Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹12.4 L+₹1.1 L (9.90%)Rejected-Finance 32 LOOTERY MOHAL ORDERLY BAZAR PO BARRACKPORE DIST 24 PARGANAS NORTH KOLKATA 700 120 W B | KOLKATA | 24 PARGANAS NORTH | WEST BENGAL | 700120 | L2 | Rejected-Finance Rejected due to higher rate from L1 | |
| 3 | L3₹13.8 L+₹2.5 L (22.1%)Rejected-Finance | L3 | Rejected-Finance Rejected due to higher rate from L1 | |
| 4 | L4₹14.2 L+₹2.9 L (25.8%)Rejected-Finance 296 N 183 2 JOGEN GANGULY STREET MONIRAMPUR BARRACKPORE DIST 24 PARGANAS N KOLKATA 700 120 W B | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L4 | Rejected-Finance Rejected due to higher rate from L1 | |
| 5 | L5₹14.6 L+₹3.3 L (29.3%)Rejected-Finance | L5 | Rejected-Finance Rejected due to higher rate from L1 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
2 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Barrackpore
GE AF Barrackpore Post Barrackpore Dist 24 Parganas North Kolkata 700120
REPAIR/REPALCEMENT OF EXTERNAL WATER SUPPLY SYSTEM AND MISC WORK AT KANCHRAPARA, JAFFARPORE, LOS DUM DUM AND BARASAT UNDER GE (AF) BARRACKPORE
2022_MES_555316_3
8381/BKP/AF OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE AF Barrackpore
Class-E,
Category- a(ii)
2 documents required · 2 mandatory
₹500
GE AF Barrackpore
₹20,000
Yes
19 Jan 2023
12 Dec 2022
4 Jan 2023
12 Dec 2022
2 Jan 2023
19 Dec 2022
Amount
Material and labour for 15mm bore (nominal) Gl tubing (medium grade) including all necessary pipe fittings (such as bends, elbows, tees, short pieces, connectors, back- nuts, reducer, diminishing pieces, caps, plugs and unions, etc.) and laid in trenches, on wall, under floor, under road etc., including making good disturbed portion including taking down old unserviciable existing GI pipe complete all as specified and directed.
All as per Item No 1.00 here-in-before but 20mm bore (nominal) and -ditto-.
All as per Item No 1.00 here-in-before but 25mm bore (nominal) and -ditto-.
All as per Item No 1.00 here-in-before but 40mm bore (nominal) and -ditto-.
All as per Item No 1.00 here-in-before but 50mm bore (nominal) and -ditto-.
All as per Item No 1.00 here-in-before but 80mm bore (nominal) and -ditto-.
All as per Item No 1.00 here-in-before but 100mm bore (nominal) and -ditto-.
Material and labour for 20 mm (outer dia of pipe) 3- layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water including all PP-R plain & brass threaded polypropylene random fittings laid in trenches or fixed on wall including taking down old unserviciable existing pipe complete all as specified and directed.
All as per Item No 8.00 here-in-before but 25 mm (outer dia of pipe) and -ditto-.
All as per Item No 8.00 here-in-before but 32 mm (outer dia of pipe) and -ditto-.
All as per Item No 8.00 here-in-before but 40 mm (outer dia of pipe) and -ditto-.
All as per Item No 8.00 here-in-before but 80 mm (outer dia of pipe) and -ditto-.
Material and labour for making connection of PP-R distribution branch with PP-R main of 16 to 40mm outer dia of pipe by providing and fixing tee including cutting and making fusion joint etc. complete all as specified and directed.
All as per Item No 13.00 here-in-before but 50 to 75 mm outer dia of pipe and -ditto-.
Supply and fix in repair 20mm dia PP-R Gate valves (brass insert) complete all as specified and directed.
All as per item No 15.00 above but for 25mm dia and -ditto-.
All as per item No 15.00 above but for 32mm dia and -ditto-.
All as per item No 15.00 above but for 50mm dia and -ditto-.
All as per item No 15.00 above but for 63mm dia and -ditto-.
Supply and fix nuprine rubber / leather gasket minimum thickness not less than 6mm suitable for tightening the GI flange or any other joints of 150mm dia with nuts and bolts complete all as specified and directed.
All as per Item No 20.00 here-in-before but 100mm dia and -ditto-.
All as per Item No 20.00 here-in-before but 80mm dia and -ditto-.
Supply and fix rubber gasket ring washer push on type suitable for DI pipe spigot socket push on joints of size 100mm including testing of leakage complete all as specified and directed.
Material and labour for painting of old painted surfaces of pipe of girth not exc 60cm of CI/GI/DI/MS pipeline and fittings exposed around the water supply installations of size 80mm/100mm/150mm size after removing complete existing paint and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed.
Material and labour for MS nuts, bolts , washer, machine cut, hexagonal 5cm to 10cm long, dia meter of neck 16 to 20mm or existing size as per site requirement complete all as specified and directed.
Material and labour for repacking stuffing box of sluice valve of 100mm dia spindle including taking apart and reassembling complete all as specified and directed.
All as per Item No 26.00 here-in-before but 150mm dia and -ditto-.
Supply and fix in repair 150mm dia sluice valves of cast iron body with forged brass spindle, class PN-1.6 and cast iron hand wheel head operated, both ends flanged, conforming to IS-1538 with neoprene rubber gasket joints, nuts, bolts (high tensile), and washers etc complete all as specified and directed.
All as per Item No 28.00 here-in-before but 100mm dia and -ditto-.
Supply and fix in repair 150mm dia cast iron Non return valve PN-1.6 flanged end swing type with nitrile rubber flap, conforming to IS-1538 complete all as specified and directed.
All as per Item No 30.00 here-in-before but 100mm dia and -ditto-.
Material and labour for cutting to existing 100mm dia CI/GI/DI water supply line for reducing to required length before laying and blockage removal, cleaning of particular joint etc and making good after repairing including leakage testing complete all as specified and directed
All as per Item No 32.00 here-in-before but 150mm dia and -ditto-.
Material and labour for cutting to existing 100mm dia CI/GI/DI water supply line for insertion of new tees, branches, etc including testing complete all as specified and directed
All as per Item No 34.00 here-in-before but 150mm dia and -ditto-.
Material and labour for Taking out 80mm dia sluice valves refacing, regrinding and refixing including testing complete all as specified and directed
All as per Item No 36.00 here-in-before but 100mm dia and -ditto-.
All as per Item No 36.00 here-in-before but 150mm dia and -ditto-.
All as per Item No 36.00 here-in-before but 200mm dia and -ditto-.
Material and labour for drilling and tapping CI/GI water mains (in position) for branch connections of the internal 15mm dia pipe complete all as specified and directed.
All as per Item No 40.00 here-in-before but 20mm dia and -ditto-.
Material and labour for cutting existing 15mm dia steel tubing for alterations or additions including screwing existing steel tubing for alterations or additions or lengthening screw on pipe to form connector complete all as specified and directed.
All as per Item No 42.00 here-in-before but 20mm dia and -ditto-.
All as per Item No 42.00 here-in-before but 25 / 32mm dia and -ditto-.
All as per Item No 42.00 here-in-before but 40 / 50mm dia and -ditto-.
Supply, laying, jointing and testing of 100mm bore ductile iron pipes with spigot and socket ends suitable for push on rubber joint centrifugally cast, class (K-7) confirming to IS 8329 : 2000 , inner side cement lining and outer side black bitumen coating and any length including push on rubber (EPDM) ring with ISI marked laid in trenches including taking down old unserviciable existing DI pipe complete all as specified and directed.
Supply and fixing of CI specials of any size such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing ,decreasing or double socket etc.) tee pieces, single branch "Y" junction, double branch, cross (all sockets or sockets and spigot) collars, caps and plugs including ring washer gaskets/ lead joints as per ground requirement including taking old unserviciable existing CI fittings complete all as specified and directed.
Supply and fix ductile iron fittings upto 200mm dia, Class K-7 special suitable for flange end joint conforming to IS-9523 : 2000 with inside cement mortar lining and out side zinc coating followed by bitumen coating including taking down existing unserviciable DI fittings complete all as specified and directed.
Material and labour for run lead joint for the CI spigot and socket joint of size 150mm dia including removal of existing unserviciable joint complete all as specified and directed.
All as per Item No 49.00 here-in-before but 100mm dia and -ditto-.
