REPAIR TO JOINARY ALUMINIUM DOORS PVC DOORS WINDOWS FALSE CEILING AND ALLIED WORK IN SSE VIP BLDGS IN THE AREA OF AGE B R II UNDER GE ARMY NO 1 JODHPUR

Amount

Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area not exc 1.5 sqm each complete.

Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area exc 1.5sqm but not exc. 4 Sqm each complete.

Taking down shutter of any description area exc 1 Sqm but n. exc 2 Sqm each complete.

Taking down shutter & resecuring and refixing in same position of any description area exc 1 Sqm but n. exc 2 Sqm each complete.

Taking down steel windows/ventilator with frame of any description and any size complete

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawings.

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F 2nd class hard wood plain framed paneled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board upto commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated (Factory made shutters).

S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc divided into squares by Rails and styles , with plain chamfered or rounded mitered and rebated size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete.

S/F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, with or without coolar opening, complete with glazing bars, dovetailed or welded all as specified.

Ditto but without glazing bars

S&F Steel ventilator with top hung shutters with glazed bars including hinges steel peg stay etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs of 10 mm thick toughened glass as in door/window or partition complete including design etching work/sun control film as directed and all necessary stainless steel fittings, locking arrangement and arrangement like hinges, clips, handle etc, complete all as specified & directed by Engineer-in-charge.

S&F in repairs of 12 mm thick toughened glass as in door/window or partition complete including design etching work /sun control film as directed and all necessary stainless steel fittings arrangement like hinges, clips, handle etc, complete all as specified & directed by Engineer-in-charge.

Welding in repairs in steel windows hinges all as directed and as specified .etc.

S&F of framed work as in guard bars, grills, gratings and similar work confirming to FE 290, Gde-E-165 Etc.

S&F galvanised ms wire cloth 0.56mmm nominal dia of wire and average width of aperature 1.18mm complete.

S&F in repairs galvanised ms wire cloth 0.56mmm nominal dia of wire and average width of aperature 1.18mm complete.

S&F of 30-35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,one face is covered with decorative face veneer with lipping/frame to match

M&L for 18 mm thick Prelaminated particle board for cupboard shutter etc, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

M & L for decoraive laminates type 1 of 0.9mm thick surface finish, colour and pattern as approved, fixed with appproved adhesiveas per manufacturers instruction

S&F of 100 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised

S&F 100mm size SS butt hinges (ISI Marked) complete all as specified.

S&F 100mm size MS butt hinges medium weight (ISI Marked), rolled mild steel complete.

S & F for 100mm long, mild steel single action spring hinge all as specified and directed.

S&F Aluminium alloy, anodized, sliding door bolt (ISI Marked) of 300mm with hasp & staple (Bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete.

S&F 200mm alluminium, anodized, barrel tower bolts extruded section & fixed

S&F in repairs, 200mm alluminium, anodized, barrel tower bolts extruded section & fixed

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete.

S&F in repairs 150mm size extruded aluminium alloy handles, fabricated type anodized complete.

S & F of Floor door stopper 140 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F in repairs of Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg Aluminium (extruded section) body

M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads n exc 0.5 Sqm each

S & F of 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty or Aluminium Beading in square exc 0.5 sq m in each pane

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty/wooden beading in square not exc 0.5 sq. m in each pane

S&F Figured glass 3mm thick, pin head type and glazing with oil putty or wooden beading in squares not exc 0.5 sq. m in each pane

Taking down existing aluminium door shutters from carefulluy replacement of Rubbers Bushes, washers including greasing and oiling complete and refixing the door shutters in to the same openings and making complete functioning of aluminium door of any size.

S & F for Anodized Aluminium Frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F for anodised aluminium door shutters, aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc. complete all as specified.

S &F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluninium fittings such as peg stays 150mm long (1 No) hinges type B-21 100 mm long (2 No) suitable handle (1 No) in each shutter complete all as specified

S&F in repairs of Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty & fixed

S&F in repairs mortice latch with two loovers (Vertical type) mild steel body 100mm long and fixed.

Greasing and servicing only to existing rolling shutters, any type complete, area of shutter exc 5.0 and n.exc 10 Sqm each

All as above but area exc 10 Sqm and n.exc 15 Sqm

All as above but area exc 15 Sqm and n.exc 20 Sqm

S&F in repairs Steel rolling shutters, thickness of lath 1.0mm, with gear operated type (manual type) with chain wheel and hand chain, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete : push pull or manual type complete all as specified and directed by Engr-in-Charge.

M&L for preparation new or previously untreated surfaces of steel at any description over 10cm in width or girth and apply two coat of syntetic enamel paint complete over a coat of red oxide primer.

Dismantling of asbestos cement (Corrugated, semicorrugated etc) sheets in roof coverings.

S&F Pre-laminated galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets

M&L in repairs of 4 mm thick prepainted and designer type E-board in false ceiling (flat or sloping) fixed to and including anodised aluminium snap grid frame size of grid 605 x 605 mm, 4 mm GI wire for hanging and including dismantling, complete all as specified and as directed by Engg.-in-charge.

M&L for perforated particle particle board/tiles for insulation and accoustic purposes, 60x60cm in size, including S&F GI pre powder coated snap grid of size 605x605 mm including two coats of oil bound distempers after preparation of new ceiling board.

S&F 12mm thick plain gypsum board false ceilinng with GI frame work including all necessary drilling, cutting to fix electical items complete all as specified and directed with followings:-(a) GI sheet channel 30x25x20mm of 24 Gauge fixed with rawl plug and screws 450mm centre to centre along with perimeter of walls. (b) GI sheet channel made to shape 50x40x40mm of 24 guage placed @ 600mm centre to centre from perimeter of wall except long wall (in one span) (d) GI sheet 25mm wide & 20mm gauge suspenders fixed with steel fasteners to roof, ceiling @ 1200 mm centre to centre incl plugging in RCC slab and 75-100 mm wide POP moulded cornices, moulding fixed on ceiling/wall joints complete all as specified and directed.

S&F Stainless steel curtain rod 22 to 25 mm dia as per sample superior quality complete including purpose made brackets and Decorative fincals (round type with mirror optic finish) trade pattern for stainless steel curtain rods suitable for holding 22 to 25 mm dia as per sample as in repairs.

M/s Ajay kumar Garge

Nikhat nirman