Renovation and New Construction of RSP College Jharia, Dhanbad under RUSA

Amount

Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I.

Extra for earthwork in hard soil as per specifiction and direction of E/I(Vide classifiction of soil item B)

filling in foundation trenches and plinth in layer not exceeding 150mm thick well watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Filling in foundation trenches and plinth in layer not exceeding 150mm thick well watered rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50M and 1.5M all complete as per building specification and direction of E/I mode of messurement compacted volume)

Providing coarse clean sand in filling foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royaltyand taxes all complte as per building specification and direction of E/I

Providing disignation 75Bwork in c.m. (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.m 2 to 2.5 including providing 10mm thik mortar joints, cost of screening matearials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.

Providing disignation 75B Brick work in c.m. (1:6 ) superstructure and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, scaffolding raking out joints to 15mm depth, curing taxes and royalty all complete as per buildind specification and direction of E/I.

Providing 125 mm thick REINFORCED DESIGNATION 75 A BRICK WORK in C.M. (1:4) in SUPERSTRUCTURE with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15 mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of Engineer Incharge .

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)including attached pilasters , columns, piers, abutments,pillars,posts, struts , buttressess, string or lacing courses ,parapets, coping, bed blocks, anchor blocks, plian window silles, fillets, sunken floor etc , up to floor five level, excluding the cost of centering , shuttering and finishing 1:2:4

Providing and laying in position cement concrete of specified grade excluding the cast of centering and shuttering All work up to plinth level P.C.C 1:3:6 (1 Cement :3 Coarse Sand (Zone III): 6 graded stone aggregate 40 mm nominal size)

Centering and Shuttering including Strutting,propping etc.and removal of form for Foundation,footing,bases of columns,etc.for mass concrete.

Providing and laying in position specified grade of reinfoced cement concrete,excluding the cost of centering shuttering ,finishing and reinforcement-All work up to plinth ,level Fondition ,1:1.5:3 (1 Cement :1.5 coarse sand (Zone -III):3 graded stone aggregate 20mm nominal

Centering and Shuttering including Strutting,propping etc.and removal of form for Lintels ,beams,plinth beams,girders,bressumers and

Reinforced cement concrete work in beam,suspended floors,roofs having slope uop to 15 digree landing ,balconies ,shelves,chajjas,lintes,bands,plain window sill,stair cases and spifral nstair cases above plinth level up to floor five level,exculiding the cost of centering,shuttering,finishing and reinforcement,with lintel 1:1.5:3 (1 cement: 1.5 coarse sand (zone III):3 graded stone aggregate 20 mm nominal size)

Centering and Shuttering including Strutting,propping etc.and removal of form for Suspended floors,roofs,landings,balconies and access platform

Providing and laying cement concrete in retaining walls,return walls,wall (any thickness) including attached pilasters columns,piers,abutment,pillars ,post,struts,buttresses,string or lacing courses,parapets,coping,bed blocks,anchor blocks,plain window sills fillets,sunken floor etc,up to floor five level,excluding the cost of centering ,shuttering and finishing 1.1.5.3 (1 Cement :1.5 coarse sand (zone-III):3 graded stone aggregate 20mm nominal size)

Centering and Shuttering including Strutting,propping etc.and removal of form for Columns ,pillars,piers,Abutments,posts and struts

Centering and Shuttering including Strutting,propping etc.and removal of form for Stair,(excluding landings)except spiral-staircases

Supplying , fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with board core bended with high quality phenol formal dehydes synthetic resin of standard make with aluminium fittings such as hinges, tower bolts , handle , cleats and sand blocks and taxes all complete as per buillind specification and direction of E/I.

Supplying , fitting and fixing 30mm thick solid core type non decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with aluminium fittings such as hinges, tower bolts , handle , cleats and sand blocks and taxes all complete as per buillind specification and direction of E/I.

Providing reinforcement (Round bars confirning to I.S 432 dia . In mm (I.S 2062 Gr A) of 6 & 8mm …

Providing T.M.T. Reinforcement (10 mm dia) FE 500 of following dia Rods as per approved design and drawing including carriage of M.S. Rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. (APPROVED BRAND - TATA/ SAIL)

8mm @ 79086.94 per MT

10mm dia

12 mm ,16mm,20mm

Supplying , fitting and fixing M.S Grill made of 20x6 cmm M.S. flat as per approved designe and drawing properly fabricated with joints contineous fillet welded and finished smooth carriage of grill to work site hoisting as per building specification and direction of E/I

Providing & fixing FAN HOOK of 16 mm dia M.S. bar, 1 M long bent to required size and shape, placed in position and fluid in the R.C.C. slab-beam at the time of casting all complete as per building specification and direction of E/I.

Supplying fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2 mm at 100mm. Centres and with M.S flat diagonals 20x3mm with top and bottom rail of tee iron 40x40x6mm with 38mm dia steel pulleys complete with bolt nuts locking arragements stoppers handles including applying of primer coat of red lead paint carriage hoisting and taxes all complete as per building specification and direction of E/I

Providing disignation 75B one brick flat soling joints filled with local sand including cost watering taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying 25 mm thick kotah stone slab flooring of approved size, texture and colour over 19 mm thick base of lime mortar (1:1:1) (lime putty: surkhi : coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I

Providing and laying 25 mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12 mm thick base of cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Providing and laying 6 mm precast white glazed tiles in walls over 12 mm cement mortar (1:3) and jointed with with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I with grade A coloured 15cm x15cm tiles.

Providing and laying 6 mm precast colour glazed tiles in walls over 12 mm cement mortar (1:3) and jointed with with white cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I with grade A coloured 15cm x15cm tiles.

Providing 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all loads and lifts of water, scaffolfing taxes and royalty all complet e as per building specification and direction of E/I.

Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I

Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I

Providing 1.5mm cement punning including curing, carriage of water with all loads and lifts as per building specification and direction of E/I.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxea and royalty all complete as per building specification of E/I.

Providing two coats of Plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. (INSIDE PAINTING)

Providing two coat of synthetic enamel paint of approved shade and make over new wooden surface including preparing the surface after cleaning, removing dirt scales smoke grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing one coat of wax polishing with mansion, waxpol or equivalent approved quality of wax polish over old or new wooden surface including leaning the surface after removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification and direction of E/I

Providing 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills& railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.

Dismantling patent stone floor including stacking servicable materials in countable stacks within 15 M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling old plaster and pointing cement or lime and raking out jionts to 15mm. Depth,watering and disposal of unserviceable materials with all leads all complete as per directions of E/I

Dismantling lime terrace upto av. 115mm. Depth , with chisel and hammer including stacking servicable material in countable stacks within 15 M. lead and disposal of unservicable materials with all leads all complete as per direction of E/I.

Taking down old door and window shutters including stacking and serviceable materials within 15m lead and disposal of unserviceable materials with all leads all complete as per direction of E/I

TAKING DOWN CHAUKHATS in door including stacking servicable material in countable stacks within 15 M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 250 mm wide brick drain in cement mortar (1:6) with av 150 mm clear depth and 250 mm apron including cost of earthwork involved with 75mm cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

35 mm Thk. Factory made POLYVINYL Choride PVC Door Shutter made of Styles and rains of a UPVC hollow Section of size 60x30mm and wall thickness2mm(+-0.2mm) with inbuilt decorative moulding edging on one side.The styles and rails mitred and joint at the corners by means of ms .galvanised/plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screw.The styless of the shutter reainforced by inserting galvanised M.S tube of size 25x20 mm and 1mm(+-0.1MM) Wall thickness. The lock rail made up of h section a upvc hollow section of size 100x30 mm and 2 mm (+ 0.2 mm) wall thickness fixed to the shutter styles by means of plastic galvanised M.S.u cleats the shutter frame filled with a upvc multi chambred single panel of size not less than 620mm having over all thickness of 20mm and 1 mm (+0.1mm) wall thickness the panels filled vertically and tie bar at two places by inserting horizantally 6 mm galvanised M.S road and fastened with nuts washers complete as per manufacture's specification and direction of Engineer -in-charge.

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5 mm, made out of extruded 5mm extrude rigid pvc foam sheet, mitred at corners and joimed with 2 nos of 150 mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm MS.square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame.The door frame The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacture specification and direction of Engineer-in-charge.

Providing and fixing prestressed steel door frames conformingto IS 4351 manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges jamb,lock jamb,bead and if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means including M.S . pressed butt hinges 2.5 mm thick with morter guards lock strike-plate and shock absorbers as specified and applying a coat of apporved steel primer after pre-treatment of the surface as direction ofEngineer-in-chare.FIXING WITH ADJUSTABLE LUGE WITH SPLIT END TALL TO EACH JAMB

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to IS:1562/ISO 13006 of approved make, in all colours and shades ,laid on20mm thick cement mortar 1:4 (1 cement:4 coarse sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete . Size of Tile 600 X 600

chequerred precast cement concrete tiles 22mm thk in footh path & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles Dark shade pigment using ordinary cement

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete

Providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacture) of 1st quality conforming to IS 15622 of approved make in all colours shades except white lvory, Grey Fume red brown laid on 20 mm thick cement mortor 1:4 (1 cement: 4 coarse sand), jointing wth grey cement slurry 3.3kg /sqmm including pointing the joints with white cement and matching pigments etc, complete.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²

Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socket ed pipes. 110 mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

PVC Single Tee with door of 110 x 110 x 110 mm

PVC Bend 110 mm

PVC Shoe 110 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms Inlet mouth of rain water pipe

Providing applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth copmlete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and anufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade New work(Two more coat [email protected]/10 sqm over and including priming coat of Exterior primer [email protected] kg/10sqm) Acrylic Smooth exterior paint (OUTER)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge With float glass panes of 4.0 mm thickness

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. After two days of proper curing applying a second coat of

Brick -8 km (1k+7p)

sand-10 km

Chips-22 km

Metal-22 km

local sand - 3 km

Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required. Make-Havells/ Legrand/ Polycab/ C&S/ Hager/ABB . Group C

Point re-wiring in existing conduit: Rewiring for light point / fan point / exhaust fan point / call bell point 1.5 sqmm FR PVC insulated copper conductor single core cable in existing surface / recessed Steel / PVC conduit including dismantling as required. GROUP B.

Supply and Fixing Light Plug Point with Modular Type Accessories: Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required. Make-Havells/ Legrand/ Polycab/ C&S/ Hager/ABB/HPL /Anchor

Supply and Fixing Light Plug Point with Modular Type Accessories: Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required. Make-Havells/ Legrand/ Polycab/ C&S/ Hager/ABB /HPL/Anchor

Wiring in Existing Conduit ( Circuit / Sub-main wiring in PVC Conduit): Supplying, and drawing of following sizes FR PVC insulated, copper conductor, single core cable in surface/recessed in existing PVC conduit/ flat heavy duty PVC casing as required (cost of Heavy duty PVC casing flat type included ).Make-Havells/ Polycab/ KEI/Finolex/KEC 3x1.5 Sqmm

3x2.5 Sqmm

3x4 Sqmm

S/F PVC Conduit: Supplying and fixing PVC conduit along with acessories in surface/ recess including cutting the wall and making the same in case recessed conduit as required. 20 mm

Power Plug Wiring in PVC conduit (2x4 sq. mm): Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. Make-Havells/ Polycab/ KEI/Finolex/KEC

Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of FR PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.( Make-Polycab/Incab/Rajnigandha Cables/Havells/ KEI/RR Kable/) 2x1.5 Sqmm + 1x1.5 sqmm earth wire

2x2.5 Sqmm + 1x2.5 sqmm earth wire

S/F Rewireable double pole/ TP&N Switch Disconnector : Supplying and fixing following capacity double pole/TP&N sheet metal swich disconnector fuse unit in existing metal board with rewireable types fuses, including drilling holes in metal board, making connections, etc. as required 32 amp, double pole

63 amp, Double pole as incomer

S/F SP MCB DB: Supplying and fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (Without MCB/RCCB/ISOLATOR). Make-Havells/ Legrand/ Polycab/ C&S/ Hager/ABB / HPL /Anchor 12 ways Double Door for power

S/F 'C' series SP MCB: Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Min breaking capacity of MCBs-10K. 6/32A Single Pole

40A DP MCB

50/63 amps , DP

S/F Modular type Switch / Socket: Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. Make-Havells/ Legrand/ Polycab/ C&S/ Hager/ABB / HPL /Anchor 5/6 AMPS, one way switch

5/6 Amps, 3 pin socket outlet

Supplying and fixing Modular type blanking plate-Supplying and fixing modular blanking plate on existing modular plate switch box excluding modular plate etc. as required.

S/F Modular type electronic fan regulator: Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

S/F Modular Boxes, base, & Cover plate: Supplying and fixing following size /modules GI box along with modular base and cover plate for modular switches in recess etc as required. 2 module(78mmx78mmx45 mm)

4/5 module(78mmx140mmx50 mm)

8/9 module(78mmx230mmx60 mm)

ITC fluorescent fitting directly on surface :- installation testing and commissioning of Pre - wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc, directly on ceiling / wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper conductor.

ITC fluorescent fitting with down rods :- installation testing and commissioning of Pre - wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc, including supply & fixing ball and socket arrangement , 2 nos down rods of 20mm dia x1.6mm steel conduit upto 30cm. connection with 1.5 Sq. mm. FR PVC insulated, copper conductor.

Ceiling Rose: Supplying and fixing 2 pin,5 amp ceiling rose on existing junction box/wooden block including connection etc as required.

ITC Exhaust Fan upto 450 mm sweep: installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required.

Copper Earth Plate Elecrode:- Earthing with copper plate 600mmx 600mmx 3mm thick including acessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.(but with charcoal or cock and salt) complete etc. as required. ( DBs 1 no+ 2 nos for Lightning).

P/F and laying 8 SWG copper wire at 0.5 metre below ground as earth strip electrode including soldering welding etc. as required.

P/F and Lightning Conductor Finial: Providing and Fixing of lightning conductor finial , made of 25mm dia 300mm long, GI tube, having single prone at top with 85mm dia 6mm thick GI base plate including holes etc. complete as required.

GI lightning conductor tape in horizontal run - Providing and fixing of GI tape 20mm X3mm thick on parapet or surface of wall for lighting conductor etc complete as required.

GI lightning conductor tape in Vertical run - Providing and fixing of GI tape 20mm X3mm thick on parapet or surface of wall for lighting conductor etc complete as required.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 35sqm directr in ground including excavation, and refilling the trench etc as required , but excluding sand cushioning and protective covering.

S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing glass cover, IP 66 protection , LUMINOUS EFFICARY>110 LM/W,with lens in existing pole/pipe for supply voltage 100- 270v AC 50 Hz . Luminare shall be confirm to IS : 10322 part -5 / section -5 and shall be complete with all necessary accessories as required 75/80W LED Flood light

SITC of floowing rating recess/ surface mounted LED round / square shape down light luminare with pressure die cast housing for single phase supply voltage . Luminare shall be confirm to IS:10322 part-5 / section-2or IEC :62722 with all necessary accessories as required. 6/7 W LED Round Down light

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50 Hz , single phase supplying etc. complete as required . 20/22W LED Tube light.

Supply , Installation , testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS : 374:2019 including wiring the down rods of standard length (upto 30 cm) with 1.5 sqmm FR PVC insulated , copper wire suitable for 230V 50 Hz , single phase supply etc. complete as required. 1400mm (56'') Ceiling Fan.

Supply & laying of following XLPE/ PVC insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and 1.1 kV grade ( Confirm to IS: 1554, part-1). Make-Polycab/ KEI/ Havells/RR Kable/Phinolex/ 2CX10 sq. mm armoured AL Cable for main power supply

Supply & laying of following XLPE/ PVC insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and 1.1 kV grade ( Confirm to IS: 1554, part-1). 2CX16 sq. mm armoured AL Cable for power supply to the main panel, ( Make-Polycal/Incab/Rajnigandha Cables/Havells/KEI/ RR Kable)

Supply of Decorative Ceiling Fan: Supplying and fitting of 1200 mm Sweep regular/ decorative model AC ceiling fan , including connection with 1.5 sq mm copper wire, down rod of standared length(upto 30cm) withall accessories as required. Make :- Polar/Bajaj/Crompton / Havells / GEC.

Supply of Exhaust metal Fan 230mm(9"): Supply and fitting of 230mm(9"), 230V AC metal exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required( Make- Polar/ Havells/Crompton)

Supply of Metal Exhaust Fan 12"(300mm): Supply of 12"(300mm), 230V AC metal exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required( Make- Polar/Bajaj/ Havells/Crompton)

Supply of Exhaust metal Fan(15") for Kitchen: Supply and fitting of 380mm(15"), 230V AC metal exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required( Make- Polar/ Havells/Crompton)

LED tube with Batten 20W/22W : Supplying and fixing of wall mounted LED 20W /22W tube + batten and electronic driver and accessories as required. ( Make -Wipro or Equivalent)

LED Bulb 9W/10W : Supplying and fixing of LED 9W /10W bulb and accessories as required. ( Make -Bajaj / Havells/ Philips)

LED Floodlights75/80W :Environmental friendly, new generation,aesthetically designed, ultra modern LED floodlight luminaire with high diecast housing and IP66 protection.( make Havells/Bajaj/ Philips)

Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I. dia

Horizontal - 32mm

Vertical -32mm dia weight not less than 600gm

40 mm dia weight not less than 700gm

25 mm dia weight not less than 375 gm

Cutting chhajja or corince for laying G.I. / C.P.V.C pipe and restoring the same with R.C.C. (1:2:4) brick work in cement mortor (1:4) as per specification and direction of E/I.

Making holes in walls for laying G.I. / C.P.V.C pipe and restoring the same after pipe laying as per specification and direction of E/I.

125 mm thick wall

250 mm thick wall

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. Mirror (600 x 450mm) of 6mm thick 3mm plywood

Supplying the follwing bathroom fittings all complete Special Type of CP Bathroom fittings for VIP buildings

bib cock long thread

Pillar cock (long neck)

Angular Stop Cock (long Thread)

Toilet Paper holder

Glass self 22"

brass towel rail

C.P. brass soap dish

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I. With 10 Liter Low Level pvc cistern

Supplying, fitting and fixing viterous white glazed earthen ware E.W.C. of Parry Emdustan or any other.... all complete as per specification and direction of E/I. With 'P' trap - 10 ltr. Low level PVC cistern

Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of exacavted earth within initial lead and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I. 25x 0.450 x 0.600

LAbour for laying, fitting and fixing NP2 R.C.C. spun pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leakproof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complet as per specification and direction of E/I. 150mm dia R.C.C. spun pipe

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.

Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank.

Supplying NP2 R.C.C. hume pipe with collar as as per I.S.S. 458-1971. 150mm dia

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm witha pair of 15 mm C.P. brass pillar taps

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including jointing of pipes and fittings with one step CPVC solvent cement trenching , refilling and testing of joints complete as per direction of Engineer in Charge.

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

Providing and fixing CP brass bib cock of approved quality conforming to IS :8931 15mm nominal bore

Providing and fixing PTMT grating of approved quality and colour. C.P. Gratings Circular type - 100mm dia

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion i) Single tee with door

i) Single tee without door 110 x 110 x 110 mm

Bend 87.5 110 mm bend

vi) 110 mm shoe plain.

vii) 110 mm P Trap (Supreme) P.V.C.

viii) 110mm Plain floor Trap

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5

NON SCHEDULE ITEM

Slim Downlighter(Surface) 6W LED: Supply erection and commissioning of LED 6W, ultra sleek surface-mounted, round round LED downlight with all accessories as required. ( make : Wipro/Bajaj-BGSLO SLEEK 6W SURFACE WH RD OR Euivalent)

LED Surface mounting 15W(for Portico) : Supplying and fixing of LED 15W surface mounting round down light and accessories as required. ( Make -Bajaj-model BGSLO SLEEK 15W / Havells/ Philips/ Wipro/Crompton)

Supplying, fitting & fixing Health Feacet (Hand Shower) of Jaquar Code no.-ALD - IVY - 583

Provding and laying of 110mm dia. P.V.C. pipe for outlet of water to outlet drain including all accessories ,l.e lubricants, solvent cement, clamp, ring, sockets etc.(SUPREME SW.R.) 110mm

Providing and fixing PVC Pipe fittings with all accessories (supreme make)

i) 110 mm Door Tee (Supreme) P.V.C.

ii) 110 mm Plain Tee (Supreme) P.V.C.

iii) 110 mm Door Bend (Supreme) P.V.C.

iv) 110 mm Plain Bend (Supreme) P.V.C.

v) 110mm 45 degree offset (Supreme) PVC

vi) 110 mm Cowel (Supreme) P.V.C.

vii) 110 mm P Trap (Supreme) P.V.C.

viii) 110mm Plain floor Trap

Driling up to 30 m

Supplying UPVC casing pipe of 125mm dia to use as 4" dia -do -complete job

Labour charge for filling good quality metal fiter (50mm to 100mm size ) with all lift as per specification and direction of E/I. 22/7(3.0x3.0)/4

Labour charge for filling good quality of stone metal fiter (20mm to 63mm size) 22/7(3.0x3.0)/4

Supplying and laying 150mm Coir mat in nylon net. 22/7(3.0x3.0)/4

Providing and laying of 150mm dia P.V.C. pipe for outlet of water from Catch Besin to water Recharging Pit all accessories l.e lubricants, solvent cement, clamp, ring, sockets, Bends etc. (SUPREME SW.R.)

Add 18% GST

Add 1% Labour cess 1%

Raj Enetrprises