NIT NO. 04 ITEM NO. 19

Supply / fabrication of base stand / frame made out of Angle Iron of suitable size for fixing the above Panel having hight of minimum 300 mm and suitable for making outgoing /incoming cable entries in the panel. It should be duly painted and ready with provisions for installing at the site. As per direction of Engineer in charge.

Procurement of horizontal Non Clog sewage pump set: MOC: Impeller-SS Shaft Sleeve- SS Casing-CI Discharge: 290 m3/hr Head: 25 Mtr , 100/26 SHMor equivalent and along with 25 Hp/18.64 Kw induction motor, 50 Hz, RPM: 1475, 3-Phase, 440 Volt along with base plate, coupling guard & coupling etc. Make: Kirloskar/KSB/LUBI/Jyoti/ DJB Approved

Procurement of sewage Submersible pump set: Impeller-SS Shaft Sleeve- SS Casing-CI Discharge: 300m3/hr Head: 15 to25 Mtr , along 16Kw/25 HP, 50 Hz RPM: 1475, 3-Phase, 440 Volt along with base plate Make: Kirloskar/KSB/LUBI/Jyoti/ DJB Approved

Providing of 10 mm thick M.S flange for 100 mm dia. M.S pipe.

Providing of 10 mm thick M.S flange for 150 mm dia. M.S pipe.

Providing of 150 mm dia. Non-Return valve.PN 1.0 Make- Kirlosker/ IVC / Any other DJB approved

Providing of 150 mm dia. Non-Rising Spindle sluice valve PN 1.0. Make- Kirlosker/ IVC / Any other DJB approved

Providing of 100 mm dia. Non-Rising Spindle sluice valve PN 1.0. Make- Kirlosker/ IVC / Any other DJB approved

Providing of 100mm dia. Non-Return valve PN 1.0 Make- Kirlosker/ IVC / Any other DJB approved

Providing of 100 mm dia. Kinetic air valve Make- Kirlosker/ IVC / Any other DJB approved

Procurement/fixing of M.S Black Pipes P/E conforming to IS:1239 Part-1, Medium(B Class) of Dia=100mm. Make: Jindal/Tata/ Any other DJB approved

Procurement/fixing of M.S Black Pipes P/E conforming to IS:1239 Part-1, Medium(B Class) of Dia=150mm. Make: Jindal/Tata/ Any other DJB approved

Making/ Casting the new foundation with the rich RCC mixture upto 200 m.m height suitable for 25 H.P pump sets. i/c providing the foundation bolts (6 nos. each) & fixing the same in the foundation before casting etc. as required.

Fabrication/Supply of the Suction line /Bend (1Nos.) made out from B class M.S Pipe Size 100 N.B 6 mtr. approx. duly flanged as per existing.

Fabrication/Supply of the Suction line /Bend (1Nos.) made out from B class M.S Pipe Size 150 N.B 6 mtr. approx. duly flanged as per existing.

Fixing of MS Base frame on the foundation, Suction /Delivery lines, Valves, gap pieces by electric welding set, manual labour, alignment the pump/ motor, fixing of MS delivery line in the existing pumping main and also making electric connection of the pump sets etc.

Providing the Delivery line gap piece,/Bend (1Nos.) made out from B class M.S Pipe Size 100 N.B. duly flanged as per existing.

Providing the Delivery line gap piece,/Bend (1Nos.) made out from B class M.S Pipe Size 150 N.B. duly flanged as per existing.

Fixing of MS Header ( it include providing support to header) and connecting Suction /Delivery lines, Valves, gap pieces by electric welding set, manual labour, alignment the pump/ motor, fixing of MS delivery line in the existing pumping main and also making electric connection of the pump sets etc.

Testing, commission the pump sets on NO LOAD/ FULL LOAD.

Providing of Flat 3 Core copper conductor PVC Insulated & PVC Sheathed Industrial Cable of 16mm2, L= 100 Meter 1100 Volt, conforming to IS 694 Make: Havells/DJB Approved

Necessary electrical work , it include procurement/installation of Fan, tube light , power switch. And illumination as per site requirement

Providing the hard ware goods for erection the suction and delivery line at site.

Travionyx Technologies Private Limited