Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC | L1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L2₹31.6 L+₹4.7 L (17.4%)Rejected-Finance 113 SURESH SHARMA NAGAR NEAR S S V ENTER COLLEGE BAREILLY 243001 | BAREILLY | UTTAR PRADESH | 243001 | L2 | Rejected-Finance Over all rates are higher than L-1. | |
| 3 | L3₹35.8 L+₹8.9 L (33.3%)Rejected-Finance | L3 | Rejected-Finance Over all rates are higher than L-1. | |
| 4 | L4₹41.9 L+₹15.0 L (55.9%)Rejected-Finance 37 205 A 2 A 1 BUNDHU KATRA GWALIOR ROAD AGRA 282001 | AGRA | UTTAR PRADESH | 282001 | L4 | Rejected-Finance Over all rates are higher than L-1. |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
29 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST BAREILLY
GE WEST BAREILLY
MISC PETTY REPAIR WORKS IN ZONE I TO IV AREA UNDER AGE B/R-II OF GE (WEST) BAREILLY.
2023_MES_600883_1
8128/C/E8
Open Tender
Civil Works
Item Rate
270 days
GE WEST BAREILLY
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE WEST BAREILLY
₹98,000
Yes
17 Aug 2023
3 Jun 2023
1 Jul 2023
3 Jun 2023
29 Jun 2023
17 Jun 2023
Amount
Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.
M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.
Dismantling floor, hearth or wall tiling, Terrazzo including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for glazed ceramic coloured tiles 300 mm X 200 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed.
M & L for glazed ceramic coloured tiles 450 mm X 300 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed.
M & L for vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including screeding 15mm thick in CM 1:6 complete all as specified and directed.
M & L for vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed.
S & F of 16-18 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
S & F in repairs wooden flooring (make signature) size 1215 x 195 mm and thickness 8.3 mm direct pressure laminated according to EN 13329 for glueless installation heavy domestic and light commercial use EN 13329 lavel of use 22 including under layer of 2 mm EP and polythene layer complete all as specified and directed.
S & F in repairs wall panelling of plastic vinyl composite of size 3050 x 254 x 8 mm thick with wooden / plain surface waterproof, termite proof, chemical resistant of light weight fixed with wooden screw with rawl wall plug complete all as specified and directed.
S & F in repairs vertical venetian blind of 100% polyster having width 100 mm and thickness 0.45 - 0.63 mm, light grade 4-6 with aluminium channel complete all as per manufacturer instructions, as specified and directed.
S & F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories complete all as specified and directed.
M & L for rendering 10 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 10 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement including taking down existing defective plaster complete all as specified and directed.
M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement including taking down existing defective plaster complete all as specified and directed.
M & L for rendering 5 mm thick cement plaster on cement concrete surfaces of ceiling and chajja with cement mortar 1:3 finished even and fair with and including taking down existing defective cement plaster complete all as specified and directed.
M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.
M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M & L for Preparation of plastered or unplastered old decorated surface of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coats of white wash complete all as specified and directed.
M & L for Preparation of plastered or unplastered old decorated surface of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of Oil bound distemper complete all as specified and directed. NOTE : OBD will be done by roller only after complete removal of old loose OBD flakes.
M & L for Preparation of plastered or unplastered old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed. NOTE : Cement Base Paint will be done by roller only after complete removal of old loose Cement base paint flakes.
S & F of PVC board 19/20 mm thick any colour/ prelaminated as in cabinets including shelves and shutters, fixed with screws and adhessive as per manufacturer's instructions including piano hinges, magnet catcher, handles etc. complete all as specified and directed.
M & L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including taking up or down old unserviecable one complete all as specified and directed.
S & F of 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including taking up or down old unserviecable one complete all as specified and directed.
S & F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed.
S & F in repairs water closet vitreous china squatting pan ‘Orissa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.
S & F in repair plastic seat cover suitable for water closet pedestal pan, white coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices complete all as specified and directed.
S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed.
S & F in repairs Vitreous china wash basin white flat back 550mm x 400 mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed.
S & F in repairs waste coupling 32/40 mm dia brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed.
S & F in repairs PVC waste pipe 25 mm dia 750 to 800 mm long fixed to waste fitting of wash basin including socket suitable for waste fitting complete all as specified & directed.
S & F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.
S & F in repairs 15 mm bore fancy type, chromium plated stop valve/angle valve/ two way angle valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repairs 15 mm bore bib tap, chromium plated fancy type, long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 100 mm size brass chromium plated shower rose with or with out swivel joint including shower arm 195 mm long with bend of 45 degree and flange, fixing to steel pipe or union complete all as specified and directed.
S & F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.
S & F in repairs water jet for EWC chromium plated with PVC connection pipe complete all as specified and directed.
S & F of chromiumm plated heavy duty extension piece 15 mm bore and 25 mm long complete all as specified and directed.
S & F in repairs Chromium plated hand shower (health faucet) alongwith 1 metre long PVC tube and wall hook suitable for EWC complete all as specified and directed.
S & F of 600 mm long in repairs PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.
S & F in repairs Chromium plated toilet paper stand as per sample kept with Engineer- in-charge complete all as specified and directed.
S & F in repairs Chromium plated towel ring sample kept with Engineer- in-charge complete all as specified and directed.
S & F in repairs glass shelf with chromium plated brackets of suitable size sample kept with Engineer- in-charge complete all as specified and directed.
S & F of 100 mm long stainless steel butt hinges, medium weight complete all as specified and directed.
S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.
S & F in repairs 15 mm size bib tap standard of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.
S & F in repairs 15 mm size pillar tap of PTMT, any colour high pressure screwed for iron pipes (minimum weight 110 gram) complete all as specified and directed.
S & F in repairs 15 mm size stop valve / angle valve of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.
S & F in repairs vitreous china counter top wash basin snow white oval shaped size 560 mm x 400 mm including PVC waste pipe, PVC connection 450 mm long,32 mm bore CP waste coupling, chian & plug, brackets etc. as required complete all as specified and directed. MAKE- Cera, Kerovit, Asian Paints.
S & F in repairs vitreous china wash down water closet single piece WC with UF seat cover, hinges, fixing accessories, cistern fittings, ovarall size 655 x 665 x 760 mm, S trap 300 mm including connection to drain pipe etc complete all as specified and directed. MAKE- Kerovit, Hindware, CERA, Asian Paints.
S & F in repair wall out let 30 mm dia, 40 mm long, round shape with 15 mm thread to connect hand shower pipe and flange, MAKE- Jaquar Cat No. SHA-CHR-1195R complete all as specified and directed.
S & F in repairs sliding rail 19 mm dia and 600 mm long round shape with hand shower holder and soap dish, MAKE- Jaquar Cat No. SHA-CHR-1187 complete all as specified and directed.
S & F in repairs hand shower 75 mm dia cylindrical shape multi-flow (Normal, massage and mist) (ABS body chrome plated with grey face plate) with rubit cleaning system complete all as specified and directed. MAKE- Hindware Model No. F160053, Cera Cat Part No. F7030308AB, Kerovit Cat Part No. KA520008, Asian Paints Cat Part No. HS-208.
S & F in repairs towel rail 600 mm long as per Cat Part No. ACN CHR 1111 NM complete all as specified and directed.
S & F in repairs stainless steel soap dish as per model No. SSD-701 of Silverline complete all as specified and directed.
M & L for 16-18 mm thick Green Marble, machine cut, polished, bedded and jointed in grey cemet slurry including rounding edges and making hole where required laid over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old existing one complete all as specified and directed.
S & F in repairs vitreous china urinal bowl type, flat back, white 465 x 355 x 265 mm with grating, union for discharge and waste pipe but excluding flushing cistern complete all as specifed and directed.
S & F in repairs chromium plated brass spreader suitable for urinal complete all as specified and directed.
M & L for providing PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in levelling course, any thickness as per site requirement, finished even and fair without using extra cement over roof surface, chajja and the like complete all as specified and directed.
M & L for POP false ceilig includng GI framing, main member C shaped spacing not exc 1m c/c having weight 300 to 350 gram per RM and cross member U shaped spacing exc 500 mm c/c having weight 250 to 300 gram per RM and C section fixed on parameter wall with screws and rawl plug including hanging arrateement to RCC slab wth L shape member exc 105 m (weight not less than 120 gram per RM) and wire mesh of dia 0.50 to 0.56 mm weight not less than 350 gram per sqm fixed with steel screws of GI framing and applying two coat of luxury emulsion (Royal) and including plaster of paris fancy moulding pattern in corners of ceiling in triangular or any shape of size 75 mm x 75 mm including finished upto the required mark complete all as specified and directed.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down door or window shutter of any description not exc. 1.00 Sqm each complete all as specified and directed.
Taking down door or window shutter of any description exc. 1.00 Sqm but not exc. 2.00 Sqm each complete all as specified and directed.
S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick single side prelam PVC sheet and edges will be painted to match with prelam sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed.
S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded both sides prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both sides prelam PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of both sides prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable side feathered edge beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed.
S & F of 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc. complete all as specified and directed.
S & F of 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.
M & L for providing plain cement concrete type C-0, 1:3:6, (using 12.5 mm graded stone aggregate), as in bed block for embedding hold fasts, filling in back of pressed steel frames and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
S & F of 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed.
S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, Part-I (Specifications) complete all as specified and directed.
S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, Part-I (Specifications) complete all as specified and directed.
S & F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wire gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002. NOTE- Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. Rate for filling PCC in frame deemed to be included in quoted rates. MS grill shall be measured and paid seperatly under relevant item of schedule.
S & F of factory made steel window or ventilator fixed type with glazing bars complete all as specified and directed.
S & F in repairs second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 Sqcm and not exceeding 25 Sqcm complete all as specified and directed.
S & F in repairs 19 mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber framework complete all as specified and directed.
S & F in repairs 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.
S & F of 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F in repairs 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
S & F in repairs 100 mm long mild steel cold rolled butt hinges, medium weight complete all as specified and directed.
S & F of 300 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.
S & F in repairs 300 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.
S & F in repairs Aluminium extruded section body door closer hydraulically regulated designation No. 3, universal type suitable for door shutter 851 to 1000 mm in width and 61 to 80 Kg in weight complete all as specified and directed.
S & F of 65 mm size four levers, brass mortice lock, vertical type with escutcheon plates and keys in duplicate, fixed to aluminium frame complete all as specified and directed.
Repairing of aluminium door / window etc of any size / any number of panels including taking down & refixing (if required) for easy closing / opening / tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed.
M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips and providing new glazing pins / spring clips complete all as specified and directed.
S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S & F of 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S & F in repairs 5.5 mm thick plain glass, pin head type and glazing in aluminium frames in squares not exc. 0.5 Sqm in each pane complete all as specified and directed.
S & F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S & F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed.
Dismantling of corrugated or semi corrugated asbestos cement sheets in roof covering complete all as specified and directed.
S & F of 6 mm thick asbestos cement corrugated or semi-corrugated sheets fixed with ‘L’ type or ‘J’ type or cranked hook bolts and washers as in roof covering, walls etc. complete all as specified and directed.
S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F in repair aluminium powerded coated (minum 50 micron) anodised partition wall with aluminium frame of size : (a) Single Groove Section: 82.50 x 38 x 1.20 mm thick. (b) Double Groove section: 82.50 x 38 x 1.10 mm thick duly fitted with neosprene rubber beading,frosted glass panes 4.8 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels including securing with 'U' channel at top joining partatio complete all as specified.
S & F of aluminium grill of grid size 75 mm x 75 mm and 5 mm thick and fixed with machine screw complete all as specified and directed.
S & F of aluminium anodised powder coated (minimum thickness of powder coating 50 micron) window, ventilator shutters and kitchen cupboards, side hung type or slidding type without sash bars, alumimium section weighing 0.55 Kg per RM with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, aluminium anodised fittings such as 1 No. peg stay 150 mm long, 2 Nos. 100 mm long hinges type B-21, 1 No. aluminium handle complete all as specified and directed.
S & F of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators or partitions with one or more rebates including joining cleat etc. for fixing complete all as specified and directed.
S & F of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 Kg per running metre including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminum snap beading, screws etc. complete all as specified and directed.
S & F of 5.5 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square exc. 0.5 sqm in each pane with and including solar control film 25 micron thick reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.
S & F of 100 mm size four levers, mild steel mortice lock, vertical type complete all as specified and directed.
S & F in repairs sensor embeded urinal pot including all necessary fittings as required complete all as specified and directed. MAKE- Cera, Jaquar.
M & L for repairs to steel windows by replacing all old friction hinges with box type hinges, making the windows functional including all necessary welding work as required complete all as specified and directed.
S & F in repairs stainless steel plain basket 15" wide and 8" deep suitable for kitchen cabinet complete all as specified and directed.
S & F in repairs stainless steel plain basket 15" wide and 6" deep suitable for kitchen cabinet complete all as specified and directed.
S & F in repairs stainless steel cutlary basket 15" wide and 8" deep suitable for kitchen cabinet complete all as specified and directed.
S & F in repairs stainless steel large plate basket 15" wide and 8" deep suitable for kitchen cabinet complete all as specified and directed.
S & F in repairs stainless steel small plate basket 15" wide and 8" deep suitable for kitchen cabinet complete all as specified and directed.
S & F in repairs stainless steel cup and saucer basket 15" wide and 8" deep suitable for kitchen cabinet complete all as specified and directed.
S & F in repairs stainless steel bottle guard basket 6" wide suitable for kitchen cabinet complete all as specified and directed.
S & F in repairs hydraulic chanel 20" long for sliding of baskets of kitchen cabinet complete all as specified and directed.
S & F in repairs stainless steel plate rack of appropriate size, overall weight not less than 5 Kg complete all as specified and dirrected.
M & L for rubber moulded 60 mm thick, M-35 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over and including 25 mm thick sand cushioning, filling of joints with sand and taking out existing old unserviceable one complete all as specified and directed.
Notes:- (a) Material not included in schedule of credit and debris from the dismantling having lowest value / Nil value shall be the property of department. The same shall be removed / disposed or deposited by the contractor in MES stores yard of GE (West) Bareilly as directed for which no additional payment shall be made. The contracotor shall be fully responsible to safe guard these materials against loss / theft / deterioration etc. till the same to be deposited by him in MES Store yard. (b) The contractor or his authorized representative shall attend office of AGE B/R for collection of complaints raised by user on regular basis and same has to be rectified / completed on requirement basis. If the contractors unable to rectify the complaints within stipulated time of 7 days (Maximum), penalty will be imposed to the contractor at the rate of Rs 500.00 per day for each complaint. (c) The above aspects shall be borne in mind by the tenderer while quoting the rates. The rates quoted by the tenderer shall be deemed to include the above aspects. (d) Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.
M/S Harshri Nath Enterprises
M/S YASHCON CONSTRUCTIONS
Jain construction co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .