Renovation of Side protection wall of Lankeswaram kulam in chittur-Thathamangalam municpality in Palakkad District-Phase-II

Amount

Desilting and renovation of pond and construction of protection Wall

2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.33.1 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

od28052/2020_2021/IA : Earth work excavation in all class of soil as per item No 2.6.1, the earth conveyed from site by contractor.

60.2.2 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

4.3.2 : Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

60.7.8 : DR with Departmental. Stone - DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course using departmental rubble including packing to compactness to lines and levels, labour charges etc. complete as per direction of Departmental officers at site

od27527/2020_2021/IA : od59934/2019_2020/IA :Supplying and installation of Water scale (ISA65X65X6) by connecting three bars ofGI Pipe of 50mm ,in builted into 60X60X40 CC of 1:3:6 in water body for measuring of water level and fixingdisplay board of size 100X70 cm supported on 50mm GI Pipe which is in built at 45X45X60 concrete block of1:3:6 near pond to calculate volume of water, as per departmental officer's at site.Earth work- 60X60X40cm0.6*0.6*0.4=0.144 say 0.150.45*0.45*0.6=0.1215,say 0.15total =0.3 cumconcrete 1:3:6=0.15+0.15=0.3GI Pipe for supporting member L=0.3+0.9+1.05+1.05=3.3add 5% wastage=0.163total L=3.465 say 3.5 and0.2+1.00+0.7=1.9,add 5% wastage 0.095,total=1.995,say 2mnet total=3.5+2=5.5for 25mm GI pipe,Q=1+1+0.7+0.7=3.4,add 5% wastage=0.17,total=3.57,say 4mGalvanised steel plain sheet (18 guage)size of sheet 1.00X0.7volume of 18 guage GI sheet 10.5 kg/sqm)volume=1.00*0.7*10.5 kg/sqm)=7.35,add 5% wastage=0.37,total=7.72,say 7.8 kgMS angle 65X65X6mmQ=2m,add 5% wastage =0.1m,total=2.1mwt of 6mm MS angle =5.95kg/m,total=5.95*2.1=12.495,say12.5kgPainting:-GI pipe 50mm (3.3*22/7*0.0483=0.5 sqm),area of angle iron=4*0.65*2=5.2,total=0.5+5.2=5.7 say 6 sqmGI pipe 50mm, (1.9*22/7*0.0483=0.29 sqm)GI pipoe 25mm (3.4*22/7*0.0483=0.52 sqm)GI sheet 18 guage(2*1*0.7*1=1.4 sqm

JAMES P J

Bidder Name

A.SURESH

JAMES P J