CA NO.CWE BLY/GE (W) / 53 OF 2024- 2025COMPREHENSIVE MAINT UNDER AGE B/R-II AT GE (WEST) BAREILLY

Amount

M&L for brick work with fly ash old size brick in CM 1: 4 straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls built in built in CM 1:4 complete all as specified and directed.

M&L for old size brick work with except brick straight or curved on plan exc 6m mean radius built in in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class B old size bricks, straight or curved on plan exc 6m mean radious built in CM 1:6 complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar includinguding all quoins, arches, pillars etc complete all as specified and directed.

M&L for water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/ RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement. (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating per sqm in each coat with roller application. Note: (i) Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.) (ii) Water proofing compound shall be measured and paid separately under respective item.

Demolition of cement concrete (un-reinforced) including terrazzo, tiling etc of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Supply only liquid water proofing compound all as specified and directed.

M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed

M&L for 40 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floors, finished rough to receive floor tiles complete all as specified and directed

Dismantling floor, hearth or wall tiling/terrazo including cement mortar bedding complete or in patches and removing rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300 x 200mm x 7mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles over and including plastering 10mm thick in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 450 x 300 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, complete all as specified and directed.

M&L for glazed ceramic coloured tiles 600 x 300 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles over and including plastering 10mm thick in CM 1:4, complete all as specified and directed.

M&L for non skid ceramic coloured tiles, Edge cut, 7 to 8 mm thick (Square) size of each tiles 400 x 400 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screeding 15mm thick in CM 1:6, complete all as specified and directed.

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square) size of each tiles 400 x 400 mm as in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including plastering 10mm thick in CM 1:4 complete all as specified and directed

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square) size of each tiles 300 x 300 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screeding 15mm thick in CM 1:6 complete all as specified and directed.

M&L for vetrified tiles light shade 7 to 8 mm thick (square) polished, size of each tiles 600 x 600 mm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including screeding 15mm thick in CM 1:6 complete all as specified and directed.

M&L for vetrified tiles light shade 7 to 8 mm thick (square) polished, size of each tiles 600 x 600 mm in vertical surfaces etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including plastering 10mm thick in CM 1:4,complete all as specified and directed.

M&L for ceramic tiles light shade 7 to 8 mm thick (square) size of each tiles ( 600 x 600 mm ) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including screeding 15mm thick in CM 1:6 complete all as specified and directed.

M&L for ceramic tiles light shade 7 to 8 mm thick (square) size of each tiles ( 600 x 600 mm) in vertical surfaces etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including plastering 10mm thick in CM 1:4,complete all as specified and directed.

M&L for vetrified Light shade tiles 7 to 8 mm thick (square) polished, size of each tiles 600 x 1200 mm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including screeding 15mm thick in CM 1:6 complete all as specified and directed.

M&L for vetrified Light shade tiles 7 to 8 mm thick (square) polished, size of each tiles 600 x 1200 mm in vertical surfaces etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including plastering 10mm thick in CM 1:4,complete all as specified and directed.

M&L for 25 mm thick cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) as screed under tiles finishing sufaces even and smooth without using extra cement complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C1 using 20mm graded stone agg in plinth protection, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Machine pressed cement concrete factory made coloured glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade, machine pressed of pattern and colour as approved by GE over and including 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed.

M&L for Machine pressed cement concrete factory made coloured glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of 80 mm thickness, M-40 Grade, machine pressed of pattern and colour as approved by GE over and including 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed.

M&L for coloured glazed polished chequered cement concrete tile of size 30cm x 30cm x 25mm thick With mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes, complete all as specified and directed.

S&F PVC(SWR) 110mm dia soil waste and rain water drainage pipes single socketed in any length with rubber ring joint fixed to wall including dismentling of cast iron /PVC/AC/SGSW pipes in cement mortar and taking out of trenches, if required complete all as specified and directed

S&F PVC (SWR) 110mm dia bends complete all as specified and directed.

S&F PVC(SWR) 75mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint fixed to wall including dismentling of cast iron /PVC/AC/SGSW pipes in cement mortar and taking out of trenches, if requiredcomplete all as specified and directed

S&F PVC (SWR) 75mm dia bends complete all as specified and directed.

S&F rotational moulded polythene water storage tanks tripple layer white in colour (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed

S&F rotational moulded polythene water storage tanks tripple layer white in colour(cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs of 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like over and including screed bed of 15mm thick 1:6 cement mortar etc complete all as specified and directed

Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed.

M&L for grinding and polishing to old terrazzo flooring/ skirting/ kota stone complete all as specified and directed.

S&F in repair 20 mm dia Mild steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S&F in repair 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S&F factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete all as specified and directed by the Engr-in-Charge, manufacturer's specification and drawing.

S&F factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive) complete all as specified and directed.

S&F PVC boards 19/20 mm thick any colour/ prelaminated as in cabinets incl sshelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc. complete all as specified and directed.

M&L for 3 mm thick E board classic (everest /equivalent) tiles for insulation and accoustic purpose 60X60 cm with and including powder coated galvanium iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling incl taking down old ceiling with frame and making good disturbed surface complete all as specified and directed .

S & F in repairs stainless steel wire mesh 0.63 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F 150mm helical door spring complete all as specified and directed

S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanised iron with all fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanised iron with all fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F in repair tubular, towel rail brass chromium plated 20mm dia D type 60 cm long between flanges complete all as specified and directed

S&F in repair 2 in 1 chromium plated 15 mm bore dia wall mixture with connection for shower arragement complete all as specified and directed.

S&F in repair vitreous china wash down water closet (padestal pattern) white complete, black incl connection to drain pipe and to flushing pipe anti syphonage pipe etc complete all as specified and directed.

S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed.

S&F in repair plastic water closet white seat, black cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair brass CP hand shower (health faucet) with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specified and directed.

S&F in repair water jet of EWC chromium plated with PVC connection complete all as specified and directed

S&F in repair PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed.

S&F in repair vitreous china wash hand basin with pedestal of size 55X45X82cm complete including fancy 15 mm dia CP pillar tap, 32 mm diaCP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

S&F in repair fancy type 125mm size brass CP shower rose complete all as specified and directed.

S&F in repair 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.

S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

S&F in repair 15 mm bore dia fancy type chromium plated brass angle/ stop valve type complete all as specified and directed.

S&F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed.

S&F CP heavy duty extension pieces 15mm bore and 25 mm long in repairs complete all as specified and directed.

S&F in repair PVC toilet cabinet with mirror of size 20"X16" of selecred quality complete all as specified and directed.

S&F in repair grating doom 100mm dia of CP with or without holes (minimum weight 50gms) complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste pipe and coupling including bedding in cement mortar on dwarf walls including brackets and connecting union to pipe overall size of sink 915 x460 mm and bowl size 410x330x160 mm complete all as specified and directed.

S&F in repair kitchen sink without drainage board made of stainless steel 1 mm thick with plugs washers and waste pipe and coupling including bedding in cement mortar on dwarf walls including brackets and connecting union to pipe overall size of sink 460 x 390 mm and bowl size 410x330x160 mm complete all as specified and directed.

S&F in repair plate rack made out of 1 mm thick stainless steel sheet of size 75 cm x 90 cm x 25 cm with all internal fittings (as per sample) complete all as specified and directed

S&F in repair of PVC corner set of three of size (12'X12" ,9"X9" and 6" X6" ) with railling and complete all as specified and directed.

S&F in repairs Chromium plated toilet paper stand complete all as specified and directed.

S&F in repairs Chromium plated towel ring complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off single shutter/ double shutter from the frame)exc 1.5 sqm and n exc 4.00 swm incl removing from the premises complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removing from the premises complete all as specified and directed.

M&L for providing FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge

M&L in providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton (made by sticking 2 nos PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing

S&F 2nd class hard wood chowkhat or frames, plain solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 complete all as specified and directed.

S& F flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood glazed and Skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (a) supplied and fitted to chowkhats complete all as specified and directed.

S&F Butt hinges, medium weight, Stainless steel and fixed of size 100mm complete all as specified and directed.

S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed complete all as specified and directed.

S&F aluminum anosided handle 150mm long of extruded section and fixed complete all as specified and directed.

S&F in repair double legged door stopper of aluminium alloy with rubber complete all as specified and directed.

S&F in repair door seal of aluminium powder coated with cotton mat of length 90 cm to 100 cm long complete all as specified and directed.

M&L for 125 mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over one coat of pink primer over 10 cm width or girth complete all as specified and directed.

M&L for preparation of new iron surface and two coat of synthetic enamel paint ovar a coat of red oxide primer complete all as specified and directed.

Taking down hood covers of rolling shutters of area not exceeding 6 sqm loose brackets plates or guide properly greasing helical spring,shafts, and guide, channel for proper functioning of rolling shutter of any size and refixing covers in position after repairs complete all as specified and directed.

S&F in repair Bib tap 15 mm bore dia standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed.

S&F in repairs pillar tap 15 mm bore dia standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed.

S&F in repairs 15 mm bore dia stop cock/ angle valve standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed.

S&F in repair Vitreous china wash down water closet single piece (Cascade pattern) with seamless flushing cistern square design duroplast slim seat cover, slow falling seat cover size 69x37x73CM / 66x35x71 complete, including connection to drain pipe etc complete all as specified and directed.

S&F in repair Vitreous China table/counter top wash basin of suitable size including SS bottle trap, with SS waste coupling, cp mixer for hot & cold (Make Jaguar, cera, Hindware, waste pipe complete all as specified and directed.

S&F in repair brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed.

S&F Brass CP Hand Shower with 15mm dia 1.2 Meter long flexible tube and wall hook screwecd for iron pipe fancy type long body complete all as specified and directed.

S&F in repair glass corner shelf in Bathroom 225 x 225 mm with chromium brackets and fixed with screwed in bathroom corners complete all as specified and directed.

S&F in repair stainless steel of AE- SI 316 grade tubular towel rack including a pair of CP brass bracket complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated/semi courrugated sheet of 0.50 mm thick and colour having tensile strength of 550 mpa as in roof covering /clading, ridges,to wall fixed with screw including dismantling of existing roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain galvalume sheet of 0.50 mm thick and colour having tensile strength of 550 mpa as in roof covering /clading, ridges,to wall fixed with screw including dismantling of existing roof covering complete all as specified and directed.

S&F mild steel framed work as in doors or gates of angle or hollow with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 complete all as specified and directed.

S&F in repair aluminium powder coated (minum 50 micron) anodised partition wall with aluminium frame of size : a) Single Groove Section: 100 x 40 x 1.20 mm thick b) Double Groove section: 100 x 40 x 1.10 mm thick duly fitted with neosprene rubber beading,frosted glass panes 5 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels including securing with 'U' channels at top joining partatio complete all as specified.

S&F in repair powder coating aluminium frame for doors, windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F in repair powder coating aluminium door/window/ventilator shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Sheet glass, ordinary quality and glazing with oil putty in square but n exc 0.5 Sqm in each pane 5.5mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture complete all as specified and directed.

S&F in repair Mortice lock, verticle type size 100 mm mild steel complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulator made up of minimum 1.25 mm thick aluminum alloy sheet foundation box main body with stainless cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Repair to steel windows by replacing all old friction hinges with box type hinges, making the windows functional including all necessary welding etc as required at site complete all as specified and directed.

S&F in repair wall panelling of plastic vinyl composite of size 3050 x 254 x 8 mm thick with wooden/plane surface waterproof, termite proof, chemical resistant of light weight fixed with wooden screw with rawl wall plug complete all as specified and directed.

S&F in repair wooden flooring size 1215 x 195 mm and thickness 8.3 mm direct pressure laminated according to EN 13329 for glueless installation heavy domestic and light commercial use EN 13329 lavel of use 22 including under layer of 2 mm EP and polythene layer complete all as specified and directed.

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in lintel, slabs supported on wall,landing, balconies, shelves, chajjas and like including bonding agent complete all as specified and directed.

S&F form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves,Chajjas including support over lungs etc also splays between floor and beams etc. completed all as specified and directed.

S&F TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0 complete all as specified and directed.

S&F Mild steel TMT bars 5mm dia and over upto and including 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0 as in stirrups, spaces and binders complete all as specified and directed.

Cleaning of roof/ walls of any size buildings including complete removal plants grown with roots and treated with lime and filling the hole properly by cement mortar 1:3. Note: After completing the job user signature should be taken on record register complete all as specified and directed. Note-Each building count as each job

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes with pressure jet machine, etc. exc complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM 1:4 including finishing the surface even and fair complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM 1:6 including finishing the surface even and fair complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM 1:6 including finishing the surface even and fair and including taking down existing defective cement plaster on brick or stone masonary racking out joints, hacking for key & scrubbing down with water etc. complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying Two coats of distemper oil emulsion with airless electric sprayers over 1 mm thickness wall care putty of complete all specified and directed. Note :- (i) Application to be done through authoried apllicator manufacturer. (ii) Putty surface to be rubbing down with sander machine after getting dried all as directed to obtain a smooth & even surface.

M&L for 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra Cement and including taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified and directed.

M&L for 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling & chajja using CM 1:4 finished even and smooth without using extra cement and including taking down cement plaster on brick wall/ stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely complete all as specified and directed.

M&L for 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling & chajja using CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of weather proof exterior emulsion paint complete all as specified and directed. (Note : Colour and patterns to be applied as per new colour scheme approved by GE)

M&L for preparation of newly plastered surface of ceiling and applying two coats of distemper oil emulsion with airless electric sprayers over 1 mm thickness birla wall care putty of complete all specified and directed Note :- (i) Application to be done through authoried apllicator manufacturer. (ii) Putty surface to be rubbing down with sander machine after getting dried all as directed to obtain a smooth & even surface.

S&F anodised aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :100x40mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F anodised aluminium sliding windows and frame with movable shutter ( sliding on minimum two PVC roller of best quality) on two tracks Aluminium composite panel shutter fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

M&L for stainless steel (AISI 304 Grade ) Non magnetic multilayer nikle chrome plated for multipurpose utensil container including frame work telecscopic channels, handles etc as reqd and complete all as specified and as dircted utensil sample, design and pattern of each basket to be approved by GE the foloowing size in each kitchen. (a) plain basket 510x470x100mm or 520x485x100mm or 530x505x150mm slace godrej code 6126 Baan code LKY2PB 2014 -Evershine size 520x485x90mm of 03 nos (b) multisize plate basket of size 510x470x150mm or 520x485x150mm or 436x500x200mm (Clear depth 500mm) 02 nos make Silk Elnora BAAN code LKY-3CS214- Ever shine size 520x485x90mm approved by GE (c) Cutlery Basket, with Perforated bottom and side of compacted -slots for holding cutlery of size 510x470x100mm or 520x485x100mm or 144x468x50 (Clear dpth of 500mm) 02 nos make Silk Elenora (Asian Paint) code 600, size 530x505x100mm (Godrej Product code 6134 BAAN Code LKY2PC214/Ever shine size 520x485x95mm (d) Plain basket of size 510x470x200mm or 520x485x200mm or 486x500x200mm 02 Nos make Silk Elenora (Asian Paint) code 600, size 53x505x200mm- Godrej product code 6128 BAAN code LKY 2PB218- Evershine size 520x485x180mm (e) pull out with 2 basket each of size 150x485x80mm or 100x485x80mm 01 Nos make Sleek Elenora (Asian Paint ) code 250 size 180x500x590mm / Godrej product code 6141 baan code LKYNS2SP6/Ever shine size 610x485x90mm (f) dust bin as reqd 01 Nos Make 200 series of Hettich

Taking down wooden/ steel door of garrages exc 2 sqm each complete all as specified and directed.

S&F steel rolling shutters (thickness of lath 1.25 mm), with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

S&F in repair fiber sheets 1.0 mm thick of any colour having high tensile strength fixed with existing chain link fencing or on post with self screw and nut bolts all necessary fittings complete all as specified and directed. Note : -Sheet colour approved by GE

M&L for mild steel steel work in tubular hollow section of framing for fiber sheets, rail including special shaped washer etc complete all as specified and directed.

M&L for plaster of paris fancy moulding pattern in corners of ceiling in triangula shape of size 75 mm x 75 mm including finished upto the required mark complete all as specified and directed.

M&L for POP false ceilig includng GI framing, main member C shaped spacing not exc 1m c/c having weight 300 to 350 gm per RM and cross member U shaped spacing exc 500 mm c/c having weight 250 to 300 gm/RM and C section fixed on parameter wall with screws and rawl plug including hanging arrateement to RCC slab/shade wth L shape member exc 105 m (wieght not less tha 120 gm/RM) and wire mesh of dia 0.50 to 0.56 mm weight not less than 350 gm/sqm fixed with steel screws of GI framing including taking down of existing ceiling and applying two coat of luxury emulsion (Royal) complete all as specified and directed.

S&F in repair vertical venetian blind of 100 % polyster of width 100 mm and thickness 0.45-0.63 mm with tolerance (+- 0.04mm) of light grade 4-6 with aluminium channel complete all as per manufacturer instructions and as directed.

M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) over and including rendering 10 mm thick in cement mortar 1:4 including dismantling complete all as specified and directed.

Taking down carefully existing Aluminum/ copper point wiring (light/ Fan / Socket/Power Point) complete fittings etc and making good to disturbed surface of wall/Floor etc to match the existing surface/ finishes complete all as specified and directed.

M&L for concealed point wiring for One light/fan point controlled by one switch 5/6 Amp one way with 1.5 Sqmm (Nominal area) PVC insulated,unsheathed, multi stranded Copper conductor cable drawn in and including PVC rigid PVC conduit 25mm or higher size with all its fittngs and accessories for one 3 pin/6 pin 15 Amps socket out let point independent alongwith PVC insulated cable with multistranded copper conductor 1.5 Sqmm (nominal area) continuous earth wire, and connected to earth dolly including fixing of 1.20 mm sunk pressed steel terminal box/ MS modular box suitably flushed to wall with 3mm thick Hylum sheet cover/ white colour modular plate with cover for housing switch, socket regulator etc fixed with screws & cup washers including making good complete all as specified and directed.

All as per item No.153 here in before but for socket outlet 3/5 pin 5 amp. on the same board complete all as specified and directed.

All as per item No 153 here-in-before but for 5 Amps 3/5 Pin point on independent board complete all as specified and directed.

All as per per item No 153 here-in-before but for one light point controlled by two Nos of 2 way switches complete all as specified and directed.

All as per item No. 153 above but wiring with 2.5 Sqmm (Nominal area) PVC insulated,unsheathed, multi stranded Copper conductor cable drawn in and including PVC rigid PVC conduit 25mm or higher size with all its fittngs and accessories for one 3 pin/6 pin 15 Amps socket out let point independent alongwith PVC insulated cable with multistranded copper conductor 2.5 Sqmm (nominal area) continuous earth wire, and connected to earth dolly including fixing of 1.20 mm sunk pressed steel terminal box/ MS modular boxe suitably flushed to wall with 3mm thick Hylum sheet cover/ white colour modular plate for housing switch, socket regulator etc fixed with screws & cup washers including making good complete all as specified and directed.

S&F switch flush type 5/6 Amp SP one way complete all as specified and directed.

S&F switch flush type 5/6 Amp SP two way complete all as specified and directed.

S&F switch flush type 15/16 Amp SP one way complete all as specified and directed.

S&F in repair ceiling rose 2/3 terminals, complete all as specified and directed.

S&F in repair lamp holder PVC Angular/ pendent/ bakelite complete all as specified and directed.

S&F in repair Switch socket combination 2 in one 6 and 16 Amp flush type complete all as specified and directed.

S&F in repair buzzer, capton ding dong, AC, 230V, sigle pole complete all as specified and directed.

S&F in repair bell push switch flush type , complete all as specified and directed.

S&F socket outlet ,3/5 pin 6 amp flush type complete all as specified and directed.

S&F socket outlet 2 in one, 3/5 pin 6 and 16 Amp flush type complete all as specified and directed.

S&F in repair Modular switches 1 way, 6 A, 1 module complete all as specified and directed.

S&F in repair Modular switches 1 way, 16 A, 1 module complete all as specified and directed.

S&F in repair Modular sockets 6 A,-2/3 pin combined 2 module complete all as specified and directed.

S&F in repair Modular sockets 6 A/ 16 A,-2/3 pin combined 2 module complete all as specified and directed.

S&F in repair Modular fan regulators step type, 120 W, 2 module complete all as specified and directed.

S&F in repair White cover plate with frame,2 module complete all as specified and directed.

S&F in repairs White cover plate with frame,3 module complete all as specified and directed.

S&F in repair White cover plate with frame,4 module complete all as specified and directed.

S&F in repairs White cover plate with frame,8 module complete all as specified and directed.

S&F in repairs White cover plate with frame,10 module complete all as specified and directed.

S&F in repair White cover plate with frame,12 module complete all as specified and directed.

S&F in repair modular metal flush box,1/2 module complete all as specified and directed.

S&F in repair modular metal flush box,3 module complete all as specified and directed.

S&F in repair modular metal flush box,4 module complete all as specified and directed.

S&F in repair modular metal flush box,6 module complete all as specified and directed.

S&F in repair fan regulator resistance/electronic step piano type single phase 230 volt complete all as specified and directed.

S&F in repair Hylem sheet 3mm thick of size 9'' X 11'' including cutting of sheet for fixing switch/socket complete all as specified and directed.

S&F in repair Hylem sheet 3mm thick of size 8'' x 5'' including cutting of sheet for fixing switch / socket complete all as specified and directed.

S&F in repair Hylem sheet 3mm thick of size 5'' x 5'' including cutting of sheet for fixing switch / socket complete all as specified and directed.

