Varshik anurakshan 2025-26 ke antargat janpad pauri ke vikashkhand pokhra me pokhar se khurkpal motor marg ke km 16, 17, 18, 19 wa 20 mai PC dwara navinikaran ka karya

Amount

Maintenance of Earthen Shoulder with filling of fresh soil or striping of excess soil whichever is required to achive the required level of shoulder

The maintenance of drains include erosion, repair, clearing, cleaning, reshaping,regrading, deepening of side drains as well as catch water drains as per technical specification Clause 1907..

WBM Grading 3 Providing, laying, spreading & compaction of stone aggregates of specific sizes to WBM specifications including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonn in stages to proper grade & camber, applying & brooming requisitet coarse aggregates,watering & rolling making necessary earthen bund to protect edges lighting, guarding & barricatings, & maintenance of diversions etc.[Grading of no-3] (22.4 - 53 mm size). By By Mechanical Means.

Prime Coat. Low porosity Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.case ii by mechanical means Bitumen (VG-10)

Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510.By Mechanical Means .Case - II : Type B.Bitumen (VG-10)

Cleaning of partially choked scupper and catchpit complete as directed by the Engineer-in-charge.

Cleaning of fully choked scupper and catchpit complete as directed by the Engineer

SATENDRA SINGH (BID ID -394632)

Dinesh singh panwar (BID ID -394612)

RAKESH KUMAR GAUR (BID ID -394640)

Upendra Bhatt Contractor (BID ID -394669)