Renovation of old store room by removing old wiring, P/F POP light, fan, exaust fan, wiring, sealing of window by PVC sheet and P/F moveable rolling storage unit for account section, R&C office, UGVCL, Mehsana Campus

Name of Renovation of old store room by removing old wiring, P/F POP light, fan, exaust fan, wiring, sealing of window by PVC sheet and P/F moveable rolling storage unit for account

work: section, R&C office, UGVCL, Mehsana Campus.

Quantities estimated Tendered

Total Amount according to

Total Amount according to

It. No. Item of work but may be more or Unit Rates in Rs.

estimated quantities

1 P/F Mechanical double face movable unit of 900mm deep including all materials by using 22 SWG 38.00 Smt 19429.30

mm thick C.R.C.A. steel sheet, 30mm solid round guide channel press fit in to cold formed 'U' channel

made from 14G Thick material, 4 nos. of C.I. wheels 128mm dia x 35mm, traction chain of 1/2" size,

Anti tilt arrangement on rear side of unit, driving wheel of 3 inseratble arms with central hub, 10 lever

central locking arrangement, Individual unit lock system & stoppers, Indexing arrangement made of

acrylic sheet for numbering and naming.

Powder coating on metal sheet for anti-rust treatment & finishing.

2 P/F Mechanical single faced fixed unit of 450mm deep including all materials by using 22 SWG mm 13.00 Smt 11103.40

thick C.R.C.A. steel sheet, 30mm solid round guide channel press fit in to cold formed 'U' channel made

from 14G Thick material, 4 nos. of C.I. wheels 128mm dia x 35mm, traction chain of 1/2" size, Anti tilt

arrangement on rear side of unit, driving wheel of 3 inseratble arms with central hub, 10 lever central

locking arrangement, Individual unit lock system & stoppers, Indexing arrangement made of acrylic

sheet for numbering and naming.

Powder coating on metal sheet for anti-rust treatment & finishing.

3 P/F Mechanical single face mechanical unit of 450mm deep including all materials by using 22 SWG 13.00 Smt 13268.20

mm thick C.R.C.A. steel sheet, 30mm solid round guide channel press fit in to cold formed 'U' channel

made from 14G Thick material, 4 nos. of C.I. wheels 128mm dia x 35mm, traction chain of 1/2" size,

Anti tilt arrangement on rear side of unit, driving wheel of 3 inseratble arms with central hub, 10 lever

central locking arrangement, Individual unit lock system & stoppers, Indexing arrangement made of

acrylic sheet for numbering and naming.

Powder coating on metal sheet for anti-rust treatment & finishing.

4 Supply, Installation, Testing and Commisioning of Surface mounted downlight Intergra Neo Surface 10.00 Nos 2597.00

with system power: 15 W, Luminous flux of luminaire 1200 lm, Colour temperature of 4000 K, Neutral

white, CRI > 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours;

energy-efficient LEDs, direct light emission,white powder coated polycarbonate housing, and pressure

die cast heat sink, Opal diffuser for homogenous light distribution, electronic control gear,Protection

Havells Cat No: INTEGRANEOSURFA CEDLS15WLED857S or equivalent

5 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI 2.00 Nos 1929.00

mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium

blades with , canopy & 30 cms. down rod erected with 24/ 0.2, 3 core flexible wire with earthing.(Make

shall be approved by Engineer in charge))

6 Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 1.00 Nos 2009.90

RPM with square frame ABS body with inbuilt lowers & square frame.

7 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI 5.00 Nos 495.00

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type

of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.(f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling completeCat. III

8 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV 8.00 Nos 523.00

grade FRLS PVC insulated multi strand copper wires up to 20 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of

accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

completeCat. III

9 Remove AC/ Switch Board/POP Touching/ Wall cutting for exaust fan/PVC sheet on windows other 1.00 Nos 15000.00

10 Labour charges - Mazdoor (Male)- for Misc Works 15.00 Nos 493.00

11 Providing & fixing 15Amp. 250 Volt ISI mark plug socket with switch on same switchboard provided for 5.00 Nos 364.00

item no.1 including necessary wiring & adequate earthing wire as per specification & instructions of

E.I.C. Laying of Phase wire, (2+3 Plug socket, 2-in-1 plug socket on the board, with the switch) Rates are

applicable per POINT

12 Providing & Fixing curtains for window with S.S. curtain rod and bracket/clamp /ring with complete 20.00 SMT 1996.00

accessories incl powder coating of approved shade & make. for fixing the same in line & level with

premium quality and elegant style Main Cloth + blackout curtain fabric incl.stiching charges for curtain

and labour charges for fixing brackets/clamps & Power track channel/curtain rod etc.complete as

directed by E.I.C. NOTES : Measurements will be paid in sq. mt.for

the area of window opening.

A Estimated Cost Rs.

B Bidder’s Offer (+ / -) in % ------------- [B]

C Grand Total C = A +/- (A*B)]

D Add 1% Welfare cess on C 1.00%

E Goods & Service Tax E = (C+D )x GST% i.e. 18% as applicable on the date of tender in

F Grand Total including welfare & GST ----- F = C + D+E -------------------------------

F Grand Total including welfare & GST ----- F = C + D+E -------------------------------

Final Offer (in Rs.)

Final Offer (Rs. In Words)

We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put up by UGVCL on WEB site. I/We hereby accept all the conditions and specifications of this tender

document, and accordingly, I/We am/are willing to carry out the work at quated rate as above.

SIGNATURE OF CONTRACTOR Superintending Engineer

(With rubber stamp/seal of the company) Circle Office, Mehsana