SPECIAL REPAIR TO HT CABLES AT AIR FORCE STATION PHALODI

Amount

Excavating in trenches in soft/loose soil., n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, for pipes and electric cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as speified and as directed.

Excavating in trenches in hard soil., n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, for pipes and electric cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as speified and as directed.

Taking out old under ground HT XLPE/PVC cable of any size for finding out fault from trenches/wall/roof/road/pipe/pole/ including taking out of PCC cable cover and electric cable and segregation/staking of serviceable cable covers and electric cable from trenches for reuse and removing broken cable covers and defective/burnt electric cable from site complete all as specified and as directed by Engineer-in-Charge. (Excavation and earth work shall be measured and paid for separately under appropriate item).

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. Returning, filling including spreading, leveling watering & well ramming in layers not exc. 25 cm for soft/loose soil.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point for soil.

Cutting of road / hardstanding upto a size not exceeding 20cm in width and not exceeding 60 cms in depth for laying of HT UG cable protection pipe line making good the disturbed portion so as to match existing finishing or with PCC (1:2:4) type B-1 complete all as specified and as directed.

M&L for providing dry tibba sand in trenches as sand cushioning to underground cable including punning down of sand in layer all as speciied. (Note :- 18 cm punned thickness shall only be reckoned for the purpose of measurement and paymentmeasured and paid).

Supply and lay un-reinforced precast concrete cable cover class HV, type 1, flat of size 300mm x 180mm x 40mm complete all as specified and as directed.

Supply, lay, joint, test and commission XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured overall PVC sheatehed electric power cable heavy duty with aluminium conductor of size 3 core 95 sqmm crosssectional area, 11000 Volts grade Earthed (11 KV earthed system), laid in trenches, fixed on wals,roofs and poles, laid in ducts and floors etc complete all as specified and directed. Note : Earth work, sand cushioning, cable protection cover, pipe and joint shall be measured and paid for separately under respective items of BoQ

Supply, lay and fix 80 mm bore galvanised iron pipe with all fittings as protection for electric cables, laid in trenches, fixed on poles, walls and ceilings or laid in floors, laid in road crossing /hard standing/pole protection fixed with clamps as per site requirement etc complete all as specified and as directed.

M&L for HT Cable route indicator made out of Cast Irom plate 100mm dia, 6mm thick & fixed over mild steel angle iron of size 60x60x6mm, 120 cm in length duly painted with two coats of aluminium paint suitable for HT cable, embeded in block of PCC (1:3:6) type C- of size 30cmx30cmx20cm complete all as specified and directed.

S&F in replacement Heat shrinkable straight through joint suitable for HT XLPE cable of size 95 Sqmm 3 core armoured 11000 Volts grade heavy duty complete all as speicified and directed by Engineer-in-Charge

S&F in replacement Heat shrinkable end termination joint outdoor type suitable for HT XLPE cable of size 95 Sqmm 3 core armoured 11000 Volts grade heavy duty complete all as speicified and directed by Engineer-in-Charge

S&F in replacement HT feeder pillar box factory made cubical type dust,weather,vermin proof, out door type both side opening of size 110cm x 100cm x 60cm made out of CRCA sheet 3.15mm thick, conforming to IS-5039, Protection Class IP-54, epoxy phosphatised powder coated in seven tank process, machine pressed, front opening in two halves with rubber gasket / bedding , locking arrangement with sliding bolt including aluminium bus bar of size 50 x 10 mm and 80 cm long, 3 strips mounted on HT insulators each strip should be munted minimum two insulator and nuts, bolts; panel shall be mounted on angle iron frame and legs made from angle iron of size 50x 50 x 6 mm and legs 40 cm long duly spray painted internally and externally with two coat of synthetic enamel paint over a coat of red oxide primer grouted in PCC (1:2:4) type B-1 using 20 mm graded stone aggregate complete incoming / outgoing cable provision complete all as specified and directed.

Aggarwal brothers and company

M/s Prem Associates

RISING ELECTRICALS

Jeet Construction

JASNATH ENTERPRISES

SANJOLI CONSTRUCTION COMPANY

SAGGI ELECTRIC COMPANY

Deccan Enterprises