Repair and Renovation of Jannayak Karpoori Thakur Hostel including PHE work, Bike/Cycle Parking stand, campus development and Open Gym in Arwal District for the year 2026-27.

GOVERNMENT OF BIHAR

BUILDING CONSTRUCTION DEPARTMENT

BUILDING DIVISION, BANKA

NAME OF WORK----------CONSTRUCTION OF BOUNDARY WALL OF INDOOR STADIUM BANKA FOR THE YEAR 2022-23.

ESTIMATED COST--- RS #REF!

THIS ESTIMATE IS FRAMED FOR THE CONSTRUCTION OF BOUNDARY WALL OF INDOOR STADIUM BANKA,BY THE EXECUTIVE

ENGINEER OFFICE, BUILDING DIVISION-BANKA.THE ESTIMATED COST OF THE ABOVE WORK IS MENTIONED ABOVE.

IN THIS ESTIMATE PROVISION OF PILLING IN FOUNDATION ,PROVISION OF R.C.C (1:1.5:3) IN FOUNDATION ,GRADE BEAM,COLUMN.

THERE IS PROVISION FOR 2 FT HIGH GRILL OVER THE COMPOUND WALL & WATER PROOFING CEMENT PAINT OVER 12MM THICK C.P

ESTIMATE HAS BEEN FRAMED ON THE CURRENT SCHEDULE OF RATES EFFECTIVE FROM 01.01.2022.

BUILDING,BANKA BCD,BANKA BCD, BANKA

NAME OF WORK----INSTALLATION OF DIFFERENT SPORTS EQUIPMENTS IN INDOOR STADIUM BANKA FOR THE YEAR 2022-23.

1 MR BADMINTON COURT MAT 2.00 EACH 215262.00 430524

2 MR PLAYERS LOCKER (BADMINTON) 1.00 EACH 231821.00 231821

3 MR BADMINTON PLOE WITH 100KG WEIGHT POWER 2.00 EACH 27876.00 55752

4 MR BADMINTON NET 2.00 EACH 2497.00 4994

BUILDING,BANKA BCD,BANKA BCD, BANKA

REPAIRING OF JANNAYAK KARPURI THAKUR BOYS HOSTEL ARWAL UNDER DISTRICT ARWAL FOR THE YEAR- 2026-27.

Cost of B.O.Q Rs 6164718.00

Date of Tender:

Time of Completion

S.N SOR ITEM DISCRIPTION Quantity Unit Rate Amount

1 14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 487.23 sqm 237.2 115571.00

2 13.80 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec.complete 9252.3 Sqm 9.7 89747.00

3 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 6402.85 Sqm 105.4 674860.00

4 13.92.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 6402.85 Sqm 86.4 553206.00

5 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : 2345.97 Sqm 137 321398.00

6 13.79.2 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shadeOld work 990.71 Sqm 61.1 60532.00

7 13.82.3 Painting with ready mixed paint of approved brand and manufacture all shades to give an even shade:Old Steel work (one more coats) 589.82 sqm 54.1 31909.00

8 13.82.4 Painting with ready mixed paint of approved brand and manufacture all shades to give an even shade:Old Wood work (one more coats) 321.56 sqm 54.1 17396.00

9 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (Thickness to be specified by the manufacture) of approvedmake in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 44.24 sqm 795 35171.00

10 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1 st quality conforming to IS :13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours such as white , Ivory , Grey , Fume , Red , Brown , laid on 20mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc,complete. 6.69 sqm 686.8 4595.00

11 111 supplying carpenter for repairing of door window etc 10 Each 479.6 4796.00

12 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 42.29 sqm 1775.3 75077.00

13 13.82.2 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:new wood work 105.72 sqm 83.5 8828.00

14 9.81 Providing and fixing bright finished brass handles with screws et complete: 0.00

15 9.74 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 0.00

16 9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 0.00

17 12.78.2 Providing and fixing on wall face unplastidsed- PVC(working pressure 4 kgfper sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110mm diameter 60 M 257.5 15450.00

18 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings /accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00

12.79.3.2 Single tee with door 110x110x110mm 15 No 193.4 2901.00

19 12.8 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 110mm Dia 20 EACH 182.72 3654.00

20 10.38.1 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows all complete with.4.0 mm thick glass panes. 22.09 SQM 876 19351.00

21 9.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 0.383 Cum 95670.7 36642.00

22 10.12 Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6 12.795 SQM 3038.9 38883.00

23 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 125 Kgs 144.5 18063.00

24 13.13.1+ 13.65.5 P/L 20 mm thick cement plaster on roof with water proofing materials. 988.211 SQM 240.4 237566.00

25 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore 25 Each 434.2 10855.00

26 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore15 mm nominal bore 10 Each 500.4 5004.00

27 18.16.1 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 15 Each 303.8 4557.00

28 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 5 Each 1068.5 5343.00

29 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms 5 Each 424 2120.00

30 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 20 each 101.7 2034.00

31 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass union 8 each 3723.2 29786.00

32 17.18.1 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 8 each 905.5 7244.00

33 18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 10 each 166.3 1663.00

34 0L04 CLEANER: FOR CLEANING SEWER,INSPECTION CHAMBER ETC 18 EACH 355.42 6398.00

35 19.30.1.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 2 each 4266.8 8534.00

36 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including For Concealed work 0.00

18.8.2 20 mm nominal outer dia Pipes 40 MTR 350.8 14032.00

18.8.3 25 mm nominal outer dia Pipes 40 MTR 463.1 18524.00

18.8.4 32 mm nominal outer dia Pipes 20 MTR 549.8 10996.00

37 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and 2000 LIT 9.7 19400.00

38 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete,including cutting and making good the walls andlevel white P.V.C.flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : 12 each 4470.9 53651.00

39 2.32 Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 1433.09 100 M2 697.4 9994.00

40 2.28 Supplying and Filling in plinth with local sand and under floors including,watering, ramming consolidating and dressing complete. 875.447 Cum 287.3 251516.00

41 11.73 Providing designation 100 A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 657.11 SQM 444.8 292283.00

42 4.1.2 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 104.078 Cum 4420.8 460108.00

43 4.3.1 Centring and shuttering including strutting,propping etc. andremoval or form work for 0.00

Foundations,footings, bases Columns 111.19 SQM 211.1 23472.00

44 11.79.1.1 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting 100 SQM 956.4 95640.00

45 23.2 Supplying and stacking of good earth at site including royalty but excluding carriage (earth measusred in stacks will be reduced by 20% for payment). 108 Cum 143.5 15498.00

46 23.10.2 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more tili the grass forms a thick lawn free form weeds and fit for mowing including supplying good earth if needed. 180 100 M2 670.8 1207.00

47 23.19 Edging with bricks laid dry length wise including excavation, refilling, consolidating with hand packing and spreading neatly susrplus earth within a lead of 50 m: 200 Mtr 40.9 8180.00

48 23.24.1 Supplying and stacking a' site dump manure from approved source, excluding carriage (manure measured in stacks will be reduced by 8% for payment) 108 Cum 278.9 30121.00

49 2.8.1 Earth work in excavation in foundation…..m in width or 10 sqm on plan) including dressing of sides and ramming ofbottoms, lift upto 1.5 m . including getting out the excavated soil and 41.629 Cum 360.7 15016.00

50 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per 102.576 SQM 283.3 29060.00

51 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3 (1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 12.385 Cum 4688.3 58065.00

52 5.22.7 Reinforcement for RCC work 0.00

53 5.9 Centring and shuttering including strutting,propping etc. and removal of form for. 0.00

5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 52.675 Sqm 211.6 11146.00

5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 33.519 Sqm 404.7 13565.00

5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts 8.067 Sqm 494.4 3988.00

54 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1:6 (1 cement: 6 coarse sand ) 4.235 Cum 4923 20849.00

55 11.4 52 mm thick cement concrete flooring with metallic concrete hardener topping under layer 40 mm thick cement concrete 1:2:4(1 cement:2coarse sand:4 graded stone aggregate 20 mm nominal size) 66.914 SQM 472 31583.00

56 13.18 15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick 40.342 SQM 229.3 9250.00

57 10.16.2 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a Hot finished welded type tubes 5092.18 Kgs 137.9 702212.00

58 10.19 Providing and fixing M.S. round holding down bolts with nuts and washer plates complete. 50 Kgs 82.7 4135.00

59 12.64x.4 Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and 220.24 SQM 1154.7 254311.00

60 Carriage of materials 0.00

B COARSE SAND 84.68 M3 553.7 46887.00

C STONE CHIPS 108.73 M3 1903.2 206935.00

Gross Total= 5927406.00

Amount after C.F 0.982= 5820713.00

61 AR PARALLEL BAR 2 Each 26041 52082.00

62 AR SPACE WALKER 2 Each 14021 28042.00

63 AR BICYCLE FOR OPEN GYM 2 Each 24670 49340.00

64 AR CHEST PRESS (DOUBLE) 2 Each 46599 93198.00

65 AR PULL CHAIR 2 Each 30153 60306.00

Contiengency 1% (Upto 1Cr)= 61037.00

GROSS Total= 6164718.00

EXECUTIVE ENGINEER

BUILDING DIVISION