S&F in repair MCB SPN 32 to 40 Amps 240 volts.10kA, comnplete all as specified and directed.

S&F in repair MCB SP 6 to 32 Amps 240 volts, 10 kA complete all as specified and directed.

S&F in repair MCB TPN 63 Amps,415V,10kA, complete all as specified and directed.

S&F in repair MCCB 16 kA,125Amp thermal magnetic and electronic earth leakage module complete all as specified and directed.

Taking down unserviceable existing sub main wiring with aluminium conductor stranded cable upto 6 Sqmm single core including earth wire from existing conduit or wooden battens including taking out unserviceable wooden gutties etc, matching with the existing surfaces complete all as specified and as directed.

S&F Sub main wiring concealed type with two single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduit with lock pattern incl. making good the disturbed surface complete all as specified and directed. (Note : PVC conduit and its accessories including 2 runs of cable 4 sq mm & 1 run of earth continuity conductor cable 4 sq mm unsheathed shall be measured and paid as single unit).

S&F Sub main wiring concealed type with two single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size incl. making good the disturbed surfaces complete all as specified and directed. (Note : PVC conduit and its accessories including 2 runs of cable 6 sq mm & 1 run of earth continuity conductor cable 6 sq mm unsheathed shall be measured and paid as single unit).

S&F in repair vertical loadline sheet metal enclosure double door , triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper busbar and IP- 54 & K 09 protection with the inbuilt provision for fixing of 1 No MCCB 125 Amps capacity and 12 Nos MCBs inside of DB , with metal door and flush to wall incl grounding and cutting in existing wall and making good disturbed surface with two coats of white/ colour washing/ distempering etc to match the existing complete all as specified and directed.

S&F in repair double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 4 ways complete all as specified and directed.

S&F in repair double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 8 ways complete all as specified and directed.

S&F in repair double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 12 ways complete all as specified and directed.

S&F in repair 4 Pin CFL lamp 36 Watt complete all as specified and directed.

S&F in repair 2 Pin CFL 18 W lamp/LED bulb thread type complete all as specified and directed.

S&F in replacement LED fitting with PVC extruded battern 20 watt 4 feet White colour complete all as specified and directed.

S&F in replacement LED fitting with PVC extruded battern 10 watt 2 feet White colour complete all as specified and directed.

S&F in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size and taking down of Old unsv Panels of any type complete all as specified and directed.

S&F in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement of PVC non metallic casing caping of 25 mm size with accessories including dismentaling/takingdown of old unserviceable/broken PVC conduit/cashing caping fixed on surface/concealed inclduing making good the disturbed surface complete all as specified and directed

S&F in replacement PVC insulated Flexible twin core,copper cable multistranded 24/.0020sqmm, 1100 V grade complete all as specified and directed.

Taking down ceiling fans 1200/1400 mm sweep & removing/cleaning of dust properly, oiling and greasing of bearing including re-fixing and connecting up with all requisite accessories complete all as specified and directed.

M&L for re-winding of burnt fan motor of 1200/1400 mm sweep including internally and externally cleaning of fans and removing the burnt coil and re-winding of fans by super enameled copper wire of appropriate size and re-assembling the fans and connecting with flexible copper wire of one mtr length and testing after repair complete all as specified and directed.

Taking down exhaust fan of 450/300 mm sweep and removing/cleaning the dust properly including oiling and greasing complete all as specified and directed.

M&L for re-winding of exhaust fan motor of 450/300 mm sweep with appropriate size of super enameled copper wire, including re-assembling the fans and connecting with flexible copper wire of one mtr length complete all as specified and directed.

S&F in repair Condenser 2.5 Mfd complete all as specified and directed.

S&F in repair bush of fans of any size complete all as specified and directed.

S&F in repair insulating rubber real including replacing nuts, bolts with washers complete all as specified and directed.

S&F in repair shaft of fans (as per sample) of suitable size complete all as specified and directed

S&F in repair of fan pins of suitable size for various type of fans / ceiling fans complete all as specified and directed.

S&F in repair flexible wire 23/0.0076 PVC insulated copper conductor twin core complete all as specified and directed.

S&F in repair fan down rod made out of 15 mm dia medium grade GI pipe, Med grade including threading on both end of pipe, drilling holes etc. as required including primer complete all as specified and directed.

S&F in repair fan conopy, suitable for various type ceiling fan all as per sample complete all as specified and directed.

Shikhar ji Enterprises (BID ID -3497875)