Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.8 LAccepted-AOC R O Y K PURA QAZIGUND ANANTNAG 192221 J K | ANANTNAG | JAMMU AND KASHMIR | 192221 | L1 | Accepted-AOC Lowest bidder and quoted reasonable rate | |
| 2 | L2₹29.9 L+₹1.1 L (3.74%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹33.5 L+₹4.7 L (16.2%)Rejected-Finance 6 GURU GOBIND SINGH NAGAR DHAKOLI DHAKOLI PATIALA PUNJAB 140602 | PATIALA | PUNJAB | 140602 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹45.4 L+₹16.6 L (57.8%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | Rejected-Technical | - | Rejected-Technical Not admitted being adverse remarks in WLR QE Mar 2023 issued by HQ CELZ |
Tender Value
₹30.8 L
EMD Value
₹61,600
Closing Date
19 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Kargil
GE Kargil, PIN - 908121, C/o 56 APO
GE-K-21-2023-24 - PROVN OF ONE TOILET BLOCK WITH ALLIED INFRA AT LOWER CAMP (R CENTRE) OF 259 TRANSIT CAMP(BTC) AND PROVN OF ONE TOILET BLOCK FOR OR LIVING COMPLEX AT SIG COY AT DRAS UNDER GE KARGIL (2ND CALL)
2023_MES_608314_2
GE/K-21/2023-24
Open Tender
Civil Works
Item Rate
180 days
Dras
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Kargil
₹61,600
16 Oct 2023
28 Aug 2023
21 Sept 2023
28 Aug 2023
19 Sept 2023
5 Sept 2023
Amount
M&L for surface dressing n.exc 15 cm deep and getting out in hard/dense soil
Excavating in trenches n exc 1.5 m in depth for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard / dense soil
M& L PCC 1:4:8 type D-2 (using 40mm graded stone agg) in foundation, filling and mass concrete.
M&L precast cement concrete type C-1, 1:3:6 using 20mm graded stone aggregates, block masonry with solid blocks, exc 10cm width andsetting cement mortar 1:6 complete.
Form work to sides of conrete foundation footings bases of columns, raft and raft beams sides and soffits of foundation and plinth beams and similar work etc. in flat rough finished surfaces of concrete complete all as specified and directed by Engr-in-Charge
Form work to sides of pillers posts struts piers coloums and stanchions etc. in square, rectangular or polygonal rough surface of concrete complete all as specified and directed by Engr-in-Charge.
Form work to sides and soffits of floor or roof beams, beams haunchings, girders, bressumers, lintel, cantilevers, shelves including supports, ovrhangs etc also splayes between floor and bemas in flat rough surface of concrete complete all as specified and directed by Engr-in-Charge.
Form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exc 200mm thick (Horizontal or sloping) in flat rough surface of concrete complete all as specified and directed by Engr-in-Charge.
M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape required inclduing cranking bending spirally for hooping ends and binding with and incl mild steel wire (annelaed) not less than 0.90 mm dia or securing with clips.
All as per item No 9 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified.
M&L for reinforcement cement concrete (design mix) M-25 (using 20mm graded crushed stone aggregate) in foundation , including rafts, footing, foundation beams, plinth beams, bases for coloums etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for reinforcement cement concrete (design mix) M-25 (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed by Engr-in-Charge.
M&L for reinforcement cement concrete (design mix) M-25 (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressumers, lintel over 1.5m span complete all as specified and directed by Engr-in-Charge.
M&L for reinforcement cement concrete (design mix) M-25 (using 20mm graded crushed stone aggregate) as slabs supported on walls, beams and colomns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.
Returning filling incl spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil.
Removing excavated material n.exc. 50 m and deposited were directed at a level n.exc.1.5 m above the starting point
Earth filling in floors including spreading, levelling and ramming with watering as required in layers n.exc 25cm thick.
Hard core of broken stones or boulders of gauge in exc 63mm deposited spread and levelled in layers n. exc 15cm thick incl watering and rolled to true surface.
M&L 75mm thick cement concrete (1:4:8) type D2 using 40mm graded aggregate as in sub base to floor as specified.
M&L PCC 1:3:6 type C1 ( using 20 mm grade aggregate) 75 mm thick as in plinth protection/paving complete all as specified and as directed
M & L rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed
M & L rendering 15 mm thick in CM 1:4 on other fair faces of brick work or concrete surfaces in two layers 10mm & 5mm thick with WPC to be used in outer layer of 5mm thick, finishing even and smooth without using extra cement complete all as specified and as directed. Note : (WPC will be measured and paid seperately)
Supply only liquid waterproofing compound
M&L Fe 290 (Gde E-165) for roof trussed (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed
S&F Rolled mild steel Gde Fe-290 (Gde E-165) as in Plates (plain or chequered) channels,angle sections, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified
S&F 20mm dia of neck mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, length of bolt exc 30cm long complete all as specified
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L PCC type B0 1:2:4 (12.5mm graded aggregate) 25mm thick as in floor finished surfaces fair and even to receive tile all as specified and as directed
M&LCement concrete Type BI (1:2:4) 20 mm graded aggregate for coping all as specified and directed.
M&L Cement concrete 1:2:4 type B 2 (using 40mm graded aggregate) in surface channels and drain complete all as specified and directed.
M&L for forming fair finishes drain or channel 30 cm inner girth in cement concrete using extra cement all as specified and directed.
M&L Non skid Ceramic coloured tiles 7 to 8mm thick area of each tiles exc 0.06 sqm but not exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm screed bed in CM 1:6 finished even and smooth for receive tiles complete all as specified
M&L for Glazed ceramic coloured tiles in vertical surfaces 350x450x7mm thick etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tile over 10mm thick rendering in cement mortar 1:4 in backing coat of plaster for skrting/dado complete all as specified.
M&L for 20mm thick granite (of any type) work table rubbed and polished) in steps, pillars, jambs, window cills, cooking plateform/whash basin plateform etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified
S&F 2nd class softwood (KAIL) as in Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed
S&F 35mm thick 2nd class soft wood (KAIL) plain framed panelled shutters (any No of pannels) with panels of timber flat on both sides (Feather edgeed), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed
S&F 30 mm thick 2nd class soft wood (KAIL) glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers
S&F 100 mm butt hinges medim weight cold rolled mild steel fixed with screws or welded all as directed.
S&F butt hinges medium weight cold rolled mild steel of 75 mm long
S&F anodised aluminium barrel tower bolt extruded sections 200 mm size.
S&F anodised aluminium barrel tower bolt extruded sections 150 mm size.
S&F 125mm extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed
S&F 100mm extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed
S&F 250mm Aluminium alloy, anodised,sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beading in square n exc 0.5 qm m in
M&L preparation of new plastered surfces of walls and applying three coat wash complete all as specified and as directed.
M&L for preparationof new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer.
M&L for preparation of wood and wood based material surface of any description description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and as directed
M&L prepation of new or previously untreated surfaces on steel of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S&F High grade stainless steel toilet pan of size 58.5x48.2x30.0 cm (excludiig flushing cistern and flush pipe) complete all as specified
S&F PVC flushing cistern valveless syphonic action type flushing cistern low level 10 Ltrs white with inlet ball valve float and handle incl bracket.
S&F vitreous china urinal bowl type complete including provoding and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinals to plug with and incl 60cm long brass screw pointing around urinal back in cement complete all as specified
S&F vitreous china urinal partition white of size 310x700mm complete all as specifed and as directed
S & F WHB counter sunk type ovel under/over counter shape in fixed & on stone slab incl necessary cutting etc complete all as spcifed and directed.
S&F pillar tap 15 mm bore fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed and fly screwed for iron pipe complete all as specified
S&F 15mm dia chromium plated fancy type Bib tap with round handle screwed down screwed for iron pipe or brass ferrule complete all as specified
S&F 15mm dia chromium plated fancy type stop valves/angle cock screwed down high pressure, screwed for iron pipe complete all as specified
S&F PVC connection15mm size, with PTMT nuts of length 600mm
S&F 32mm CP waste coupling with waste pipe complete all as specified
S&F 32mm CP waste coupling with waste pipe but suitable for urinals complete all as specified
S&F CP urinal spreader complete all as specified
S&F Towel rail 600 mm long PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats (Min Wt 170 gms)
S&F CP Towel rail 600mm long fixed with and incl chromium plated brass screws and wooden/plastic cleats complete all as specified.
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet 75mm
S&F 75mm bore PVC (SWR) bends any radious with access door complete all as specified and as directed
S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed
S&F 110mm PVC (SWR) 'P' trap complete all as specified
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed
S&F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed
S&F 75mm bore PVC (SWR) reducer complete all as specified and as directed
S&F 75mm bore PVC (SWR) vent cowl complete all as specified and as directed
PVC (SWR) pipes110mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors
PVC (SWR) pipes75mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors
S&F for 16mm outer dia 3-layer PPR polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stablized and antimivrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors all as specified
S&F for 20mm outer dia 3-layer PPR polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stablized and antimivrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors all as specified
S&F rotational moulded polytheline water storage tank 1000 Ltrs capacity (cylinercial/vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
S&F Gun metal globe or gate valve with iron wheel head screwed both ends for iron ipe and fixed of 20mm bore diacomplete all as specified and as directed
M&L for Vibro compacted Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all as specified and as directed
M&L for Sand filling under floors or in foundation including watering and consolidation all as specified and as directed
Providing precast cement concrete Type B-1 1:2:4 (20 mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain frames set in CM1:6 ,all as specified and directed.
M&L Concrete bed to drain pipe in PCC (1:4:8) Type-D-2, using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested, for 100 mm bore of pipe (Earth work shall be measured and paid separately)
Sockage well exc in hard dense soil, foundation in PCC 1:3:6 well of honey combed and each solid in m - 25 concrete , including , intercepting chamber, screen chamber stone work in CM 1:4 RCC cover slab in M- 25 filling with stone boulder complete of 3.00 dia amd 3.00 m deep ( Drg No - CESZ/TD/ -1078/2011, Sheet - 1/1).
M&L for Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete.
All as per Srl item No 85 here in before but for one 3 pin socket outlet 5 Amps on independent board.
All as per Srl item No 85 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps on independent board.
S & F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.
S & F Switch socket combination 2 in 1, 5 pin, 15 Amps flush type.
S & F Switch piano flush type 5 Amps, single pole one way.
Supply and fixing in LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing in LED 1x18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
M & L for Ceiling rose surface bakelite 65x50mm, two to three terminals.
S & F of Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.
Supply and fixing of 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning.
Supply and fixing of 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning.
S&F of LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size.
M&L for exhaust fan complete with metallic blade , heavy duty , motor 240 V single phase of size 300 mm sweep incl making hole etc and fixation with 04 nos fully threaded bolt grouted in wall , nut and proding , wire mesh from out side complete with connection, complete all as specified. Make : Havells/Cromton or Equivalent.
S&F of 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.
Note :Deduction for amount of Rs 0.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.
M/S BILAL AHMAD BHAT
JP AND CO.
M/S Ghulam Mustafa
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .