REPAIR TO BADMINTON/BASKETBALL COURTS, STORAGE ACCN AND OTHER MISCELLANEOUS B/R REPAIR IN CERTAIN OTM ACCN BLDGS IN NORTH ZONE AND CERTAIN MISC B/R REPAIRS TO MES OFFICE BUILDINGS, STORAGE YARDS, SOLAR POWER PLANT ETC UNDER GE (NORTH) BINNAGURI

Amount

Taking down chowkats or frame exc 1.5 Sqm but n.exe 4 Sqm each including Builders Hardware without taking off shutters from the frame complete all as specified and as directed.

Taking down chowkats or frame n.exc 1.5 Sqm each including Builders Hardware without taking off shutters from the frame complete all as specified and as directed.

S&F factory made Pressed steel frames confirming to IS , having profile of size 105 x 60 mm, 1.25 mm thick MS Sheet for doors with one or more rebates including necessary Supply & fixing lugs, lock strike plate, etc. 100 mm size hinges with one shop coat of zinc chromate primer and fixing complete all as specified and as directed.

S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed.

S&F of 35mm thick 2nd class hard wood factory made, plain, framed, paneled shutter (two panel) with lock rails and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 Part-I klin seasoned and chemically pressure treated complete all as specified and as directed.

S&F of factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails MS frame shall be covered with heat moulded plain clolur PVC `C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stile and plain clolur PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per manufactures instruction, specification complete all as specified and as directed.

S&F of stainless steel butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.

S&F of aluminium handles cast type anodised 150mm of size complete all as specified and as directed.

S&F of 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F in repair aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.

Dismantling of steel window and ventilator of any description and size including grill/guard bar complete all as specified and as directed.

S&F for factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri zone Drawing No. CESZ/2018/TD-07, sheet 1/3 to 3/3 with double shutter i.e. glazed and wire gauged shutter including all fittings and fixtures like MS hold fast, box type hinges, handles, MS tower bolt, stopper, MS guard bar/grill etc complete including one shop coat red oxide primer complete all as specified and as directed. Notes:- (a) Window with double shutter i.e. glazed shutter & gauged shutter including grill/guard bar with all fittings & fixtures shall be measured as one unit and no extra shall be measured and paid separately. (b) Glass, wiremess, MS guard bar/grill and painting only shall be measured and paid separately under relevant items.

S&F in steel window with side hung shutters including projecting type hinges with steel handles steel peg stay fixing lugs complete with glazing bar 10 cm dovetailed or welded including shop coat red oxide primer compete all as specified and as directed.

S&F for ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F for framed work such as grills/MS guard bar, gratings etc. with ends of bars, hollow sections shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, notching for wire, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, welding etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new primer applied steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F figured glass, pin head type 5 mm thick in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.

M&L for PCC type C-1, 1:3:6 using 20mm graded stone aggregate as in bed block for fixing of hold fast, filling concrete in frame filling, gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work as required complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plain exc mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for applying average 15mm thick plaster in two coats (10+5mm) with ready mix pre-packed proportioned dry mix mortar, blended with PP fibres, mixed with liquid water proofing compound on fair faces of brick wall or concrete surfaces additives on external surfaces including transporting of material, mixing, curing, scaffolding etc complete all as specified and as directed. Note : Liquid water proofing compound will be measured and paid separately as supply only. Name of Manufacturer : M/s ACC Accoplast/M/s Premier Floor to Roof Materials Pvt Ltd/ M/s Ultratech Cement Ltd /M/s Sound Builder care Pvt Ltd or other approved equivalent makes.

M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) finished even and fair without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for preparation new internal wall surfaces with one coat wall putty and applying two coats of distemper acrylic emulsion over one coat of primer complete all as specified and directed.

M&L for preparation of newly wall plastered surfaces and applying three coats of white wash on wall to match the existing colour complete all as specified and as directed.

M&L for one coat of white wash on old surface of wall with brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and using 15 mm thick using cement mortar 1:6 complete all as specified and as directed.

M&L for DIGITAL ELEVATION TILES of size 300 x 600 x 7-8mm thick as approved by GE/Engr-in-Charge on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed. Notes for Item No. 37 to 41:- (a) The rates include for all straight cutting and waste including raking or circular cutting and waste complete. (b) All corners in wall tiling should be properly metred jointed to give monolithic uniform appearance. (c) Design/pattern of tile flooring shall be as approved by Engineer-in-Charge/GE. (d) The rates for tiling includes for laying to any pattern with one or more colours as directed. (e) If tiles of different sizes are used then no price adjustment shall be made.

S&F for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors/skirting etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for providing and laying of 300x300 mm/200 x 200 mm & 20mm thick Anti-Skid pavement tile Endura vitrified tile of "H & R Johnson India" or equivalent in pavit or NITCO or techno commercially equivalent make as listed in List of Makes in approved color & Shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note: Design/pattern shall be as approved by GE at the time of execution.

M&L for Diamond cut kota stone slab flooring 20-25mm thick, pre-polished (mirror finish), crack resistance, optimum strength, cut to required size, having excellent stone resolvability, non-slippery, tough etc over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete with screed bed or bedding layer of mortar 20 mm thick for laying the same in cement mortar 1:6 complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for PCC 25mm thick type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

M&L for PCC (1:3:6) Type C-2 (20 mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth w/o using extra cement complete all as specified. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.

M&L for 75 mm thick cement concrete type C2 in 1:3:6 with 40 mm graded stone aggregate as in sub base to receive a surface complete all as specified and as directed.

M&L for Providing, cement concrete Type B1 1:2:4 using 20 mm graded aggregate in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed.

S&F of tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed. Note: The serviceable steel tubing obtained from taking down shall be reused.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and as directed.

S&F of tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

S&F in repairs 15 mm dia Bib taps, CP cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repair 15mm dia concealed stop cock/angle cock CP, cast copper alloy fancy type with long shank and cup for 15mm pipe complete all as specified and as directed.

S&F PVC (SWR) multi floor trap 75mm/100mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F ceramic under counter wash hand Basin Glossy finishes, size 22x16x8 inch size including CP waste coulping, PVC connection 450 mm long, waste pipe and removing the existing Basin, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.

S&F in repairs 15 mm bore pillar taps, capstan head, cast copper alloy, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F stainless steel towel ring and including Chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S & F of polycarbonate wall mounted soap dish fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Taking down wall panelling and similar work complete all as specified and as directed.

S&F Solid PVC wall Lining consisting of 5mm thick Single Side Prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F for GI frame work for seamless ceiling comprising of FI perimeter channel 0.55 mm thick with two unequal flange of 20 and 30 mm dia and Web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx 900 mm centre to centre with FI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mm length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including all necessary accessories complete all as specified and as directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including all necessary accessories complete all as specified and as directed.

S&F rolled mild steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes including welding, grinding, buffing and making curvature (where ever required) and fitting the same with necessary conforming to IS – 1161 – 1979 or IS-4923-1968 complete all as specified and as directed.

S&F mild steel bands, straps or stays , plain angle cleat or flat iron cleat or securing purlins to steel trusses or rafters, knee piece, securing clits at base and similar small articles etc complete all as specified and as directed.

M&L for 75 mm thick cement concrete type D2 1:4:8 with 40 mm graded stone aggregate as in sub base to receive a surface complete all as specified and as directed.

M&L for PCC 40mm thick type B-1, 1:2:4 (using 20 mm graded stone aggregate) finished even & smooth using extra cement complete all as specified and directed. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 20 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.

M&L for five layers outdoor synthetic flooring minimum 3mm thick having the properties of water based and fast installation, optimised force reduction, low maintenance cost, long lasting with excellent durability, excellent slip resistance (Anti-slip), anti-aging, antibacterial, frictional finesse swift foot work, fine and synthetic surface, longevity, soft and comfortable surface, environmentally compatible momentous etc of any colour as approved complete all as specified and as directed.

S&F in repairs of Steel rolling shutters, thickness of laths 1.00 mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as directed and as specified.

S&F in repairs of safety lever locks mild steel with 4 levers for rolling shutters complete all as directed and as specified.

S&F in repairs of Ball bearing for rolling shutters complete all as directed and as specified.

INTERNAL ELECTRIFICATION Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Taking down carefully existing old/unsv sub main wiring of any size/description as existing at the sit including making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylam sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly complete for one Light point controlled by one, one way switch complete all as specified and as directed.

All as per item Ser No 80 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.

All as per item Ser No 80 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per item Ser No 80 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.

All as per item Ser No 80 here in before but for one bell point controlled by one, bell switch 5 Amps complete all as specified and as directed.

All as per item Ser No 80 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

S&F of switch piano flush type 5/6 amps single pole one way complete all as specified and directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.

S&F of switch piano flush type 15/16 amps single pole one way complete all as specified and as directed.

S&F of Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with and including taking down existing unserviceable complete all as specified and as directed.

S&F in repair switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, white/ivory finish flush non shutter non inter locking type with and including taking down existing unserviceable complete all as specified and as directed.

S&F in repair ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S & F in repair lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S & F deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.

M&L for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 Security light fitting luminaire with high power LEDs as light source and driver of capacity 25 watts withpre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor cable from ceiling rose to fitting and GI Pipe bracket made out of GI pipe medium grade 1.2 Mtr long 32 mm dia, MS clamp, nut, bolt and washers including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F Recess mounting flat panel 34 Watt LED fitting (2'X2') for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 4 Sqmm standard conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and as directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 6 Sqmm standard conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and as directed.

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in 25mm dia PVC rigid non- metallic conduit including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed. Note: Two runs of sub main wiring cable alongwith one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.

All as per item No above but using two runs 4.0 Sqmm multistranded copper conductor single core cable with one run 4.00 sqmm multistranded copper conductor single core cable as earth wire complete all as specified and as directed.

S&F sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unsv one all as specified and directed including taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unsv one all as specified and directed including taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

S&F in repairs MCB, Single pole & neutral, 32 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F in repairs MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F in repairs epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 Volts, C Series current carrying capacity 10 kA, including necessary connection complete all as specified and as directed.

M/S SINHA ENTERPRISE

Shri Amarnath Sah

SHRI ARABINDA GHOSH

M/S MAJUMDER CONSTRUCTION

SHRI MANOIRANJAN BISWAS

M/S RATNESH KUMAR SINGH

M/s. RAMPHAL GARG