SPECIAL REPAIR OF 04 X BATHROOOM OF BLDG NO P-675 AND 02 X BATHROOM OF BLDG NO P-674 AT FSEG AND SEWAGE SYSTEM AT CHEERBAGH UNDER GE DEHRADUN

Amount

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for brickwork with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 but except brick complete all as specified and directed.

Material and labour for Cement concrete 1:2:4 B-0 (using 12.5 mm graded stone agg) in coping, bed plates and chamfered angles and throating etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified

Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair (without using extra cement) complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft soil complete all as specified and directed.

Material and labour for in PCC (1:4:8) type D-2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

Material and labour for in PCC (1:4:8 ) type D-2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and directed.

Material and labour for in PCC (1:4:8 ) type D-2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300 mm bore pipe complete all as specified and directed.

S&F 150 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and diirected.

S&F 200 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and diirected.

M & L 300mm Reinforced Concrete pipes, class NP-2 with one collar per length of pipe complete all as specified .

Cutting into existing manholes for connecting new drains 150mm /200mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Demolition of Reinforced cement Concrete as in roof slab, floor beam, roof beam, staircase, column and similar works complate all as specified

Material and labour for 60 mm thick reinforced precast cement concrete 1:1:2 type B-1 (using 20mm graded stone aggregate) as in man cover bromatic slabs finish fair even and smooth without using extra cement (Top surface will be chequred finish) including necessary form work including 2mm thick CR sheet with 2 coats of bitumen paint and two nos PVC counter sunk handle 12mm dia to surface, complete all as specified and directed by Engr-in-charge. Note: (Reinforcement shall be measured and paid saperately)

Material and labour for RCC M-20 (using 20 mm graded stone aggregate) in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc. complete all as specified and directed.

Use and waste of steel Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat surfaces of concrete complete all as specified and directed.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Material and labour for construction of Soakage wells 2.4 m internal dia and 3.0 m effective depth complete all as specified and shown on drawing No CEBZ TD Drawing No. 309 Sh 1 to 4/4 (Drawings are available with Engr-in-Charge).

Material and labour for construction of Soakage wells 1.8 m internal dia and 4.50 m effective depth complete all as specified and shown on drawing No CEBZ TD Drawing No. 309 Sh 1 to 4/4 (Drawings are available with Engr-in-Charge).

Material and labour for construction of 25 users septic tanks complete all as specified and shown on drawing No CEBZ TD Drawing No. 217 Sh 1/7 to 7/7 (Drawings are available with Engr-in-Charge).

Material and labour for construction of 50 users septic tanks complete all as specified and shown on drawing No CEBZ TD Drawing No. 217 Sh 1/7 to 7/7 (Drawings are available with Engr-in-Charge).

Material and labour for construction of 100 users septic tanks complete all as specified and shown on drawing No CEBZ TD Drawing No. 217 Sh 1/7 to 7/7 (Drawings are available with Engr-in-Charge).

Sucking out sewage water through sewage tanker from the man hole/septic tank/soakage well in different location and disposal (5000 ltr capacity) of out of MD land as directed by Engr-in-Charge.

S & F in repair 75 mm bore PVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends any radius with oval acess door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends any radius with oval acess door complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval acess door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval acess door complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction double, (Double T) equal or unequal with oval acess door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval acess door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

Material and labour 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crused stone agg) as in sub base complete all as specified and as directed.

Material and labour factory made prepolished rubber moulded vibromatic coloured Chequred cement concrete tiles 30cmx30cmx22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and colour pigment to match over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified.

Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed by the Engr-in-Charge.

Material and labour Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for non-skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including P- trap and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chormium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 10 ltr capacity PVC low level flushing cistern valveless, syphonic action type, white, with inlet, ball valve, float and handle including brackets and fixed complete all as specified and directed.

M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 10mm thick rendering on brick work or concrete surface in cement mortar 1:3 surface finished and smooth as in ceiling complete all as specified and directed.

M&L for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 1-2 mm thick wall care putty finish wall surface even & smooth all as specified and directed.

Material & Labour for preparation of newly plastered surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying two coats of distemper oil emulsion over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed.

M&L for complete removal of existing treatment of walls including corners and applying two coats of distemper oil emulsion over applying of 1-2 mm thick wall care putty finish wall surface even & smooth all as specified and directed.

M&L for complete removal of existing treatment of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling and applying two coats of distemper oil emulsion over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed.

M&L in repair granite 18-20mm thick of Zed Black/Telephonic Black ( table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like with approved adhesive incl pointing in coloured grout to match with shade of granite including moulding complete all as specified and directed.

M&L for glazed ceramic colour tiles size 300 mm x 450 mm/ 300 mm x 600mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for non skid/mat finish ceramic colour tiles of size 300 mm x 300 mm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic coloured tiles 8-9 mm thick dark shed (square/rectangular) polished area of each tiles not exceeding 0.72 sqm, in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per item No 16 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm and n.exc 4 sqm each (without taking off shutters from the frame) and removing from the site complete all as specified and directed.

All as per ser Item No 18 above but n.exc 1.5 sqm each complete all as specified and directed.

S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed.

S&F MS Butt Hinges medium weight, cold rolled mild steel 100 mm fixed to steel/wooden shutters complete all as specified and directed.

S&F for mild steel barrel tower bolts 150 mm size, stove enamelled black, with bright bolt fixed in repairs complete all as specified and directed.

S&F for mild steel pressed handles 150 mm size stove enamelled black complete fixed complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white (size as directed by Engr-in-charge) complete all as specified and directed.

S&F in repair Vitreous China counter top wash hand basin (of required size to fit on slab) white including waste coupling and waste up to floor trap and fixed complete all as specified and directed.

S&F in repairs 15 mm bore (with or without swan neck as required) Pillar cocks chromium plated brass with capstain head screwed down high pressure complete all as specified and directed.

Supply and Fixing in repairs 15 mm dia angle cock/ angle valve/ stop valves chromium plated with capstain head screwed down high pressure complete all as specified and directed.

Supply and Fixing in repairs bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete all as specified and directed.

S & F in repairs health faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair CP urinal spreader for fixing with the inlet connection complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing including dismantling of old tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing including dismantling of old tubing complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

S&F in repair PTMT Ball valves 20 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval acess door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval acess door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Supply & fix for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 83.00 x 44.45 x 1.54 mm including 5 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc. complete all as specified and directed. Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

S&F Framed work such as grills, gratings, etc. or hand rails with ends of bars (angle, hollow section) shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of timber scantlings 40 sq cm and over in section in any position in unframed work complete all as specified and directed.

S&F MS rolled sections / tubular pipes etc. as in main and cross beams, Jack rafters, balconies and railings, purlins where connected to common rafters and running rails etc. confirming to Fe-290(Grade E-165), complete all as specified and directed by Engr-in-Charge.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an ecofriedly colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of med grade of suitable size with all fitings and accessories including factory made MS pressed modular metal flush boxes with zinc coated duly concealed in wall including reqd as per site reqmt for mounting modular switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified (Note: Colour code shall be maintained as per IE rule).

(a) One light point/ Fan point controlled by one, one way switch

(b) One three pin 5 Amp socket on independent board

Point wiring with 2.5 sq mm single core PVC insulated and unsheathed FRLSH cable, 1100 volts grade IS -694 marked with multistandard copper conductors and earth continuty wire with similar 2.5 sq mm cable (incl connecting to earth dolly) drawn through and incl rigid PVC conduit suitable size and conduit accessories concealed in wall by cutting grooves except on ceiling and panel in suitable way with clamps screw etc with and incl concealed/surface modular box suitable for logic modular switches , sockets , etc and incl logic modular white frame with cover plates of suitable size as required at site complete all as specified and directed

S&F switch modular type, 16 amp, 230/250 volts grade, one way.

S&F socket outlet modular type 16 Amp, 5 Pin 230/250 volts grade, 02 module complete all as specified and directed

M&L for sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valind CML No), cable 1100 Volt grade, 10 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 sqmm FRLS copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.

S&F mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size .

S&F decorative wall mounting made out of polycarbonated suitable for and incl retrofit 9 watts LED bulb complete all as specified.

S&F LED tube light fitting batten type with extruded alluminium body and polycarbonate diffuser all in one single phase 22/20 W with lamp 6500/4000 K complete pre-wired all accessories.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F Modular switch 1 way 06 amp single pole.

Supply and fixing Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified.

M&L for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar.

S & F , MCB SP 6 to 40 Amp, 240 Volts, 'C' curve having breaking capacity 10 KA,

S & F , Isolator SPN 40 to 63 Amps, 240 Volts having braking capacity 10 KA.

Sheet metal enclosure single pole and neutral earth enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts, complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm

VERDHMAN ASSOCIATES (BID ID -3137546)

M/s Ruchi Rabh associates (BID ID -3129158)