ANNUAL RATE CONTRACT FOR PROVIDING AND APPLYING HOT THERMOPLASTIC ROAD MARKING PAINT (ASIAN, BERGER & As per MORTH) WITH GLASS BEADS , Molded Shank Raised Pavament Markers,Solar Sturd,On various ROADS OF EAST (VARACHHA) ZONE-A.

EAST (VARACHHA) ZONE-A

NAME OF WORK : ANNUAL RATE CONTRACT FOR PROVIDING AND APPLYING HOT

THERMOPLASTIC ROAD MARKING PAINT (ASIAN, BERGER & As per MORTH) WITH GLASS

BEADS , Molded Shank Raised Pavament Markers And Solar Sturd ON VARIOUS ROADS

OF EAST (VARACHHA) ZONE-A AREA SURAT.

Item Rate (Rs.)

Particulars Quantity Per

No. WITHOUTH GST

Providing and applying 2.50 mm thick hot

applied thermoplastic road marking of white / yellow

colour on bituminous / concrete surface with fully automatic

machines as per detailed drawings / engineers

1 instructions for Lane markings, edge markings / arrows

including materials, labour charges, tests required to be

carried out etc. complete as per details in tender

specification & as directed by engineer in charge.

A For Edge line marking of 15cm width

B For Center Line marking of 10cm width

C For pedestrian markigns at junctions (Zebra Crossing)

D For pedestrian markigns at junctions (STOP LINE)

E Letter markigns at junctions

F Direction arrow markigns at junctions

G For lane line marking of 15cm width

Supplying of Molded Shank Raised Pavement Markers

made of polycarbonate and ABS molded body and

reflective panels with micro prismatic lens capable of

providing total internal reflection of the light entering the lens

face and shall support a load of 16000 kg tested in

accordance to ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height,

width and length shall not exceed 50 mm, 100 mm and

2 mm and with minimum reflective area of 13 Sqcm on each 200.00 217.40 Nos.

side and the slope to the base shall be 35 +/-

degree. The strength of detachment of the integrated

cylindrical shanks, (of diameter not less than 19 +/- 2 mm

and height not less than 30+/- 2 mm) from the body is

to be a minimum value of 500 Kgf. Fixing will be by drilling

holes on the road for the shanks to go inside, without nails

and using epoxy resin based adhesive as per

manufacturer’s recommendation and complete as

directed by the engineer. (3M or Equivalent Brand)

Solar Stud: Supplying of Solar Raised Pavement

Markers made of polycarbonate molded body with circular

shape, solar powered, LED self illumination in active

mode, 360 degree illumination and reflective panels with

micro prismatic lens capable of providing total internal

reflection of the light entering the lens face in passive mode.

The marker shall support a load of 20000 kg tested in

accordance to ASTM D 4280. The marker should be resistant

to dust and water ingress according to IP 65 standards and

should withstand temperatures in the range of 0 C to 70 C.

Color of lighting could be provided in red or yellow (amber) as

per requirement and typical frequency of blinking is 1 Hz.

There should be current losses of less than 20 micro-

3 amperes at 2.4 V in sleep-charging mode to enhance the life 50.00 2068.00 Nos.

of the marker and a full charge should provide for a

minimum autonomy of 50 hours. The height, width and

length of the marker shall not be less than 10 mm x

100 mm x 100 mm. Also, the surface diameter of the

marker shall not be less than

100 mm respectively. The weight of the marker shall not

exceed 0.5 Kilograms. Fixing will be by drilling holes on

the road for the shanks to go inside, without nails and using

epoxy resin based adhesive as per manufacturers

recommendation and complete as directed by the

engineer. (3M or Equivalent Brand)

Estimated Amount Rs.

Executive Engineer

East (Varachha) Zone-A

Surat Municipal Corporation