Supply only calcium hypo-chloride 65% to 70% chloride content in chlorine in granular for water treatment in factory sealed HDPE container of 45 Kg each complete all as specified and directed. Note:- Contractor shall produce original purchase voucher with manufacturers test certificate mentioning date of manufacturing, batch No, date of expiry of material before releasing payments.
Testing of water for chemical and biological analysis from accredited lab of PHED or central Govt licenced authorised labs and submitting test result sheet to AGE E/M (AF) office for further record all as specified and directed. Note: Expenditure for conveyance of collecting water sample at various locations of Jaffarpore, Kancharapara, LOS Dum Dum and Barasat shall be borne by the contractor.
Material and labour for construction of brick masonry valve pit of size 1200x1200x1000mm (internal dimension) with one brick thick in cement mortar (1:4), 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation concrete includig PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in bedding and coping, 10mm thick cement plaster in cement mortar (1:4) internally and externally upto 15 cm below ground level, providing valve pit 50x50x6mm angle iron frame all round the fixed point by means of 4 Nos hold fast 150mm long made out of flat iron 40 x 6 mm embedded in PCC block (1:2:4) type B-1 (using 20mm graded stone aggregate) of size 230 x200 x100mm. including provision of hinges welded with angle iron frame and mild steel cover 3 mm thick, mild steel handle of suitable and size welded with mild steel cover & suitable locking arrangement & applying two coats of synthetic enamel paint over a coat of red-oxide primer including dismantling of unserviciable existing valve pit complete all as specified and directed.
Material and labour for plain cement concrete (1:3:6) type B1 (using 20 mm graded stone aggregate) in pedestals pillars, foundation, coping and other misc supports to pipe lines complete all as specified and directed.
Material and labour for making good surface where cutting / excavated road / hard standing / path by filling with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) complete all as specified and directed.
Material and labour for boring under road / taxi track / PCC / drain for laying of CI/GI/DI/PP-R pipe of 150 mm dia without disturbing top surface complete all as specified and directed.
Material and labour for painting of sluice valves, NRV, ARV and reflux valve etc of size 80mm/100mm/150mm size after preparing the surface and applying two coats of synthetic enamel paint over one coat of zinch chrome primer including complete removal of existing treatement and including necessary replacement to existing gland packing complete all as specified and directed. Note:Cost of gland packing is deemed to be included in the quoted rate.
Material and labour for attending breakdown, leakage and repairing on requirement basis of CI/DI/MSGI/PP-R pipeline of size vary from 100mm to 150mm including fusion welding, cleaning and removal / replacement of pipeline and fittings of any length including welding of joints at any location for arresting leakages, inserting addl fittings such as Tee, elbow, union, Valves, flange etc complete all as specified and directed. Note: (i) Excavation, earth work and addl fittings if required shall be measured and paid separately under respective items. (ii) No vehicle and tools shall be provided by the department for attending breakdown. (iii) All complaints shall be recorded in a neat long register and put up to Engineer in charge for verification and site check. (iv) All kind of breakdown shall be rectified within 24 Hrs from the time of communication without fail. In case of failure, suitable amount shall be penalised from the contractor as recovery as decided by Engineer-in-Charge. (v) In case of damage to existing other assets on ground, contracftor has to rectify and to make good as per existing at his own cost.
Excavation in trenches n.exc. 1.5m wide and n.exc1.5m depth for foudation, trenches for laying of pipe line etc. and getting out in soft/loose soil complete all as specified and directed.
Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
Returning, filling in, inclsive spreading, levelling, watering and well ramming in layers not exc 25cm in type of soil complete all as specified and directed.
Supply and fix in repair 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.
All as per item No 62.00 above but for 25mm dia and -ditto-.
Supply and fix in repair 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
All as per item No 64.00 above but for 20mm dia and -ditto-.
All as per item No 64.00 above but for 25mm dia and -ditto-.
Supply and fix in repair 15mm dia gun-metal gate valves with iron wheel head, screwed both ends complete all as specified and directed.
All as per item No 67.00 above but for 20mm dia and -ditto-.
All as per item No 67.00 above but for 25mm dia and -ditto-.
All as per item No 67.00 above but for 40mm dia and -ditto-.
All as per item No 67.00 above but for 50mm dia and -ditto-.
Das and Brothers
TAPAS ENGINEERING CO
M/S A. J. CONSTRUCTION
NC BOSE AND CO
CHANDRA CONSTRUCTION AND CO
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .