals with neutral earthing studs. (D) ATS Panel for

/ 62.5 kVA 3 phase DG Set

245 Providing and erecting Two way Centre off Four pole MCB Change Over Switch (IS 13947-3 / IEC 1.00 Each 928.00 RS: Nine Hundred Twenty Eight

60947-3) in existing box.(a) for 25 Amp only

246 Providing and erecting Approved make Three pole moulded case circuit breaker having breaking 1.00 Each 27477.00 RS: Twenty Seven Thousand Four

capacity/strength ICU of 50 K.A. and above at 415 V. having Normal current rating 400A .with Hundred Seventy Seven only

variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing including

Neutral Link(Cut Out)(Main Panel)

247 Providing and erecting Approved make Three pole moulded case circuit breaker having breaking 1.00 Each 24272.00 RS: Twenty Four Thousand Two

capacity/strength ICU of 50 K.A. and above at 415 V. having Normal current rating 250A.with Hundred Seventy Two only

variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing including

Neutral Link(Cut Out)(Main Panel)

248 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking 1.00 Each 22813.00 RS: Twenty Two Thousand Eight

capacity/strength ICU of 35 K.A. and above at 415 V. having Normal current rating 250A.with Hundred Thirteen only

variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing (Main

249 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking 3.00 Each 17667.00 RS: Seventeen Thousand Six

capacity/strength ICU of 35 K.A. and above at 415 V. having Normal current rating 200A.with Hundred Sixty Seven only

variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing (Main

250 Providing & Erecting Approved make Four pole moulded case circuit breaker having breaking 3.00 Each 6723.00 RS: Six Thousand Seven Hundred

capacity ICU of 25 K.A. at 415 V,having normal current rating up to 25 A to 100 A. with Twenty Three only

Variable/Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal

connections spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100%

of ICU only. (Spare )(Main Panel)

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

251 Providing & Erecting Approved make Four pole moulded case circuit breaker having breaking 3.00 Each 8774.00 RS: Eight Thousand Seven

capacity ICU of 35 K.A. at 415 V. having normal current rating 125A. with Fixed/Variable thermal & Hundred Seventy Four only

magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections spreader

tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only (For Main

Panel,Police Station Panel)

252 Providing and erecting following additional parts for panel mounting MCCBs (A)Extended operating 12.00 Each 952.00 RS: Nine Hundred Fifty Two

rotary handle with pad lock with three position trip,off,on suitable for 25A to 250 A panel mounting only

cat-III(Company must be same company of switchgear)

253 Providing & Erecting Approved make Earth fault Relay suitable to mount with inter connection to 2.00 Each 5427.00 RS: Five Thousand Four Hundred

moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220 Twenty Seven only

V AC with all internal connections & complete erected in existing M.S.housing. For 125 A - 200 A,

CT Ratio 1/200(For Police Station Panel,Main Panel)

254 Supply installation Testing and commissioning of MFM (Multi Function Meter) dual source meter for 2.00 Each 13984.00 RS: Thirteen Thousand Nine

the given panel and as per the rating off the panel including RS -485 port and all necessories Hundred Eighty Four only

accessories with single phasing protection & reverse phase protection module

255 Supplying and erecting approved make set of indicator lamps of LED type lamp, lense cover, 6.00 Each 43.00 RS: Forty Three only

Bakelite holder complete erected with necessary connections.

256 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden 3.00 Each 272.00 RS: Two Hundred Seventy Two

havong 0.5 class accuracy erected in existing CRCA box duly secured with insulating materials only

connected to the meter

257 Providing & erecting Approved make. energy meter 3 phase 4 wire unbalanced load 500 V.50A / 1.00 Each 2586.00 RS: Two Thousand Five Hundred

100A complete erected as directed with necessary earth wire. Cat-ii Eighty Six only

258 Providing & erecting Suitable set of 3 Nos CTS for 100A and above as required for Energy Meter 1.00 Each 2085.00 RS: Two Thousand Eighty Five

including testing charges as required by Electrical Inspector. only

259 Providing & erecting Miniature circuit breaker single pole 6 Amp. to 32 Amp. suitable to operate on 15.00 Each 122.00 RS: One Hundred Twenty Two

240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to only

IS 8828/1996 with ISI Mark. (Main Panel,Police Station Panel,Street light Terminal Box)(Spare)

260A Providing & erecting 240 V MCB Double pole switch for Motor and inductive load (C curve) having 20.00 Each 360.00 RS: Three Hundred Sixty

10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having following capacity. For only

40 Amp DP. (Main Panel,Police Station Panel,3-Phase DB & Spares)

260B For 6-32Amp (For Lift Panel ) 5.00 Each 327.00 RS: Three Hundred Twenty

Seven only

261A Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA 10.00 Each 803.00 RS: Eight Hundred Three

breaking capacity & confirms to IS :8828 in existing box having following capacity [c] 63 Amp. (Main only

Panel,3-Phase DB,Police Station Panel) (Spares)

261B For 40A FP MCB(If required) 4.00 Each 728.00 RS: Seven Hundred Twenty Eight

262 Providing & erecting 240 V MCB Double pole switch for Motor and inductive load (C curve) having 2.00 Each 599.00 RS: Five Hundred Ninty Nine

10 KA breaking capacity & confirms to IS:8828 with same company metal box with earthing terminal only

having following capacity with necessary Numbering with oil Paint by painter. For 40 Amp.(If

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

263 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA 2.00 Each 1172.00 RS: One Thousand One Hundred

breaking capacity & confirms to IS :8828 with same company metal box with earthing terminal Seventy Two only

having following capacity with necessary Numbering with oil Paint by painter. [c] 63 Amp. (If

264A Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly 5.00 Each 299.00 RS: Two Hundred Ninty Nine

powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals for following only

type of RCCB, RCCB + MCB with necessary numbering / marking with oil Paint by painter. [a] For

pole [Box must be of same company as MCB, ELCB used]

264B For 4 pole [Box must be of same company as MCB, ELCB used] 5.00 Each 486.00 RS: Four Hundred Eighty Six

265A Providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having 3.00 Each 2434.00 RS: Two Thousand Four Hundred

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 1 Thirty Four only

phase and neutral 240 V having characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component (mounted in Box) for following Max. rating erected as

directed with same company metal box with earthing terminal.Suitable for operation on Single

phase 240 Volt max. rating of (i) For 40 Amp. DP Cat.-III. (If required)

265B For 25 DP ELCB Amp. (For Lift Panel) 1.00 Each 2145.00 RS: Two Thousand One Hundred

Forty Five only

266 Providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having 2.00 Each 2872.00 RS: Two Thousand Eight Hundred

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 Seventy Two only

phase and neutral 415 V having characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component (mounted in Box) for following Max. rating erected as

directed .Suitable for operation on Three phase 440 Volt max. rating of (iii) For 40A FP (For Lift

Panel)(3-Phase DB)

267 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant 9.00 Each 6253.00 RS: Six Thousand Two Hundred

indian standards ammended upto date. Supplying and fixing following way single phase MCB Fifty Three only

distrubution board of company fabricated with sheet box with powder coated inside and outside

after apply seven tank chemical process of 1.2mm thick CRCA sheet cover ........

.....(Door, Back side & body of MCBDB) complete with suitable integral single piece construction

tinned copper busbar and link with all necessary interconnection and with necessary size MS frame

for mounting MCBDB.Manufacturer must be provided (1) IP 43 and as per IS:8623 1 & 3, IEC

61439 1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned

Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for .........

.........240 Volts on surface / recess complete with loose wire box, terminal connectors for all

incoming and outgoing circuits, with suitable size FRLS PVC insulated copper conductor up to

terminal blocks and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral link,

tinned copper earth bar, din bar, detachable gland plate, interconnections, powder painted including

earthing etc.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

Single phase incoming and horizontal single phase outgoing. For 16 Way MCBDB: Including

Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988 having sensitivity of 30 mA

and breaking capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to IS:8828

having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to .......

.........operate on 240 Volt A.C. power. (6 to 25 Amp 12 Nos.) (The DBs should be used of same

company of MCB / ELCB to be used) (MCBDB must be erected in line & level with spirit level and

finish the external edge with box cutting plaster) (Same colour MCB(SP/DP) should be used as

same as MCBDB) [Including Necessary numbering / marking on box done with red colour radium

sticker as per site requirement and instructions given by EIC on site. Font / number size given by

EIC on site as per requirement] Single phase incoming and horizontal single phase outgoing.

268 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted 1.00 Each 1664.00 RS: One Thousand Six Hundred

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 Sixty Four only

without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for (A) single phase incoming and horizontal single phase outgoing sheet

steel double door (IP-43)

For Single phase incoming.........

........... and horizontal single phase outgoing -(a) Double door-16 Way

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected

in line & level with spirit level and finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering / marking on

box done with red colour radium sticker as per site requirement and instructions given by EIC on

site. Font / number size given by EIC on site as per requirement]

269 Supply, Installation, Testing & Commissioning of Three Phase, 440 V Surge Suppressor protection 2.00 Each 6319.00 RS: Six Thousand Three Hundred

Device (SPD) & 40 Amp. TPN MCB (or as per SPD OEM guideline for the protection of SPD which Ninteen only

is erected such a way that it can be operated easily) SPD Must be Capable to Protect all electrical

and electronic equipments. The Detail Specification are As per Attached sheet with Annexture -A

(Hakel, Iskira,OBO make) (With Three year Gaurantee / Warranty)

270 Supplying and erecting Servo Controlled Voltage Stabilizer (SCVS) as per following requirement: 1.00 Each 103213.00 RS: One lac Three Thousand Two

(1) Input Voltage Range - Three Phase 340 To 480 Volt AC. (2) Out put Volatge - Three Phase 415 Hundred Thirteen only

Volt AC (Line - Line) with Voltage Regulation of +/- 1%. (3) Frequency range - 47 Hz To 63 Hz. (4)

Efficiency - More or equal to 98%. (5) Type of Stabilizer - Suitable for Balance & Unbalance Load

and Voltage including SPD (6) Controlled Type - Digital........

......... Micro Controller Based Disply. (7) Rate Of Correction - Upto 100 Volt / Sec (Line - Line) (8)

Servo Motor Drive - AC Syncronous Stepper Motor - As per KVA Capacityy, Out put volatge and

Voltage regulation requirement. (9) Nil Wave form Distortion and Effect of Load POwer. (10)

Responce Time - 10 milli second. (11) Protection requirements - Input low Cut off protection / Input

High Cut Off Protection / Output Low Cut Off protection / IOutput High........

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

............ (12) Fault Annuciation Panel LED shows Input present, Input high Input low, Output

Normal, Output High, Outpur low, Overload. (13) Output On time delay - 10 seconds (14) Ambient

Tempeature capacity - 0 - 45 RH upto 90 %. (15) Enclosure Type - IP 20 (16) Type of Cooling - Oil

,Output:Bypass switch with changeover switch and Provied SPD & 5 year free replacement

guarantee on Stamp paper.

Loading and unloading of above........

........ item shall be done by hydra and skill work force under supervision of electrical engineer and

guidelines given by manufacturer to avoid damage to the item. Picture of it to be submitted in

running bill / final bill.Size of door and Ele. room / Pump room shall be checked by agency's

engineer before giving order. If found any problem in size discuss with GSPHCL engineer for

rectification before giving order. (50 KVA) (Fuji Electric, Servomax Limited, Krykard, Make)

271 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 25 x 3 mm 4.00 Sq. Mtr. 2289.00 RS: Two Thousand Two Hundred

red oxide painted angle iron frame suitable for fixing ICDP SWITCH and energy meter (contractor Eighty Nine only

shall make approved drawing of Bakelite sheet To arrange required No. of Energy meter & ICDP

switch -busbar etc. as per Actual space available in electrical room at site)

272 Providing and erecting metallic vitrified danger notice board as per language suggested by engineer 6.00 Each 69.00 RS: Sixty Nine only

incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551.

273A Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid 20.00 Mtr. 275.00 RS: Two Hundred Seventy Five

material with ignition free & flame proof confirming BS with necessary end caps Internal and only

external bend, flat bends, coupler, tee etc. All necessary accessories and measuring of following

sizes. [1] 75 mm x 50 mm trunking (MK / Legrand/OBO Make Only)

273B 100 mm x 50 mm trunking (MK / Legrand/OBO Make Only) 20.00 Mtr. 424.00 RS: Four Hundred Twenty Four

274A Supplying and erecting approved make GRP/FRP Perforated type Cable Tray Material – Corrosion 50.00 Rmt 636.00 RS: Six Hundred Thirty Six

Resistant Polyester Flame Retardant U.V. Stabilized Resin System - Manufactured from Pultruded only

Sections- Polyester Resin System, Glass Content : 55 – 60 % - - Standard Length : 3000 mm-

Support Span – 1500 mm, Deflection L/200 - Specification NEMA FG1 1993- UV Resistant - Flame

Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA

FG1 1993 Oxygen Index – Minimum 30% as per .......

.............ASTM D 2863 - Flame Spread (Extent of Burning) – 20 mm as per Standard ASTM D 635 -

Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 –

10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per

Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D

695- Barcol Hardness – 50 – 65. For Width - 300 mm, Pultruded “C” Channel with 50 mm Sides

mm Thickness, Loading 30 Kg./Mtr.

274B For Width - 150 mm, Pultruded “C” Channel with 30mm Sides 3 mm Thickness, Loading 15 50.00 Rmt 493.00 RS: Four Hundred Ninty Three

Kg./Mtr. only

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

275 Providing and fixing approved make Ladder type cable tray. Made from M.S sheet. The cable tray 50.00 Rmt 306.00 RS: Three Hundred Six only

should be bended as per IS 2062/1079 shall be fabricated of double bended channel section

longitudinal members with single bended Channel section. Rungs of members welded to the base

of the longitudinal members at 250 mm c/c spacing . as per IS and shall be coated with hot dip

galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and

washers etc. erected on existing support as per Specification and as per instruction of engineer in

charge..(3) 300 X 50 X 2.0 mm Thick

276 SITC of specified make Cat - 6 voice /data cable to be done in prelaid PVC pipe / raceway , but 3000.00 Mtr. 47.00 RS: Forty Seven only

without the cost of raceway or pipe ( the wire is to be drawn from MFD/ JB to outlet point) (a) CAT -

6-Y Colour ( For Voice Cabling ) & X -Colour(For Computer Data Cable ) .

( Molex/Avaya/Systimax/Legrand make)

277 SITC of 24 x 10/100/1000BASE-T ports 2.00 Each 15247.00 RS: Fifteen Thousand Two

4 x Gigabit RJ45/SFP Combo ports Hundred Forty Seven only

Advanced L2 switching and security features

L2+ Static Routing

Optional “standard mode” or “surveillance mode” management user interface

( Molex/Avaya/Systimax/Legrand make)

278 SITC of Jack Panel, fully loaded with 24 nos. UTP ports for PCB based IO Jacks (RJ45, TIA-568C 2.00 Each 4357.00 RS: Four Thousand Three

Category-6, Installation and Termination of all 24 nos. Catergory-6 UTP , unloaded with individually Hundred Fifty Seven only

replaceable 24 nos. Category-6 I/O Jacks complying with TIA-568.C.2, as per given jack

specification Shall be suitable for loading unshielded & shielded jacks for different category systems

( Molex/Avaya/Systimax/Legrand make)

279 SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag 35.00 Each 199.00 RS: One Hundred Ninty Nine

less(Molex/Avaya/Systimax/Legrand make) only

280 SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag 35.00 Each 155.00 RS: One Hundred Fifty Five

lessMolex/Avaya/Systimax/Legrand make) only

281 Supply and installation of 9U steel rack for installing 4 nos. Ethernate switches/Hubs. The Rack 1.00 Each 11441.00 RS: Eleven Thousand Four

should be fully enclosed steel housing fabricated with 14 SWG sheet and powder coated with glass Hundred Forty One only

doors and having wire management systems. The rate includes the Exhaust Fan, 2 nos. 4 socket

and 1 switch power strip and all the wiring in the rack. (Rittal,Valrack,APC,Legrand make)

282A Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE 100.00 Mtr 124.00 RS: One Hundred Twenty Four

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or only

HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary connections.(a) Conductor Size 0.5 mm

armoured Ten Pairs.[make and model approved by EIC strictly as per tender specification]

282B For Conductor Size 0.5 mm armoured Twenty Pairs.[make and model approved by EIC strictly as 100.00 Mtr 198.00 RS: One Hundred Ninty Eight

per tender specification] only

282C Providing & erecting Tag Box for Telephone Lines suitable for 20 Pairs Krone type complete with 1.00 Each 1355.00 RS: One Thousand Three Hundred

Krone & locking arrangements. Fifty Five only

282D Providing & erecting Tag Box for Telephone Lines suitable for 50 Pairs Krone type complete with 1.00 Each 1730.00 RS: One Thousand Seven

Krone & locking arrangements. Hundred Thirty only

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

283 SITC LED Bollard fittings of minimum height 600 mm & dia.100mm having polycarbonate 8.00 Each 2661.00 RS: Two Thousand Six Hundred

clear/milky diffuser mounted on 3mm thick aluminium finished powder coated pipe with base plate Sixty One only

160x160mm with erection by M8x75mm fastner with required RCC foundation.IP65 for 9-20 watt,

surge- 4 kv-

284A Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should 2.00 Each 8792.00 RS: Eight Thousand Seven

be made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable Hundred Ninty Two only

suspend local wind speed with integral Junction box with Hot Deep Galvanised door having 2 nos.

180° operated hinges & 2 nos. Ln key locking with silicon rubber gasket. Consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail & MCB , Brass stud type terminal

and arrangement for cable termination to be........

.......... erected on RCC foundation as per details given by manufacturer and EIC considering site

requirement.

Foundation Details: 1) Grade of RCC 1:2:4, 2) Grade of steel rainforcement of RCC FE 415, 3)

Clear cover to rainforcement 50mm, 4)Concrete vibrated, 5) use suttering / farma, 6)Hot deep

galvanized average 70Micron, 7) Detail drawing will be given by corporation. For 6 Mtr. Long 70 mm

Top X 135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base .........

........plate, 4-M20 Bolts and 600mm long hot deep galvanized J-Bolt, nuts, washers with 1000mm

under ground and 200mm above ground level and 450mm dia. Foundation in 1:2:4 proportion.(As

Per Details given by Manufacturer & EIC Considering Site Requirement.Approx.Pole Weight 59kg.)

(Make:- Bajaj, Walmart, Ambica, Transril)

284B For 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with 225mmX225mmX16mm 1.00 Each 10843.00 RS: Ten Thousand Eight Hundred

base plate, 4-M20 Bolts and 600mm long hot deep galvanized J-Bolt, nuts, washers with 1000mm Forty Three only

under ground and 200mm above ground level and 450mm dia. Foundation in 1:2:4 proportion.(As

Per Details given by Manufacturer & EIC Considering Site Requirement.Approx.Pole Weight 67kg.)

(Make:- Bajaj, Walmart, Ambica, Transril)

285A Supplying & erecting Sintex or approved make SMC press moulded composite FRP. loop-in, loop- 2.00 Each 890.00 RS: Eight Hundred Ninty only

out approx. 2mm thick box complete with bakelite connector strip 4way & hinged doors having

locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on pole

with cable clamps& earth bolt of following size of box.a) 300mm x 200mm x 100mm [deep] (For TV

285B For 140mm x 140mm x 100mm [deep] 2.00 Each 295.00 RS: Two Hundred Ninty Five

285C For 250mm x 200mm x 100mm [deep] 2.00 Each 510.00 RS: Five Hundred Ten only

286 Supplying and erecting Coil type earthing, coil made from 8 SWG galvanised iron wire with 50 mm 3.00 Each 369.00 RS: Three Hundred Sixty Nine

OD and 50 turns (length of turns approx. 200 mm) and having additional continuous streight length only

of 3.00 mtr at open end and should be connected to earthing bolt and burried in 1.5 mtr deep

specially prepared earth pit complete with salt and charcoal/coke as required for coil type earthing.

