Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹21.6 Cr
EMD Value
₹21.6 L
Closing Date
16 Sept 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at RLBCAU at Datia
NBCC/SBGDelhill/Datia/SportComplex/2024/76Dated02092024~EW8248dc9ae99791ca6e59d271
NBCC/SBGDelhill/Datia/SportComplex/2024/76Dated02092024
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹21.6 L
16 Sept 2024
2 Sept 2024
16 Sept 2024
2 Sept 2024
16 Sept 2024
GENERAL ABSTRACT OF COST
COST AS PER CIVIL COST AS PER
S.NO. DESCRIPTION HORTICULTURE DSR TOTAL (RS.)
DSR 2023 (RS.) MARKET RATE (RS.)
1. Cost index is not considered for the estimate of above titled work. The said Cost Index on DSR- 2023 cost is to be considered form your end.
2. All the rates for DSR items are considered on basis of CPWD DSR-2023. In case of any discrepancies in rate or nomenclature of item, the CPWD DSR-
2023 will take precedence.
Digitally signed by ARTI
NBCC (INDIA) LIMITED
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal
Science and college of Fisheries at RLBCAU at Datia.”
GENERAL ABSTRACT OF COST
COST AS PER DSR COST AS PER
S.NO. DESCRIPTION TOTAL (RS.)
2023 (RS.) MARKET RATE (RS.)
2.0 INTERNAL PLUMBING WORKS 9,12,357.31 1,58,538.48 10,70,895.79
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
DSR 2023 DSR 2023 Rate/ DSR Amount (RS.) /
DESCRIPTION Unit Quantity
CODE NO. Market Rate Market Amount (RS.)
1.0 CARRIAGE OF MATERIAL
1.1 By Mechanical Transport including loading,unloading and stacking
1.1.2 Carriage of earth
1.1.4 Carriage of excavated rock
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over
areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by
Engineer-in-charge.
2.6.1 All kinds of soil cum 350.81 177.50 62,268.78
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in
foundation over areas (exceeding 30cm in depth , 1.5 m in width or 10 sqm on plan),
2.7 including disposal of excavated earth, for all leads and lifts, disposed earth to be levelled
and neatly dressed.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
2.8 dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the
excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by
ramming and watering, lead up to 50 m and lift upto 1.5 m.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical
transport upto a lead of 5km also including ramming and watering of the earth in layers
2.25(a) not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for cum 669.90 700.50 4,69,264.95
Sand filling in plinth including supply of necessary quantity of sand from any distance at
2.27 site of work and including watering dressing etc. required for proper completion of work. cum 78.75 2,123.75 1,67,245.31
Surface dressing of the ground including removing vegetation and inequalities not
2.28 exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. sqm 0.00 34.15 0.00
2.28.1 All kinds of soil
2.34 Supplying chemical emulsion in sealed containers including delivery as specified.
2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 74.55 234.75 17,500.61
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite
2.35 treatment:
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25
litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/
2.35.2 Lindane E.C. 20% with 1% concentration metre 124.95 53.45 6,678.58
Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work up to plinth level
1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone
4.1.8 aggregate 40 mm nominal size derived from natural sources) cum 230.78 6,812.00 15,72,073.36
Centering and shuttering including strutting, propping etc. and removal
4.3 of form work for
Foundations, footings, bases for columns
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :
6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast
4.17 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including Sqm 82.95 749.30 62,154.44
necessary excavation, levelling & dressing & finishing the top smooth.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to
15° landings, balconies, shelves, chaijjas, lintels, bands, plain window sills, staircases and
spiral stair cases above plinth level up to floor five level, excluding the cost of centering,
5.3 shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) cum 22.71 11,505.50 2,61,289.91
derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived
from natural sources).
Centering and shuttering including strutting, propping etc. and removal of form for all
5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 227.85 392.15 89,351.38
5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 420.00 927.25 3,89,445.00
5.9.4 Shelves (Cast in situ) sqm 3.15 927.25 2,920.84
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 782.25 736.40 5,76,048.90
5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 291.90 961.30 2,80,603.47
5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 160.16 764.95 1,22,514.39
5.9.16 Edges of slabs and breaks in floors and walls.
5.9.19 Weather shade, chajjas, corbels etc. including edges. sqm 19.14 951.10 18,204.05
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in
5.22 position and binding all complete upto plinth level
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 13632.15 107.85 14,70,227.38
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500 D or more. kg 21049.58 107.85 22,70,197.20
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Providing and laying in position ready mixed or site batched design mix cement concrete
for reinforced cement concrete work; using coarse aggregate and fine aggregate derived
from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement,
admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of
concrete, to improve durability and workability without impairing strength; including
pumping of concrete to site of laying, curing, carriage
for all leads; but excluding the cost of centering, shuttering, finishing and
5.33 reinforcement as per direction of the engineer-in-charge, for the following grades of
Note: Extra cement up to 10% of the minimum specified cement content
in design mix shall be payable separately. In case the cement content in
design mix is more than 110% of the specified minimum cement content,
the contractor shall have discretion to either re-design the mix or bear the
cost of extra cement.
All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum
Concrete of M30 grade with minimum cement content of 350 kg /cum
All works above plinth level upto floor V level
5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 143.72 9,860.40 14,17,136.69
5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum cum 26.25 10,011.35 2,62,797.94
Add for using extra cement in the items of design mix over and above the specified
5.35 cement content therein. quintal 93.52 733.50 68,596.92
Brick work with common burnt clay F.P.S. (non modular) bricks of class
6.1 designation 7.5 in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 29.25 7,132.25 2,08,618.31
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Brick work with common burnt clay F.P.S. (non modular) bricks of class
6.4 designation 7.5 in superstructure above plinth level up to floor V level in
all shapes and sizes in:
Cement mortar 1:6 (1 cement: 6 coarse sand)
Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry
100 mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650
kg/cum conforming to 1S:2185 (Part 3) in super structure above plinth
level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ).
The rate includes providing and placing in position 2 Nos 6 mm dia M.S.
bars at every third course of masonry work.
Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry
with 150 mm to 300 mm thick with Grade-1 AAC blocks of density 551 to
650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth
6.47 level up to floor V level with RCC band at sill level and lintel level with cum 271.95 8,333.65 22,66,336.12
approved block laying polymer modified adhesive mortar all complete
as per direction of Engineer-in-Charge. (The payment of RCC band and
reinforcement shall be made for seperately).
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S.
6.44 (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 Mtr 124.95 59.45 7,428.28
cement : 4 fine sand).
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and
similar locations of required size, approved shade, colour and texture laid over 20 mm
8.2 thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white
cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing,moulding and polishing of edges to give high gloss finish etc. complete at all levels.
8.2.3 Granite stone slab of all colour and texture except black, Cherry/Ruby red
Area of slab over 0.50 sqm
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including
machine polishing to edge to give high gloss finish etc. complete as per design approved
by Engineer-in-Charge.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Extra for providing opening of required size & shape for wash basin/ kitchen sink in
kitchen platform, vanity counter and similar location in marble/ Granite/ stone work,
including necessary holes for pillar taps etc. including moulding, rubbing and polishing of
cut edges etc. complete.
Providing wood work in frames of doors, windows, clerestory windows
and other frames, wrought framed and fixed in position with hold fast lugs
9.1 or with dash fasteners of required dia & length (hold fast lugs or dash
fastener shall be paid for separately).
9.1.1 Second class teak wood cum 0.21 1,42,949.70 30,019.44
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4
9.12 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass sqm 3.02 176.40 532.73
panes excluding portion inside rebate shall be measured).
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |!) non-
decorative type, core of block board construction with frame of 1st class hard wood and
well matched commercial 3 ply veneering with vertical grains or cross bands and face
veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all
9.23 edges of flush door shutters (over all area of door shutter to be measured). sqm 6.94 462.35 3208.71
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm
diameter bolts, nuts and wooden plugs and embedding in cement concrete block
30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm
Providing and fixing aluminium extruded section body tubular type universal hydraulic door
closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36
9.84 Kg. to 80 Kg. and door width from 701 mm to 1000 mm), with double speed adjustment Each 23.00 983.15 22,612.45
with necessary accessories and screws etc. complete.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Providing and fixing aluminium sliding door bolts, ISI marked anodised
(anodic coating not less than grade AC 10 as per IS : 1868), transparent
9.96 or dyed to required colour or shade, with nuts and screws etc. complete :
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed
9.97 to required colour or shade, with necessary screws etc. complete :
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
9.100 to required colour or shade, with necessary screws etc. complete :
Providing and fixing bright finished brass 100 mm mortice latch and lock,
ISI marked, with six levers and a pair of anodised (anodic coating not less
9.103 than grade AC 10 as per IS : 1868) aluminium lever handles of approved Each 23.00 868.95 19,985.85
quality with necessary screws etc. complete.
Providing and fixing aluminium hanging floor door stopper, ISI marked,
anodised (anodic coating not less than grade AC 10 as per IS : 1868)
9.101 transparent or dyed to required colour and shade, with necessary screws
twin rubber stopper
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall
thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners
and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the
vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge,
9.119 EPDM rubber gasket weather seal to be provided through out the frame. The door frame
to be fixed to the wall using M.S. screws of 65/100 mm size,
complete as per manufacturer’s specification and direction of Engineer-in-Charge.
Providing and fixing factory made panel PVC door shutter consisting of frame made out of
M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm
for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and
manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size
30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be
tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC
sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the
inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm
shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and
9.120 lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide
cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm
thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles &
rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and
joined together with solvent cement dhesive. An additional 5 mm thick PVC strip of 20
mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent
adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s
specification & drawing.
9.120.1 30 mm thick plain PVC door shutters sqm 15.42 3,182.95 49,081.09
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of
cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to
receive shutter of 30 mm thickness. The laminate shall be moulded with
fire resistant grade unsaturated polyester resin and chopped mat. Door
9.121 frame laminate shall be 2 mm thick and shall be filled with suitable wooden metre 16.39 570.95 9,357.87
block in all the three legs. The frame shall be covered with fiber glass from
all sides. M.S. stay shall be provided at the bottom to steady the frame.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
9.122 Providing and fixing to existing door frames.
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and
wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm
thick FRP laminate all around, with suitable wooden blocks inside at required places for
fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used
9.122.2 as filler material throughout the hollow panel, casted monolithically with testing sqm 6.07 4,488.95 27,247.93
parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per
direction of Engineer-in-charge.
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss
/ matt / suede finish with high density protective surface layer and reverse side of
adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of
approved quality.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed
10.2 work, including cutting, hoisting, fixing in position and applying a priming coat of approved Kg. 1815.86 133.70 2,42,780.48
steel primer all complete:
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc.,
including cutting, hoisting, fixing in position and applying a priming coat of approved steel
primer, including welding and bolted with special shaped washers etc. complete.
Hot finished seamless type tubes
Providing and fixing M.S. fan clamp type | or Il of 16 mm dia M.S. bar, bent to shape with
10.17 hooked ends in R.C.C. slabs or beams during laying, including painting the exposed each 11.00 226.00 2,486.00
portion of loop,
Providing all ascircular’
and fixing per standard designcast
Hexagonal complete.
iron or M.S. sheet box for ceiling fan clamp,
10.18 of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top each 11.00 220.65 2,427.15
Providing for proper
and fixing mild bonding, top lid
steel round shall be
holding screwed
down bolts into
withthe castand
nuts iron/ M.S. sheet
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in
10.25 position and applying a priming coat of approved steel primer using structural steel etc. as
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of
10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head,
comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame ,
concrete/ masonry, etc. as per direction of Engineer-in-charge.
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,
plates etc., including welding, grinding, buffing, polishing and making curvature (wherever
required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c
fixing the railing with necessary accessories & stainless steel dash fasteners , stainless
steel bolts etc., of required size, on the top of the floor or the side of waist slab with
10.28 suitable arrangement as per approval of Engineer-incharge, (for payment purpose only kg 366.45 772.40 2,83,045.98
weight of stainless steel members shall be considered excluding fixing accessories such
as nuts, bolts, fasteners etc.).
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S.
Flat 15x3 mm and nuts & bolts complete.
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm
thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement
11.5 hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening Sqm 358.05 1,056.15 3,78,154.51
compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications.
This includes cost of cement slurry, but excluding the cost of nosing of steps etc.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1
11.6 cement : 3 coarse sand), finished with a floating coat of neat cement.
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey
cement slurry mixed with pigment to match the shade of the slab, including rubbing and
11.26 polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : sqm 415.93 1,948.25 8,10,335.62
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm
(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey
11.27 cement slurry mixed with pigment to match the shade of the slabs, including rubbing and sqm 20.71 2,354.70 48,765.84
polishing complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS: 15622, of approved make, in all colours and shades,
laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing
with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with
white cement and matching pigments etc., complete.
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of
approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement
mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm
11.41A including grouting the joints with white cement and matching pigments etc. The tiles must
be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the
notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet
for placing the tiles gently and easily.
11.41A.1 Double charge vitrified tile polished finish of size
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Providing and laying Vitrified tiles in different sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to |.S. 15622, of
approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of
cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/
11.46 sqm including grouting the joint with white cement & matching pigments etc.
Providing and laying Polished Granite stone flooring in required design and patterns, in
linear as well as curvilinear portions of the building all complete as per the architectural
drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar
11.56 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including rubbing , curing and
polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone
12.21 aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : metre 132.55 305.15 40,447.63
3 fine sand) as per standard design : In 75x75mm deep chase
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over
P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement :
12.22 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing each 13.00 298.25 3,877.25
the outlet complete.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Providing and fixing false ceiling at all height including providing and fixing of frame work
made of special sections, power pressed from M.S. sheets and galvanized with zinc
coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle
cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia
x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of
25x10x0.50 mm of required length with nuts & bolts of required size and other end of
angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing
of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of
80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to
centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with
12.45 connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction,
including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm
and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs
at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of
gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,
including jointing and finishing to a flush finish of tapered and square edges of the board
with recommended jointing compound , jointing tapes , finishing with jointing compound in
3 layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and also including the
cost of making openings for light fittings, grills,diffusers, cutouts made with frame of
perimeter channels suitably fixed, all complete as per drawings, specification and direction
12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board Sqm 23.10 1,529.10 35,322.21
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-
7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns.
Sheet should have protective guard film of 25 microns minimum to avoid scratches during
transportation and should be supplied in single length upto 12 metre or as desired by
Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size
(5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins, rafters and trusses
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05
%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-
12.51 18 microns using self drilling/ self tapping screws complete :
12.51.6 Gutter (600 mm over all girth) Sqm 48.30 1,313.70 63,451.71
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true
horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel
sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T"
runner with suitably spaced joints to get required length and of size 24x38 mm made from
0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of
size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between
main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross
"T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be
interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall
angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid
12.52 including, required cutting/making, opening for services like diffusers, grills, light fittings,
fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI
slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm
long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size
85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed
width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for
all heights as per specifications, drawings and as directed by
Engineer-in-charge.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595
mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100
gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and
having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder
coated of thickness 60 microns (minimum), including factory painted after bending and
perforation and backed with a black Glass fiber
acoustical fleece.
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium
silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level,
suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising
@ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at
joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum)
sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of
0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to
centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size
24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the
1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls
/partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of
0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre
with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified
edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/
making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors
etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted
cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash
fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8
mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of
all Tsections shall be pre-painted with polyster baked paint, for all heights, as per
specifications, drawings and as directed by Engineer-in-Charge.
12 mm cement plaster on brickwork with cement mortar of mix (upto 10 m height from
13.1.2 1:6 (1 cement: 6 fine sand) (Not less than in 1.25 FM) Sqm 1592.85 333.35 5,30,976.55
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
18 mm cement plaster in two coats under layer 12 mm thick cement plaster
13.11 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement Sqm 465.60 518.55 2,41,436.88
plaster 1:6 (1 cement : 6 fine sand).
6 mm cement plaster on ceiling including chipping of CC/ RCC surface before plastering
13.17 in cement mortar of mix 1:3 (1 cement : 3 fine sand ) (Not less than in 1.25 FM) Sqm. 702.45 396.65 2,78,626.79
Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted)
having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal
13.48A resistance, dirt resistance exterior paint of required shade with silicon additives.
New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming
coat of exterior primer applied @ 0.90 litre/10 sqm.
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile
Organic Compound ) content less than 50 grams/ litre of approved brand and
manufacture, including applying additional coats wherever required to achieve even shade
Providing and applying white cement based putty of average thickness 1 mm, of approved
13.80 brand and manufacturer, over the plastered wall surface to prepare the surface even and sqm 1488.90 156.05 2,32,342.85
smooth complete.
13.114 Melamine polishing on wood work (one or more coat). sqm 134.40 138.10 18,560.64
ALUMINIUM WORK:
Providing and fixing aluminium work for doors, windows, ventilators and partitions with
extruded built up standard tubular sections/ appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required
dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and
sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be
21 smooth, rust free, straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-
charge. (Glazing, paneling and dash fasteners to be paid for separately) :
21.1.1 For fixed portion
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Anodised aluminium (anodised transparent or dyed to required shade according to IS:
21.1.1.1 1868, Minimum anodic coating of grade AC 15) kg 1274.54 495.05 6,30,961.03
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots
21.1.2 and making provision for fixing of fittings wherever required including the cost of
EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Anodised aluminium (anodised transparent or dyed to required shade according to IS:
21.1.2.1 1868, Minimum anodic coating of grade AC 15) kg 648.72 598.60 3,88,323.79
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions
etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings
21.3 and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid
in basic item):
With float glass panes of 5.5 mm thickness (weight not less than 12.50 kg/ sqm)
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by
21.8 providing weather silicon sealant over backer rod of approved quality as per architectural
drawings and direction of Engineer-in-charge
Upto 5 mm depth and 5 mm width
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of
21.11 approved quality with necessary stainless steel screws etc. to the side hung windows as
per direction of Engineer-in-charge complete.
Providing and fixing aluminium casement windows fastener of required length for
21.15 aluminium windows with necessary screws etc. complete.
Anodized (AC 15) aluminium
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required
shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved
design/pattern, with approved standard section and fixed to the existing window frame
with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the
grill to proper opening size for fixing and operation of handles and fixing approved
anodised aluminium standard section around the opening, all complete as per
requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
WATER PROOFING:
Providing and laying water proofing treatment to vertical and horizontal surfaces of
depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing
compound conforming to IS 2645 in recommended proportions including rounding off
junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water
proofing compound in recommended proportion including rounding off junction of vertical
and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should
be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
Providing and laying integral cement based water proofing treatment including preparation
of surface as required for treatment of roofs, balconies, terraces etc consisting of following
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water
proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the
RCC slab including adjoining walls upto 300 mm height including cleaning the surface
before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size
22.7 with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick
layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope
and treating similarly the
adjoining walls upto 300 mm height including rounding of junctions
of walls and slabs.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/
sqm of cement admixed with water proofing compound conforming to IS : 2645 and
approved by Engineerin- charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4
coarse sand) admixed with water proofing compound conforming to IS : 2645 and
approved by Engineerin- charge including laying glass fibre cloth of approved quality in
top layer of plaster and finally finishing the surface with trowel
with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two
weeks for curing and for final test. All above operations to be done in order
With average thickness of 120mm and minimum thickness at khurra as 65 mm.
STRUCTURAL GLAZING:
Providing and supplying aluminium extruded tubular and other aluminium sections as per
the architectural drawings and approved shop drawings , the aluminium quality as per
grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80
microns conforming to AAMA 2604 of required colour and shade as approved by the
25.1 Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws kg 1058.40 414.30 4,38,495.12
etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be
paid on this account). The weight of aluminium extruded section shall be taken for
purpose of payment.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Designing, fabricating, testing, protection, installing and fixing in position semi (grid)
unitized system of structural glazing (with open joints) for linear as well as curvilinear
portions of the building for all heights and all levels, including:
(a) Structural analysis & design and preparation of shop drawings for the specified design
loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times
design wind pressure without any failure), including functional design of the aluminum
sections for fixing glazing panels of various thicknesses, aluminium
cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,
structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,
microwave cured EPDM gaskets for water tightness, pressure equalisation &
drainage and protection against fire hazard including:
b.) Fabricating and supplying serrated M.S. hot dip galvanised /Aluminium alloy of 6005
T5 brackets of required sizes, sectionsand profiles etc. to accommodate 3 Dimentional
25.2 achieving perfect verticality and fixing structural glazing systemrigidly to the RCC/ Sqm 70.56 3,510.50 2,47,700.88
masonry/structural steel framework of buildingstructure using stainless steel anchor
fasteners/ bolts, nylonseperator to prevent bimetallic contacts with nuts and washersetc.
of stainless steel grade 316, of the required capacity and in
required numbers.
c.) Providing and filling, two part pump filled, structural silicone sealant and one part
weather silicone sealant compatible withthe structural silicone sealant of required bite size
in a cleanand controlled factory / work shop environment, including doublesided spacer
tape, setting blocks and backer rod, all of approved
grade, brand and manufacture, as per the approved sealantdesign, within and all around
the perimeter for holding glass.(d) Providing and fixing in position flashings of solid
aluminium sheet1 mm thick and of sizes, shapes and profiles, as required as perthe site
conditions, to seal the gap between the building structureand all its interfaces with curtain
glazing to make it watertight.(e) Making provision for drainage of moisture/ water that
enters thecurtain glazing system to make it watertight, by incorporating principles of
pressure equalization, providing suitable gutter profilesat bottom (if required), making
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Providing, assembling and supplying vision glass panels (IGUs) comprising
of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of
size and shape as required and specified, comprising of an outer heat strengthened float
glass 6mm thick, of approved colour and shade with reflective soft coating on
surface # 2 of approved colour and shade, an inner Heat strengthened clear float glass
6mm thick, spacer tube 12mm wide, dessicants, including primary seal and
secondary seal (structural silicone sealant) etc. all complete for the required
performances, as per the Architectural drawings, as per the approved shop drawings, as
specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled
in the factory/ workshop of the glass processor.
(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.
For payment, only the actual area of glass on face # 1 of the glass panels (excluding the
areas of the grooves and weather silicone sealant) provided and fixed in position, shall be
measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2,
+ 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having
properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to
15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value
of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be
decided by technical sanctioning authority as per the site requirement.
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the openable panels as
specified and of the approved make such as heavy duty stainless steel friction hinges, min
4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including
25.4 necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete Sqm 10.58 3,671.50 38,844.47
as per the Architectural drawings, as per the approved shop drawings, as specified and
as directed by the Engineer- in-Charge.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Providing, fabricating and supplying shadow box of required size and shape,
for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear
portions of the building by providing semi -rigid, inorganic, non- combustible fibre glass
wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation
layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer),
25.5 of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not Sqm 17.64 2,159.65 38,096.23
less than 60 gm / sqm, made of randomly oriented glass fibres distributed in a binder by a
wet- lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm
thick cement board including SS rivets, nuts, bolts, washers etc complete.
TOTAL OF SCHEDULE ITEM 262,27,736.81
NON-SCHEDULE ITEM
Providing and applying surface Stone textured finish with 100% natural granite & ceramic
protection coating of approved shade or approved equivalent make) comprising of water-
borne, penetrating, water repellent EM- primer & super durable water based acrylic silicon
resin clear and super durable dirt and dust resistant protection coat of FSI Clear coat,
which shall be highly water repellant, Anti-algae & anti-fungal in nature to external wall
surfaces. The coating shall also cover hairline cracks with application method which
includes one coat of El primer, one coat of Stoney, all in approved colour and texture. It
shall also include preparation of surface, appropriate primer coat etc. applied as per
manufacturer's & project consultant instructions. Scaffolding and staging shall be allowed
as required. The finish shall be in natural colour/ non pigmented, water repellant, resistant
to ultra violet, alkali and condensate formation . All hairline cracks/ crazing shall be
covered & shall ensure good breathability for the substrate. Finished work would be to
the satisfaction of the Engineer in charge.
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Supply & Fixng of 7mm thick synthetic sports surface, it consists of a wear layer not less
than 1 mm thick, with a fiberglass grid for sound stability on the floor. Surface treated with
PUR (Polyurethane treatment for fungistatic and bacteriostatic properties. Weight not less
than 4.35 kg per sqm, Sheet width 1.8 mts, joined with seamless hot welding. Floorings
were laid with adhesive as per the manufacturer’s instruction over the existing levelled
MR-2 Technical Specifications SQM 375.29 4,604.00 17,27,835.16
Shock absorption under EN 14808 standard not less than 16%
Ball bounce under EN 12235 standards not less than 95%
Abrasion resistance as per EN ISO 5470-1 shall be passed
Sound Impact shall be > 20-22 dB
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Supply and Installation of FIBA, WSF, IHF, BWF Approved 100% solid hardwood pre
finished Maple or Beech wooden sports flooring as per specifications and conditions
mentioned below:
Technical Specification:
Prefinished Hardwood flooring 22mm thick each individual strip. Minimum width of 129mm
and 1830mm in length jointed together with the help of tongue and groove on all four
sides of all board.
Substructure of solid wood flooring shall consist of sleeper of Spruce or Pine having 63
mm wide and cross section of 38 mm and laid perpendicular to the main flooring planks at
a spacing 487.5mm centre to centre including 19 mm thick pads at 305mm centre to
centre spacing and polyethylene membrane installed over the concrete base beneath the
flooring system as a vapour barrier between the concrete and wood floor.
MR-3 Vapour Barrier: SQM 375.29 13,904.00 52,18,032.16
.20mm polyethylene membrane installed over the concrete base beneath the flooring
system as a vapour barrier between the concrete and wood floor.
Solid Hardwood floor board should be prefinished to eliminate the risk of human error
when sanding and lacquering on site and easy and fast installation.
Solid hardwood floor should be long life and low maintenance cost.
Solid hardwood floor should be approved by following Federations:
FIBA (Federation International Basketball Association).
BWF (Badminton World Federation).
WSF (World Squash Federation)
IHF ( International Handball Federation)
Rubber Skirting:
Factory supplied 75mm x 100mm rubber base molding to include air channelling in back
MR-4 of base to provide full ventilation of the sub-floor system. Fixed to the wall with a base Rmt 77.70 2,338.00 1,81,662.60
molding adhesive as recommend by manufacturer
Badminton Post - Movable Badminton Poles Made from 40X40X5mm steel square tube
with 50kg. of dead weight. Roller wheels to be provided for facilitating easy transport and
MR-5 storage. Post provided with mechanical Winch to support and tighten heavy net. Net Pair 2.00 70,714.60 1,41,429.20
Digitally signed by ARTI
NBCC (INDIA) LTD
SUB: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
Table Tennis :- Providing & fixing Table tennis of size 2740mm x 1525mm x 760mm made
of 25mm pre-laminated top fixed on 50mm x 25mm GI powder coated frame. wheel Size
100 MM. two wheels with lock and six free moving wheels
TOURNAMENT CARROM BOARD
1. Size : 35 x 35 x 20 mm, 2. Border Size : 3 x 2 inch. 3. Playing Area : 29 x 29 inch. 4.
MR-7 Stand : MS Easy Fold Stand, 5. Coins : Wooden, 6. Indian Ply Nos 2.00 38,603.40 77,206.80
TOTAL OF NON-SCHEDULE ITEM 89,40,770.20
Digitally signed by ARTI
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”CAMPUS DATIA, MADHYA PRADESH
ABSTRACT (PLUMBING ITEMS)- SPORTS COMPLEX
S.NO DESCRIPTION DSR-2023/AMOUNT NON SCHEDULED AMOUNT
1 SANITARY FIXTURE 142879.45 66539.95
2 SOIL ,WASTE & VENT PIPES AND FITTINGS 117938.78 3158.75
3 WATER SUPPLY 131479.10 88839.79
4 RAIN WATER PIPING WORK 50184.07 0.00
5 SEWERAGE & DRAINAGE 387963.20 0.00
6 EARTH WORK 81912.71 0.00
TOTAL AMOUNT 912357.31 158538.48
TOTAL AMOUNT 912357.31 158538.48
GRAND TOTAL 10,70,895.79
GRAND TOTAL 10,70,895.79
Digitally signed by ARTI
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at RLBCAU at
ESTIMATE (PLUMBING ITEMS)- SPORTS COMPLEX
DSR -2023 DSR-2023 AMOUNT
DESCRIPTION OF ITEM UNIT QUANTITY
/NS ITEM No. RATE (RS.) (RS.)
SANITARY FIXTURE
17.2 Providing and fixing white vitreous china pedestal type water closet (European
type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,
including flush pipe, with manually controlled device (handle lever), conforming
to IS : 7231, with all fittings and fixtures complete, including cutting and making
good the walls and floors wherever required.
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 4 6515.55 26062.20
17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with
automatic flushing cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including painting of fittings and brackets,
cutting and making good the walls and floors wherever required
17.4.2 Range of two urinal basin with 5 litre white P.V.C. automatic flushing cistern
17.4.3 Range of three urinal basin with 10 litre white P.V.C. automatic flushing cistern
8.10 Providing and fixing stone slab with table rubbed, edges rounded and polished, of
size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase
of appropriate width with chase cutter and embedding the stone in the chase
with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge
and finished smooth.
8.10.2 Granite Stone of approved shade Each 4 4051.85 16207.40
Digitally signed by ARTI
17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and
brackets, cutting and making good the wallswherever require:
17.7.2 White Vitreous China Wash basin size 630x450 mm with
a single 15 mm C.P. brass pillar taps
17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983
with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and
brackets, cutting and making good the walls wherever required :
17.10.1 Kitchen sink with drain board
17.22A Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make and as per the direction of Engineerin-
17.22 B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make
as approved by Engineer in charge.
a) 15 mm nominal dia Each 4 6940.75 27763.00
17.31 Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
17.34 Providing and fixing toilet paper holder :
18.21 Providing and fixing uplasticised PVC connection pipe with brass
18.21.1 30cm length
18.21.1.1 15mm nominal bore Each 12 85.00 1020.00
18.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
Digitally signed by ARTI
18.49.1 15mm nominal bore Each 1 506.80 506.80
18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931
18.53.1 15mm nominal bore Each 12 574.30 6891.60
18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of
approved make and quality as per direction of Engineer-in-charge.
SUB TOTAL( SANITARY FIXTURE) 142879.45
NS-1 Providing and fixing C.P. brass 2 Way bib cock & Health Faucet ABS with Rubbit
Cleaning System 1.25 m Long SS Flexible Tube & ABS Wall Hook as per direction Each 4 3452.35 13809.38
of Engineer-in-charge.-
NS-2 Providing and fixing single lever sink mixer (wall mounted) complete in all respect
NS-3 Providing and fixing ss waste coupling 32 mm dia complete in all respect Each 6 363.90 2183.38
NS-4 Providing and fixing soap tumbler holder (brass) complete in all respect Each 3 867.75 2603.26
NS-5 Providing and fixing ss towel rod complete in all respect Each 4 1026.37 4105.49
NS-6 Providing and fixing Stainless steel grating with frame for floor traps or drains of
required pattern complete in all respect
NS-7 Providing and fixing Flash touch-free infrared hand dryer with 1150W rated
power & carbon brush motor ,material: 304 stainless steel, Each 2 10955.13 21910.26
finish: stainless steel complete in all respect
SUB TOTAL( NS-SANITARY FIXTURE) 66539.95
SOIL ,WASTE & VENT PIPES AND FITTINGS
17.35 Providing and fixing soil, waste and vent pipes :
17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
17.35.2.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
17.38 Providing and fixing bend of required degree with access door, insertion rubber
washer 3 mm thick, bolts and nuts complete.
Digitally signed by ARTI
17.38.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
17.39 Providing and fixing plain bend of required degree
17.39.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
17.39.2.3 Hubless centrifugally cast (spun) iron pipesepoxy coated inside & outside
17.57A Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe
17.57A.1 100 mm dia
17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket Each 26 432.05 11060.48
17.57A.2 75mm dia
17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket Each 2 389.05 778.10
17.60 Providing and fixing trap of self cleansing design with screwed down or hinged
grating with or without vent arm complete, including cost of cutting and making
good the walls and floors :
17.60.1 a) 100 mm inlet and 100 mm outlet
17.60.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
17.60.2 b) 100 mm inlet and 75 mm outlet
17.60.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
17.61 Cutting chases in brick masonry walls for following diameter sand cast iron/
centrifugally cast (spun) iron pipes and making good the same with cement
concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm
nominal size), including necessary plaster and pointing in cement mortar 1:4 (1
cement : 4 coarse sand) :
SUB TOTAL( SOIL, WASTE & VENT PIPES) 117938.78
Digitally signed by ARTI
NS-8 Providing and fixing End plug/cap complete in all respect Each 4 165.15 660.61
NS-9 Providing and fixing uPVC SCH-80 pipe for waste, wash basin/urinal to floor trap
with fittings complete in all respect
SUB TOTAL NON SCHEDULED ( SOIL, WASTE & VENT PIPES) 3158.75
18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and testing of joints complete
as per direction of Engineer in Charge.
Internal work - Exposed on wall
18.7.2 20 mm nominal outer dia Pipes Mtr 5 335.00 1675.00
18.7.3 25 mm nominal outer dia Pipes Mtr 9 401.55 3613.95
18.7.4 32 mm nominal outer dia Pipes Mtr 8 518.75 4150.00
18.7.5 40 mm nominal outer dia Pipes Mtr 14 702.95 9841.30
18.7.6 50 mm nominal outer dia Pipes Mtr 7 934.15 6539.05
18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m
spacing. This includes jointing of pipes & fittings with onestep CPVC solvent
cement and the cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
18.8.1 15 mm nominal outer dia Pipes Mtr 9 497.80 4480.20
18.8.2 20 mm nominal outer dia Pipes Mtr 20 537.60 10752.00
18.8.3 25 mm nominal outer dia Pipes Mtr 14 627.25 8781.50
18.8.4 32 mm nominal outer dia Pipes Mtr 10 739.30 7393.00
18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting
and making good the walls etc.
Digitally signed by ARTI
Internal work-Exposed on wall
18.10.4 32 mm dia nominal bore Mtr 16 667.00 10672.00
18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and
18.12.4 32 mm dia nominal bore Mtr 50 540.30 27015.00
18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by
providing and fixing tee, including cutting and threading the pipe etc. complete :
18.13.1 25 to 40 mm nominal bore Each 2 911.90 1823.80
18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :
18.17.1 25mm nominal bore Each 2 622.40 1244.80
18.17.1 A 20 mm nominal bore Each 1 539.95 539.95
18.17.2 32mm nominal bore Each 1 689.60 689.60
18.17.3 40mm nominal bore Each 1 826.10 826.10
18.17.4 50mm nominal bore Each 1 1026.65 1026.65
18.19 Providing and fixing gun metal non- return valve of approved quality
(screwed end) :
18.19.1 25 mm nominal bore
18.19.1.1 Horizontal Each 1 591.40 591.40
18.19.3 40 mm nominal bore
18.19.3.1 Horizontal Each 1 952.60 952.60
18.19.4 50 mm nominal bore
18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage
tank, IS : 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the
base support for tank
SUB TOTAL( WATER SUPPLY) 131479.10
NON SCHEDULED ( WATER SUPPLY )
Digitally signed by ARTI
NS-10 Providing & Fixing Stainless Steel Water Cooler Size L ,Number of faucets-
2,Cooling Capacity - 40 L/h ,Storage capacity-80 L ,Refrigerant - R-134a eco
friendly (Non CFC) USP- #High-quality stainless steel tank and components for safe
drinking water # Reliable reciprocating compressor for longer product life
#Accessories: Water inlet hosepipe and overflow pipes provided with the unit
#Specially designed float valves made of food-grade plastic #Adjustable pedestals
made of highly non-corrosive and strong material With Water Purifier Kent RO 25
ltr/hour tank capacity 6 ltr
NS-11 Providing and fixing Geyser, 5-Star energy rating, voltage / Frequency
230V/5Hz,temperature range 25C to 75C,working pressure (Mpa) 0.8 ,complete in
A Volume 25 ltr Each 2 10349.57 20699.14
B Volume 06 ltrs Each 1 7872.28 7872.28
SUB TOTAL NON SCHEDULED ( WATER SUPPLY) 88839.79
RAIN WATER PIPING
12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron
grating 15 cm diameter and weighing not less than 440 grams. Each 8 54.70 437.60
12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal Expansion,(i) Single socketed pipes.
12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories
for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for
thermal expansion.
12.42.1 Coupler
12.42.2 Single push fit Coupler
Digitally signed by ARTI
12.42.3 Single tee with door
12.42.6 Shoe (Plain)
12.43 Providing and fixing unplastisized PVC pipe clip approved design to unplastisized
PVC rain water pipes by meanes of 50x50x50 mm hard wood plugs,screwed with
M.S screws of required length,including cutting brick and fixing in cement morter
1:4(1 cement:4 coarse sand) and making good the wall etc complete.
SUB TOTAL( RAIN WATER PIPING) 50184.07
SEWERAGE & DRAINAGE
Providing,laying and jointing glazed stoneware pipes class SP-1 with stiff mixture
19.1 of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing
of joints etc. complete :
19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse
sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes
including bed concrete as per standard design :
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded
19.3 stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed
concrete as per standard design :
19.3.2 150 mm diameter S.W. pipe Mtr 80 743.10 59448.00
19.3.3 200 mm diameter S.W. pipe Mtr 6 873.50 5241.00
Digitally signed by ARTI
19.4 Providing and fixing square-mouth S.W. gully trap class SP-1
complete with C.I. grating brick masonry chamber with water tight
C.I. cover with frame of 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per
standard design:
19.4.1 100x100mm size 'P' type
19.4.1.1 With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars
jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2
fine sand) including testing of joints etc. complete :
19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1
cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size), inside plastering 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement
and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) finished with a floating coat of neat
cement complete as per standard design :
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. coverwith frame (light duty)
455x610 mm internal dimensions,total weight of cover and frame to be not less
than 38 kg(weight of cover 23 kg and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 5 12770.55 63852.75
19.8 Extra for depth for manholes :
19.8.1 Size 90x80 cm
19.8.1.1 With common burnt clay F .P .S. (non modular) Mtr 1 8825.40 8825.40
Digitally signed by ARTI
19.9 Constructing brick masonry circular type manhole 0.91 m internaldia at bottom
and 0.56m dia at top in cement mortar 1:4 (1 cement: 4 coarse sand), inside
cement plaster 12 mm thick with cementmortar 1:3 (1 cement : 3 coarse sand)
finished with a floating coatof neat cement, foundation concrete 1:3:6 mix (1
cement : 3 coarsesand : 6 graded stone aggregate 40 mm nominal size), and
makingnecessary channel in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4
graded stone aggregate 20 mm nominal size) finishedwith a floating coat of neat
cement, all complete as per standard
19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty,
HD-20 grade designation) 560 mm internal diameter conforming
to I.S. 12592, total weight of cover and frame to be
not less than 182 kg., fixed in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including centering, shuttering all complete.
(Excavation, foot rests and 12mm thick cement plaster at
the external surface shall be paid for separately) :
19.9.1.1 With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
19.16 Providing orange colour safety foot rest of minimum 6 mm thickplastic
encapsulated as per IS : 10910, on 12 mm dia steel barconforming to IS: 1786,
having minimum cross section as 23 mmx25mm and over all minimum length 263
mm and width as 165 mm with minimum 112 mm space between protruded legs
having 2 mm treadon top surface by ribbing or chequering besides necessary and
adequate anchoring projections on tail length on 138 mm as per standard drawing Each 19 553.70 10520.30
and suitable to with stand the bend test and chemical resistance test as per
specifications and having manufacture's permanent identification mark to be
visible even after fixing, including fixing in manholes with 30x20x15 cm cement
concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size) complete as per design.
Digitally signed by ARTI
19.21 Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with cementconcrete
1:2:4 mix (1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal
size) cement plastered on both sideswith cement mortar 1:3 (1 cement : 3 coarse
sand), finished with afloating coat of neat cement and making necessary channels
forthe drain etc. complete :
19.21.1 For pipes 100 to 250 mm diameter Each 1 810.45 810.45
Providing sand cast iron drop connection externally for 60 cm drop
from branch sewer line to main sewer manhole including inspectionand cleaning
eye with chain and lid, sand cast iron drop pipe andbend encased all-round with
cement concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40
mm nominal size) withall centering and shuttering required, cutting holes in walls
19.22 andmaking good with brick work in cement mortar 1:4 (1 cement : 4coarse sand)
plastered with cement mortar 1:3 (1 cement : 3coarse sand) on inside of the
manhole wall, lead caulked jointsbetween sand cast iron pipes and fittings, stiff
cement mortar 1:1(1 cement : 1 fine sand) joints between sand cast iron tee
andS.W. pipe, making required channels complete as per standarddesign and
specifications :
19.22.2 150 mm dia sand cast iron drop connection Each 1 16577.80 16577.80
19.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in
cement mortar 1:4 (1 cement : 4 coarse sand) including
500x450 mm pre-cast R.C.C. horizontal grating with frame complete
as per standard design :
19.27.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Each 9 5957.90 53621.10
SUB TOTAL( SEWERAGE & DRAINAGE) 387963.20
Digitally signed by ARTI
2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual
means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on
plan) including getting out and disposal of excavated earth lead upto 50 m and lift
upto 1.5 m, as directed by Engineer-in-charge.
2.6.1 All kind of soil Cum 21 177.50 3767.97
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20cm in depth, consolidating each
deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
2.10 Excavating trenches of required width for pipes, cables, etc including excavation
for sockets, and dressing of sides, ramming of bottoms,depth upto 1.5 m,
including getting out the excavated soil, and thenreturning the soil as required, in
layers not exceeding 20 cm in depth,including consolidating each deposited layer
by ramming, watering,etc. and disposing of surplus excavated soil as directed,
within a leadof 50 m :
2.10.1 All kinds of soil
2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Mtr 216 352.15 76064.40
SUB TOTAL( EARTH WORK) 81912.71
Digitally signed by ARTI
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science
and college of Fisheries at RLBCAU at Datia.”
ABSTRACT (FIRE-FIGHTING ITEMS)- SPORTS COMPLEX
ESTIMATED COST AS PER DSR - NON-SCHEDULED
S.NO. DESCRIPTION (FIRE FIGHTING)
2022 E&M (RS.) AMOUNT (RS.)
FIRE EXTINGUISHERS 0.00 85145.41
TOTAL 85,145.41
Digitally signed by ARTI
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at RLBCAU
NSI DESCRIPTION OF ITEM UNIT QTY NS RATE (RS.) NS AMOUNT (RS.)
FIRE EXTINGUISHERS
Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new seamless cylinder, as per IS:
NS-1 7285 and CCE approval, fitted with Discharge hose and horn and wheel type valve with initial Nos. 3 9865.12 29,595.37
Charge as per IS: 15683:2018 specification, bearing ISI Mark .
ABC Stored Pressure type Fire Extinguisher 6 Kgs. capacity bearing ISI Mark for Fighting ABC Class
of Fire. The Extinguisher will be Manufactured Strictly as per BIS: 15683:2018 bearing ISI. mark.
MAP 40% a) In built NRV
NS-2 on valve to cross check internal pressure. Nos. 3 3993.03 11,979.08
b) Operating temperature marking on valve.
c) Automatic safety release valve.
d) Non Returnable Valve
Water Stored Pressure type Fire Extinguisher, 9 Litre’s capacity Fire Extinguishers.The
Extinguisher will be Manufactured Strictly as per BIS: 15683:2018 bearing ISI. mark.
'5 Kg Ceiling Mounted Fire Extinguisher Clean Agent HFC, Zero ODP, Stored PressureType,
Pressure Gauge, Gross Weight 7.7 Kg, empty Weight 2.7 Kg, Can Height 267MM, Diameter
230MM, Discharge Time less than 8 Secs, Auto discharge mechanism on temperature rise,
applicable on Class A,B,C and electrically started Fire, Can Construction : Valve Construction :
Forging & Machining, Internal Coating of Can : Epoxy Powder coating, Sheet metal thickness :
1.60 MM For HUB & ISP Rooms
Total 85,145.41
Digitally signed by ARTI
NBCC INDIA LIMITED
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal
Science and college of Fisheries at RLBCAU at Datia.”
GENERAL ABSTRACT OF COST
COST AS PER DSR COST AS PER
S.NO. DESCRIPTION TOTAL (RS.)
2023 (RS.) MARKET RATE (RS.)
1.0 CIVIL WORK MAIN BUILDING 39,19,577.47 0.00 39,19,577.47
2.0 INTERNAL PLUMBING WORKS 69,261.60 0.00 69,261.60
Digitally signed by ARTI
NBCC (INDIA) LTD
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
DSR 2023 DSR 2023
DESCRIPTION Unit Quantity DSR Amount (RS.)
1.0 CARRIAGE OF MATERIAL
1.1 By Mechanical Transport including loading,unloading and stacking
1.1.2 Carriage of earth
2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means
over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by
Engineer-in-charge.
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in
foundation over areas (exceeding 30cm in depth , 1.5 m in width or 10 sqm on plan),
2.7 including disposal of excavated earth, for all leads and lifts, disposed earth to be levelled
and neatly dressed.
2.7.1 Ordinary rock Cum 2.04 498.90 1,017.76
2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the
excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by cum 8.33 196.00 1,632.68
ramming and watering, lead up to 50 m and lift upto 1.5 m.
2.25(a) Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical
transport upto a lead of 5km also including ramming and watering of the earth in layers
not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for
2.27 Sand filling in plinth including supply of necessary quantity of sand from any distance at
site of work and including watering dressing etc. required for proper completion of work. cum 14.77 2,123.75 31,367.79
2.34 Supplying chemical emulsion in sealed containers including delivery as specified.
Digitally signed by ARTI
NBCC (INDIA) LTD
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 74.91 234.75 17,585.12
2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite
2.35.2.1 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25
litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ metre 125.55 53.45 6,710.65
Lindane E.C. 20% with 1% concentration
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work up to plinth level
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone
aggregate 40 mm nominal size derived from natural sources)
4.3 Centering and shuttering including strutting, propping etc. and removal
of form work for
4.3.1 Foundations, footings, bases for columns Sqm 12.34 392.15 4,839.13
5.9.16 Edges of slabs and breaks in floors and walls.
6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 69.49 7,132.25 4,95,620.05
6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in
all shapes and sizes in:
6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) cum 60.77 9,105.95 5,53,368.58
8.14 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10
metre height, backing filled with a grout of average 12 mm thick cement
mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement
mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment
matching the stone shade : (To be secured to the backing and the sides
by means of cramps and pins which shall be paid for separately) :
8.14.2 Red sand stone - Exposed face machine cut and table rubbed with rough backing.
Digitally signed by ARTI
NBCC (INDIA) LTD
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
BILL OF QUANTITY (CIVIL ITEMS)
8.15 Providing and fixing stainless steel cramps of required size and shape for
anchoring stone wall lining to the backing or securing adjacent stones in
stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including
making the necessary chases in stone and holes in walls wherever required.
8.16 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing
adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 each 176.00 43.90 7,726.40
coarse sand), including making the necessary chases.
10.27 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener
of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head,
comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame ,
concrete/ masonry, etc. as per direction of Engineer-in-charge.
11.30 40 mm thick rubbed stone flooring over 20 mm (average) thick base of
cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side
buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with
pigment to match the shade of stone and pointing with same mortar.
11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone
11.32 Extra for Kota stone/ sand stone in treads of steps and risers using single
length above normal size up to 2.00 metre.
13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster
1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement Sqm 16.72 518.55 8,670.16
plaster 1:6 (1 cement : 6 fine sand).
13.48A Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted)
having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal
resistance, dirt resistance exterior paint of required shade with silicon additives.
13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming
coat of exterior primer applied @ 0.90 litre/10 sqm.
TOTAL OF SCHEDULE ITEM 39,19,577.47
Digitally signed by ARTI
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and
Animal Science and college of Fisheries at RLBCAU at Datia.”
NON SCHEDULED AMOUNT
S.NO DESCRIPTION DSR-2023/AMOUNT (RS.)
1 DRAINAGE WORK 51654.10 0.00
2 EARTH WORK 17607.50 0.00
TOTAL AMOUNT 69261.60 0.00
TOTAL AMOUNT 69261.60 0.00
GRAND TOTAL 69,261.60
GRAND TOTAL 69,261.60
Digitally signed by ARTI
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
DSR -2023 DSR-2023 AMOUNT
DESCRIPTION OF ITEM UNIT QUANTITY
/NS ITEM No. RATE (RS.) (RS.)
Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars
19.6 jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2
fine sand) including testing of joints etc. complete :
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in
cement mortar 1:4 (1 cement : 4 coarse sand) including
500x450 mm pre-cast R.C.C. horizontal grating with frame complete
as per standard design :
With common burnt clay F.P.S. (non modular) bricks of class
SUB TOTAL( SEWERAGE & DRAINAGE) 51654.10
Excavating trenches of required width for pipes, cables, etc includingexcavation
for sockets, and dressing of sides, ramming of bottoms,depth upto 1.5 m,
including getting out the excavated soil, and thenreturning the soil as required, in
2.10 layers not exceeding 20 cm in depth,including consolidating each deposited layer
by ramming, watering,etc. and disposing of surplus excavated soil as directed,
within a leadof 50 m :
2.10.1 All kinds of soil
2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Mtr 50 352.15 17607.50
SUB TOTAL( EARTH WORK) 17607.50
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and
college of Fisheries at RLBCAU at Datia.”
ESTIMATE - CUTTING FILLING WORKS
DSR 2023 DSR 2023
DESCRIPTION Unit Quantity Amount (RS.)
1.0 CARRIAGE OF MATERIAL
1.1 By Mechanical Transport including loading,unloading and stacking
1.1.2 Carriage of earth
1.1.4 Carriage of Excavated rock
2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over
areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed
by Engineer-in-charge.
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in
foundation over areas (exceeding 30cm in depth , 1.5 m in width or 10 sqm on plan),
2.7 including disposal of excavated earth, for all leads and lifts, disposed earth to be levelled
and neatly dressed.
