BLOCK WORK

No. figures Amount

1 Excavation for foundation upto 1.5 mt.depth including sorting out and 32.00 Cum 149.67

stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(A) Lose and soft soil

2 Providing and laying cement concrete 1:3:6 ( 1 Cement , 3 Coarse 2.54 Cum 2965.76

aggregate , 6 crushed stone aggregate 20 mm nominal size) and curing

complete including cost of form work (A) Wall caps /copping

3 Providing laying ordinary cement concrete M 200 and curing complete 2.37 Cum 4116.76

including the cost of formwork and excluding the cost of reinforcement of

reinforced concrete work in ( A ) Foundations footing base of columns

and mass concrete etc.comp.

4 Providing and laying cement concrete 1:2:4 ( 1 Cement , 2 Course sand , 4 4.10 Cum 3481.28

Graded stone aggregate 20 mm nominal size ) and curing complete

excluding cost of form work. in. (A) for foundation and plinth.

5 Providing & laying Ordinary cement concrete M 200 with curing complete 2.10 Cum 12146.26

including the cost of formwork and excluding the cost of reinforcement of

reinforced concrete work in up to floor two level (B) COLUMNS (up to

plinth level)

6 Providing & laying Ordinary cement concrete M 200 with curing complete 6.00 Cum 8036.57

including the cost of formwork and excluding the cost of reinforcement of

reinforced concrete work in up to floor two level (A) BEAMS

7 Providing and Laying controlled cement concrete M200 and finishing 4.70 Cum 7141.71

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (ii) Slabs

,sill,shelves,Chajja.

8 Providing and Laying Ordinary cement concrete M200 and finishing 0.70 Cum 10219.39

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work up to floor two level (ii)

9 Filling available excavated earth (excluding rock) in trenches. plinth, sides 29.00 Cum 460.19

of foundations etc. in layers not exceeding 20 cm. in depth consolidating

each disposited layer by ramming and watering.

10 Filling in plinth with sand under floors including excavated watering, 28.00 Cum 289.06

ramming, consolidating and dressing etc. complete

11 Brick work using common burn clay building brick having crushing strength 31.00 Cum 4289.33

not less then 35 Kg/sq,cm. in for super structure in cement mortar 1:6(

Cement 6 sand) (B) Conventional

12 Providing TMT Bar FE 500D reinforcement for R.C.C. work including 1733.00 kg 76.21

bending, binding and placing in position

complete upto floor two level

13 Providing 15 mm thick cement plaster in single coat on 126.00 Cum 235.92

brick/concrete wall for interior plastering up to floor two level,

finished even and smooth in cement mortar 1:4(1 cement : 4 sand)

including floating coat of cement slurry etc. kg

Providing 10mm thick cement plaster in single coat on 42.00

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-

15 20 mm. Thick sand faced cement plaster on walls up to height 10 130.00 Sq.m. 329.29

meters above ground level consisting of 12 mm. Thick backing coat

of c.m. 1:3 (1 cement : 3 sand) and 8 mm. Thick finishing coat of

c.m. 1:1 (1 cement : 1 sand) etc. complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

16 Providing and laying 24" x 24" vitrified 8 mm thick tiles flooring over 89.10 Sq.m. 1415.77

20 mm ( average ) base of cement mortar 1:6 ( 1 Cement : 6 coarse

sand ) on new surface of fixing on existing flooring by athesive

materials including dismentalling of existing flooring and jointed with

colour cement slurry including finished with flush pointing and

cleaning the surface etc complete for light shade.

17 Wall painting with weather proof acrylic emulsion APEX ultima 130.00 Sq.m. 115.99

exterior paint of approved shade and brand on exterior wall surface

to give an even shade over and including a primary coat with alkaly

registance primer of approved brand after throughly brushing the

surface to remove all dirt and remaining of loose powedered

materials etc complete for all height.

18 Wall painting (two coats) with plastic emulsion paint of approved 168.00 Sq.m. 119.49

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered

smooth.Including Applying two coats of Birla or Asian acrylic lappy (

putty) and two coats of primer of approved brand and manufacture

on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.

19 Providing and fixing window having extruded aluminum Colour 1.62 Sq.m. 1583.95

anodized section frame main outer size 95mm x 24mm x 1.17mm

@ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters

of horizontal member size 40 mmx18mm x1.29mm @ wt.of

Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

20 Provoding and fixing flush door shutters, solid core construction with 16.59 Sq.m. 1797.77

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2) 35 mm

21 Providing and laying ceramic tiles 6mm thick in skrting risers of 2.34 Sq.m. 995.81

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry B)Ceramic tiles

22 Providing and fixing wash basin with single hole for piller tap with CI 2.00 No. 1529.03

or MS brackets painted white including sutting holes and making

good the same but including fitting in white colour incl. Providing

and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.&

Providing and fixing M.I. fisher union for washbasin or sink.

23 Providing laying and jointing in true line and level U.P.V.C. Pipe 15.00 Rmt. 72.65

(SCH - 40) line including fittings make or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. [A] 15 mm Dia.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

24 Providing laying and jointing in true line and level U.P.V.C. Pipe 15.00 Rmt. 91.84

(SCH - 40) line including fittings make or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. [B] 25 mm Dia.

25 Providing and fixing screw down bib taps of (A) Brass screw down 8.00 Each 186.83

bib tap polished bright' (i) 15 mm Thick

26 Providing erecting and fixing double coated Syntex or equivalent 1000.00 Lit 3.95

PVC. (ISI) mark water tank of reqd capacity each with all necessary

fittings & connection etc. comp on terrace

27 Providing. & laying(Two level or slopes)&jointing with stiff, mixture of 30.00 Rmt. 430.07

cement mortar in proportion 1:1 Salt glazed stoneware pipes

following nominal internal dia. incl. testing of pipes and joints

complerte with providing and laying c.c.1:5:10 [1 Cement, 5 Fine

sand, 10 graded stone Agg. 40mm nominal size] bedding for

stoneware pipes with necessary form work and curing complete

(A) 150 mm dia. [166 Avg. Bed Thickness]

28 Providing and fixing cast iron (spun) Nahni trap of the following 8.00 Each 615.63

nominal diameter of self cleaning design with C.I. screwed down or

hinged grating including cost of cutting and making good the walls

and floors 100 mm. Inlet and 50 mm. Outlet.

29 Providing & fixing C.P. brasss towel rails complete with C.P. brass 8.00 Each 603.19

brackets fixed to wooden plus with C.P. brass screws (B) 600 m x

20 mm size .

30 Providing and fixing gun metal check or non - return full way wheel 8.00 Each 186.83

valve of 25mm dia ESSCO, GMT , SAGAR or DELUXE brand. (i)

31 Providing and fixing gun metal check or non - return full way wheel 8.00 Each 420.63

valve of 25mm dia ESSCO, GMT , SAGAR or DELUXE brand. (i)

32 Providing and fixing ball cock of approved quality as (A) Copper 8.00 Each 132.89

Metal 25 mm dia.

33 Constructing brick masoary camber for underground C.I inspection 2.00 Each 7180.44

camber & bends with bricks having crushing strength not less than

35Kg/cm2 in C.M 1:5 cover with frame ( light duty ) 455mm x

610mm internal dimensions total weight of cover with frame to be

not less than 38Kgs ( wt. cover 23kgs and wt. of frame 15kgs

(R.C.C top slab with 1:2:4 mix ( 1 Cement 2 Coarse sand , 4 Graded

stone aggregate 20mm size ) foundation concrete 1:5:10 inside

plaster 15mm thickness with cement mortar 1:3 finished smooth

with a flouting coat of neat cement on wall and bed concrete etc

complete up to 1.50 Mt depth inside dimension 600mm x 850mm x

450mm.deep for pipe line with 3 or more inlets.

34 Providing sock pit of 5.00 cu m 1:3 volume including excavating 2.00 Each 3372.19

sand filling brick bats with dry masonry work at top for 45Cm height

including covering top width stone including providing vatas in Cm

1:3 with finishing curing etc as directed.

35 Providing and fixing 600mm x 450mm bevelled edge mirrror of 2.00 Each 833.73

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

36 Providing and fixing S.W. gully trap with C.I. grating brick masonry 4.00 Each 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.

(i) Square mouth traps.(B) 150mm x 100mm size P of R type

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

37 Providing and fixing water closet squatting Pan (Indian type W.C. 4.00 Each 632.06

Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to

be measured and paid for separately) (A) Vitreous China.(I) Long

pattern = White colour

38 Providing and fixing pillar tap capstan head, screw down high 8.00 Each 308.73

pressure with screws, shanks and back nuts (A) 15 mm dia.

39 Providing and fixing to wall, ceiling and floor galvanised Mild steel 20.00 Rmt. 787.40

tubes (Medium grade) of the following nominal bore, tube fitting and

clamps including making good the wall ceiling and floor.(F) 50mm

(Air Ventilation pipe)

40 Providing and fixing chromium plated brass half turn flush cock of 8.00 Each 263.77

approved quality including fixing in pipe line etc complete 25 mm

41 Providing and fixing in position cowl vent to pipes 75 mm dia. 8.00 Each 389.74

42 Constructing Septic tank and bed Concrete 1:3:6 (1 Cement, 3 1.00 Each 26657.94

Coarse sand , 6 crused stone aggregate 40mm nominal size ) and

P.C.C 1:2:4 15cm thick and brick work using common burnt clay

building 35kg/cm^2 in cement mortar 1:5 including inside smooth

plaster etc, complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

43 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.0 sq. mm & 6.00 Pt. 150.00

earthwire of 1.0 sq. mm (green) both are of ISI marked FR PVC

insulated multistrand copper wires in existing pipe duly erected,

complete with 6A Tissino Type ISI marked flush type switch / bell

push and accessories erected on polished wooden block / metal /

PVC box covered with 3 mm thick laminated sheet (PVC Copper

Wire, Avocab, Finolex, RR Cable brand only) and (Electrical

accessories i.e. Switches etc. CLIPSAL, MK, ANCHOR, TOYOMA

brand only) for concealed wiring. Light / Fan / Bell.

44 Point wiring for Independent PLUG Point with 2-1.0 sq. mm & 2.00 Pt. 173.00

earthwire of 1.0 sq. mm (green) both are of ISI marked FR PVC

insulated multistrand copper wires in existing pipe duly erected,

complete with ISI marked 3 pin 6A socket and 6A Tissino Type

switch erected with earth continuity connection erected on polished

board block / metal / PVC box covered with 3 mm thick laminated

sheet (PVC Copper Wire, Avocab, Finolex, RR Cable brand only)

and (Electrical accessories i.e. Switches etc. CLIPSAL, MK,

ANCHOR, TOYOMA brand only) for concealed wiring.

45 Point wiring for looped PLUG point with complete with ISI marked 2.00 Pt. 35.00

3 pin 6A, socket and 6A tissino type ISI marked flush type single

pole switch erected with earth continuity connection erected on

polished wooden block /Metal/ PVC Box covered with 3 mm thick

laminated sheet for open / concealed wiring.

46 Mains with 1.1 KV grade FRPVC insulated ISI marked stranded 35.00 Rmt. 24.00

Copper conductor wire in existing pipe erected with 1.5 sq.mm

copper conductor FR PVC insulated stranded wire of green colour

for earth continuity of following size (PVC Copper Wire, Avocab,

Finolex, RR Cable brand only) (a) 2 wire 1.5 sq. mm.

47 Mains with 1.1 KV grade FR PVC insulated ISI marked stranded 35.00 Rmt. 31.00

Copper conductor wire in existing pipe erected with 1.5 sq.mm

copper conductor FR PVC insulated stranded wire of green colour

for earth continuity of following size (PVC Copper Wire, Avocab,

Finolex, RR Cable brand only) (b) 2 wire 2.5 sq.mm.

48 Providing and erecting PVC casing patty conforming to ISS 30.00 Rmt. 25.00

complete erected with necessary fitting with adhesive solution (i) for

open execution.

49 Providing and erecting PVC corrugated flexibal conduct with require 3.00 Rmt. 13.00

nos. of coupling, PVC bushes, check nuts etc. complete of following

size 20mm.

50 Providing & erecting PVC corrugated flexibal conduct with require 3.00 Rmt. 17.00

nos. of coupling, PVC bushes, check nuts etc. complete of following

size 25mm.

51 Backlite lamp holder. 5.00 No. 15.00

52 Providing & erecting Bulk head fitting with glass wire guard rubber 2.00 No. 39.00

53 gasket & porcelain

Approved make G.F.holder

lampsuitable forV.

watt to 100Cat-III.

Watt Watt lamp 5.00 No. 14.00

54 Approved make fluorescent tube 120 cms 36/40 Watt erected, if 5.00 No. 61.00

required. Cat-III.

55 Providing & erecting sheet steel powder coated enclosure suitable 1.00 No. 337.00

for incorporating one / two nos. MCB (A) DP MCB.

56 Providing & erecting Sheet steel powder coated enclosure suitable 1.00 132.00

for incorporating one/two nos. MCB. (A) DP MCB

57 For using salt and charcoal / coke as required for pipe type earthing. 1.00 No. 127.00

58 Cast iron earth plate size 30 x 30 x 0.35 cms hurried in specially 1.00 No. 390.00

prepared 2.5 Mtr. deep earth pit complete with necessary G.I. strip

in G.I. pipe 2 mtr. long with coupling and G.I. plug for earthing of

switch gear, conduct run of power plug etc.

Total Rs.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

(i.e. Rs. Eight Lacs Forty Thousand Three Hundred Eighteen & Paise Forty nine only )

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ___________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a

change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Valia Bharuch