(Approx weight of coil 1.0 to 1.1 Kgs)

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

287 Supplying and erecting Fabricating terminal box for street light pole made from 16 SWG M.S. sheet 10.00 Each 702.00 RS: Seven Hundred Two only

having following size complete with fixing arrangement for terminal board, with necessary hole for

wire entry and exit from the box. The box shall be provided with cover and hinges on one side and

bolting at other end The box shall be fixed by clamps fabricated from 25mm x 6mm flat.The box

shall be painted with one coat of red oxide and two coats of paint having following box size 330 mm

x 260 mm x 140 mm (depth). And Providing and fixing Terminal board of size 5.0 x 127 x

mm. bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit with suitable brass studs with

nuts, washers and clamps of size 25 mm x 3 mm suitable for pole painted with one coat of red lead

288 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter 8.00 Each 487.00 RS: Four Hundred Eighty Seven

complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and length suitable for only

76.5 / 80 mm. required size of pole top or pipe in pipe surface for terrace as per instruction of EIC or

wall bracket as per instruction of EIC having nuts and bolts for fixing the brackets and having

spread of Upto 0.70 mtr. length with suitable degree angle as per .........

.........site situation suggested by EIC.Vertical plane and suitable welded stiffner reducer and nipple

with check nut complete painted with one coat of red oxide and two coats of alluminium paint( Zinc

coating before alluminium paint in mandatory)with with 150X150X2mm thick G.I plate with 4 nos

heavy duty galvanized anker fastner of required size or Single arm bracket (pipe in pipe type

)suitable for terrace as per design given by EIC For single arm bracket. (Fabricators: Bajaj,

Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted)(For wll bracket)

289 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter 2.00 Each 487.00 RS: Four Hundred Eighty Seven

complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and length suitable for only

76.5 / 80 mm. required size of pole top or pipe in pipe surface for terrace as per instruction of EIC or

wall bracket as per instruction of EIC having nuts and bolts for fixing the brackets ......

.............and having spread of Upto 0.7mtr. length with suitable rise as per site condition and suitable

welded stiffner reducer and nipple with check nut complete painted with one coat of yellow zinc and

two coats of alluminium paint for Single arm bracket suitable for pole or terrace as per design given

by EIC (a) For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted)

290 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light Luminaire with total 5.00 Each 4406.00 RS: Four Thousand Four Hundred

consumption of 48 - 59 Watts with single piece die cast aluminium housing, High power White Six only

LEDs wattage of 5 Watt & Above shall be mounted on high quality metal core PCB with extremely

precison designed heat sink complete with IP66 protection Class with polycarbonate / thoughened

glass cover / cluster Lens the fixture should be suitable for pole/bracket mounting. The fixture to

comply both LM79 and LM 80 guidelines with LED........

........... module L70 at 50,000 hrs, provided with high quality polycarbonate lenses /cluster Lens for

better light distribution. The Fixture Should be able to be Pole Mounted and also bracket mounted,

provided with high quality driver for protection against high and low Voltage cut Off, opertional for

high amibient and high humid envirnoments, THD of driver should be less than 10% and P.F >

0.95. Also the Fixture should meet the following technical criterias ...........

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

.......Oprating range Voltage 160 to 270 V, system efficiency >= 150 lm/w, and total lumens not less

then 7500 CCT > 5000K, CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV

integral and 10 KV non integral The Separate Potted driver should have over current, over voltage

protection, short circuit protection so that the fixture recovers once the fault is .......

.........removed. In addition to the above product should be operational in the temperature range of

deg to 50 deg and humidity range of 10% to 90% RH. (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 5 yrs free replcement Guarantee for complete

291 SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of 60 - 9.00 Each 5229.00 RS: Five Thousand Two Hundred

89 watts with single piece die cast aluminium housing, High power White LEDs wattage of 5 Watt & Twenty Nine only

Above LED's mounted on high quality metal core based PCB with extremely precison designed

heat sink, complete with IP66 protection Class, with polycarbonate / Toughened glass cover/cluster

Lens. The fixture should be suitable for pole/bracket mounting. ........

.......The fixture to comply both LM79 and LM 80 guidelines with L70 at 50,000 hrs, provided with

high quality polycarbonate Seperate lenses for better light distribution. Capacity of Each LED Must

Be>4Watt in Street Light Fitting. The Fixture Should be able to be Pole Mounted and also bracket

mounted, provided with high quality potted driver for protection against, high and low Voltage cut

Off, opertional for high amibient and high humid envirnoments, .........

............THD of driver should be less than 10% and P.F > 0.95. Also the Fixture should meet the

following technical criterias. Operating range Voltage 160 to 270V, system efficiency >=

lm/w,total lumens not less then 10500, CCT > 5000K, CRI >65, beam angle 120 deg, 4kV integral &

non integral surge immunity level at least 10 KV non integral. The Separate Potted driver should

have over current, over voltage protection, short circuit protection so ..........

...........that the fixture recovers once the fault is removed. In addition to the above product should

be operational in the temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH.

(Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit 5 yrs free

replcement Guarantee for complete Fixture)

292 SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total consumption of Max. 8.00 Each 7315.00 RS: Six Thousand Three Hundred

120 W with single piece die cast aluminium housing, high power LED shall be mounted on high Sixteen only

quality metal core PCB with extremely precison designed heat sink, complete with IP66 protection

Class, with polycarbonate / toughened glass cover. The fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79......

............ and LM 80 guidelines with LED minimum 130 lumen/watt with toughen glass, L70 at

hrs, provided with high quality polycarbonate lenses for better light distribution. The Fixture Should

be able to be Pole Mounted and also bracket mounted, provided with high quality driver for

protection against high and low Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F. greater than ........

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

...........0.95. Also the Fixture should meet the following technical criterias. Voltage 160 to 270 V,

system efficiency greater thanequal to 120 lm/w and total lumens not less than 14400, operating

current less thanequal to700MA, CCT greater than 5000K, CRI greater than65, beam angle

deg, surge immunity level 4 kv integral & 10 kv non integral The Separate Potted driver should

have over current, over voltage protection, short circuit protection so that.........

............ the fixture recovers once the fault is removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH.

(Stricly sample approved by EIC subject to tender specification) (Note: The

manufacturer/authorized Channel partner of the manufacturer has to submit 5 yrs free replcement

Guarantee for complete Fixture)(Cool White Color/warm white/natural white ( model approved by

engineer incharge subject to above specification )

293 SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total consumption of Max. 3.00 Each 5229.00 RS: Five Thousand Three Hundred

90 W with single piece die cast aluminium housing, high power LED shall be mounted on high Twenty Four only

quality metal core PCB with extremely precison designed heat sink, complete with IP66 protection

Class, with polycarbonate / toughened glass cover. The fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM 80 guidelines with LED minimum

lumen/watt with toughen glass, L70 at ......

..........50,000 hrs, provided with high quality polycarbonate lenses for better light distribution. The

Fixture Should be able to be Pole Mounted and also bracket mounted, provided with high quality

driver for protection against high and low Voltage cut Off, opertional for high amibient and high

humid envirnoments, THD of driver should be less than 10% and P.F. greater than 0.95. Also the

Fixture should meet the following technical criterias. Voltage..........

......... 160 to 270 V, system efficiency greater thanequal to 120 lm/w and total lumens not less than

14400, operating current less thanequal to700MA, CCT greater than 5000K, CRI greater than65,

beam angle 120 deg, surge immunity level 4 kv integral & 10 kv non integral The Separate Potted

driver should have over current, over voltage protection, short circuit protection so that the fixture

recovers once the fault is removed. In addition to the above product ........

...........should be operational in the temperature range of 0 deg to 50 deg and humidity range of

10% to 90% RH. (Stricly sample approved by EIC subject to tender specification) (Note: The

manufacturer/authorized Channel partner of the manufacturer has to submit 5 yrs free replcement

Guarantee for complete Fixture)(Cool White Color/warm white/natural white ( model approved by

engineer incharge subject to above specification )

294 Providing & Erecting Univesal Astro interlligent Street light Control System insu with weather proof 1.00 Each 12895.00 RS: Twelve Thousand Eight

box for indoor allplication 5KVA ( as Per atteched Specification) Hundred Ninty Five only

295 Providing , erecting , testing and commissioning Insu Intelligent Streetlight Controller specially 1.00 Each 24984.00 RS: Twenty Four Thousand Nine

design for energy saving in conventional streetlight system ( Cat. No. SLC 03 1Ph 15KVA Hundred Eighty Four only

20Amp/Cat NoSLC 03 1 ph 15 KVA 20 amp per phase) having technial specification ,1 phase

wire, 230 V AC/ph +/ 25% R Y B N 2 Wire supply System.50 Hz (+ / 10 %), 2 W (Stand By) to

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

..........(at street light operation) consuption , Advance 8 bit micro controller, switching on longitude

and latitude base, accaracy of + 1 minute per month. with inbuilt battery, with battery life of more

than 8 years, with speicial device which hold the parameter for more then 10 years without any

power and password protected. 16 character and two line LCD display with backlight, 4 keys user

friendly keyboard system, 7500 VA feeder pillar capacity, 63/100 amps isolator ,3 ......

.............Outpus with termination 40/63 Amps 2/3 pole contactor , 3X16 Amps with F R cable

provision to by pass by way of relay operation through auto/manual switch, 2 to 55 centigrade and

humidity 90 % non condensing Outdoor type installation on pole with clamps.(Provided with clamps

and nut bolt) or wall or floor, three locking system flush type internal panel lock, external pad lock

and internal U clamp locking systems for against theft of panel. having 17/25 Kg weight ,16/18

guage MS weather proof with industrial exterior powder coated with 7 tank process RAL

296A Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium conductor cable for 99.00 Mtr 642.00 RS: Six Hundred Forty Two

1100 volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage only

1.0mm thick cable clamp or in existing DWC pipe underground or road crossing or floor.(a) For

3*1/2 core120 Sq. mm (70 Sq. mm * 1/2 core)(Cut off Switch to Sump room Main Panel )

296B Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium conductor cable for 150.00 Mtr. 338.00 RS: Three Hundred Thirty Eight

1100 volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage only

1.0mm thick cable clamp or in existing DWC pipe underground or road crossing or floor.(a) For

3*1/2 core 50 Sq. mm (25 Sq. mm * 1/2 core)(Main Panel to Police Station Panel)

296C For 3*1/2 core 70 Sq. mm (35 Sq. mm * 1/2 core) [From Ele. Meter Cut out to Voltage Stabilizer 120.00 Mtr. 450.00 RS: Four Hundred Fifty only

and Voltage Stabilzer to Main Panel]

296D For 4 core x 25 Sq. mm (Main Panel to Lift Panel & Lift Panel to Machine Room)(Main Panel to 120.00 Mtr. 227.00 RS: Two Hundred Twenty Seven

Pump Panel) only

297 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for 1100 volt to be 451.00 Mtr. 451.00 RS: Four Hundred Fifty One

laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage 1.6mm thick cable only

clamp or in existing DWC pipe underground or road crossing or floor. (a) For 4 core x 4 sq.mm.

298A Providing & erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed 50.00 Mtr. 70.00 RS: Seventy only

copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper lugs, nuts and bolts if required. For One wire

6.00 Sq.mm (Conductor resistance should be as per IS:8130/1984 )

298B [f] One wire 10.00 sq. mm (Conductor resistance should be as per IS:8130/1984 ) 50.00 Mtr 114.00 RS: One Hundred Fourteen

298C For One wire 16.00 Sq.mm (Conductor resistance should be as per IS:8130/1984 ) 350.00 Mtr. 176.00 RS: One Hundred Seventy Six

298D For One Wire 25.00 Sq.mm(Conductor resistance should be as per IS:8130/1984 ) 50.00 Mtr. 293.00 RS: Two Hundred Ninty Three

298E For One Wire 35.00 Sq.mm(Conductor resistance should be as per IS:8130/1984 ) 50.00 Mtr. 373.00 RS: Three Hundred Seventy

Three only

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

298F For One wire 70.00 Sq.mm (Conductor resistance should be as per IS:8130/1984 )) 100.00 Mtr. 829.00 RS: Eight Hundred Twenty Nine

299A Providing & fixing Solderless crimping type Aluminium lugs conforming to IS suitable for cable of 16.00 Each 15.00 RS: Fifteen only

following size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. [a] For 25 Sq.mm.

299B For 35/50 Sq.mm 28.00 Each 20.00 RS: Twenty only

299C For 70 Sq mm 26.00 Each 25.00 RS: Twenty Five only

299D For 120Sq mm 20.00 Each 45.00 RS: Forty Five only

300A Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable of 300.00 Each 8.00 RS: Eight only

following size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to 6 Sq.mm

300B Providing & fixing double compressed heavy duty flange type brass cable gland with rubber ring for 30.00 Each 43.00 RS: Forty Three only

P V C insulated armoured cable complete with outgoing tails, insulating tape etc. For following size

cables. (a)For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI, Comet Make Only)

300C For 3*1/2 core x 25.0 Sq. mm (Sigma, MCI, Comet Make Only) 4.00 Each 66.00 RS: Sixty Six only

300D For 2 to 4 core x 70.0 Sq. mm (Sigma, MCI, Comet Make Only) 12.00 Each 102.00 RS: One Hundred Two only

300E For 2 to 4 core x 50.0 Sq. mm (Sigma, MCI, Comet Make Only) 12.00 Each 75.00 RS: Seventy Five only

300F For 2 to 4 core x120Sq. mm (Sigma, MCI, Comet Make Only) 10.00 Each 139.00 RS: One Hundred Thirty Nine

301 Supplying following size of Light duty “A” Class G.I. Pipe & erecting as directed by Engineer-in- 20.00 Mtr. 171.00 RS: One Hundred Seventy One

charge. For 25 mm dia. only

302A Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper 80.00 Mtr 58.00 RS: Fifty Eight only

wires of following size to be erected as directed. 3 core 1.5 sq.mm. PVC insulated round copper

wire ISI mark.

302B For 3 core 2.5 sq.mm. PVC insulated round copper wire ISI mark. 149.00 Mtr. 96.00 RS: Ninty Six only

303 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cms. below ground across the road 10.00 Mtr. 261.00 RS: Two Hundred Sixty One

crossing or on floor with necessary material in an approved manner and making the ground as per only

original.(C) For 150mm Dia

304A Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 (part 24) 400.00 Mtr. 117.00 RS: One Hundred Seventeen

2018)) with minimum load required of 450N capacity with anti rodent and ultra violet material only

properties with necessary connecting accessories of same material at required depth to be laid

cms. under ground for laying of cable below ground / road surface for enclosing cable and back

filling the same to make ground as per original. (A)For Outer dia.50mm and Inner dia. 38mm (Test

Certificate to be Submitted)

304B For Outer dia.90mm and Inner dia. 75mm(Test Certificate to be Submitted) 88.00 Mtr. 150.00 RS: One Hundred Fifty only

304C For Outer dia.120mm and Inner dia. 103.50mm (Test Certificate to be Submitted) 90.00 Mtr. 191.00 RS: One Hundred Ninty One

305 Providing & erecting open well horizontal mono block pump set with cast iron body, complete for 2.00 Each 17108.00 RS: Seventeen Thousand One

three phase submersible motor having [C] For 3 HP 3 phase open well horizontal mono block pump Hundred Eight only

set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia delivery pipe

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

306 Supplying and erecting approved make 3 HP DOL type motor control cubical panel made from 16 1.00 Each 47062.00 RS: Forty Seven Thousand Sixty

G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors and locking Two only

arrangement Floor Mounting On 300 mm Height with MS Stand Angle & CC Foundation. Size

mm (H) x 35 mm (W) x 05 mm (D). The detail specification & quantity of.......

........ material used are as under.

Panel must be with minilec relay for auotmatic change over for pump 1 & 2 logically without using

manually change over switch (Minimum Panel Size: 1.10 meter (H) x 1.10 meter (W) x 0.25 meter

INCOMMER SECTION: (1) MCCB-30 KA-FP (Ics = 100% Icu), Rating: 63 Amp., Make: L&T, Qty:

01 No. (2) Digital Ammeter (SR-65), Rating: 0-60 Amp., Make: Meco, Qty: 01 No. (3) Ammeter

Rating: ......

Salzer, Qty: 01 No. (6) C.T.- Current Transformer, Rating: 60/5 Amp., Make: Virat, Qty: 03 Nos. (7)

Indicating Lamps (R,Y,B), Rating: 22.5 mm LED, Make: Airon, Qty:03 Nos. (8) SP MCB , Rating:

Amp., Make: L&T , Qty: 03 Nos. (9) Control Wiring, Rating: 1.0 Sq.mm, Make: Any ISI, Qty: Lot (10)

Copper Busbar, Rating: 63A/100 Amp., Qty: Lot (11) Numeric logical relay, Qty: 1 No.

Outgoing Feeder (3 HP DOL Feeder): Qty: 02 Nos. (1) MCB-FP-10 KA, Rating: 20 Amp., Make:

L&T, Qty: 02 Nos. (2) Power Contactor (415 V) Main, Rating: 12 Amp., Make: L&T, Qty: 02 Nos. (3)

Over Load Relay, Rating: 6-10 Amp., Make: L&T, Qty: 02 Nos. (4) Digital Ameter (SR-65), Rating: 0-

20 Amp., Make: Meco, Qty: 02 Nos., (5) Digital Voltmeter (SR-65), .....

.........Rating: 0-500 V, Make: Meco, Qty: 02 Nos. (6) Indicating Lamps (Start,Run,Trip), Rating:

mm LED, Make: Airon, Qty: 04 Nos. (7) Push Button (Start,Stop), Rating: 22.5 mm, Make: Airon,

Qty: 02 Nos. (8) SPP, Rating: 415 V, Make: Space, Qty: 02 Nos. (9) Terminal, Rating: As per Amp.,

Make: Airon, Qty: 04 Nos. (10) Control Wiring, Rating: 1.0 Sq.mm., Make: Any ISI, Qty: Lot (11)

Power Wiring, Rating: As Per Amp., Make: Any ISI, Qty: Lot

Outgoing Feeder (6 Amp. - 01 No.) For Capacitor (1) MCB-FP-10 KA, Rating: 6 Amp., Make: L&T,

Qty: 01 No. (2) Capacitor- MPP Type, Rating: 2 KVAr, Make: Concap, Qty: 01 No., (3) Power wiring,

Rating: As Per Amp., Make: Any ISI, Qty:Lot

Outgoing Feeder (32 Amp. - 01 No.) For Lighting (1) MCB-FP-10 KA, Rating: 32 Amp., Make: L&T,

Qty: 01 No. (2) Power wiring, Rating: As Per Amp. (3) Earthing Strip: 25 x 3; G.I. Strip, Qty: 01 No.

(4) MCB-DP-10KA , Rating: 20A, Make: L&T, Qty.:01 Nos.

307 Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -ISI marked suitable for 3.00 Each 1010.00 RS: One Thousand Ten only

following size (A) 50 mm dia.

308 Supplying Water tight M.S.Box of size 20 x 15 x 15 cms. to erect suitable kitkat fuse / MCB to be . 1.00 Each 232.00 RS: Two Hundred Thirty Two

erected on polished wooden board inside the box with hinged/sliding door with rubber rings and only

erected on pole with suitable pole clamp, all duly painted with one coat of red oxide and two coats of

paints. (Cost of Fuse / MCB shall be taken extra) [Provision for motors cable joints near sump]

309 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper 20.00 Mtr. 103.00 RS: One Hundred Three only

cable approved make of following Size. [d] 3 Core x 2.5 Sq. mm

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

310 Providing water proof straight joint in PVC insulated flat flexible copper cable by using insulated 2.00 Each 188.00 RS: One Hundred Eighty Eight

material water proofing material and making the joint complete. UP to 10 Sq.mm only

311 Supplying, Erecting, Testing & Commissioning the 10 passengers, Basement or Ground plus 1.00 Each 1059757.00 RS: Ten lac Fifty Nine Thousand

2 upper floors with Rated Speed of 1.0 m/sec with micro processor/PLC control and Seven Hundred Fifty Seven only

ACVVVF drive Lift having following main features:

[1] GEAR LESS LIFT DRIVE comprising of High Starting torque Lift duty 3 phase 440 V A. C.

Permanent magnetic synchronous motor of proper rating with high efficiency shall be used.

[2] Micro processor based / PLC, ACVVF, vector control drive with encoder feedback closed loop

hall call demand response, UP/DOWN hall stops, Main, Up/Down Contactor with overload and

phase reversal relay and safety controls.

[3] Car with M.S. platform with bracings of adequate size and to sustain the impact load cabin +

passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade S.S.

304 (minimum 1.2 mm thickness) duty. Car ceiling will be S.S. finishes with aesthetic appearance

with LED ceiling lights (designed as per Engineer-in-charge). Car flooring shall be of .......

.......S.S. 304 chequer plate (minimum 3 mm thickness) design suggested of engineer-in-charge.

Car doors shall be of stainless steel grade 304 (minimum 1.2 mm thickness), hairline finish with

centre opening doors. Car panel will also be S.S. 304 (minimum 1.2 mm thickness) finished with

emergency stop device, mechanical door safety device, facility of auto/attended mode. All car panel

buttons (vandal proof) and all floor switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hours (certificate must be submitted) shall be fully

automatic centre opening (with overlapping arrangement) made of hairline finish steel grade of SS

304 (minimum 1.2 mm thickness) with key holes and infrared curtains with Unlocking facility from

[5] Appropriate battery .........

..........operated emergency light in the car along with alarm switch shall be provided. Also,

Emergency Light & Fan should start immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be

provided inside the car and at all floors.

[7] Full height infra red curtain ........

..............with multiple cross / crossing light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity with

Manual Rescue Operation (Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over loading shall be provided such that doors kept

open till excess load is removed.

[10] Spring buffers/PU Buffers/Hydraulic buffers shall be provided as per passenger capacity and lift

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.

[12] Voice annunciater with suitable music shall be provided in lift car.

[13] Self diagnostics system for......

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

.......... operational and safety parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor calibration as per actual site parameters and

submission of calibration certificate submission, door key holes in the floor doors, fireman switch

shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should

be provided by the lift ........

.........agency, along with the other steel structure works, lifting hook of appropriate size and capacity

in slab casting of machine room

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if

directed by engineer in charge.

[17] Permanent wiring with necessary safety devices like 4P For Machine & 2P For Car cabin

Lighting RCCB in all circuit, for lift machine room and lift well with proper numbers of light points,

with fixtures, exhaust fan and plug points shall be provided by the agency (As Per Tender Item

separate payment done for it ) and 3 phase Power Supply shall be made available by in lift machine

.......room (As Per Tender Item separate payment done for it).

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to

erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around all

landing door openings are not in lift agency’s scope.)

[19] Agency has to provide all ......

...........working drawings and documents and liaison services for obtaining all necessary permission

from lift inspector and other authorities.

[20] acrylic transparent licence/display A4 size holder in lift car

[20A] As Per Statutory Requirement Of Govt Of Gujarat Lift & Escalator Act 2000, Lift Agency Has

To Provide.

1.Car Top Safety Barried

2.Push & Talk Communication system

3.Fireman's Switch........

..........Operation At Ground Floor

4.Carrying out third party lift inspection during/after lift erection and provide report by third party

authorized by concern licensing authority

[21] Car Panel Operating Buttons (Vandal proof) at an accessible height from wheelchair for

handicapped person and raised numbers with brail mark with floor position indicator/buttons.......

............ must be of Auto Glow type clearly visible when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of SS

304 should be provided at appropriate 900 mm height on the Rear & Side Wall Panels in Lift Car.

[23] Voltage Servo Stabilizer Rate Is Included In Lift Item So no Separete Pyment Will Be Given To

Agency.Its Warrenty Will Be Applicable Up To Defect Liability.With Necessary KVA rating voltage

controlled Stabilizer (as per starting current and running current capacity of lift machine and with

bypass switch operation) suitable for Lift machine controller, drive and all equipmentsof lift. Voltage

stabilizer must be installed at Machine Room.

[24] Necessary rating of DP ELCB(car Cabin) and FP ELCB(For Lift Machine) required for lift is in

scope of work which rating is sugested by CEICED Department (Electrical Inspector)

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

[25] Factory inspection for verification of quality, workmanship and as per drawing & testing before

dispatch the material as per tender condition.

[26] Inverter/UPS/Battery for ARD Unit to be covered with lock and Key Powder Coated Box and fix

it to be suitable height on Wall.

[27] Lift Panels shall be ........

..........supplied with Seven Tank chemical process which shall be carried out before applying

painting, painted with powder coating & IP 55 protection and all lift Cables must be erected in

SWG Raceway made from Galvanised.

[28] Advanced Control system dual 32 bit embedded microprocessor with CANBUS serial

communication mode operation on site programming facility, anti nuisance, pre-opening, BMS/RMS

system ........

..........supporting hardware & Software. False call Canceling/Anti Nuisance facility Shall Be

[29] If there will be any accident occurs during installation and maintenance work of Lift work ,lift

OEM and civil agency is responsible for that.they have to make necessary Safety arrangement to

avoid accident Before/During/after Execution on site. GSPHCL and police department will not be

responsible for that.

312 Executing comprehensive (All-in-All) service & manitenance (Including replacement of battery For 1.00 Job 116573.00 RS: One lac Sixteen Thousand Five

ARD) with spare parts as per terms & condition of tender lift manufacturer for defect liability Hundred Seventy Three only

period.For that main agency has to give All-in-All comprehensive maintenance contract to lift

manufacturer and copy of this contract will be submitted before final bill. Agency has to.........

........... quote rate accordingly. Agency has to also provide the fitness certificate from lift

manufacturer and submit to G.S.P.H.C.L. Agency has to submit FDR of approved bank as per

clause 2.0, section 3, of Rs. 119618.00+GST or quoted amount whichever is higher to G.S.P.H.C.L.

for minimum maturity period of Four years in favour of GSPHC, Which will be released after

successful completion of AMC & at the End of defect liability period. lift OEM has to ........

............mantain written record of service & maintenance during defect liability daily period duly sigh

by police dept. and submited regularly to GSPHCL. Lift agency has to do maintenance as per

terms & condition alternate in tender. Also Lift OEM agency should have proper dress code or

identity card during any work ralated to lift due to safety reasons and authentication ........

............to get sign of Police Man. For delay in rectifing the fault, penalty will be deduced from

agency S.D.Whenever agency applied to final S.D. to be released to department.All Lift licenses

are within Validity period of use.In case it is expired then agency has to renew lift licence.No

drawings,documents & liasoning work.

313 Providing & erecting necessary modular Cat. II type Light Points, Fan points,power plug point, and 1.00 job 13631.00 RS: Thirteen Thousand Six

Loop points wiring open / concealed type as per site requirement with all accessories included in lift Hundred Thirty One only

well and machine room. Also work includes ceiling fan, exhaust fan, Tubelight fittings in machine

room and bulkhead fitting in Lift well.

(Agency has to do work as per Necessary drawings given by Lift OEM and approved by GSPHCL)

(Ligh point, Fan point, Loop point, Ceiling fan, Tubelight, Bulkhead fitting etc. specifications are as

per given in schedule)

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

314 Providing, erecting, fabricating the M.S. structure as per requirement of site as per structure design 500.00 kg 77.00 RS: Seventy Seven only

Including proper size approved by EIC of M.S. angles, flats, bars, square pipe, channels, sections

(Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding and finishing duly painted with

Asian/Nerolac make premium quality oil paint and true care red oxide metal primer,asian paint

make with erection on site as per direction of engineer in charge with necessary grouting

cementing, plastering and finishing complete. All hole opening of square pipe end must be closed

with M.S plate welding. Payment will be done on KG as per Actual weight.

315 Supplying & erecting bank of all polypropylene condenser (APP type) with standard capacity of 20.00 KVAR 690.00 RS: Six Hundred Ninty only

2,3,5,7, 10,12.5 & 15 KVAR units of P.F. correction for operation on 3 phase 50 c/s, 400 /440V (+ / -

10%) with externally discharging resistance, earthing terminal & built on angle iron of channel iron

frame work and provided with terminal cover box. Complete erected on provided iron bracket or on

floor duly tested by license.

316 Supply, Installation, Testing and Commissioning (SITC) of 50 KVA Silent Type Diesel Generating 1.00 Each 776739.00 RS: Seven lac Seventy Six

(DG) Set(s) of prime power rating (kVA) as specified, complete as a packaged system, conforming Thousand Seven Hundred Thirty Nine

to CPCB IV+ (or better) emission norms, and complying with all applicable statutory requirements, only

codes and standards including (but not limited to) IS 4722:1968, IS 13364 (Part 2) and BS

(latest editions/amendments). The DG set shall be suitable for 415........

.......... V ±10%, 50 Hz ±5%, 3-phase, 4-wire operation at 0.8 lagging power factor, 1500 RPM, for

tropical conditions, and shall be capable of delivering 10% overload for one (1) hour after twelve

(12) hours of continuous operation (ISO 8528), unless otherwise stated by the OEM. The scope

shall include complete accessories, interconnections, anti-vibration arrangements, exhaust system,

acoustic enclosure, consumables for first commissioning, and all works necessary to render the

installation fully functional and compliant, as directed by the Engineer-in-Charge (EIC).

(A) Diesel Engine:

Turbocharged, 4-stroke, water-cooled, multi-cylinder diesel engine, suitably rated for the specified

DG set prime rating at site conditions, complete with dynamically balanced flywheel, heavy-duty

engine mounting, and electric starting arrangement. The engine governing shall be electronic

(isochronous/droop as per OEM standard) and shall comply with ISO 8528/BS 5514 requirements

for steady-state speed regulation. Engine shall be complete with dry ........

............type air cleaner with restriction indicator, lube oil cooler (if required), radiator/cooling

package (as applicable), and all sensors/switches required for protections and annunciation. The

engine shall be capable of 10% overload for one (1) hour after twelve (12) hours continuous

operation and shall be suitable for continuous duty under tropical ambient conditions. The offered

engine model shall be CPCB IV+ compliant and shall be supplied with complete emission

control/after-treatment system (including DEF/urea dosing.......

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

............. where applicable) along with all accessories, tanks, pumps, heaters and controls required

for compliant operation. The supply shall include first fill of lubricating oil, coolant and consumables

required for initial commissioning and testing. All fasteners, couplings, guards, hoses and

standard/recommended accessories required for safe and reliable operation shall be included and

shall be subject to inspection/approval by the EIC.

(B) Engine-Mounted Instrumentation/Control Panel:

Engine-mounted instrument/control panel shall be microprocessor based, with LCD/LED display,

event log and alarm/trip annunciation, complete with all wiring, harnesses and terminations.

Indications/protections shall include (minimum) the following and any additional protections

recommended by the OEM: (i) Start/Stop key switch and/or push buttons with emergency stop; (ii)

Output breaker: suitably rated 4-pole ACB/MCCB/MCB as applicable, with minimum .........

............50 kA rupturing capacity (or as per fault level at site, whichever is higher), with shunt trip

where required; (iii) Jacket water/coolant temperature – indication and high temperature alarm/trip;

(iv) Lube oil pressure – indication and low pressure alarm/trip; (v) Lube oil temperature (where

provided) – indication/alarm; (vi) Battery charging indication, battery voltage indication and charging

failure alarm; (vii) Engine speed (RPM) indication and overspeed trip; (viii) Engine running hours

meter (non-resettable); (ix) Fuel level indication ........

.............and low fuel alarm; (x) Fail-to-start / crank fail alarm; (xi) Under/over frequency and

under/over voltage protection (alternator side) as applicable; (xii) Common alarm and common trip

indication with potential-free contacts for BMS/remote annunciation. All meters/indications shall be

of proven industrial quality and the panel shall be wired, ferruled and labelled. The contractor shall

submit wiring diagrams, protection settings and datasheets for approval prior to

dispatch/installation.

(C) Alternator:

Synchronous, brushless alternator of appropriate kVA rating, 415 V, 3-phase, 50 Hz, 1500 RPM,

0.8 lagging PF, continuous duty, dynamically balanced rotor, self-cooled, self-excited and AVR

regulated. Enclosure shall be SPDP, minimum IP23. Insulation shall be Class H with suitable

tropicalization; temperature rise shall be within limits of the applicable standard. The alternator shall

comply with IS 13364 (Part 2), IS 4722 and/or BS 2613 (latest), .......

.............as applicable. Voltage regulation with AVR shall be within ±1.0% (steady state) or OEM

standard whichever is better. The alternator shall be capable of 10% overload for one (1) hour after

twelve (12) hours of continuous operation. Harmonic distortion shall be suitable for non-linear loads;

alternator shall be equipped with appropriate AVR features (e.g., soft start, ......

..............UFRO) and shall be suitable for motor starting duties typical to the installation. Terminals

shall be brought out to a terminal box with adequate space for termination and shall include earthing

terminals. All routine/type test certificates (as applicable) shall be submitted for acceptance.

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

(D) Base Frame & Foundation: Engine and alternator shall be mounted on a suitably designed,

fabricated MS channel base frame with stiffeners, lifting arrangement and coupling guard, duly

painted/treated for corrosion protection. The set shall be installed on an adequately designed

cement concrete foundation/pedestal with anchor bolts, pockets, grouting and anti-vibration mounts

(AVMs) / spring isolators as per OEM recommendations and site conditions. Vibration levels shall

be within OEM permissible limits. The contractor .........

..........shall be responsible for alignment, levelling, tightening torque and re-check after load trial,

complete in all respects.

(E) Fuel Tank: In-built/base fuel tank fabricated from minimum 3 mm thick MS sheet, duly leak-

tested, complete with filling arrangement, vent, drain, cleaning opening, level indication and isolation

valve(s). The capacity shall be adequate for minimum eight (8) hours continuous operation at .........

.............full load. Fuel piping between tank and engine shall be MS ‘C’ class pipes of suitable

diameter with compatible flexible connections (where required), complete with all valves, clamps,

supports, unions and fittings. Any additional safety provisions required by local fire

authority/UGVCL/competent authority (such as double wall/bunding, flame arrestor, etc.) shall be

provided within the quoted scope.

(F) Exhaust System: Heavy-duty residential type exhaust silencer suitable for CPCB IV+ installation

(with DEF/after-.........

........treatment system wherever applicable) along with exhaust piping of required length, bends,

supports and flexible bellow, complete with rain cap, drain arrangement and all accessories.

Exhaust piping shall be thermally insulated/lagged and cladded where required to ensure personnel

safety and to limit heat radiation inside the DG room/enclosure. The complete exhaust arrangement

shall be designed such that engine exhaust back pressure remains within OEM permissible limits

and shall comply with applicable statutory and safety requirements.

(G) Starting System:

12 V / 24 V DC electric starting system (as per OEM design) comprising starter motor(s), battery

charger/alternator charging arrangement, relays, cabling and terminals, complete with maintenance-

free batteries of suitable Ah capacity to ensure minimum three (3) consecutive cranking attempts.

System shall include battery isolator and indication of charging healthy/failure. All battery

interconnections shall be with crimped lugs, insulated sleeves and......

.......... proper supports, complete in all respects.

(H) Acoustic and Weatherproof Enclosure: Acoustic enclosure shall be factory-fabricated,

weatherproof and corrosion protected, suitable for outdoor installation, with minimum IP65

protection (or better) for the enclosure body. Enclosure design shall provide adequate fresh air

intake and hot air discharge for engine radiator and alternator cooling such that the internal

temperature rise remains within OEM limits at full load. Provision shall be made.........

........... for safe access/maintenance including lockable doors, viewing window (where provided),

emergency stop access, and cable entry glands. Noise level of the complete DG set with enclosure

shall not exceed 75 dB(A) measured at 1.0 m distance in free field conditions, in accordance with

applicable CPCB requirements. The enclosure shall comply with CPCB IV+ (or better) .......

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

.........requirements and other applicable local rules/regulations. All louvers, acoustic infill/insulation,

fasteners and sealing arrangements shall be of fire-retardant/industrial grade as per OEM standard.

Any deviation from the specified noise/IP requirements shall be treated as non-compliance unless

explicitly approved by the EIC in writing.

The DG set shall be provided with a durable QR code/label fixed on the enclosure/control panel,

linking to a document repository containing (as a minimum) approved GA drawings, wiring

diagrams, foundation and installation details, OEM catalogues, operating & maintenance manuals,

factory test reports, type test certificates (where applicable), warranty certificate, geo-tag of

manufacturing location, and rating plate data as per relevant IS/BS/ISO .......

.............requirements. The OEM/Contractor shall provide a Remote Monitoring System (RMS) with

minimum one (1) year connectivity (SIM/data plan/server access as applicable), including

dashboard access, user ID/password, and data download facility. RMS shall, at minimum, capture

and report: DG status (Auto/Manual/Off), start/stop events, kW/kVA/kVAR, V/I/Hz, PF, run hours,

fuel level, battery voltage, alarms/trips with time stamp, and GPS/location (where supported). All

licences/subscriptions required for the stated period shall be included in the quoted price.

Erection, testing, commissioning and satisfactory performance demonstration shall be carried out

as per site requirements and as directed by the Engineer-in-Charge. The scope shall include pre-

commissioning checks, insulation resistance tests, no-load and load trials, safety/protection checks,

and performance test on load bank (where directed) with submission of test records at OEM

premises. The contractor shall provide initial consumables including f........

..............irst fill of diesel fuel ( 80% of fuel tank capacity at the time handing over ), lubricating oil,

coolant, etc. required for commissioning and the specified tests. The bidder/OEM shall provide

comprehensive warranty/guarantee including repair/ rectify/ replacementof any spare parts,

engine, alternator, control panel, RMS, replacement of battery, enclosure and all accessories(

excluding consumable item like oil, fiter etc.). The period of guarantee shall be consided upto

defect liability period complation or releace of final security ......

...........deposit which ever is later. The warranty/guarantee shall be start from the date of NOC or

handing over whicg ever is later. covering defects in materials and workmanship. During warranty,

all spares/repairs/replacements and visits required to maintain the DG set in serviceable condition

shall be carried out at no additional cost.including All necessary statutory approvals, inspections,

testing and certification from the Electrical Inspector/competent authority (including Supply , testing

and sealing of energy meter(s) & CT & meter box wherever applicable) shall be arranged and

obtained by the contractor .........

...............within the quoted scope and time, at no extra cost. Required O&M manuals, as-built

drawings, warranty certificates and training to operating staff shall be provided prior to handing

over. Factory testing shall be carried out with fuel and load bank at 0.8 power

factor and the DG set shall be offered for inspection prior to dispatch. Cost inclusive of .........

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

..........Diesel, To & Fro Fair, Lodging boarding etc. of two engineer of corporation.

Note: The DG set specifications shall comply with the latest CPCB guidelines/notifications and all

applicable local rules/regulations prevailing as on the last date of tender submission applicable local

rules/regulations prevailing as on the last date of tender submission

(A) Agency has to provide DG set 50 KVA ,BHP not less than 76 BHP with diesel of 80% of fuel

tank capacity , Heavy Duty standard oil M.S./ PVC Barrel & Diesel Filling hand Pump of required

capacity at the time of Handing over. ( (Diesel Engine- cummins, Mahindra, koel, caterpiller)

(Alternator- crompton, stamford, Leroy- Somer)

317 Executing comprehensive (All-in-All) service & maintenance( Four service per year & breakdown 1.00 Each 72600.00 RS: Forty Six Thousand Six

emergencyservice as and when required ) with consumable item like Oil filter, cartridge Fuel filter, Hundred Four and Paise Thirty Four

Element fuel filter, primary filter, fasety filter, dosing control unit filter, filter head unit, poly V belt, V- only

belet drive, volvoline engine oil, Volvoline coolant water etc. as per terms & condition of tender.

main agency has to give All-in-All comprehensive maintenance.......

........ contract of DG set OEM/Authorised dealer for a period of complation opf defect liability period

or release of find security deposit which ever is later and copy of this maintenance contract as per

annexure and FDR must be submitted with final bill. Agency has to submit FDR of approved bank

of GSPHCL, of Rs.72600.00 + GST or quoted amount which ever is .......

............higher to G.S.P.H.C.L. for minimum maturity period of Five years in favour of GSPHC,

Which will be released after successful completion of AMC & at the end of defect liability period. In

any case without submitting FDR final bill submission will not be done DG set agency has to

maintain written record of service & maintenance during defect liability period duly sign by police

dept. and submit regularly to G.S.P.H.C.L. DG set agency has to do maintenance........

........... as per terms & condition in tender. Agency has keep D.G. set for continuous trouble free

operation during defect liability period as per given list . otherwise GSPHCL shall not release the

FDR & Final SD.This item including cost of Three (3) year connectivity (SIM/data plan/server

access as applicable), including dashboard access, user ID/password, and .......

..........data download facility for Remote Monitoring System (RMS) ( Excluding first year which is

consider in Dg set item) . This SIM card shall be issused in the name of electrical agency who has

supply & commissing DG set and maintain the record of performance & maintenance datas of DG

1) Replacing the fuel filters & Oil filters.

2) Checking the alignment and tappet setting.

3) Checking the carbon brushes / AVE.

4) Checking the oil level and replace the oil.

5) Leakages IN/OUT Cylinder.

6) All Electrical .......

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

..........wrings including AMF panel if available.

7) Dynamo Setting.

8) RPM setting, Frequency & Voltage Adjustment.

9) Replacing material like fuel filters, gasket, tappet covers, diode rectifiers, Bridge rectifiers if found

defective and in not working condition.

10) Major Overhauling & Top overhauling shall be included in scope of Agency.

OEM has to Provide fitness certificate at the time of releasing S.D (For 50 KVA DG Set)

318 Supply, Installation, testing and commissioning of electric driven booster Terrace pump with 1.00 Each 33838.00 RS: Thirty Three Thousand Eight

automatic operation and consisting of following complete in all respects as required.( Terrace Pump Hundred Thirty Eight only

) (a) Horizontal type, Singlestage, End Suction pump ,Closed Coupled Pump of cast iron body &

bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 (b) 7.5 HP squirell

cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, .........

.............50 Hz AC supply with IP 55 class of protection for enclousure, horizontal foot mounted type

with Class-'F' insulation, conforming to IS-325.(C) M.S fabricated common base Plate, coupling,

coupling guard, foundation bolts etc. as required (d) Suitable Cement Concrete Foundation duly

plastered and anti vibration pads. (The All Required Technical Specification And Test Certificate

Shell Be Submitted TO Local Fire Authority For Approvel) 450 LPM AT 35 m HEAD

319 Supplying & erecting approved make motor control cubical panel (Direct - on - line) made from 16 1.00 Each 8811.00 RS: Eight Thousand Eight

G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors and locking, Hundred Eleven only

arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R- Y - B phases, overload relay, Automatic water level

........... wires duly socket crimped, main contactor & overload relay, start - stop push buttons, to be

erected on angle iron frame grouted on wall as directed. The isolator, overload relay & contactors

will be of L & T, Siemens or BCH make only. Rating of DOL Starter Panel as per Terrace Fire

Pump Requirement

320 Supplying, Installation, Testing & commissioning of Electric driven Main Fire Pump suitable for 1.00 Each 174726.00 RS: One lac Seventy Four Thousand

automatic operation and consisting of following, complete in all respects, as required: (a) Horizontal Seven Hundred Twenty Six only

type, Single stage, centrifugal, End Suction Long Coupled Pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel

cage induction motor, TEFC, synchronous speed 2900 RPM,....

............. suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for

enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.

(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

(d) Suitable Cement Concrete Foundation duly plastered with anti vibration pads. (e) cost include

foot valve of suitable size CI body heavy duty. (f) Discharge :- minimum 1620 LPM @ Head:-

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

...........manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point. Agency

has to calculate the total head required for getting minimum 3.5kgf/cm2 pressure at the farthest &

highest point of building of wet riser fire system. For that agency has to calculate total pump head

by considering vertical head ( Total Building height+ Sump depth+3.5kgf/cm2 pressure & Total

equivalent vertical head due to frication losses of total length of .......

model having required head & discharge( asper fire department rules) at duty point. No Extra

payment shall be done for head variation due to site situation & fire rules. The panel shall be design

according to motor H.P

321 Supplying, installation, testing and commissioning of Diesel engine driven Main Fire Pump suitable 1.00 Each 413853.00 RS: Four lac Thirteen Thousand

for automatic operation and consisting of following, complete in all respects, as required: [Diesel Eight Hundred Fifty Three only

driven pump]

(a) Horizontal type, Singlestage, centrifugal, End suction Long Coupled pump of cast iron body &

bronze impeller with .........

.........stainless steel shaft, mechanical seal conforming to IS

(b) Suitable HP 2900 RPM water cooled with radiator diesel conforming to relavant IS standard

complete with auto starting mechanism 12/24 Volts electric starting equipment, diesel tank, exhaust

pipe extended upto 10 M outside pump house duly insulated with 50 mm thick glass wool with

mm thick aluminium sheet cladding, residential silencer, instrument and ........

.........protection as per standard specification, stop solenoid for auto stop in the event of fault with

auto indications painted with post office red color etc. as required.

(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

(d) Suitable cement concrete foundation duly plastered with anti vibration pads.

(e) Cost include providing, erecting req. size copper XLPE Armound cable with GI cable tray,

support etc. as per EIC instruction (app. cable lenth 15 mtr.)

(f) Cable from pump to panel .......

...........will be laid in cable tray or fixed on G.I./M.S. strip / channel as per instructions given by EIC

as per site requirement.

(g)Cost include foot valve of Suitable size CI body heavy duty (SANT,Kirloskar, Kartar, Zoloto

(h)Discharge:- minimum 1620 LPM @ Head:- minumum 56Mtr.

[The all require Technical specification & Test certificate shall be submitted to Local fire Authority for

(Factory inspection will have to carried out by agency with G.S.P.H.C.L. engineer)

322 Supplying, installation, testing and commissioning of electric driven pressurisation pump 1.00 Each 81592.00 RS: Eighty One Thousand Five

suitable for automatic operation and consisting of following, complete in all respects, as Hundred Ninty Two only

required: (Jockey Pump).

(a) Horizontal type, Singlestage, centrifugal, End suction Long Coupled pump of cast iron body &

bronze impeller with .......

.........stainless steel shaft, mechanical seal conforming to IS

(b) Suitable HP Squirrel cage induction motor, TEFC type suitable for operation on 415 volts,

phase, 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type

with Class-'F' insulation,conforming to IS :

(c) M.S. fabricated Common base........

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

......... plate, coupling, coupling guard, foundation bolts etc. as required.

(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.

(e) Required size 3 core flat cable from pump to panel for connection should be provided with

(f) Cable from pump to panel will be........

........... laid in cable tray or fixed on G.I./M.S. strip / channel as per instructions given by EIC as per

site requirement.

(g) Cost include foot valve of suitable size CI body heavy duty.(SANT,Kirloskar, Kartar, Zoloto

(h) Discharge:- minimum 180 LPM @ Head:- minumum 56 Mtr.

(Factory inspection will have to carried out by agency with G.S.P.H.C.L. engineer)

323 Fabrication, supply, installation and commissioning of electrical control panel of cubical 1.00 Each 256783.00 RS: Two lac Fifty Six Thousand

construction, floor mounted type, fabricated out of 2 mm thick CRCA sheet, compartmentalised with Seven Hundred Eighty Three only

hinged locable doors, dust and vermin proof, power coated of approved shade after 7 tank

treatment process, cable alley, inter connection with suitable size copeer conductor ..........

.......cable/solid copper strip having switchgear and accessories, mounting and internal wiring, earth

terminals, numbering etc. complete in all respect suitable for main fire pump, pressurisation pump

and diesel pump set complete as per specification with following incoming and outgoings suitable

for operation on 415 V, 3 phase 50 Hz AC supply with enclosure protection class IP 42 as required.

250A, 50 KA 4 Pole MCCB Ics=100% Icu rating.

LED type RYB phase indicating lamp, ON, OFF, TRIP indicationg lamps.

Set of copper busbar 300 A.

OUTGOING:-

type ON, OFF and TRIP indicating lamps.)

MAIN FIRE PUMP:

125 A 50kA TPN MCCB Ics=100% Icu with fully automatic star/delta starter suitable for 60 HP

pump with overload.......

.......... protection current sensing type single phase preventor complete with all accessories and

operation.

JOCKEY PUMP:

63 A 50kA TPN MCCB Ics=100% Icu with suitable HP fully automatic Star/Delta starter with

overload protection, current sensing type single phase preventor complete with all accessories and

internal .......

operation.DIESEL ENGINE CONTROL:

push buttons, start/stop in manual mode.

2) Indicating lamp for high/low ........

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

...........lub oil pressure, high water temperature and engine ON indication.

meter and 0-20 A DC Ammeter.

4) All standard relays and accessories for autoamtic operation of diesel engine.

SYSTEM CONTROLLER:

Design, supply, installation, .........

.........testing and commissioning of system controller to control operation of main electric fire pump,

Pressurisation (Jockey) Pump, Diesel pump and terrace pump in sequence as per specification

consisting of relays, timers, sensors, annunciation window for fault indication complete as per

specification.

324 Providing and fixing of Dial type Pressure Gauge having 100 mm dial & range of 0-14 Kg/cm2 with 3.00 Each 1539.46 RS: One Thousand Five Hundred

isolation ball valve. (Make:- Hguru, Fiebig,General Instrument) (Test certificate must be submitted) Thirty Nine and Paise Forty Six only

325 Providing and fixing of Pressure switch with Needle valve ( Indfos,Honeywell,System Sensor make 2.00 Each 1310.00 RS: One Thousand Three Hundred

and Model Instruct by EIC (Only) Ten only

326 Providing and fixing of Air Release Valve including Ball Valve 25 mm dia. (Approved ISI make & 2.00 Each 1601.00 RS: One Thousand Six Hundred

model approved by EIC strictly as per specification) One only

327 Supply, Installation, Testing and Commissioning of On- Off Push Button Switch with all 4.00 Each 380.00 RS: Three Hundred Eighty

require..(Make:Morley / GST/ Ravel make and model approved by EIC as per specification) [Test only

certificate must be submitted]

328 Providing and erecting PVC insulated PVC Sheathed flat flexible copper cable ISI marked approved 100.00 Mtr. 171.00 RS: One Hundred Seventy One

make of size with all require accessories [d] 3 Core x 6 Sq. mm for Jockey pump only

329 Providing and erecting PVC insulated PVC Sheathed flat flexible copper cable ISI marked approved 100.00 Mtr. 484.00 RS: Four Hundred Eighty Four

make of size with all require accessories [f] 3 Core x 16 Sq. mm for main pump only

330 Supply and laying of 4 core x 1.5 sq.mm Copper Armourd cable with all require accessories [From 180.00 Mtr. 107.00 RS: One Hundred Seven only

fire panel in pump room to fire duct for ON-OFF switch connection for fire system]

331 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked 1800.00 Mtr. 39.00 RS: Thirty Nine only

copper wires of following size to be erected as directed.For 1.50 Sq.mm 2 core round PVC

sheathed. having insulation colour RED and BLACK for Fire Alarm System.

332 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal 70.00 Each 2415.00 RS: Three Thousand Nine

detector having IS-11360-1985 or BS 5446 Part I-1977 & Part VII –1985 (VdS approved) or Hundred only

NFPA72 ( LPCB/ UL/ULC/FM approved) with Latest ammendment complete with mounting base &

Plate complete as required.( Make:- Edwards, Notifier, Siemens , Schneider, GST )

333 Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate 5.00 Each 2288.00 RS: Three Thousand Nine

of rise cum fixed tempreature thermistor having IS-2175 - 1988 or BS-5445 ( EN 54) Part 5 Hundred only

–1977(VdS approved) or NFPA72 (LPCB/ UL/ULC/FM approved) complete with base & plate as

required.( Make:- Edwards, Notifier, Siemens , Schneider, GST )

334 Supplying, installation, testing & commissioning of addressable manual call point having IS or 8.00 Each 3271.00 RS: Six Thousand only

BS (EN 54) (Vds approved) or NFPA 72 (LPCB/ UL/ULC/FM approved) with Latest Amendment

complete as required ( Make:- Edwards, Notifier, Siemens , Schneider, GST )

335 Supplying, installation, testing & commissioning of addressable Hooter cum strobe having IS or 8.00 Each 2966.00 RS: Seven Thousand Five

BS (EN 54) (Vds approved) or NFPA 72 (LPCB/ UL/ULC/FM approved) with Latest Amendment Hundred only

complete as required. ( Make:- Edwards, Notifier, Siemens , Schneider, GST )

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

336 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box 7.00 Each 228.00 RS: One Hundred Fifty only

having two LED, metallic cover complete with all connections etc as required. ( Make:- Edwards,

Notifier, Siemens , Schneider, GST )

337 SITC of Microprocessor based Net-workable Analogue Addressable Fire Alarm Control Panel. The 1.00 Each 93005.00 RS: Ninty Three Thousand Five

Panel shall be compliant with EN54-2, EN54-4 and approved by LPCB. The Fire Alarm Control only

Panel shall have inbuilt one loop. The Panel must have large graphic display. The Panel must also

have the capability to take Addressable Intelligent Wired and Wireless Devices on same loop. Each

loop shall have a capacity of 127 analogue Addressable devices and ........

.........127 Base sounders/Base Sounder Beacons. The Panel shall have 240 V AC power supply

along with automatic Battery Charger. Non-Networkable

Approved by LPCB [GST, Morley, Bosch, HOCHIKI, ESSER model approved by EIC as per

specification] (Including Five year free maintenance with guarantee) (Including Five year free

maintenance with guarantee)

338 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having capacity 6 kg Filled with 20.00 Each 1991.00 RS: One Thousand Nine Hundred

Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Ninty One only

Pressure Gauge, Can Height 530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec,

Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on

Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can ........

..........Construction : Deep drawn & CO2 Mig welded, EPDM(Ethylene Propylene Diene Monomer)

Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External

Coating - Pure Polyester Powder coating (UV Resistant),Brass forged CE Marked valves with NRV

& Auto Safety Release with safety Pin is of SS material, Made up from 1.6mm thick sheet,

Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance Weight:-Gross Weight

Kg, Empty Weight 2.9 Kg, 1. Necessary...........

.... certificate & and guarantee must be attached, 2. OEM has to provide wall mounting heavy

duty bracket/clamp, screw, hardware for installation. 3.Following printed marking Manufacturing

Date and Expiry Date must be mention on Extinguisher 4. Refilling period must be of 3 Years.

Following Printed marking on equipment must be required:- Model No, Capacity, Gross Weight,

Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with necessary numbering /

marking with oil paint by painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX,

MINIMAX, CEASEFIRE)

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

339 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire Extinguisher, filled with Co2 20.00 Each 6526.00 RS: Six Thousand Five Hundred

Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Twenty Six only

Electrical non-conductor Polyethylene Flat Horn with Diffuser Nozzle for dispersed discharge of

CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically

started Fire, Fire Rating 55B, Internal coating is not applicable & External coating is of enamel spray

painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction:

hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO (

Petroleum and Explosives Safety Organization) APPROVED, Minimum Wall Thickness 4 to

mm, Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance Weight:-Gross Weight

16.4, empty weight 11.9 Kg, 1. Necessary certificate & and guarantee must be attached, 2. OEM

has to provide wall mounting heavy duty bracket/clamp, screw, hardware for installation.

3.Following printed marking Manufacturing Date and Expiry Date must be mention on Extinguisher

4. Refilling period must be of 5 Years. Following Printed marking on equipment must be required:-

Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling

Due. [with necessary numbering / marking with oil paint by painter as instructions given by

G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

340 Providing and fixing of Automatic type 5 kg Fire Extinguishers Mono Ammonium Phosphate 1.00 Each 5240.00 RS: Five Thousand Two Hundred

powder 50% Confirms to IS 4308, Applicable fire classes A,B & C, UGTS Pressure Gauge, Can Forty only

Height 370mm, Diameter 230 ± 10mm, Made up from 2 mm thick sheet, Body Construction Deep

Drawn with MIG Welding technology, Brass forged sprinkler valves with Nozzle is specially

designed to give more than 99% discharge. Together with orifice characteristic.......

............. to cover adequately fire risks with scattering cone of 40 to 45° Angle. External Pure

polyester (UV resistant) and Internal Epoxy polyester powder coated, Heat Sensitive Glass bulb of

68 °C. Area covered will be 2-2.5 m2 and volume of coverage is 7 m3. Referance Weight:-Empty

Weight 2.64 kg, Full weight 7.64 kg, 1. Necessary certificate & and guarantee must be attached,

OEM has to provide heavy duty wall/ Ceiling mounting Bracket/ clamp, screw, hardware for

installation. 3.Following printed marking Manufacturing .....

.........Date and Expiry Date must be mention on Extinguisher 4. Refilling period must be of 3 Years.

Following Printed marking on equipment must be required:- Model No, Capacity, Gross Weight,

Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with necessary numbering /

marking with oil paint by painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX,

MINIMAX, CEASEFIRE)

341 Executing comprehensive (All-in-All) service & maintenance with spare parts as per terms & 1.00 Per 60864.00 RS: Sixty Thousand Eight

condition of tender for Fire terrace pump with fire hydrant agency for defect liability period and copy Job/Per Hundred Sixty Four only

of this contract will be submitted before final bill. Agency has to quote rate accordingly. Agency has Tower

to also provide the fitness certificate from system agency and submit to G.S.P.H.C.L. Agency has to

submit FDR of Rs.60864.00+GST or quoted rate whichever .........

.........is higher to G.S.P.H.C.L,for minimum maturity period of Four years in favour of G.S.P.H.C.L

Which will be released after successful completion of A.M.C. & at the completion of defect liability

period. Fire System agency has to maintain written record of service & maintenance during defect

liability period duly sign by police dept. and submit regularly to G.S.P.H.C.L. Agency has to give

minimum three services and demonstration per year and testing and training of pump during defect

liability period and obtain necessary certificate from police department and submit to G.S.P.H.C.L.

Agency has to do maintenance as....

Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

In Figure In Words

........... per terms & condition alternative in tender.Agency has to give One live demonstration of fire

Mock drill for fire fighting with minimum 01 no. CO2 and 01 no. ABC type fire extinguisher at the

time of handing over this system to the Police department and another at the time of releasing final

Security deposit. The necessary certificate / photographs for that must be submitted.