2.7.3 Hard rock (Blasting Prohibited) Cum 1532.92 1432.95 21,96,597.71
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by cum 24526.72 196.00 48,07,237.12
ramming and watering, lead up to 50 m and lift upto 1.5 m.
2.25 (a) Excavating, supplying and filling of local earth (including royalty) by mechanical transport
upto a lead of 5km also including ramming and watering of the earth in layers not cum 57919.28 700.50 405,72,455.64
exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
TOTAL OF SCHEDULE ITEM 643,58,281.74
Civil-Type-II-49 Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
ESTIMATE- HORTICULTURE AND LANDSCAPING WORKS
CPWD DSR including
Description of Item Common Name Unit Quantity Rate Amount (RS.)
2023 GST Factor
2.27 Supplying and filling in plinth with sand under floors, including
watering, ramming, consolidating and dressing complete.
2.6 Earth work in excavation by mechanical means (Hydraulic
excavator)/manual means over areas (exceeding 30 cm in
depth, 1.5 m in width as well as 10sqm on plan) including
getting out and disposal of excavated earth lead upto 50 m
and lift upto 1.5 m, as directed by Engineer-in-charge.
2.6.1 All kinds of soil. cum 1572 177.5 2,79,030.00
2.7 Earth work in excavation by mechanical means (Hydraulic
excavator)/manual means over areas (exceeding 30 cm in
depth, 1.5 m in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth lead upto 50 m and
lift upto 1.5 m, as directed by Engineer-in-charge.
2.7.3 Hard rock (blasting prohibited)
2.25 (a) Excavating, supplying, stacking and filling of local earth
(including royalty) by mechanical transport upto a lead of 5km
also including ramming and watering of the earth in layers not cum 1310 700.5 9,17,655.00
exceeding 20 cm in foundation trenches, plinth, sides of
foundation etc. complete for all lift.
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone
aggregate 40 mm nominal size) cum 652.39 6812 44,44,079.39
6.1.1 Brick work with common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
6.4.1 Brick work with common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 in superstructure above plinth level up 9344.35 10,74,600.25
to floor V level in all shapes and sizes in :
6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
ESTIMATE- HORTICULTURE AND LANDSCAPING WORKS
8.14 Stone work (machine cut edges) for wall lining etc. (veneer
work) upto 10 metre height, backing filled with a grout of
average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse
sand) including pointing in white cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of pigment matching
the stone shade : (To be secured to the backing and the sides
by means of cramps and pins which shall be paid for
8.14.1 Red sand stone - exposed face fine dressed with rough
10.25 Steel work welded in built up sections/ framed work, including
cutting, hoisting, fixing in position and applying a priming coat
of approved steel primer using structural steel etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates
and similar works kg 3500 172.6 6,04,100.00
10.28 Providing and fixing stainless steel ( Grade 304) railing made of
Hollow tubes, channels, plates etc., including welding, grinding,
buffing, polishing and making curvature (wherever required)
and fitting the same with necessary stainless steel nuts and
bolts complete, i/c fixing the railing with necessary accessories
& stainless steel dash fasteners , stainless steel bolts etc., of
required size, on the top of the floor or the side of waist slab kg 1100 772.4 8,49,640.00
with suitable arrangement as per approval of Engineer-in-
charge, (for payment purpose only weight of stainless steel
members shall be considered excluding fixing accessories such
as nuts, bolts, fasteners etc.).
11.56 Providing and laying Polished Granite stone flooring in required
design and patterns, in linear as well as curvilinear portions of
the building all complete as per the architectural drawings with
18 mm thick stone slab over 20 mm (average) thick base of
cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed
with cement slurry and pointing with white cement slurry
admixed with pigment of matching shade including rubbing ,
curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge.
11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown,
Cat Eye or equivalent.
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
ESTIMATE- HORTICULTURE AND LANDSCAPING WORKS
16.3 Supplying and stacking at site.
16.11 Dry stone pitching 22.5 cm thick including supply of stones and
preparing surface complete.
16.91 Providing and laying factory made chamfered edge Cement
Concrete paver blocks In foot path, park & lawns driveway or light
& traffic parking etc. of required strength, thickness & size/ shape,
made by table vibratory method using PU mould, laid in required
colour & pattern over 50mm thick compacted bed of course sand,
compacting and proper embedding/laying of inter locking paver
blocks into the sand bedding layer through vibratory compaction by
using plate vibrator, filling the joints with sand and cutting of paver
blocks as per required size and pattern, finishing and sweeping
extra sand, all complete as per manufacturer's specifications &
direction of Engineerin- Charge
16.91.1 60mm thick Cement concrete paver block of M-35 grade with
approved colour, design & pattern.
Total Civil DSR (2023)-Items 289,81,126.22
Horticulture Rate
and Description of Item Common Name Unit Quantity Rate including Amount (RS.)
Landscaping GST @18%
2.4 Supplying and stacking at site dump manure from approved
source, including carriage upto 5 km lead complete (manure
measured in stacks will be reduced by 8% for payment) :
2.4.1 Screened through sieve of I.S. designation 20 mm
2.6 Uprooting weeds from the trenched area after 10 to 15 days of
its flooding with water including disposal of uprooted sqm 14410.00 4.9 5.78 83,289.80
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
ESTIMATE- HORTICULTURE AND LANDSCAPING WORKS
2.8 Spreading of sludge, dump manure and/or good earth in
required thickness as per direction of officer-in-charge (cost of
sludge, dump manure and/ or good earth to be paid
2.14 Digging holes in ordinary soil and refilling the same with the
excavated earth mixed with manure or sludge in the ratio of
2:1 by volume (2 parts of stacked volume of earth after
reduction by 20% : 1 part of stacked volume of manure after
reduction by 8%) flooding with water, dressing including 0.00
removal of rubbish and surplus earth, if any, with all leads and
lifts (cost of manure, sludge or extra good earth if needed to be
paid for separately)
2.25 Supplying and stacking of well decayed cattle manure at site
including royalty and carriage upto 5 k.m. lead complete (Cattle 247.5 292.05 7,65,171.00
manure measured in stacks will reduced by 8% for Payment).
2.28 Preparation of mounds of various size and shape by available
excavated / supplied earth in layers not exceeding 20 cm in
depth, breaking clods, watering of each layer, dressing etc., cum 800.00 456.35 538.49 4,30,792.00
lead upto 50 meter and lift upto 1.5 m complete as per
direction of Officer-in-charge.
2.33 Providing and fixing Neelgiri/Mexican grass turf with earthy
50mm to 60mm thickness of existing ground prepared with
proper level and ramming with required tools wooden
(Dhurmos) and than rolling the surface with light roller make Sqm 7860 214.4 252.99 19,88,501.40
the surface smoothen and light, watering with sprinkler and
maintenance for 30 days or more till the grass establish
properly as per direction of officer incharge.
2.56 Anti termite treatment of lawn area through premise 30.50% I
P. one liter premise diluted in 499 liters water and applying
solution @ 1.00 litre solution per sqm lawn or bed area.(two sqm 14410.00 7.55 8.91 1,28,393.10
application) i/c cost of chemical)and as per direction of officer-
13.61 Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade: 0.00
13.61.1 Two or more coats on new work sqm 2620.00 113.95 134.46 3,52,285.20
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
ESTIMATE- HORTICULTURE AND LANDSCAPING WORKS
2.58 Providing and fixing of Tuflex Garden fencing Hexagonal net/or
equivalent of green colour having contents ( Weight
grams/sqm. 510 (+/- 8%)) in width of 60 cm. with bamboo of
90 cm. length. The bamboo should be painted with green colour
paint of approved brand and manufacture (two or more coats) sqm 5652.00 204.00 240.72 13,60,549.44
and fixed 30 cm. below ground level and 60 cm. above ground
level at a distance of 1.50 mtrs. The net and bamboo should be
binded with 2 mm. G.I. Wire at three places properly as per
direction of Engineer-in-charge.
2.29 Providing Circular Cement Concrete pots of specified size, cast
with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse
sand: 4 graded stone aggregate 6 mm nominal size), reinforced
with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S.
wires of 3.5 mm dia as per design, including required form 0.00
work, finishing with cement punning on exposed surface, curing
for specified period and stacking in required rows & height, all
complete as per direction of Officer-in-charge.
2.29.1 Top inside dia 35 cm, outer bottom dia 25 cm, total height 35
cm with wall thickness of 25.4 mm
2.29.2 Top inside dia 30 cm, outer bottom dia 20 cm, total height 30
cm with wall thickness of 25.4 mm
2.31 Filling of the following size empty pots with mixture of good
earth & manure in the ratio of 2:1 (Two part of Good earth &
one port of manure) and placing them on approprite place i/c
carriage of earth, manure and pots up to 50 mtr, as per 0.00
direction of officer incharge. (The cost of good earth, earthen
pots & manure will be paid seperately.)
2.31.6 Size of Empty Pots 25cm Top dia, 15cm Bottom Dia & 25cm
Perpendicular height.
2.31.7 Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm
Perpendicular height.
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
ESTIMATE- HORTICULTURE AND LANDSCAPING WORKS
2.40 Complete maintenance of the entire garden features having as
per yard stick in the garden area i.e. lawn trees, shrubs, herbs,
edge, flower beds, foliages, creepers etc. including
oeing,weeding, pruning, replacement of plants, gap filling,
watering, mowing of lawn, grass cutting by lawn mover
and brush cutter, removal of garden waste, applying
insecticide, pesticide & fertilizers(whenever required) top 0.00
dressing of lawn with good earth and manure and maintenance
of other garden related works as directed by office-in-charge
(Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide
will be provided by the Department & lawn mover and brush
cutter with fuel and other T & P material/articles shall be
provided by the contractor.) and as per direction of officer in
2.40.2 Permanent office accommodation.(1Mali for 1.25Acre) for 24
months ater completion of work Sqm/
2.42 Complete maintenance of trees, jobs like making of basin at
regular interval,application of fertilizer etc, (excluding the cost
of material which shall be supplied by the department and other 0.00
T & P material/articles shall be provided by the contractor) as
per direction of officer in charge
2.42.1 Trees for 250 no/(up to 4 & up to 3 year Slow & Fast Per Plant/ Per
growing group) plant/
2.57 Plantation of Trees, Shrubs, and Hedge at site i/c watering and
removal of unsaverieable material’s as per direction of officer in
charge (excluding cost of plant & water)
2.57.3 Hedge Plant /Ground cover each 51545.00 2.45 2.89 1,48,965.05
3.36 Providing and displaying of Croton Petra Bangalore variety
having ht 45 cm & above, well developed with fresh and
healthy leaves in 20 cm size of Earthen pot/Plastic pot. & as per
direction of the officer-in-charge.
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
ESTIMATE- HORTICULTURE AND LANDSCAPING WORKS
3.78 Providing and displaying of Rhapis palm specimen plant, having
ht. 1.50 m to 1.65 m with 40 to 50 lush green suckers, well
developed, fresh & healthy foliage leaves in 40 cm size of Raphis palm each 75 530.95 626.52 46,989.00
Earthen Pot/Chali/Tray & as per direction of the officer-in-
5.11 Providing and Displaying Bismarckia Palm 115 to 180 cm ht.,
well developed 12 and above good color fresh and healthy 1937.25 2285.96 1,02,868.20
Bismarckia palm each 45
leaves in 40 cm Cement Pot as per direction of the officer-in-
5.12 Providing and Displaying Bougainvillea named variety, Sobhra,
Thima, Marry palmar, Cherry Blossom etc. well developed with
fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 Bougainvillea Nos. 400 322.9 381.02 1,52,408.00
cm Cement Pot as per direction of the officer-in-charge.
5.43 Providing and Displaying Travelers palm well developed with
fresh & healthy leaves foliage 210 to 240 cm ht specimen plant
Traveller's palm each 15 973.75 1149.03 17,235.45
in 40 cm Cement Pot as per direction of the officer-in-charge.
5.44 Providing and Displaying Washingtonia filifera palm well
developed 90 to 105 cm ht. having 5 to 6 straight fresh and 538.15 635.02 6,985.22
Washingtonia palm each 11
healthy leaves in 35 cm Cement Pot as per direction of the
officer-in-charge.
6.12 Providing and stacking of Duranta Golden, having ht.15 to 20
cm bushty shape with fresh and healthy leaves in 15 cm size of 20 23.60 70,800.00
Earthen Pot / Plastic Pot & as per direction of the officer-
6.17 Providing and stacking of Iresine herbstii, of height 20-30 cm.,
full of branches well developed in 15 cm size of Earthen Pot /
Plastic Pot & as per direction of the officer-in-charge..
6.29 Providing and stacking of Tradescantia, full of leaves in Earthen
Pot/Plastic Pot of size 20 cm. as per direction of the officer-in- each 480 21 24.78 11,894.40
6.31 Providing and stacking of Wedelia trilobata, full of leaves in 15
cm size of Poly bags & as per direction of the officer-in-charge. each 8000 15 17.70 1,41,600.00
6.7 Providing and stacking of Clerodendrum inerme having ht. 25
cm to 30 cm multi branched in 15 cm size of Earthen Pot / each 1120 20 23.60 26,432.00
Plastic Pot & as per direction of the officer-in-charge.
7.1 Providing and stacking of Acacia auriculiformis of ht 150-165 cm
in bag size of 25 cm as per direction of the officer-in-charge. Dal moth each 220 65 76.70 16,874.00
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
ESTIMATE- HORTICULTURE AND LANDSCAPING WORKS
7.5 Providing and stacking of Azadirachta indica ( Neem ) of height
120-130cm in big polybag of size 25 cm as per direction of the Neem each 405 65 76.70 31,063.50
officer-in-charge.
7.7 Providing and stacking of Bauhinia blakeana (Kachnar) of height
120-150 cm. in big poly bags of size 25 cm as per direction of each 405 80 94.40 38,232.00
the officer-in-charge
7.9 Providing and stacking of Bombax ceiba of height 150-165 cm.
in big poly bags of size 25 cm as per direction of the officer-in- Cotton tree each 50 70 82.60 4,130.00
7.14 Providing and stacking of Callistemon lanceolatus of height
150-165 cm. in big poly bags of size 25 cm as per direction of Bottle Brush each 85 65 76.70 6,519.50
the officer-in-charge.
7.16 Providing and stacking of Cassia fistula (Amaltash) of height
120-135 cm. in big poly bags of size 25 cm as per direction of Amaltas each 370 65 76.70 28,379.00
the officer-in-charge.
7.21 Providing and stacking of Chorisia speciosa of height 150-165
Resham rui/ Paradise
cm. in big poly bags of size 25 cm as per direction of the officer- each 145 80 94.40 13,688.00
7.24 Providing and stacking of Delonix regia (Gulmohar) of height
150-165 cm. in big poly bags of size 25 cm as per direction of Gulmohar each 50 60 70.80 3,540.00
the officer-in-charge.v
7.27 Providing and stacking of Ficus benjamina (green) of height 150-
165 cm., bushy with healthy branches and lush green foliage in
Weeping fig each 45 180 212.40 9,558.00
big size HDPE bags as per direction of the officer-incharge.
7.53 Providing and stacking of Mangifera indica (Mango-grafted ) of
height 60-75 cm. in big poly bag of size 25 cm as per direction Aam each 150 55 64.90 9,735.00
of the officer-in-charge.
7.59 Providing and stacking of Mimusops elengi (Maulsri) of height
180-195 cm., well developed with thick stem in big in big size Spanish cherry each 295 125 147.50 43,512.50
HDPE bag as per direction of the officer-in-charge.
7.60 Providing and stacking of Nauclea cadamba (Kadam) of height
150-165 cm. in big poly bag of size 25 cm as per direction of Cadamba/Tulip tree each 165 65 76.70 12,655.50
the officer-in-charge.v
7.62 Providing and stacking of Peltophorum species of height 150-
165 cm. in big poly bags of size 25 cm as per direction of the Peela Gulmohar each 220 60 70.80 15,576.00
officer-in-charge.
7.71 Providing and stacking of Plumeria alba dwarf dwarf of height
90-105 cm. with 3-4 branches and thick stem in big size HDPE Champa each 130 750 885.00 1,15,050.00
bags as per direction of the officer-in-charge.
7.72 Providing and stacking of Plumeria rubra of height 120-150 cm.
with 3-4 branches and thick stem in big size HDPE bags as per Red Champa each 175 400 472.00 82,600.00
direction of the officer-in-charge.
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
ESTIMATE- HORTICULTURE AND LANDSCAPING WORKS
7.75 Providing and stacking of Polyalthia longifolia (Ashok) of height
180-195 cm. in gunny bag of size 30 cm as per direction of the Ashoka each 980 100 118.00 1,15,640.00
officer-in-charge.
7.79 Providing and stacking of Putranjiva roxburghii of height 90-105
cm. in big polybag of size 25 cm as per direction of the officer- Putranjiva each 100 45 53.10 5,310.00
8.28 Providing and stacking of Ficus panda of height 90-105 cm. with
10-12 branches and healthy foliage, well formed in cement pots 225 265.50 11,28,375.00
Panda each 4250
of size 30 cm as per direction of the officer-in-charge.
8.33 Providing and stacking of Hamelia patens of height 90-105 cm.
bushy in big size HDPE bags as per direction of the officer-in- Hamelia each 1550 100 118.00 1,82,900.00
8.46 Providing and stacking of Murraya exotica of height 45-60 cm.
in poly bags of size 15 cm as per direction of the officer-in- each 2845 15 17.70 50,356.50
8.51 Providing and stacking of Nerium oleander (kaner) dwarf of
height 30-40 cm. in earthen pot of size 20 cm as per direction Nos. 100 40 47.20 4,720.00
of the officer-in-charge.
8.54 Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of
ht. 90-105 cm in Earthen pots of size 20 cm as per direction of Parijat each 350 40 47.20 16,520.00
the officer-in-charge.
8.63 Providing and stacking of Tabernaemontana coronaria (Chandni
single) variegated of height 105-120 cm., multibranched, bushy Chandini/ Spicy
in big size HDPE bag as per direction of the officer-incharge. Jetropha
2.1 Grassing with selection No. 1/ Doob grass including watering
and maintenance of the lawn for 30 days or more till the grass
forms a thick lawn, free from weeds and fit for mowing 0.00
including supplying good earth, if needed (the grass and good
earth shall be paid for separately)
2.10.1 In rows 5 cm apart in both directions sqm 13100 17.7 20.89 2,73,659.00
2.34 Providing & laying Selection no. 1 doob grass turf with earth
50mm to 60mm thickness of existing ground prepared with
proper level and ramming with required tools wooden and than
rolling the surface with light roller make the surface smoothen per
and light watering the same and maintenance for 30 days or sqm
more till the grass establish properly, as per direction of the
officer in charge
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
ESTIMATE- HORTICULTURE AND LANDSCAPING WORKS
2.35 Supplying & Stacking of Selection No.1/doob grass at site fresh
& free from weeds having proper roots in green including per
loading, unloading, carriage and all taxes paid etc.and as per sqm
direction of officer in charge
7.4 Providing and stacking of Alstonia scholaris of height 150-165
cm. in bag of size 25 cm as per direction of the officer-in- each 1000 65 76.70 76,700.00
7.74 Providing and stacking of Polyalthia longifolia (Ashok) of height
150-165 cm. in earthen pots of size 25 cm as per direction of each 1300 80 94.40 1,22,720.00
the officer-in-charge.
5.41 Providing and Displaying Topiary of Casuarina fresh & healthy
having 5 to 6 specific shape and size ball well developed 195 to
210 cm ht. in 40 cm Cement Pot as per direction of the officer-
5.33 Providing and Displaying Golden Bottle brush Topiary well
developed with fresh & healthy foliage 5 to 6 big ball 115 to
180 cm ht in 40 cm Cement Pot as per direction of the officer-in-
8.76 Providing and stacking of Thuja compacta of height 75-90 cm.,
conical shaped, well formed with healthy foliage in earthen pots 130 153.40 23,010.00
of size 30 cm as per direction of the officer-in-charge.
4.88 Providing and stacking of plant Mogra of height 25 to 30 cm., 2
to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic 46.15 54.46 21,784.00
Pot and as per direction of the officer-in-charge.
8.7 Providing and stacking of Calliandra hybrida of height 105-120
cm., well branched, bushy in big size HDPE bag as per direction each 200 90 106.20 21,240.00
of the officer-in-charge
8.4 Providing and stacking of Caesalpinia pulcherrima species of
height 45-60 cm. in earthen pot of size 20 cm as per direction each 550 45 53.10 29,205.00
of the officer-in-charge.
5.30 Providing and Displaying Foxtail palm well developed with fresh
& healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot each 55 1183.9 1397.00 76,835.00
as per direction of the officer-in-charge
7.41 Providing and stacking of Fishtail palm of ht. 270-300 cm
bottom girth 40- 50 cm well developed in big size HDPE bags as each 40 550 649.00 25,960.00
per direction of the officer-in-charge.
3.22 Providing and displaying of Areca Palm having ht. 2.40 m to
2.70 m with 12 to 14 suckers, well developed, fresh and 592.45 699.09 34,954.50
healthy with lush green foliage in 35 cm size of Bucket type
cement pots & as per direction of the officer-in-charge
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of
Fisheries at RLBCAU at Datia.”
ESTIMATE- HORTICULTURE AND LANDSCAPING WORKS
5.1 Providing and Displaying Acalypha Different colour well
developed, fresh & healthy with good foliage, multi branch 30
to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy as
per direction of the officer-in-charge.
9.14 Providing and stacking of Vernonia elaegnifolia (curtain creeper)
plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / 25 29.50 11,800.00
Plastic pots & as per direction of the officer-in-charge.
9.10 Providing and stacking of Passiflora caerulea (Rakhi bel) of
height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic each 400 50 59.00 23,600.00
pots & as per direction of the officer-in-charge
9.7 Providing and stacking of Ipomoea purpurea (Morning glory) of
height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic each 400 35 41.30 16,520.00
pots & as per direction of the officer-in-charge.
Total DSR Horticulture and Landscaping-2020 including GST 159,71,394.31
Digitally signed by ARTI
NBCC (INDIA) LTD
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary
and Animal Science and college of Fisheries at RLBCAU at Datia.”
ESTIMATE - SPORTS GROUND WORKS
DSR NO. DESCRIPTION OF ITEM DSR 2023 RATE
2023 UNIT Quantity (RS.) / Market Rate AMOUNT (RS.)
SCHEDULE ITEMS: (RS.)
1.1. By mechnical transport including loading, unloading & stacking
1.1.4 Excavated rock
2.6 Earth work in excavation by mechanical means (Hydraulic
excavator)/manual means over areas (exceeding 30 cm in depth, 1.5
m in width as well as 10 sqm on plan) including getting out and
disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as
directed by Engineer-in-charge.
2.7 Earth work in excavation by mechanical means (Hydraulic excavator)/
manual means over areas (exceeding 30 cm in depth, 1.5 m in width
as well as 10 sqm on plan) including getting out and disposal of
excavated earth lead upto 50 m and lift upto 1.5 m, as directed by
Engineer-in-charge.
2.7.3 Hard rock (blasting prohibited) cum 377.49 1432.95 540924.30
Preparation and consolidation of sub-grade with power road roller of 8
to 12 tonne capacity after excavating earth to an average of 22.5cm
depth, dressing to camber and consolidating with road roller including
making good the undulations etc. and re-rolling the sub-grade and
disposal of surplus earth lead upto 50 mtr.
Road-61 Digitally signed by ARTI
Extra for compaction of earth work in embankment under optimum
16.2 moisture conditions to give at least 95% of the maximum dry density Cum 5426.50 24.85 134848.53
16.3 Supplying and stacking at site.
16.3.1 90 mm to 45 mm size stone aggregate Cum 65.00 2098.40 136396.00
16.3.3 53 mm to 22.4 mm size stone aggregate Cum 85.00 1842.30 156595.50
16.91 Providing and laying factory made chamfered edge Cement Concrete
paver blocks In foot path, park & lawns driveway or light & traffic
parking etc. of required strength, thickness & size/ shape, made by
table vibratory method using PU mould, laid in required colour &
pattern over 50mm thick compacted bed of course sand, compacting
and proper embedding/laying of inter locking paver blocks into the
sand bedding layer through vibratory compaction by using plate
vibrator, filling the joints with sand and cutting of paver blocks as per
required size and pattern, finishing and sweeping extra sand, all
complete as per manufacturer's specifications & direction of
Engineerin- Charge
16.91.2 80 mm thick C.C. paver block of M-30 grade with approved
color design and pattern.
TOTAL OF SCHEDULE ITEMS 69,64,512.38
NON-SCHEDULE ITEM
SUB-BASE FOR Tennis, BAsketball, & Track,
Providing & Laying 60 to 80mm oversize Metal Compacted to 150mm thk.
Including Murum, Spreading, Watering, Rolling, etc., complete.
"Providing & Laying 75 mm thick semi grount bituminous road surface
including supplying all materials preparing the existing road surface, laying
the required thickness of metal layer, heating and spraying bitumen
spreading chips complete.
Road-62 Digitally signed by ARTI
Acrylic surface for Tennis & baSKETBALL
5 layers System ITF approved over the Asphalt sub base For tennis AND
2 coat of Acrylic Resurface
NS-2 2 coats of All Sports Color with silica sand SQM 480.00 1489.86 7,15,130.90
1 coat of colour
for game line marking
Providing and laying a 13 mm World Athletic Federation Approved Sprey-
On system consisting of 11 mm thick, recycled rubber granules, 1 - 4 mm
mix with binder and installed on existing asphalt base with Priming layer to
The asphalt base to improve its mechanical properties and adhesion.
Close the pores of the rubber base layer with 2 components PU Sealing
coat to obtain a uniform mass and then spread a thin layer over the rubber
2mm thick Top layer spray system with 2 component spray system with
added 0.5-1.5 mm Granules EPDM spray with machine on rubber base
NS-3 layer and line marking complete. SQM 1100.00 6814.73 74,96,204.85
The surface meets:
- technical parameters according to PN-EN 14877:20014 standard
- IAAF certificate number S-06-0066
- hygienic attestation of the National Institute of Hygiene
- tests on contents of trace elements of heavy metals
The IAAF-approved synthetic Track manufacturer should be of European/
American origin only. The submission of a certificate of origin is mandatory
Supply & Fixing of FRP composite Drain with 250 external and 200 mm
internal width& 30 to 250 mm variable depth 1:200 inbuild gradient, 2
meters long overlap joints sealing with sealants during installation for
NS-4 leakages proof water draining with Polymer mesh design grating having 2.5 Mtr 480.00 652.68 3,13,285.69
tone load bearing capacity
Supply and laying of 100 mm brocken brickbat compacting the same with
Road-63 Digitally signed by ARTI
Supplying, deliver , and stacking on site medium Fine sand( Silica) with
sandy loam suitable including Transportation, loading, unloading, royalty
NS-6 etc. Complete as directed by engineer in charge. CUM 730.20 4392.78 32,07,609.74
Supplying and spreading of a special red soil 100 mm including watering
NS-7 and comapction with 8 ton vibrator roller etc. SQM 360.00 2016.69 7,26,008.88
mixing and Spreading rootzone Sand: Very Coarse sand(1mm To 1.5mm
range) :- 5% of the material , Coarse sand(0.5 mm To 1mm range):40% of
the material, Medium Sand( 0.5 to 0.25mm) & Fine Sand (0.25 to 0.15
mm) not more than 30%.Very find Sand (0.15 to 0.05 mm) Maximum
NS-8 permissable 20% , Silt and Clay <0.05mm No more than 5% silt and clay.) SQM 7140.00 127.84 9,12,760.04
As directed by consultant.
construction of Cricket Pitch with all materials and labour .
Area / Size of Pitch - 25 L x 3.05 W X 9 PITCH
Materials use for Pitch
a) 100 MM GSB .
C) 150 mm sand filter media.
d) 250 mm picth soil with Black cotton
e)Cynodone dactylon
Pace Friendly pitch Pitch area = 2.74 M wide X 12 Mtr length X 2 Nos
supply and installation 12 mm thick dense, Knit De Knit polypropylene fibres
surfaces over 6 mm thick shock pad for Cricket Wicket / Pitch area,
NS-10 permanent installation with adhesive. Pile Height 6 mm high Pile Product sqm 170.00 7231.72 12,29,392.53
Weight should not less than 1,550gsm
Road-64 Digitally signed by ARTI
3 M height Cricket cage Specification 2 BayX 12 mtr x 4 width.
Providing & Fixing Factory finished 3 M height Cricket cage with powder
coated steel, it includes 3 Mtr High ф 60 mm MS pipes, Green powder
coatedvertical post inserted in sleeve provided at the bottom at 3.8 mtr
center to center distance, and ф 42 mm (OD) MS pipe HORIZANTAL post,
Horizontal post should be factory finished Green powder coated installed at
Top and Bottom location for 3 mtr Height with the help of with flange and
hardware, 50x 50 x 2.5 mm Nylon Net fixed to 2 side, top and back side of Nos 1.00 439765.62 4,39,765.62
bay with the help of6mm nylon rope. The Cricket net system should sustain
impact of the ball, inner side of fence should be free from any
projected parts/joints
SPORTS EQUIPMENTS
Movable goal post
Providing & Fixing in-position 110mm oval shape Aluminium Powder coated
Goal Post (Dimensions 7.32m x 2.44m) with 3-4mm braided Goal net of
size Size 7.32 X 2.44 X 1.2- 3 mm. Each set of Goal Posts will consist of 2
verticals with horizontal distance between the inside of the posts 7.32m (8
yards) and 1 Horizontal with a vertical distance from the lower edge of the
NS-12 crossbar to the ground 2.44m (8 ft). Goal nets fixed with plastic. Including Pair 1.00 5,89,959.53 5,89,959.53
Full length, net supports Heigh rise wheels, White
Back bar with weight insert provision to stability
All materials and size are to be as per FIFA QUALITY Standards
Fixed Basketball Post
sypplying of Fixed Basketball post with net, outdoor model Made of 150 mm
x 150 mm Sq tube with boom extension of 3.2 m.
Board Frame: 40 mm x 40mm square tube structure with 12mm Toughen
NS-13 Glass 1800X1050X (12 mm) mounted with the help of cross support. Pair 1.00 2,84,756.60 2,84,756.60
Dunking ring: dunking rim with three spring mechanism. Die made, as per
international standard. As approved design."
Road-65 Digitally signed by ARTI
Volleyball Post
supplying and Installation of Removable Volleyball Post comes with dia 76
mm outer pole with red powder coating and
Dia 60 mm adjustable upright with zinc plating.
NS-14 Height can adjust 2M to 2.5m by manual pin locking system. Pair 2.00 1,03,646.84 2,07,293.69
Volleyball post fixed by using ground sleeves with holdfastand concrete.
Manual winch is provided for tightening the net.
Spectator Seating /Grandstand /Demountable Spectator Seating System Nos 100.00 26,416.42 26,41,641.69
for Sports Ground
Supply and installation Grand Stand /Demountable Spectator Seating
System for Sports Ground which includes 48 dia vertical, horizontal and
cross HOT dip Galvanized pipe and 50 mm X 50 mm sq. pipe 3.25 Mtr
long Support Beam structure as per manufaturer specification fixed at c/c
Distance 2075 mm. All vertical horizontal cross and support frame connect
with the help of ring Connector with locking arrangement.
"The Grandstand sizes should be as follows Deck width should be minimum
880 mm wide Riser Height should be minimum 300 mm height Aisle Width:
Seat Center to center distance 460 -480 mm "
Aluminum Floor Deck
1.5 mm -2 mm mm thick and 38 mm high anti Skid Extruded Aluminum
Floor deck with supporting legs , The deck and understructure joined
together through M10 high tension torque fasteners.
The guardrail is made with 40 X 20 mm rectangular & 20 x 20 mm sq. GI
HDPE Blow Mould Seat
Providing and fixing double-wall hollow blow mold bucket type seat
minimum having dimensions as 465 mm side length x 440 mm front width x
Road-66 Digitally signed by ARTI
minimum having dimensions as 465 mm side length x 440 mm front width x
400 mm rear height in one piece of HDPE having minimum shell thickness
of 3 mm on each wall and minimum density of 0.95 gram/cm3, weight of
plastic chair should not less than 2 kg, chair should withstand in high
temperature not less than 70°C with ultraviolet stabilizer and color fastness,
having ergonomic design, with two digit aluminum number plate for seat to
be fixed on Galvanized pipes 25 Nominal Bore light as per IS1239 (PART
1): 2004 running under the chairs.
Front cover panel
GI SHEET 1.6 mm thick bended with bending machine as per front cover
design and fixed to the main frame width of front cover panel should be
MS SHEET 1.6 MM THICK bended with bending machine as per Step Size
with angle support and floor with 3 mm thick MS checkered plate.
Road-67 Digitally signed by ARTI
5 Rows Aluminium Bleacher with HDPE blow moulded Seat
Supply of Aluminium Bleacher of 5 rows for 45 persons.
The dimension of the Structure is (4.5L X 3.15W X 1.5H)
The under structure is made by welded aluminium Square pipe and angle
Coating.The tread is made of extruded aluminium and anodized.
Aisle Deck width 500 mm and Riser Height 200 mm, system length 4.5m,
HDPE Blow Molded Seat.
Double-wall hollow blow mold bucket type seat having minimum dimensions
as 500 mm side length x 440 mm front width x 420 mm rear height in one
piece of HDPE having minimum shell thickness of 3 mm on each wall.
Minimum seat density of 0.95 gram/cm3, weight of plastic chair should not
be less than 2.65 kg. Chair should withstand in high temperature not less
than 50°C with ultraviolet stabilizer and color fastness, having ergonomic
NS-16 design, the chair should be fixed with Metal Inserts moulded inside seat to set 2.00 7,40,119.32 14,80,238.64
connect seat with Galvanized pipes 32mm OD tube and 2 mm thickness
running under the chairs. The pipes are resting above the square
pipe.Water should not accumulate on chair. Chair should have a warranty
of 2 years against significant colour fading and 3 years against breakage
due to manufacturing defects.
Chair Plastic Part should have been tested with xenon –Arc exposure Test
as per ISO 4892-2:2013, Cycle-1.
The Grey Sale Rating should be (GSR): > 4,
Product features:
Suitable Indoor for outdoor use.
Being Aluminium struct
Road-68 Digitally signed by ARTI
Providing, and fixing Leg Press of size 2000 X 405 X 1660 mm
fabricated with main post of 140 mm dia and 2.5 mm thick rest of the
pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled
tubular steel and hot dipped galvanized, and powder coated using
of 80-120 micron thick. All welding joints of pipe are robotic welded
with joints scalloped as necessary and dressed off removing sharp
edges and burrs. Zinc primer paint to be applied at all welding points
prior to finishing. Padals shall be made up of Nylon alloy with
rounded edge of prevent any impact of injury and seat to be made
from virgin LLDPE manufactured by rotational moulding with
minimum thickness of plastic 4.00mm, colourful and U V resistant
environmental friendly. Bearing used shall be maintenance free, duly
oiled sealed and self lubricated made by reputed company to be
approved by Officer-in-Charge. Equipment to be fitted within built
limiters to prevent unwanted movements. All open ends of pipe to be
coloured by GI/LLDPE caps for user safety. The equipment to be
fixed on ground with concrete of minimum strength M25 and J shaped
welded bolts and once the concrete is set, fix the equipment on to it
and cover nuts and bolts with the base plate cover, all complete as
per direction and approval of Engineer-in-Charge regarding material,
shape of equipment, colour on metal, seat and base cover plate and
fixing of equipment etc
NS-18 Arm and Shoulder Wheel Set 3.00 1,06,561.50 3,19,684.50
Road-69 Digitally signed by ARTI
Providing, and fixing Arm and Shoulder Wheel of size 1300 X 1200 X
1350 mm fabricated with main post of 140 mm dia and 2.5 mm thick
rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of
hot rolled tubular steel and hot dipped galvanized, and powder
coated using or equivalent of 80-120 micron thick. All welding joints
of pipe are robotic welded with joints scalloped as necessary and
dressed off removing sharp edges and burrs. Zinc primer paint to be
applied at all welding points prior to finishing. Padals shall be made
up of Nylon alloy with rounded edge of prevent any impact of injury
and seat to be made from virgin LLDPE manufactured by rotational
moulding with minimum thickness of plastic 4.00mm, colourful and U
V resistant environmental friendly. Bearing used shall be
maintenance free, duly oiled sealed and self lubricated made by
reputed company to be approved by Officer -in-Charge. Equipment to
be fitted within built limiters to prevent unwanted movements. All open
ends of pipe to be coloured by GI/LLDPE caps for user safety. The
equipment to be fixed on ground with concrete of minimum strength
M25 and J shaped welded bolts and once the concrete is set, fix the
equipment on to it and cover nuts and bolts with the base plate cover,
all complete as per direction and approval of Engineer-in-Charge
regarding material, shape of equipment, colour on metal, seat and
base cover plate and fixing of equipment etc.
NS-19 Double Cross Walker Set 3.00 1,09,099.70 3,27,299.09
Road-70 Digitally signed by ARTI
Providing, and fixing Double Cross Walker of size 1600 X 600 X
1600 mm fabricated with main post of 140 mm dia and 2.5 mm thick
rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up
of hot rolled tubular steel and hot dipped galvanized, and powder
coated using or equivalent of 80-120 micron thick. All welding joints
of pipe are robotic welded with joints scalloped as necessary and
dressed off removing sharp edges and burrs. Zinc primer paint to be
applied at all welding points prior to finishing. Padals shall be made
up of Nylon alloy with rounded edge of prevent any impact of injury
and seat to be made from virgin LLDPE manufactured by rotational
moulding with minimum thickness of plastic 4.00mm, colourful and U
V resistant environmental friendly. Bearing used shall be
maintenance free, duly oiled sealed and self lubricated made by
reputed company to be approved by Officer -in-Charge. Equipment to
be fitted within built limiters to prevent unwanted movements. All open
ends of pipe to be coloured by GI/LLDPE caps for user safety. The
equipment to be fixed on ground with concrete of minimum strength
M25 and J shaped welded bolts and once the concrete is set, fix the
equipment on to it and cover nuts and bolts with the base plate cover,
all complete as per direction and approval of Engineer-in-Charge
regarding material, shape of equipment, colour on metal, seat and
base cover plate and fixing of equipment etc.
Road-71 Digitally signed by ARTI
Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm
fabricated with main post of 114 mm dia and 2.5 mm thick rest of the
pipes are 40mm dia and 3.00 mm thick all pipes made up of hot rolled
tubular steel and hot dipped galvanized, and powder coated using
or equivalent of 80-120 micron thick. All welding joints of pipe are
robotic welded with joints scalloped as necessary and dressed off
removing sharp edges and burrs. Zinc primer paint to be applied at all
welding points prior to finishing. Padals shall be made up of Nylon
alloy with rounded edge of prevent any impact of injury and seat to be
made from virgin LLDPE manufactured by rotational moulding with
minimum thickness of plastic 4.00mm, colourful and U V resistant
environmental friendly. Bearing used shall be maintenance free, duly
oiled sealed and self lubricated made by reputed company to be
approved by Officer-in-Charge. Equipment to be fitted within built
limiters to prevent unwanted movements. All open ends of pipe to be
coloured by GI/LLDPE caps for user safety. The equipment to be
fixed on ground with concrete of minimum strength M25 and J shaped
welded bolts and once the concrete is set, fix the equipment on to it
and cover nuts and bolts with the base plate cover, all complete as
per direction and approval of Engineer-in-Charge regarding material,
shape of equipment, colour on metal, seat and base cover plate and
fixing of equipment etc.
NS-21 Elliptical Exerciser Set 3.00 1,15,093.25 3,45,279.74
Road-72 Digitally signed by ARTI
Providing, and fixing Elliptical Exerciser of size 1200 X 540 X 1600
mm fabricated with main post of 140 mm dia and 2.5 mm thick rest
of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot
rolled tubular steel and hot dipped galvanized, and powder coated
using of 80-120 micron thick. All welding joints of pipe are robotic
welded with joints scalloped as necessary and dressed off removing
sharp edges and burrs. Zinc primer paint to be applied at all welding
points prior to finishing. Padals shall be made up of Nylon alloy with
rounded edge of prevent any impact of injury and seat to be made
from virgin LLDPE manufactured by rotational moulding with
minimum thickness of plastic 4.00mm, colourful and U V resistant
environmental friendly. Bearing used shall be maintenance free, duly
oiled sealed and self lubricated made by reputed company to be
approved by Officer -in-Charge. Equipment to be fitted within built
limiters to prevent unwanted movements. All open ends of pipe to be
coloured by GI/LLDPE caps for user safety. The equipment to be
fixed on ground with concrete of minimum strength M25 and J shaped
welded bolts and once the concrete is set, fix the equipment on to it
and cover nuts and bolts with the base plate cover, all complete as
per direction and approval of Engineer-in-Charge regarding material,
shape of equipment, colour on metal, seat and base cover plate and
fixing of equipment etc.
Road-73 Digitally signed by ARTI
Providing, and fixing of airs winging pair of size 1150 x900 x1250
mm fabricated with main post of 114 mm dia and 3.00 mm thick rest
of the pipes are 40mm dia and 3.00 mm thick all pipes made up of
hot rolled tubular steel and hot dipped galvanized, and powder
coated using or equivalent of 80-120 micron thick. All welding joints
of pipe are robotic welded with joints scalloped as necessary and
dressed off removing sharp edges and burrs. Zinc primer paint to be
applied at all welding points prior to finishing. Seat and Base plate
cover shall be made up of virgin LLDPE manufactured by rotational
moulding with minimum thickness of plastic 4.00mm, colourful and U
V resistant environmental friendly. Bearing used shall be maintained
free, duly oiled sealed and self lubricated made by reputed company
to be approved by Officer-in-Charge. Equipment to be fitted within
built limiters to prevent unwanted movements. All open ends of pipe
to be coloured by GI/LLDPE caps for user safety. The equipment to
be fixed on ground with concrete of minimum strength M25 and J
shaped welded bolts and once the concrete is set, fix the equipment
on to it and cover nuts and bolts with the base plate cover, all
complete as per direction and approval of Engineer-in-Charge
regarding material, shape of equipment, colour on metal, seat and
base cover plate and fixing of equipment etc
Road-74 Digitally signed by ARTI
Providing, and fixing of Air-Walker of size 100 x 550 x 1480mm
fabricated with main post of 140 mm dia and 2.5 mm thick and other
pipes of 40 mm dia 2.5 mm thick made up of hot rolled tubular steel
and hot dipped galvanized, and powder coated 80-120 micron thick
using or equivalent in desired shade and colour. All welding joints of
pipe shall be robotic welded with joints scalloped as necessary and
dressed off removing sharp edges and burrs. Zinc primer paint to be
applied at all welding points prior to finishing. Base plate cover shall
be made up of virgin LLDPE plastic by rotational moulding with
minimum 4.00mm thickness U V resistant and colour as approved by
Officer -in Charge. High quality grip rubber should be used on
handles. Foothold shall be made of Nylon alloy with rounded edge to
prevent impact and injury. Maintenance free bearing should be used
in equipment manufactured by reputed company duly sealed and self
lubricated to be approved by Engineer in charge. Equipment to be
fitted with inbuilt limiters . The equipment should be fixed on ground
with concrete of minimum strength M25 and J shaped welded bolts
and when concrete is set, fixing the equipment on to it and cover nuts
and bolts with base plate cover, all complete as per direction and
approval of Engineer-in-Charge regarding material, shape of
equipment, colour (of metal, seat and pedal), and fixing of equipment
NS-24 Horse Rider Station Set 3.00 98,212.12 2,94,636.36
Road-75 Digitally signed by ARTI
Providing, and fixing of horse rider station of size 1000 x 600 x 1100
mm fabricated with main post of 140 mm dia and 2.5 mm thick rest
of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot
rolled tubular steel and hot dipped galvanized, and powder coated
using or equivalent of 80-120 micron thick. All welding joints of pipe
are robotic welded with joints scalloped as necessary and dressed off
removing sharp edges and burrs. Zinc primer paint to be applied at all
welding points prior to finishing. Padals shall be made up Nylon
alloy with rounded edge of prevent any impact of injury and seat to be
made from virgin LLDPE manufactured by rotational moulding with
minimum thickness of plastic 4.00mm, colourful and U V resistant
environmental friendly. Bearing used shall be maintenance free, duly
oiled sealed and self lubricated made by reputed company to be
approved by Engineer-in-Charge. Equipment to be fitted within built
limiters to prevent unwanted movements. All open ends of pipe to be
coloured by GI/LLDPE caps for user safety. The equipment to be
fixed on ground with concrete of minimum strength M25 and J shaped
welded bolts and once the concrete is set, fix the equipment on to it
and cover nuts and bolts with the base plate cover, all complete as
per direction and approval of Officer-in-Charge regarding material,
shape of equipment, colour on metal, seat and base cover plate and
fixing of equipment etc.
NS-25 Sit Up Station Set 3.00 84,348.03 2,53,044.10
Providing, and fixing of double sit-up station of size 1500 x 1150 x 650 mm
fabricated with main post of 140 mm dia and 2.5 mm thick rest of the pipes are
40mm dia and 3.00 mm thick all pipes made up of hot rolled tubular steel and hot
dipped galvanized, and powder coated using or equivalent of 80-120 micron
thick. All welding joints of pipe shall be robotic welded with joints scalloped as
necessary and dressed off removing sharp edges and burrs. Zinc primer paint to
be applied at all welding points prior to finishing. Seat and Base plate cover shall
be made up of virgin LLDPE plastic by rotational moulding with minimum thickness
of plastic 4.00mm, colourful and U V resistant environmental friendly. The
equipment should be fixed on ground with concrete of minimum strength M25 and J
shaped welded bolts and when concrete is set, fix the equipment on to it and cover
Road-76 Digitally signed by ARTI
shaped welded bolts and when concrete is set, fix the equipment on to it and cover
nuts and bolts with the base plate cover, all complete as per direction and approval
of Engineer-in-Charge regarding material, shape of equipment, colour (of metal,
seat and pedal), and fixing of equipment etc.
NS-26 Exercising Bar Set 3.00 1,19,541.48 3,58,624.45
Providing, and fixing Exercising Bar of Pull pair of size 1800 X 550 X 1700 mm
fabricated with main post of 140 mm dia and 2.5 mm thick rest of the pipes are
40mm dia and 3.00 mm thick all pipes made up of hot rolled tubular steel and hot
dipped galvanized, and powder coated using or equivalent of 80-120 micron
thick. All welding joints of pipe are robotic welded with joints scalloped as
necessary and dressed off removing sharp edges and burrs. Zinc primer paint to
be applied at all welding points prior to finishing. Padals shall be made up of
Nylon alloy with rounded edge of prevent any impact of injury and seat to be made
from virgin LLDPE manufactured by rotational moulding with minimum thickness of
plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used
shall be maintenance free, duly oiled sealed and self lubricated made by reputed
company to be approved by Officer-in-Charge. Equipment to be fitted within built
limiters to prevent unwanted movements. All open ends of pipe to be coloured by
GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete
of minimum strength M25 and J shaped welded bolts and once the concrete is set,
fix the equipment on to it and cover nuts and bolts with the base plate cover, all
complete as per direction and approval of Officer-in-Charge regarding material,
shape of equipment, colour on metal, seat and base cover plate and fixing of
NS-27 Seated Chest Press Set 3.00 1,27,006.76 3,81,020.29
Road-77 Digitally signed by ARTI
Providing, and fixing Seated Chest Press of size 1800 X 700 X 2000 mm
fabricated with main post of 114 mm dia and 2.5 mm thick rest of the pipes are
40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot
dipped galvanized, and powder coated using or equivalent of 80-120 micron
thick. All welding joints of pipe are robotic welded with joints scalloped as
necessary and dressed off removing sharp edges and burrs. Zinc primer paint to
be applied at all welding points prior to finishing. Padals shall be made up of
Nylon alloy with rounded edge of prevent any impact of injury and seat to be made
from virgin LLDPE manufactured by rotational moulding with minimum thickness of
plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used
shall be maintenance free, duly oiled sealed and self lubricated made by reputed
company to be approved by Officer-in-Charge. Equipment to be fitted within built
limiters to prevent unwanted movements. All open ends of pipe to be coloured by
GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete
of minimum strength M25 and J shaped welded bolts and once the concrete is set,
fix the equipment on to it and cover nuts and bolts with the base plate cover, all
complete as per direction and approval of Officer -in-Charge regarding material,
shape of equipment, colour on metal, seat and base cover plate and fixing of
Providing, and fixing Chin up Bar of size 2630 x 305 x 2640 mm fabricated with
main post of 114 mm dia and 2.5 mm thick rest of the pipes are 40mm dia and
2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped
galvanized, and powder coated using or equivalent of 80-120 micron thick. All
welding joints of pipe are robotic welded with joints scalloped as necessary and
dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all
Road-78 Digitally signed by ARTI
dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all
welding points prior to finishing. Padals shall be made up of Nylon alloy with
rounded edge of prevent any impact of injury and seat to be made from virgin
LLDPE manufactured by rotational moulding with minimum thickness of plastic
4.00mm, colourful and U V resistant environmental friendly. Bearing used shall
be maintenance free, duly oiled sealed and self lubricated made by reputed
company to be approved by Officer-in-Charge. Equipment to be fitted within built
limiters to prevent unwanted movements. All open ends of pipe to be coloured by
GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete
of minimum strength M25 and J shaped welded bolts and once the concrete is set,
fix the equipment on to it and cover nuts and bolts with the base plate cover, all
complete as per direction and approval of Engineer-in-Charge regarding material,
shape of equipment, colour on metal, seat and base cover plate and fixing of
NS-29 Stair Stepper Set 3.00 76,679.06 2,30,037.19
Providing, and fixing of stair stepper in a combination of pair and a single step of
size 1000 x 800 x 1400 mm fabricated with main post of 114 mm dia and 2.5 mm
thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot
rolled tubular steel and hot dipped galvanized, and powder coated using or
equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with
joints scalloped as necessary and dressed off removing sharp edges and burrs.
Zinc primer paint to be applied at all welding points prior to finishing. Padals shall
be made up of Nylon alloy with rounded edge of prevent any impact of injury and
seat to be made from virgin LLDPE manufactured by rotational moulding with
minimum thickness of plastic 4.00mm, colourful and U V resistant environmental
friendly. Bearing used shall be maintenance free, duly oiled sealed and self
lubricated made by reputed company to be approved by Engineer-in-Charge.
Equipment to be fitted within built limiters to prevent unwanted movements. All
open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment
to be fixed on ground with concrete of minimum strength M25 and J shaped
welded bolts and once the concrete is set, fix the equipment on to it and cover nuts
and bolts with the base plate cover, all complete as per direction and approval of
Officer -in-Charge regarding material, shape of equipment, colour on metal, seat
and base cover plate and fixing of equipment etc.
Providing, and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm main post
of 114 mm dia and 2.5 mm thick rest of the pipes are 40mm dia and 2.5 mm thick
all pipes made up of hot rolled tubular steel and hot dipped galvanized, and
Road-79 Digitally signed by ARTI
all pipes made up of hot rolled tubular steel and hot dipped galvanized, and
powder coated using or equivalent of 80-120 micron thick. All welding joints of
pipe are robotic welded with joints scalloped as necessary and dressed off
removing sharp edges and burrs. Zinc primer paint to be applied at all welding
points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge
of prevent any impact of injury and seat to be made from virgin LLDPE
manufactured by rotational moulding with minimum thickness of plastic 4.00mm,
colourful and U V resistant environmental friendly. Bearing used shall be
maintenance free, duly oiled sealed and self lubricated made by reputed company
to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to
prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE
caps for user safety. The equipment to be fixed on ground with concrete of
minimum strength M25 and J shaped welded bolts and once the concrete is set, fix
the equipment on to it and cover nuts and bolts with the base plate cover, all
complete as per direction and approval of Officer-in-Charge regarding material,
shape of equipment, colour on metal, seat and base cover plate and fixing of
NS-31 Rowing Machine Set 3.00 1,04,407.24 3,13,221.71
Providing, and fixing Rowing Machine of size 1280 X 800 X 1500 mm main post
of 140 mm dia and 2.5 mm thick rest of the pipes are 40mm dia and 2.5 mm thick
all pipes made up of hot rolled tubular steel and hot dipped galvanized, and
powder coated using or equivalent of 80-120 micron thick. All welding joints of
pipe are robotic welded with joints scalloped as necessary and dressed off
Road-80 Digitally signed by ARTI
pipe are robotic welded with joints scalloped as necessary and dressed off
removing sharp edges and burrs. Zinc primer paint to be applied at all welding
points prior to finishing. Padals shall be made up of Nylon alloy with rounded
edge of prevent any impact of injury and seat to be made from virgin LLDPE
manufactured by rotational moulding with minimum thickness of plastic 4.00mm,
colourful and U V resistant environmental friendly. Bearing used shall be
maintenance free, duly oiled sealed and self lubricated made by reputed company
to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to
prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE
caps for user safety. The equipment to be fixed on ground with concrete of
minimum strength M25 and J shaped welded bolts and once the concrete is set, fix
the equipment on to it and cover nuts and bolts with the base plate cover, all
complete as per direction and approval of Officer-in-Charge regarding material,
shape of equipment, colour on metal, seat and base cover plate and fixing of
Providing, and fixing Twister of size 1700 X 1300 X 1300 mm main post of 114
mm dia and 2.5 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes
made up of hot rolled tubular steel and hot dipped galvanized, and powder coated
using or equivalent of 80-120 micron thick. All welding joints of pipe are robotic
welded with joints scalloped as necessary and dressed off removing sharp edges
and burrs. Zinc primer paint to be applied at all welding points prior to finishing.
Padals shall be made up of Nylon alloy with rounded edge of prevent any impact
of injury and seat to be made from virgin LLDPE manufactured by rotational
moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant
environmental friendly. Bearing used shall be maintenance free, duly oiled sealed
and self lubricated made by reputed company to be approved by Officer-in-Charge.
Equipment to be fitted within built limiters to prevent unwanted movements. All
open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment
to be fixed on ground with concrete of minimum strength M25 and J shaped
welded bolts and once the concrete is set, fix the equipment on to it and cover nuts
and bolts with the base plate cover, all complete as per direction and approval of
Officer -in-Charge regarding material, shape of equipment, colour on metal, seat
and base cover plate and fixing of equipment etc.
TOTAL OF NON-SCHEDULE ITEMS 307,77,386.14
Road-81 Digitally signed by ARTI
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at
RLBCAU at Datia.”
DETAILED ESTIMATE EXTERNAL PLUMBING WORKS
DSR 2023 DESCRIPTION OF ITEMS UNIT QTY QTY for 2 RATE DSR AMOUNT
/MR Nos. DSR MR
BOREWELL (2 NOS.)
23.1 Boring/drilling bore well of required dia for casing/ strainer
pipe, by suitable method prescribed in IS: 2800 (part I),
including collecting samples from different strata, preparing
and submitting strata chart/ bore log, including hire &
running charges of all equipments, tools, plants &
machineries required for the job, all complete as per
direction of Engineer -in-charge, up to 90 metre depth
below ground level.
23.1.1 All Types of Soil
23.2 Boring/drilling bore well of required dia for casing/ strainer
pipe, by suitable method prescribed in IS: 2800 (part I),
including collecting samples from different strata, preparing
and submitting strata chart/ bore log, including hire &
running charges of all equipments, tools, plants &
machineries required for the job, all complete as per
direction of Engineer -in-charge, beyond 90 metre & upto
150 metre depth below ground level.
23.2.1 All Types of Soil
Digitally signed by ARTI
23.3 Supplying, assembling, lowering and fixing in vertical
position in bore well, unplasticized PVC medium well casing
(CM) pipe of required dia, conforming to IS: 12818, including
required hire and labour charges, fittings & accessories etc.
all complete, for all depths, as per direction of Engineer -in-
23.4 Supplying, assembling, lowering and fixing in vertical
position in bore well unplasticized PVC medium well screen
(RMS) pipes with ribs, conforming to IS: 12818, including
hire & labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of Engineer-in-
23.8 Gravel packing in tubewell construction in accordance with cum 15 30 2024.5 60735.00 0.00
IS: 4097, including providing gravel fine/ medium/ coarse, in
required grading & sizes as per actual requirement, all
complete as per direction of Engineer-in-charge.
23.12 Development of tube well in accordance with IS : 2800 (part Hr. 100 200 1085.05 217010.00 0.00
I) and IS: 11189, to establish maximum rate of usable water
yield without sand content (beyond permissible limit), with
required capacity air compressor, running the compressor
for required time till well is fully developed, measuring yield
23.13 Providing and fixing suitable size threaded mild steel cap or
spot welded plate to the top of bore well housing/ casing
pipe, removable as per requirement, all complete for
Digitally signed by ARTI
23.14 Providing and fixing M.S. clamp of required dia to the top of
casing/ housing pipe of tubewell as per IS: 2800 (part I),
including necessary bolts & nuts of required size complete.
23.15 Providing and fixing Bail plug/ Bottom plug of required dia to
the bottom of pipe assembly of tubewell as per IS:2800
Scheduled Item - Total 6,61,656.80
Non scheduled item
NR Self-priming close-coupled centrifugal pumps with built-in each 1 1 64,005.86 64005.86
ejector system, coupled with a Asynchronous, squirrel cage
rotor, IE2 efficiency class , enclosed construction in
aluminum casing, external ventilation, Protection: IP55. /
415 or 230 V / 50 Hz, Class 155 (F) insulation. Performances
according to EN 60034-1. ,Maximum ambient temperature:
40°C. , (- Single-phase version: 220-240 V 50 Hz, 2 poles with
built-in automatic reset overload protection. Three-phase
version: 220-240/380-415 V 50 Hz), with SS body , SS 304
impeller & with fill & drain plug , with mechnical seal
complying to Mechanical seal with mounting dimensions
according to EN12756
Non- Scheduled Item - Total 64,005.86
Total Sch+Non sch 725662.66
Digitally signed by ARTI
NBCC (INDIA) LTD
NAME OF THE PROJECT: Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary
and Animal Science and college of Fisheries at RLBCAU at Datia.”
DSR 2023 DSR 2023
Description of item UNIT Quantiy AMOUNT (RS.)
Code No. RATE (RS.)
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m in
width or 10 sqm on plan), including dressing of sides and ramming of
2.8 bottoms, lift upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a lead of 50 m.
Providing and laying in position cement concrete of specified grade
4.1 excluding the cost of centering and shuttering - All work up to plinth
"1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone
4.1.3 aggregate 20 mm nominal size). cum 8.80 7878.50 69330.80
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40
Centering and shuttering including strutting, propping etc. and removal of
4.3 form work for :
4.3.1 Foundations, footings, bases for columns Sqm 308.00 392.15 120782.20
Retaining walls, return walls, walls (any thickness) including
attached pilasters, buttresses, plinth and string courses fillets,
4.3.2 kerbs and steps etc. Sqm 2424.00 842.50 2042220.00
Providing and laying in position specified grade of reinforced cement
concrete, excluding the cost of centering, shuttering, finishing and
5.1 reinforcement - All work up to plinth level :
Digitally signed by ARTI
DSR 2023 DSR 2023
Description of item UNIT Quantiy AMOUNT (RS.)
1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4
graded stone aggregate 20 mm nominal size derived from natural sources)
Steel reinforcement for R.C.C. work including straightening, cutting,
5.22 bending, placing in position and binding all complete upto plinth level
Thermo-Mechanically Treated bars of grade Fe-500D or more.
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat
13.9 of neat cement.
Providing and placing in position 100 mm thick factory made machine
batched & machine mixed Precast RCC Rectangular Covers on drains of
footpath of various sizes, of M-25 grade cement concrete for RCC work,
including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars
of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement
16.93 punning on finished surface, properly encased on all edges with 1.6 mm Sqm 1032.00 3081.95 3180572.40
thick , 100 mm wide MS sheet duly painted over priming coat ,
reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12
mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site
etc. all complete as per direction of Engineer-in-Charge.
TOTAL OF STORM WATER DRAIN WORK 93,81,524.82
Digitally signed by ARTI
NBCC INDIA LIMITED
NAME OF THE PROJECT: CONSTRUCTION OF SPORTS COMPLEX AND SPORTS GROUND FACILITIES (PHASE-II) AT RLBCAU CAMPUS DATIA, MADHYA
GENERAL ABSTRACT OF COST - ELECTRICAL WORKS FOR SPORTS COMPLEX AND EXTERNAL PART
DESCRIPTION DSR AMOUNT (RS.) NS AMOUNT (RS.)
SUB HEAD-I:CIRCUIT CUM POINT WRING. 12,11,808.89 -
SUB HEAD-II - FITTINGS & FIXTURES AND POLES. - 132,65,197.00
SUB HEAD-III - DISTRIBUTION BOARDS 73,177.37 -
SUB HEAD-IV -CABLE TRAYS. 39,044.38 -
SUB HEAD-V - EARTHING 4,56,469.37 -
SUB HEAD-VI - L.T. CABLES 15,07,249.02 10,55,610.00
SUB HEAD-VII:- LT PANEL - 7,21,958.00
SUB HEAD-VIII :SPLIT A C. - 3,06,904.00
Digitally signed by ARTI
NBCC INDIA LIMITED.
Construction of Sports Complex and sport ground facilities (Phase-ll) for college of Veterinary and Animal Science and college of Fisheries at RLBCAU at Datia.”
ESTIMATE - ELECTRICAL WORKS.
DSR-2022 Unit Qty DSR-2022 DSR-2022 rate NS Rate (Rs.) DSR-2022 Amount NS Amount (Rs)
RATE (Rs.) including (Rs)
Description of items
SUB HEAD-I: CIRCUIT CUM POINT WRING.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single
core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(Switch Control Primary Points)
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without Independent switch etc.)
with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the
point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required.(Switch Control Secondary Points)
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel
conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single
DSR 1.7 core cable in surface/ recessed steel conduit as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and
DSR 1.31 fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Each 15 477.00 507.19 7,607.91
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and
DSR 1.32 fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 15 586.00 623.09 9,346.41
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess i/c providing and fixing 25
amp modular socket outlet and 25 Amps modular SP MCB, “C” curve including connection, painting etc. as required. ( Gysers /
Supplying and fixing following modular switch & socket on existing modular base & switch box including connection but
DSR 1.24 excluding modular plate etc. as required.
DSR 1.24.4 3 pin , 5/6 amps socket outlet Each 20 122.00 129.72 2,594.45
DSR 1.24.5 6 pin , 15/16 amps socket outlet Each 20 197.00 209.47 4,189.40
Supplying and fixing of following sizes of of steel conduit along accessories in surface / recess including painting in case of
DSR 1.20 surface conduit, or cutting the making good the same in case of recessed as required.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting
the wall and making good the same in case of recessed
DSR 1.21 conduit as required.
Digitally signed by ARTI
ESTIMATE - ELECTRICAL WORKS.
DSR-2022 Unit Qty DSR-2022 DSR-2022 rate NS Rate (Rs.) DSR-2022 Amount NS Amount (Rs)
RATE (Rs.) including (Rs)
Description of items
Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/
DSR 1.17 recessed steel/ PVC conduit as required.
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in
DSR 1.18 the existing surface/ recessed steel/ PVC conduit as required.
Supplying and fixing following size / modules ,G I box alongwith modular base & cover plate for modular switches in recess etc.
DSR 1.27 as required.
Supplying and fixing following modular base & cover on existing on existing modular boxes etc. as required.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current
(BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper
winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM
(tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining
accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2
mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including
DSR 1.25 connections but excluding modular plate etc. as required. Each 10 369.00 392.36 3,923.58
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc.
Total of Sub-Head - I carried to summary 12,11,808.89 -
NSI-1 SUB HEAD-II - FITTINGS , FIXTURES AND POLES.
SITC of LED floodlight fixture with Pressure Die-cast aluminium housing high quality integrated LED Luminaire. LED Floodlight
fixture, rated wattage of 200W, system efficacy>120lm/watt, system lumen: 24000lm, The luminaire should be of Class B
Serviceability. Luminaire comes with toughend glass cover with LED lens for WB & NB photometry, The LED used in the
luminaire shall be SMD type only . IP66 & IK07, SDCM<5, THD<10%, CRI>70 & CCT: 5700K, Protection Class I, Operating temp: +0
to 50 degree C, Ambient temp.: 35Deg. C, Operating voltage of 140-270V (AC) at 50Hz, LED Life(L70B50): 50,000hrs, Inbuilt surge
protection of 4KV & External SPD rating of 10KV, Power factor(pf)>0.95, Potted Driver with LED Driver efficacy>85%, complied
with IEC 60598, Driver meets IEC61347 & BIS. The luminaire should have Integrated optics to provide a high quality glare free
lighting system, Light fixture with HV/LV cut-off options, as required .
SITC of LED indoor surface downlighter suitable for general lighting. Luminaire should have pressure die-cast Al housing with
diffused optics. The luminaire should have CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20, IK02
classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of
2150 lumens and maximum system wattage of 18 Watts, ambient temp 45 deg C. The electronic driver used shall have a power
factor >0.95 , THD <10%. The fixture housing should be available in colors aluminium and grey. Luminaire manufacture shall
provide LM79 report from NABL/UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and Driver
should be of same make & must have separate BIS approval. as required .
Digitally signed by ARTI
ESTIMATE - ELECTRICAL WORKS.
DSR-2022 Unit Qty DSR-2022 DSR-2022 rate NS Rate (Rs.) DSR-2022 Amount NS Amount (Rs)
RATE (Rs.) including (Rs)
Description of items
SITC OF Surface mounted 2X2 LED panel ,made of CRCA housing with high efficiency opal Diffuser. LED Used shall be SMD type
and fixture should have minimum efficacy at System level >=120 lumens/watt with Minimum system Lumens 4200 & Max
System wattage of 35W, Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM<=5), CRI Ra
>=80, PF >0.95, an operating Voltage Range of 220 - 240 V. Manufacturer shall have inhouse lab approved by NABL . LM 79 and
LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver
should have separate BIS approval. as required .
SITC of LED Bed/Mirror batten light of 2ft length with a system wattage of 10W with a nominal system lumen output of 1000-
1500 lumens and a minimum system efficacy of 100lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded
aluminimum with powder coating & with IP20 protection. The luminaire shall meet IP20 rating with THD≤20% and PF ≥ 0.90.
The luminiare manufacturer shall provide LM79 report from NABL accrediated lab & LM80 report issued by LED manufacturer.
NSI-1.4 as required . Each 5 548.00 2,740.00
SITC of 10 w LED Bulkhead with a nominal system lumen output of 1000 lumens and a minimum system efficacy of 100 lm/W.
The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature
of 5700K and CRI > 80. The luminaire shall meet IP65 rating and IK 08 rating with THD < 20% and PF > 0.9. The luminaire housing
should made of pressure die cast Aluminium with polycarbonate front diffuser. The total power consumption should not exceed
NSI-1.5 6.5W (including driver). as required Each 5 1,753.00 8,765.00
SITC of Architectural bollard LED 3000K 230-240V 50-60Hz CRI > 80 Input power: 8W Height 800mm, Electronic driver ON/OFF
CE and RoHS compliance TYPE: Bollard, IP rating IP65, impact resistance IK10. MATERIAL CHARACTERISTICS : Extruded
aluminium bottom pipe Ø100 x H800mm with polycarbonate diffuser and integral base plate Ø180 with PG gland. Luminaire
contains built in LED modules. Operating ambient temperature range is from -20°C to +40°C. Lumen output 300 lm, light source
96 power LEDs. Resistance to heat and force for plasticpart should be 850 degree celcius. Housing Color Dark grey RAL 7043.
CCE, CE and RoHS compliance. Manufacturer shall have inhouse lab approved by NABL . LM 79 and LM80 reports need to be
NSI-1.6 submitted. as required . Each 12 6,603.00 79,236.00
SITC of Specially designed step light LED 3000K 220-240V CRI > 80 Input power: 2-3W Dimension 145mm x 145mm x 103mm
Electronic driver ON/OFF CE mark. IP rating IP67 and impact resistance IK08. Material Characteristics metal and plastic housing
with polycarbonate UV-resistant optical cover, aluminum and white color. Operating ambient temperature range is from -20°C
to +40°C. as required.
SITC of 25m height including headframe highmast with materials: shaft : S355 as per BSEN 10025, Door & Flange : as per IS :
2062, Hot Dip Galvanized to BSEN 1461 Finish, Max. Wind Speed : 47 m/sec. as per IS : 875, Welding : submerged arc welding for
shaft, foundation bolts shall be of TS 600 Grade confirming to IS : 1367 Part III, There shall be one or more longitudinal welds
depending on the availability of sheet, Mast shall be suitable to mount minumum 27 nos flood light, maintainance of
headframe will be through man rider.( Payment of Fixtures will be paid separately).
Digitally signed by ARTI
ESTIMATE - ELECTRICAL WORKS.
DSR-2022 Unit Qty DSR-2022 DSR-2022 rate NS Rate (Rs.) DSR-2022 Amount NS Amount (Rs)
RATE (Rs.) including (Rs)
Description of items
Supply of high-quality integrated LED Flood Light with a minimum system lumen of 60000 Lm and system wattage not
exceeding 470W with a nominal efficiency 130lumen/watt. CCT of 5700K with SDCM of < 5 and CRI : 70. The housing should be
of non-corrosive high-pressure die-cast aluminum to with stand extreme environments. It should have corrosion resistant
powder coating to pass NSS of 500 Hrs. with PF > 0.95. Lifetime of 50K hours @L70. Product should be suitable for continuous
operation (10-12 Hrs. per day). Product shall have NB optics and Ingress protection should be minimum IP 66 with an IK rating of
08. Optical and control gear compartments shall be maintainable/replaceable without impacting the LED units. The access to
the optical and the gear compartment should be separate. While accessing the gear compartment, the optical compartment
should not be accessible. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the Luminaire . The SPD should be able
to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The Luminaire
should have a breather to ensure that air balance inside and outside of the Compartment .The luminaire should be of Class B
Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED
chip with ceramic based suitable for outdoor use is allowed. Multi Chip , array multi die , mid power ,Integrated arrays and
COB’s are not permitted. The 144 nos of High power LED used in the luminaire shall be SMD type only of make LGIT, Lumileds,
Osram, Nichia, and CREE & no other make. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs.,
should have an auto shutdown @ 325V and have an auto recovery feature. The Drivers should be a potted driver not a printed
circuit board without casing, mounted inside the luminaire. The Dimension of the luminaires should be minimum 595 x 100 x418
mm and have a breather ensuring a stable optical and thermal management. The weight of the luminaire should not be more
than 12 Kg and shall be similar to,as required.
SITC of high-quality integrated LED Flood Light with a minimum system lumen of 60000 Lm and system wattage not exceeding
450W with a nominal efficiency 135lumen/watt. CCT of 5700K with SDCM of < 5 and CRI : 70. The housing should be of non-
corrosive high-pressure die-cast aluminum to with stand extreme environments. It should have corrosion resistant powder
coating to pass NSS of 500 Hrs. with PF > 0.95. Lifetime of 50K hours @L70. Product should be suitable for continuous operation
(10-12 Hrs. per day). Product shall have NB optics and Ingress protection should be minimum IP 66 with an IK rating of 08.
Optical and control gear compartments shall be maintainable/replaceable without impacting the LED units. The access to the
optical and the gear compartment should be separate. While accessing the gear compartment, the optical compartment should
not be accessible. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the Luminaire . The SPD should be able to
sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The Luminaire
should have a breather to ensure that air balance inside and outside of the Compartment .The luminaire should be of Class B
Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED
chip with ceramic based suitable for outdoor use is allowed. Multi Chip , array multi die , mid power ,Integrated arrays and
COB’s are not permitted. The 144 nos of High power LED used in the luminaire shall be SMD type only of make LGIT, Lumileds,
Osram, Nichia, and CREE & no other make. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs.,
should have an auto shutdown @ 325V and have an auto recovery feature. The Drivers should be a potted driver not a printed
circuit board without casing, mounted inside the luminaire. The Dimension of the luminaires should be minimum 595 x 100 x418
mm and have a breather ensuring a stable optical and thermal management. The weight of the luminaire should not be more
than 12 Kg ,as required .
Supply and Installation of 5m Conical Pole with single arm. Material for pole section: Hot rolled product of non alloy structural
steel grade S355, Other parts: MS as per IS 2062. Material as per BS EN 10025 equivalant to Indian standard.. Bottom (O.A.F.)
130mm and top (O.A.F.) 70mm. Size of Base Plate: 220 SQ, thickness of base plate should be minimum 12mm, hole PCD 220,
Fdn. bolt of M16. Tolerance on material thickness as per IS:1852/85. Pole shall be hot dip galvanized as per IS: 2629. 5mtr.
octagonal pole with single arm of 500mm length and 48.3mm dia .as required .
Digitally signed by ARTI
ESTIMATE - ELECTRICAL WORKS.
DSR-2022 Unit Qty DSR-2022 DSR-2022 rate NS Rate (Rs.) DSR-2022 Amount NS Amount (Rs)
RATE (Rs.) including (Rs)
Description of items
SITC of LED Street Light fixture single Piece Pressure Die Cast Aluminium Housing high quality integrated LED Luminaire. rated
wattage of 30W, system efficacy>120lm/watt, system lumen: 3600lm, The luminaire should be of Class B Serviceability. The LED
used in the luminaire shall be SMD type only . IP66 & IK07, SDCM<5, THD<10%, CRI>70 & CCT: 5700K, Protection Class I,
Operating temp: +0 to 50 degree C, Ambient temp.: 35Deg. C, Operating voltage of 140-270V (AC) at 50Hz, LED Life(L70B50):
50,000hrs, Inbuilt surge protection of 4KV & External SPD rating of 10KV, Power factor(pf)>0.95, LED Driver efficacy>85%,
complied with IEC 60598, Driver meets IEC61347 & BIS. The luminaire should have Integrated optics to provide a high quality
glare free lighting system, Light fixture with HV/LV cut-off options. as required .
Supplying of HD Metal Exhaust Fan heavy duty 230V A.C 50 cycles, 300 mm sweep, 900 rpm, energy efficient, complete
NSI-2 erected in position with all accessories, as per specification. Each 8 4,592.00 36,736.00
NSI-3 SITC of heavy duty 450mm Wall Fan each 12 6,443.00 77,316.00
Total of Sub-Head - II carried to summary. - 132,65,197.00
SUB HEAD-III - DISTRIBUTION BOARDS
Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess
complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized
and powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and
DSR 2.12 commissioning etc. as required.
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and
DSR 2.13 commissioning etc. as required.
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),
having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc.
DSR 2.14 asrequired.
Total of Sub-Head - III carried to summary . 73,177.37 -
SUB HEAD-IV - CABLE TRAYS .
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforations not more than 17.5%, in
convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting
DSR 4.1 suspenders etc as required.
DSR.4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness mtr. 20 543.00 577.37 11,547.44
DSR.4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness mtr. 20 604.00 642.23 12,844.66
DSR.4.1.3 200 mm width X 50 mm depth X 1.6 mm thickness mtr. 20 689.00 732.61 14,652.27
Total of Sub-Head - IV carried to summary . 39044.376 -
SUB HEAD-V - EARTHING
Earthing with G.I.earth pipe 4.5 meter long , 40mm dia including accessories, and providing masonary enclosure with cover
DSR 5.2 plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. Sets 15 6855 7288.92 109333.82
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with
cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required.
Digitally signed by ARTI
ESTIMATE - ELECTRICAL WORKS.
DSR-2022 Unit Qty DSR-2022 DSR-2022 rate NS Rate (Rs.) DSR-2022 Amount NS Amount (Rs)
RATE (Rs.) including (Rs)
Description of items
Earthing with Copper earth Plate 600mm x 600mm x 3mm thick including accesssories, and providing masonary enclosure
with cover plate (CI heavy duty) having locking arrangement and watering pipe pipe of 2.7 mtr long etc. with charcoal or coke
DSR 5.6 and salt) as required. Sets 1 13838.00 14,713.95 14,713.95
Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode, including connection with G.I. nut,
DSR 5.11 bolt, spring, washer excavation and refilling etc. as required. Mtr 30 706.00 750.69 22,520.69
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 2 nos used for 50 x 5 for
DSR-5.14 the Neutral earthing of euipments ) Mtr 30 1,162.00 1,235.55 37,066.64
DSR 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Mtr 80 244.00 259.45 20,755.62
DSR 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. Mtr 3280 70.00 74.43 2,44,133.68
Total of Sub-Head - V carried to summary. 4,56,469.37 -
SUB HEAD-VI - L.T. CABLES.
Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables
NSI-4 conforming to relevant IS-7098 Code and technical specifications.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size the existing RCC /
HUME / METAL pipe as required.
DSR-7.5.2 Above 35 sq. mm and upto 95 sq mm. Mtr. 600 57.00 60.61 36,364.86
DSR-7.5.3 Above 95 sq. mm and upto 185 sq mm. Mtr. 600 77.00 81.87 49,124.46
Supplying and drawing of UTG 4 pair CAT 6 LAN Cable in the existing surface/recessed steel/PVC conduit as required.
Supply and laying of following size DWC HDPE pipe ISI marked along with accessories like soceket , bend couplers etc.
confroming to IS 14930 , Part II complete with fitting and cutting , jointing etc. direct in ground ( 75 cm below ground level )
incduding excavation and refilling the trench but excluding sand cushionig and protective covering etc., complete as required.
Providing , laying and fixing following dia RCC pipe NP2 class ( light duty ) in ground complete with RCC collars , jointing with
cement mortar 1:2 ( 1 cement : 2 fine sand ) including trenching (75 mm deep) and refilling etc as required.
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and
PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade
DSR-9.1 as required.
Total of Sub-Head - VI carried to summary sheet. 15,07,249.02 10,55,610.00
NS-5 SUB HEAD-VII: L T PANEL
FRONT OPERATED PANEL
FRONT OPERATED PANEL
Digitally signed by ARTI
ESTIMATE - ELECTRICAL WORKS.
DSR-2022 Unit Qty DSR-2022 DSR-2022 rate NS Rate (Rs.) DSR-2022 Amount NS Amount (Rs)
RATE (Rs.) including (Rs)
Description of items
Supply, installation, testing and commissioning of front operated, front access, totally enclosed, free standing, dust and vermin
proof Panel with IP65 ingress protection, fabricated from 2 mm thick CRCA sheets, with hinged, gasketted and lockable doors
including the cost of interconnections, copper crimping lugs, brass glands, bonding to earth and painting, suitable for use at 415
volts, 3 phase 4 wire 50 Hz system with 31 MVA rupturing capacity at 415 volts complete as per specifications, as required and
External lighting Feeder piller
1 No. 40A,4P MCCB (25kA) and ON/OFF indicating lamps.
1 No. 40A, 3 phase Timer Switch for automatic operation.
B METERING & INDICATION
i) 1 set of R,Y,B phase indicating lamps.
ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB.
iii) 1 No. (0-40A) Ammeter with ASS with 3 nos. 160/5A CT's.
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves.
NS-5.2 M V PANEL FOR SPORT COMPLEX.
Supply, installation, testing and commissioning of front operated, front access, totally enclosed, free standing, dust and vermin
proof Panel with IP65 ingress protection, fabricated from 2 mm thick CRCA sheets, with hinged, gasketted and lockable doors
including the cost of interconnections, copper crimping lugs, brass glands, bonding to earth and painting, suitable for use at 415
volts, 3 phase 4 wire 50 Hz system with 31 MVA rupturing capacity at 415 volts complete as per specifications, as required and
A INCOMER FROM EXISTING MAIN LT PANEL
1 Nos. of 200A, 4P MOTORISED type MCCB with Ics=Ics=50KA having Mircroprocessor based releases for O/L, S/C & E/F
1 Nos. SPD Type 1
1 Sets - digital multifunction meter (showing harmonics along with all other electrical parameters such as voltage, current, Hz,
KW, KWHr, PF.) with RS 485 port with matching cast resin CT's
1 Sets - 0-500V, digital Voltmeter with selector switch, 3 No. phase indicating LED lamp to show the incoming power with
control SP MCB.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-250A) Ammeter with ASS with 3 nos. 300/5A CT's
1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves
i) 1 No. 63A 4P MCB (25 KA)
NSI-5.3 M V PANEL FOR BASKETBALL & FOOTBALL GROUND.
Supply, installation, testing and commissioning of front operated, front access, totally enclosed, free standing, dust and vermin
proof Panel with IP65 ingress protection, fabricated from 2 mm thick CRCA sheets, with hinged, gasketted and lockable doors
including the cost of interconnections, copper crimping lugs, brass glands, bonding to earth and painting, suitable for use at 415
volts, 3 phase 4 wire 50 Hz system with 31 MVA rupturing capacity at 415 volts complete as per specifications, as required and
INCOMER FROM EXISTING MAIN LT PANEL
1 Nos. of 250A, 4P electrically operated Drawout type MCCB with Ics=Ics=50KA having Mircroprocessor based releases for O/L,
S/C & E/F protection.
1 Nos. SPD Type 1
1 Sets - digital multifunction meter (showing harmonics along with all other electrical parameters such as voltage, current, Hz,
KW, KWHr, PF.) with RS 485 port with matching cast resin CT's
Digitally signed by ARTI
NS-6.7NS-6.6 6.5NS NS-6.2NS-6.1 NS-6 DSR-2022
SupplySupply |Installation
|Supply |Supply lequipped PCB. row with each Sub-Head Total|oUTGOINGS
sealedSupplying |4 No. 4 BUS-BAR 1 INDICATION
1METERING |control
Set No. No. 1set l Sets
of Machines deep fan
comprising of (0-500V)
& of & and and of inverter of40A 63A 375A R,Y,B 0-500V,
Sub-Head Installation
Refrigerant evaporating
installation of 1.5 ofSub-Head - 4P 4P
BEE VIII MCCB MCCB TPN phase
1.5 Ton synthetic
should Voltmeter
Ammeter digital
rotary certified
coil an (25 (25 indicating
Vil TOP of (5
star have ofunits outdoor
compressor Vil - Voltmeter
voltage ODU of ofstar copper
fibre AC. KA) KA) with with
carried refrigerant
UP power rating) shall 5-Star carried
STAND LCD (SPARE)
rating) filter, Bus ASS lamps
Stabil1zer cable Display consist
tube unit, with
Split Rated Bar
to (Acoustic and to with
summary between
copper Split ACInsulated with summary with VSS selector
Remote Inverted
AC aluminium a colour
drain 300/5A switch,
IDU section hi 3
sheet and wall Hi- sheet coded nos.
and with pan should Wall Description
ISEER fins, mounted CT's 2A 3
ODU inclusive with PVC No.
dynamically Sleeves MCB phase
be of indicating
not conditioning
expansion unit.
than Condensing LED
3.98. centrifugal and unit
Refrigerant air unit rated
compressor etc. show
the cooled voltage
evaporatingdriven the
will 100% be incoming
and 230v/52Hz/Single
B32/R410A5years ESTIMATE
condenser with
heretically with -
multi phase ELECTRICAL
nos nos mtr nos nos
@6.33%)including
Digitally signed by A
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
Sports datia NIT.pdf
Tender Document
List of makes-DATIA.pdf
Tender Document
Technical Specs.pdf
Tender Document
sports drg.pdf
Tender Document
Milestone sports works.pdf
Tender Document
SCC sports.pdf
Tender Document
GCC 2022 with amendment 1 to 10.pdf
Tender Document
soil investigation.pdf
Tender Document
IP.pdf
Tender Document
BOQ sport0209me.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .