Periodical services with face lifting to external/internal of Officers and JCO/OR Md Accn at Yol Cantt under AGE B/R-II of GE (KH) YOL

Amount

Preparation of old decorated plastered or unplastered surfaces including cleaning by brooming down or with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and cleaning oil and greasy spots and applying one coat of white wash on walls with mechanical roller, complete all as specified and as directed.

All as per item No. 1 above but one coat of white wash on ceiling.

All as per item No. 1 above but one coat of oil bound distemper on walls with mechanical roller.

Complete removal of existing treatment of old surface including brooming down/steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spoutes and cleaning with water on wall and preparation of plastered surface of walls and applying two coats of oil bound distemper with mechanical roller over a coat of primer over 1mm thick wall care putty, complete all as specified and directed as Engr-In-Charge.

All as per item No. 1 above but one coat of cement base paint on walls external surfaces with mechanical roller.

Preparation of old decorated painted/plastered wall surfaces including cleaning by brooming down or with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and treating oil and greasy spots and applying one coat of exterior emulsion (acrylic emulsion paint) with mechanical roller, complete all as specified and as directed by Engr-In-Charge.

Preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Applying one coat of synthetic enamel paint on old steel surfaces surfaces of any description, n.exc. 10cm width or girth, including preparation of surfaces, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed.

Taking down of old decayed plaster from RCC fin, facia, cleaning of all surfaces by brooming, scraping etc. and applying one coat of anti corrision paint to visible reinforcement and replastering the same or finishing with 1:2:4 (1 cement: 2 sand: 4mm micro chips) including chiken wiremesh and necessary formwork if required as per existing surface and applying two coats of exterior emulsion over a coat of chalk whitining primer including preparation and necessary scaffolding etc., complete all as specified and directed as Engr-In-Charge.

Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement :4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on stone masonry, cement concrete surfaces, surface finished even and smooth without using extra cement with WPC @ 3% (external surfaces), complete all as specified and directed. Note :- water proofing compound shall be measured and paid separately.

Applying one coat of exterior emulsion (acrylic emulsion paint) with mechanical roller on newly plastered wall surfaces including preparation of surface, complete all as specified and directed as Engr-In-Charge.

Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement :6 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on other than fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.

Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.

Applying two coats of oil bound distemper including over 1mm thick wall care putty on newly plastered wall surfaces including preparation of surface, tint and shade as approved by Engr-in-Charge.

Three coats of white wash on newly plastered wall surfaces including preparation of surface, complete all as specified and as directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall of bore 110mm, complete all as specified and directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall of bore 75mm, complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore, provided with oval access door, fixed, complete all as specified and directed.

PVC (SWR) bends any radius, 110mm bore jointed with solvent cement and fitted with oval access door, fixed, complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal, 110mm bore, provided with oval access door, fixed, complete all as specified and directed.

PVC (SWR) bends any radius, 75mm bore jointed with solvent cement and fitted with oval access door, fixed, complete all as specified and directed.

Writing letters or figures (Block, Roman, Italic or Indian) n exc. 2cm high on painted surfaces using synthetic enamel paint, complete all as specified and directed.

M/S SAGAR SALES CORPORATION (BID ID -3116350)

Eshaan Construction Co. (BID ID -3117212)