REPAIRS TO PAVER BLOCK DRAIN REPAIR SECURITY WALL PLASTERING FENCING POSTS BARBED WIRES GATES AND OTHER MISC B/R WORK AT URI AND RAMPUR UNDER GE 969 EWS

Amount

Demolition of PCC in ground floor and pavings n. exc 15 cm thick below or above ground level, complete all as specified and as directed.

M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone agg in foundations,filling and mass concrete) as in sub base of floors complete all as specified and as directed.

M&L 40mm thick PCC 1:2:4 type B 1 using 20 mm graded stone agg as in floor finish even and smooth using extra cement complete complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B 0 using 12.5 mm graded stone agg as in levelling course complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 ( using 20 mm graded aggregate) as in plinth protection etc laid in bays incl finishing the concrete surface even and smooth without using extra cement complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed.

M&L for Sand filling under floors/Pavement or in foundations including watering and consolidation.

M&L for interlocking paver block any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and as directed.

M&L for interlocking paver block any shape and size confirming to IS 15658 -2006 of 80mm thickness, M-40 Grade with grey cement and no pigment complete all as specified and as directed.

M&L for Chequred coloured tile size 300x300x20 mm using table vibrator or equivlent as in jointed and pointed in neat cement slurry over and included 15 mm thick screed cement mortar (1:6) and pigment size conforming and as specified & directed by Engr-in-Charge complete all as specified.

Granite (of any type) tiles 16 to 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing included 15 mm screed cement mortar (1:6) and pigment size conforming complete all as specified and as directed.

All as per item 12 above but on vertical surface such as dado,skirtings, etc over 10 mm thick screed in CM 1:4 complete all as specified and as directed.

Taking down existing fencing wire mesh of any description complete all as specified and as directed.

S&F Welded steel wire mesh febric fixed complete to steel members. Weight per sqm exc 4.00 Kg complete all as specified and as directed.

S&F in repairs galvanized two strand steel barbed wire 2.24mm dia barbed with 2.00mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail straining bolts incl. securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pin etc as directed (Each line of wire to be measured)

S&F chain link MS galvanished fencing of any size or type including line wires, any mesh, any size and type of standards, rails, straining bolt etc including provn of binding wire etc complete all as specified and as directed.

S&F mild steel screw bolt with hexagonal or square head at one end and screwed at the other end with washer & one hexagonal nut not exc 5 cm long & 5 to 10mm dia complete all as specified and as directed.

Material and labour for mild steel round bars 10mm dia and above as supporting horizontal bars in chain link fencing, incl binding and bonding complete all as specified and as directed.

Dismantling posts or struts of steel or RCC any section including taking out embedded portion from conrete or masonry and making good disturbed ground, complete all as specified and as directed.

M&L Preparation of new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a priming coat of Red oxide, zinc chrome primer, complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

S&F MS framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, wheel ,etc complete drilled for fixing to steel sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete conforming to Fe-410-W complete all as specified and as directed.

S&F Steel work in tubular/square tube trusses/purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and as directed.

Supply and fixing in angles iron post & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire incl all necessary drilling bolts or rivetting & similar work confirming to Fe- 410-0 or Fe 310-0 and flat iron 40x4mm fillets (for securing chain link fencing etc) complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any guage , thickness, including Nainital or similar pattern from roof covering and wall Cladding complete all as specified and directed.

S&F Pre painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

M&L for 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed.

M&L for 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed.

M&L for one coat of synthetic enamel paint preparation of old painted steel surfaces as in walls / roof trusses /purlins/rafters /angle iron posts etc complete all as specified and as directed.

M&L for preparing surfaces of new or previously untreated surfaces of steel or metal works and applying two coats of synthetic enamel paint over a coat of rex oxide primer over 10cm in width or girth complete all as specified and as directed.

Excavation in post holes each n exc 0.5 cum getting out, returning, filing in and removing earth or brocken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m in soft/loose soil and making good surface as per existing surface complete all as specified and as directed.

M&L for cement concrete 1:3:6 Type C-2 (using 40 mm graded stone aggregate) as in foundation filling or mass concrete complete all as specified and as directed.

Demolition of brick work built in CM or cement lime mortar complete all as specified and as directed.

M&L for walling or random rubble,uncoursed well bounded bedded and solidly hearted, built in cement mortar 1:6. complete all as specified and as directed.

All as per item No 36 here-in-before but except stone, complete all as specified and as directed.

M&L for bricks work built in CM mortar 1:6 with sub class 'B' bricks straight or curved on plan exc 6m mean radius all as specified and directed.

All as per item No 38 here-in-before but except bricks, complete all as specified and as directed.

M&L for brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 as in manhole/septic tank /soak well complete all as specified and as directed.

M&L for rendering 15mm thick on any faces of brick wall or concrete surface in CM 1:4 mixed with WPC @ 3% by weight of cement finished fair and even without using extra cement complete all as directed. Note : WPC shall be measured and paid separetely.

Supply only integral water proofing compound, complete all as specified and as directed.

Taking down cement plaster on brick wall including racking out joints hacking for key scrubbing down with water etc complete as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces even & fair complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in coping & the like including weathering slightly rounded or chamfered angles & throating,foundation etc including necessary form work, complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in beds of surface channels & drains including smooth finish complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete including forms, moulds etc complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any postion not otherwise specifically provided for, complete all as specified and as directed.

M&L for providing precast RCC 1:1.5:3 type A-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains , soak well etc and similar articles etc, set in CM (1:4) with plain faces including chamfered weathering throating etc incl necessary form work complete all as specified and as directed.

S&F mild steel deformed bars or TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No 50 above but 6 to 8mm dia, complete all as specified and as directed.

S&F in repair for RCC pipes class NP-3, 300mm dia laid and jointed complete with collars as required complele all as specified and directed.

All as per item No 52 above but 250mm dia pipe, complete all as specified and as directed.

S&F in repairs PVC (SWR) 110mm bore as soil waste and vent pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

All as per srl item No 54 above but 75mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius for 110mm pipe complete all as specified and as directed.

All as per item No. 56 above but for 75mm pipe complete all as specified and as directed.

M&L vitrified coloured ceramic tiles 10mm thick (square/rectangular) polished area of each tiles n. exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in whited or coloured cememtn to match Light shade tiles. all as specified including 15mm thick screed bed in CM 1:4 and dismantling old floor hearth or wall tile complete all as specified and as directed.

M&L for preparation of old surface including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing on old plastered or un-plastered surface of walls. Complete all as specified and as station policy or directed by engr-in-charge.

All as per serial item No.59 above but applying one coat of white washing on ceilings, complete all as specified and as directed.

All as per serial item No.59 above but applying one coat of oil bound distempering with emulsion on walls, complete all as specified and as directed.

All as per item no 59 here-in-before but applying one coat of cement base paint on walls of external surfaces, complete all as specified and as directed.

Preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint on Roof surfaces complete all as specified and as directed.

Note:- Schedule of credit Rs. 74,190.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S GHULAM RASOOL LONE (BID ID -3117692)

M/s SONA ULLAH LONE AND SONS (BID ID -3117804)

M/S GHULAM QADIR WANI AND SONS (BID ID -3117505)

M/S ESS EMM ENTERPRISES (BID ID -3117432)

M/S JAVID AND CO (BID ID -3117662)

ALI MOHD NAJAR (BID ID -3117529)

M/s ABDUL AHAD AND SONS (BID ID -3117678)

M/S KULWANT SINGH RAINA AND CO (BID ID -3117559)

M/S SUMJI BROTHERS (BID ID -3117501)