Drilling of two no. deep bore wells along with installation of submersible pump motor set (5HP) and allied works at Gidi-C.

Amount

Part- A (Boring) Hydrological Survey for identification of aquifer layer

HYDT: Cost of drilling 225mm X 165 mm X125 meter deep bore well in all kind of soil and rock in rural areas for installation of pump set with dydraulic DTH Rig machine , all complete including supplying al materials , tools, drilling rig, Air Compressor and epuipments as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site (i) From 0 - 50 meter JH SOR DW & SD 115

HYDT: Cost of drilling 225mm X 165 mm X125 meter deep bore well in all kind of soil and rock in rural areas for installation of pump set with dydraulic DTH Rig machine , all complete including supplying al materials , tools, drilling rig, Air Compressor and epuipments as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site (ii) From 51 - 125 meter JH SOR DW & SD 115

HYDT: Cost of drilling 225mm X 165 mm X125 meter deep bore well in all kind of soil and rock in rural areas for installation of pump set with dydraulic DTH Rig machine , all complete including supplying al materials , tools, drilling rig, Air Compressor and epuipments as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site (iii) From 126 - 250 meter JH SOR DW & SD 115

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia aving minimum wall thickness 5.40 mm DSR 23.10.3

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Supplying rigid u-pvc column pipe 50 mm dia conforming to IS 4985

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp

Labour charged for lowering of 100m PVC pipe, submersible motor, pump, cable adopter etc. with testing of electric, hekper etc all complete job.( Analysis rate)

Supply of Plastic rope of dia. 20mm.

Supplying 150 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and Bronze impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. Submersible Pump 150 mm dia (with Bronze impeller) up to 8 stages 5.0 HP.

Fully Automatic Star delta oil immersed submersible control panel Three Phase, 415 V suitable for 5 HP pump ISI marked of approved make

Supplying, Flat flexible submersible cable with, copper conductor, PVC insulated, and PVC sheathed . 3 core 4 sq mm.

Part-B (External water Supply) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall18.7.3 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall18.7.2 20 mm nominal outer dia Pipes

Providing and fixing brass bib cock of approved quality : 18.15.1 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :18.17.1 25 mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.50 mm dia. nominal bore.18.12.6

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

Total impact of GST for the purpose of CTC

Archana Kumari

KIRAN DEVI

PUJA KUMARI

MAYANK TRADING

M/S RAMRAJ CONSTRUCTION