Karnataka

Active

Works

Other Works

EXTENSION OF PARK NEAR NARIHALLA DAM AND PROVIDING FACILITIES AND OTHER AMENITIES IN SANDUR TALUK

Karnataka Neeravari Nigam Limited

KNNL Division TR Div No 1 Munirabad | MUNIRABAD, Karnataka

Amount: ₹4.2 CrCloses: 22 Jul 2026

Tender Value

₹4.2 Cr

EMD Value

₹6.2 L

Closing Date

22 Jul 2026, 9:30 pm

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Karnataka Neeravari Nigam Limited

Work Description

EXTENSION OF PARK NEAR NARIHALLA DAM AND PROVIDING FACILITIES AND OTHER AMENITIES IN SANDUR TALUK

Tender Information

Tender ID

307918

Reference Number

KNNL/2026-27/OW/WORK_INDENT4354

Tender Type

Open

Product Category

Other Works

Location

KNNL Division TR Div No 1 Munirabad

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredContractors Registration certificate enrolled under KPWD Class II or above

RequiredCopy of the Income tax returns ITR filed for the Financial year 2024-25 mentioning PAN number Assessment Year 2025-26

RequiredEmployees provident fund EPF registration certificate

RequiredValid copy of GST Registration Certificate

RequiredThe intending bidder should have satisfactorily completed not less than 90Percent of contract value, at least one similar nature of work such as Beautification /Development/Improvements of Park during the last five years. work value not less than 50Percent, of Rs. 245.24 Lakhs from 2021-22 to 2025-26

RequiredThe annual turnover from all classes of civil engineering works should be costing not less than i.e in any of the Two financial years during the last five years Rs. 980.98 Lakhs from 2021-22 to 2025-26

RequiredThe intending bidder should have executed in any one financial year the following minimum quantities of work usually 80Percent of the peak annual rate of construction during the last five years 2021-22 to 2025-26. The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer. 1. Earth Work excavation 10846.00 Cum 2. Embankment/Gravel 23696.00 Cum. 3. Structural Steel 12223.62 Kg. 4. CC Paver blocks 480.00 Sqm. 5. Chain link fencing 900 Sqm

RequiredThe following key and critical equipment for the work. List of plant/machinery. 1. Excavator Own 01 Hire 01. 2. Vibratory roller Own 01 Hire 01. 3. Concrete mixer Own 01 Hire 01 4. Water tank Own 01 Hire 01

RequiredLiquid asset and/or availability of credit facilities of not less than for unconditional credit lines/ letters of credits / certificates from nationalized banks Rs. 147.14 Lakhs for meeting the fund requirement etc

RequiredBid Capacity Assessed available tender capacity AxNx1.5 - B

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending bidders are advised to visit the site of work before submission of the tenders

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the employer as security deposit in any form given below for an amount equivalent to (as per FD 456 EXP/12/2022 Banglore Dated: 10-08-2022) (beyond 31.03.2023) 5% of the contract price plus additional security for unbalanced tender in accordance with clause 25.5 of ITT Clause 44 of the condition of the contract. However in case of reservation tender Security deposit is payable shall be deducted in every running bill and in case of 1& final bill the entire security deposit will be deducted from the final bill

The necessary certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e-tender document. The Original certificates/documents shall be produced on or before stipulated date and time for verification. Scanned signature of the bidder/authorized representative of the bidder shall be attached while uploading bid document

If any of the dates mentioned above happen to be a general holiday, the next working day holds good

The Technical bid will be opened first and there after the financial bids of those qualified in technical bid will be assessed on payment of tender processing fee. The financial bid will be opened subjected to the conditions that Electronic EMD payment is confirmed in the E-tender portal

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever

Corrigendum will be published in web site for all modifications/corrections if any

The intending bidders should note that, if any of lands either in part/parts or whole required for the work is not acquired by the Nigam, it shall be the responsibility of the bidder to take possession of such land and start the work by the consent of the land owners before commencement of work at no extra cost to the Nigam and no claim whatsoever relating to non availability of land would be entertained

The contractor should mention their recent correct postal address and e-mail address in the declaration form

All materials like steel, cement etc., required for the above work should be procured by the contractor only at his own cost. And these materials will have to be got tested by the competent authority before put to use

The contractors shall send the authorization letter for their representatives duly attesting their signature

Maintenance period or the defect liability period for this work is 12 months from the date of completion of work

As per the Karnataka building and other construction workers welfare cess act 1996, 1% of the bill amount will be deducted from the bills

Tenders will be opened on the due date in presence of the contractor or their Authorized representatives

The payment of bills of this work will be made as and when the letter of credit is received under the same head of account from KNNL/Government of Karnataka

The contractors should adhere to the accepted action plan submitted by him under any circumstances without linking to the pending bill payment of the work

Typo-graphical errors if any will not be the ground for any claims by the Contractor

The contractor should furnish the name of the individual /firm with address and Telephone numbers with place of registration, year of incorporation etc

The tender processing charges paid by the bidders are not refundable even if the tenders are cancelled

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders

The tenderer has to make his own arrangement for procurement of all materials required for the work. There is no departmental supply of materials. Contractor should procure only ISI mark materials and submit necessary quality control certificates from the authorized quality control authority, before execution

Sub leasing of work in any form is prohibited

Electrical work should be got done through registered electrical contractor

No quarries are approved by KNNL for materials. The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard

The rates includes all leads and lifts and work shall be carried out as per the instruction of Engineer-in-charge .All specifications are as per relevant IS codes in vogue and Indian Road Congress. The rates for the specification in the Schedule -B includes all lead and lifts irrespective of the distance and height, no extra claim will be entertained for additional lead and lifts

If Nigam wishes to engage third party inspecting agency for the said work, apart from the Quality control authorities and field tests of Nigam, the contractor should co-operate with the third party and quality control authorities

The validity period of EMD shall be for a minimum period of 225 days from the date of opening of the tenders

EMD of the unsuccessful bidders will be refunded only after the acceptance of tenders by the competent authority (clause 21 of the Formal Tender Notice)

The EMD of the successful Tenderer will be discharged when the Tenderer has signed the Agreement and furnished the required Security Performance

EMD amount and Amount put to tender will be as mentioned in the e-portal

The contractor shall make his own land arrangements for depositing the excavated stuff

Quarries and Barrow areas:- All materials for construction which are not available from the excavation shall be obtained from the quarries and borrow areas which shall be got approved from the Engineer. The Government will not make available and quarry or borrow area. The contractor shall himself explore the quarries and borrow areas required for the work and quote his rate for finished items of work for Bill of quantities accordingly with all leads and lifts. The leads considered in the sanctioned estimate are for the estimate purpose and shall be not be takes as the actual leads for materials during execution. No claims what so ever shall be made or entertained for any extra leads over and above the leads considered in the estimate, no claim of any compensations shall be due to the contractor on any account whatsoever, such as the quarries and barrow areas considered in the estimates being found unsuitable or inadequate in yield, the haulage routs reckoned being found unsuitable, the lead reckoned being found incorrect, the land owners obstructing the procurement and conveyance etc,. The government does not undertake to acquire land for the quarries barrow areas. It is responsibility of the contractor to negotiate with the land owners and acquire the land to himself, either permanently or temporarily and procure required materials. If the quarries/ borrow area do not give sufficient quantity of material, contractor shall make his own arrangements for additional quarries/ borrow areas with the approval of the engineer and bear the cost of investigations all leads and lifts, cost of land etc,. at his own expanses without claim for any payment over and above his tender rates Departmental investigation of the quarries borrows areas, on the basis of which the departmental estimates of cost are repaired have been made with the intention of having the most economical leads for the construction of work. If at any time after the entrustment of work, the departments finds quarries and borrow areas affording more economical leads and obtains position of such lands the departments reserves the right to order the contractor to bring the materials from such quarries and borrow areas and to reduce his rates in consequence thereof. In all such cases, whether the contractor compliance with the orders are not, the rates of concerned item of work in bill of quantities will be reduce for the quantities executed after two weeks from he date of communication of the order by an amount corresponding to the difference in the lead charges computed on the basis of the departmental schedule of rates adopted for preparing the comparative statement at the time of the acceptance of tender plus or minus percentage above or below in the original tender rates for that particular item of works

Further information can be had from the office of the Executive Engineer, Office of the Executive Engineer, KNNL No-01, T R Division, Munirabad during office hours. Contact e-mail id:trdmrb at gmail.com

Technical Criteria

General

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

The intending bidder should have satisfactorily completed (not less than 90% of contract value), at least one similar nature of work such as Beautification /Development/Improvements of Park during the last five years. work value not less than 50%, of Rs. 245.24 Lakhs from (2021-22 to 2025-26). The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned division. The cost of the work executed in the previous years shall be updated to 2025-26 at 10% per annum

Work Done Certificate

The intending bidder should have executed in any one financial year the following minimum quantities of work (usually 80% of the peak annual rate of construction) during the last five years (2021-22 to 2025-26). The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer. 1. Earth Work excavation 10846.00 Cum 2. Embankment/Gravel 23696.00 Cum. 3. Structural Steel 12223.62 Kg. 4. CC Paver blocks 480.00 Sqm. 5. Chain link fencing 900 Sqm

Work Done Certificate

Capabilities of Vendor

Contractors Registration certificate enrolled under KPWD Class II or above

PWD Registration Certificate (Class I/II/III/IV)

Employees provident fund (EPF) registration certificate

Valid EPF Certificate

Valid copy of GST Registration Certificate

GST Registration

Each tenderer should further demonstrate for work as shown below. The intending bidder(Individual) should further demonstrate: Availability by owning at least 50% of the required/specified key and critical equipment for this work and remaining 50% can be deployed on lease / hire basis for all the works provided, the relevant documents (commitment agreements, etc.) for availability for this work are furnished. The following key and critical equipment for the work. List of plant/machinery. 1) Excavator Own 01 & Hire 01. 2) Vibratory roller Own 01 & Hire 01. 3) Concrete mixer Own 01 & Hire 01 4) Water tank Own 01 & Hire 01

Others -- EQUIPMENTS DETAILS

Financial Status

Copy of the Income tax returns (ITR) filed for the Financial year 2024-25 mentioning PAN number (Assessment Year 2025-26)

ITR Filed Copy (Mentioning PAN)

The annual turnover from all classes of civil engineering works should be costing not less than i.e in any of the Two financial years during the last five years Rs. 980.98 Lakhs from (2021-22 to 2025-26). audited profit and loss account certified by a practicing Chartered Accountant along with the copy of income tax returns filed for the years indicated above should be furnished, Duly mentioning UDIN on Turnover certificate (from CA). The Annual turnover of Pervious Year shall be updated to 2025-26 at 10% per annum. Details as shown below

Audited CA Certificate of Annual Turnover

Liquid asset and/or availability of credit facilities of not less than for (unconditional credit lines/ letters of credits / certificates from nationalized banks) Rs. 147.14 Lakhs for meeting the fund requirement etc. The contractor should upload necessary documents issued by the nationalized banks in prescribed format

Line of Credit

Others

Assessed available tender capacity (AXNX1.5 - B)

Others -- BID CAPACITY

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.2 L

Important Dates

Last Activity

22 Jun 2026

Published

22 Jun 2026

Bid Opening

23 Jul 2026

Download Ends

13 Jul 2026

Pre-Bid Meeting

13 Jul 2026

BOQ Preview

•

EXTENSION OF PARK NEAR NARIHALLA DAM AND PROVIDING FACILITIES AND OTHER AMENITIES IN SANDUR TALUK

•

SlNo PARTICULARS OF ITEMS UNIT QTY RATE AMOUNT

•

1 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer - In area of thorny jungle 100 Sqm 524 508.2 266296.8

•

2 Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete. Sqm 40000 9.87 394800

•

3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Cum 14836.93 107.1 1589035.203

•

4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) M10 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 17.48 6454.35 112822.038

•

5 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 18747 497.7 9330381.9

•

6 Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be recovered @ Rs. 60.00/m3) Cum 15200 124.95 1899240

•

7 Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) Sqm 600 1121.4 672840

•

8 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra)600 x 200 x 100 mm Kerb Stone m 800 262.5 210000

•

9 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces Sqm 400 114.45 45780

•

10 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 38.88 6493.2 252455.616

•

11 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Sqm 1125 937.65 1054856.25

•

12 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. Kg 15279.52 142.8 2181915.456

•

13 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 490.83 145.95 71636.6385

•

14 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification- Buildings Tonne 10.61 73236.45 777038.7345

•

15 Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. cum 69.25 9288.3 643214.775

•

16 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Footings cum 94.16 7061.42 664903.3072

•

17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Column cum 14.88 12020.19 178860.4272

•

18 Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 450 1618.05 728122.5

•

19 Planting of trees : Digging pits of size 0.75M x 0.75 M x 0.75 M and filling up to 50% of the pits with top excavated soil and remaining 50% with sand (0.035 Cu.M) F.Y.M. (0.070 Cu.M) Red Earth (0.105 Cu.M) in the proportion 1:2:3 and planting with well established rooted plants. (exclusive of cost of plants). Normal soil No 320 322.35 103152

•

20 Supply of trees (Tabubea Avallindae, Tabubea Rosea, Tecoma Arjentia, Peltophorum Feriginnum, Saraca Indica, Callistemon Viminalis, Mimosups Elangi, Cordia Sabestana, Cassia Fistula , Cochlosperum, Alstonia Scholaris, Lagerstromia Speciosa, Terminalia Mantaly, Spathodia Campanulata, Azardicha Indica..) to Narihalla dam site including Transportation, Loading and Unloading charges No 140 1305 182700

•

21 Supply of Palm trees (Wodetia Bifurcata, Chrysalidocarpus Lutscene, Phoenix Rubeliani, Royastenia Regia, Cycas Circinalisis) to Narihalla dam site including Transportation, Loading and Unloading charges No 180 1760 316800

•

22 Planting of Shrubs : Digging pits of size 0.45Mx0.45Mx0.45M, filling up to 50% of the pits with top excavated soil and remaining 50% with the mixture of sand (0.007 Cu.M) :F.Y.M. (0.014 Cu.M) Red Earth (0.021 Cum.M) (i.e. in the proportion of 1:2:3) and planing with well established rooted plants) Normal soil No 2700 71.4 192780

•

23 Supply of Shrubs (Tecoma Capensis , Nerium Tall And Dwarf , Jetropa Pandoriflora, Cassia Biflora, Eugenia Christina, Tecoma Stans, Ixora Americances, Bougvanvillea Varieties, Crinum Asiaticum, Hamelia Patens, Sanchezia Nobilis, Euphorbia Carcasana, Eranthamum) to Narihalla dam site including Transportation, Loading and Unloading charges No 2700 130 351000

•

24 Bulbous bed Digging of 1.0 m x 1.0m x0.45m area and filling 50% of the area with top soil and remaining 50% area with 1:2:3 proportion of sand (0.0375 Cu.M):F.Y.M. (0.075 Cu.M) Red Earth (0.0112 Cu.M) and planting of well grown saplings / plants (Exclusive of cost of plants) Growing of Flower beds using corms/bulbs Normal soil No 1200 332.85 399420

•

25 Supply of Bulbous Bed plants (Spider Lilly, Canna Varieties, Zapharanthes Lilly, Amaran) to Narihalla dam site including Transportation, Loading and Unloading charges No 600 40 24000

•

26 Supply of Ground cover plants (Lantana Sellowiana, Lantana Depressa, Cuphea Hysopipholia, Wadelia Triloba) to Narihalla dam site including Transportation, Loading and Unloading charges No 600 40 24000

•

27 procurement of quality red earth/soil and heap around pit (1x1x0.15mt) 0.15 Cum 6650 76.01 505466.5

•

28 Supply of inputs such as sand,FYM,Red earth in 1:3:6 ratio.mixing and spreading the mixture to 7.50cm thickness wherever required 0.075 Cum 6650 114.35 760427.5

•

29 Procurement of quality lawn grass-Mexican Grass-Turf Sqm 6650 210 1396500

•

30 Labour Charges mixing Inputs as per prescribed proportion and quantity and spreading,applying fertilizers, digging, levelling,and dibbling with lawn grass at a spacing of 5cmx5cm & as per the direction of the Officer in charge of the work. Sqm 7400 59.1 437340

•

31 WORK TO BE UNDER TAKEN DURING MAINTENANCE:-Watering,Weeding, Sweeping, Lawn moving, Pruning of plants Transportation of plastic and other materials should be removed from the garden upto 8000m2 (upto 2.0 acres) Sqm/Month 6650 9.9 65835

•

32 Hunter pop sprinkler Each 40 3800 152000

•

33 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 63mm dia m 305.89 192.15 58776.7635

•

34 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.-32 A Each 4 253.05 1012.2

•

35 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.-40A Each 1 6424.95 6424.95

•

36 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.-40 A TPN Each 1 3196.2 3196.2

•

37 Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. Each 1 4609.5 4609.5

•

38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 1 540.75 540.75

•

39 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete-100 A 4 x 30 x 6 mm Aluminium Strips m 23 2588.25 59529.75

•

40 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.-50 x 50 x 6 mm m 15 414.75 6221.25

•

41 Fabricating supplying and mounting MS box made out SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.-14 SWG cm2 40000 0.53 21200

•

42 Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. Each 1 5085.15 5085.15

•

43 Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency> 1301m/w, nominal CRI >75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.-LED Floodlight 240W Each 16 23171.4 370742.4

•

44 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 16 170.1 2721.6

•

45 Fabrication, Supplying, Erection, Testing and Commissioning of ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grades 355 JO/ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot- dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5 mm2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual/power tool (Suitable reversible geared motor operating on 230/415V, 50Hz, shall be provide above 15 Mtr mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. (excluding foundation) as per technical data.-16 m - Top 150 mm and Bottom 410 mm dia Each 1 204750 204750

•

46 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990-4C x 4 mm2 m 200 236.25 47250

•

47 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975--16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) km 1 92838.9 92838.9

•

48 Lowering,laying and fusion welding Jointing for HDPE Pipes Grade PE 80 / PE-100 conforming to IS 4984-2016, of specified dia. including hydrualic testing and commissioning etc.(Contractor will make his own arrangements for procuring water for testing) for:CSR-2023-24-Vol5-BWSSB 63mm dia m 800 67.2 53760

•

49 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 12 mm dia. job 1 3937.5 3937.5

•

50 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m. m 203 508.2 103164.6

•

51 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff-2.5 to 25 Sqmm LT km 2.8 21930.3 61404.84

•

52 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications(( 0.6 mtr (L) x 0.9 mtr(W) x 1.8 mtr(H) = 0.972 x 20 Nos =19.44 Cum. + Road crossings.-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates cum 2.37 7012.66 16620.0042

•

53 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 507 99.75 50573.25

•

54 Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 Cum 253.5 2612.4 662243.4

•

55 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383:2016:, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. Sqm 253.5 6970.95 1767135.825

•

56 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. Sqm 54 556.5 30051

•

57 Providing and fixing of typical 'Citizen Information Board B" as per specifications and drawing. Two ACP Sheet of 4mm thick having minimum 0.25mm thick aluminum skin both sides and fixed over a back support of Ms plate of 5mm thick. Supported on frame post of 2 no's of MS Suare hallow section 75mmx75mmx6mm which is duly embedded in cement concrete M20 Grade of 600x600x750mm, 600mm below ground level.All MS will be stove enameled on both the sides.All sections of framed posts,MS sheet and Stell tubes will be painted with primer and two coats of epoxy paint as per drawing etc..Retro-Reflective Sheet as per IRC 67 fixted over a two no's of Aluminum composite material(ACP) sheeting of size 900x750mm of 4mm thick duly bolted/reveted with MS plate of 5mm thick on backside of ACP Sheet.Including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts,loading charges charges necessary for satisfactory completion of work as per directed by engineer incharge. (i) For warranty and durability the clause 1701.5 and for maintenance the clause 1911 shall be applicable. (ii) A reference number along with the month and year of installation should be placed on the back of a sign in a contrasting colour or by stamping in characters not exceeding 50 mm in height.485777/2019/Dir(Tech) 7 Retro Reflective Trafic Sign As per IRC 67 Clause 1701.3.8.1 Class A Type-1 No 3 22554 67662

•

58 Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing no 50 9460.5 473025

•

59 Supply of Lord Kumaraswamy statue of size 36"x 21" x 96" including 12" pedestral made up of Black granite stone including Transportation, Loading and Unloading charges No 1 1047000 1047000

•

60 Supply of 3 seater Bench of size 1.5m x 0.6m made up of Fiber Reinforced Plastics & Cast iron with powder coating including Transportation, Loading and Unloading charges No 20 27841 556820

•

61 Supply of S Bridge Ladder Scrambler of size 4.3m x 2.4m made up of Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 1 38913 38913

•

62 Supply of Triple wave slide of 5' of size 4.6m x 2.5m made up of Galvanized Pipe & (Linear Low Density Polyethylene powder coating including Transportation, Loading and Unloading charges No 1 146889 146889

•

63 Supply of 2 seater sea saw of size : 2.00m x 0.50m x 0.80m made up of (Linear Low Density Polyethylene & Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 3 30481 91443

•

64 Supply of 2 Toddler swings of size 3.3m x 1.0m made up of Fiber Reinforced Plastics & Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 2 52069 104138

•

65 Supply of mini sunset Scrambler of size 2.4m x 2.4m made up of Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 2 51282 102564

•

66 Supply of 7 activities ( straight slide,Spiral side and roller slide, ladder, Rock climber with hexagonal canopy of size 21ft X 21ft made up of Fiber Reinforced Plastics, Linear Low Density Polyethylene & Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 1 40552 40552

•

67 Supply of 7 activities ( straight slide,Spiral side and roller slide, ladder, Rock climber with hexagonal canopy of size 21ft X 21ft made up of Fiber Reinforced Plastics, Linear Low Density Polyethylene & Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 1 549142 549142

•

68 Supply of 4 activities ( straight tube slide,wave slide, Spiral side, staircase of 3ft of size 34ft X 23ft made up of Fiber Reinforced Plastics, Linear Low Density Polyethylene & Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 1 241934 241934

•

69 Supply of 17 activities ( Double curve slide, Spiral side, 8ft tunnel, 2- cone canopy, 5ft ladder , Rock climber and pod climber of size 31ft X 17ft made up of Fiber Reinforced Plastics, Linear Low Density Polyethylene & Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 1 628408 628408

•

70 Supply of 16 activities ( 5ft Double curve slide, 3ft double wave slide, Pod climber , net climber, 3ft ladder , 3ft and 5ft height decks, cross zeros leaf butterfly flower characters with frogt canopy of size 15ft X 18ft made up of Fiber Reinforced Plastics, Linear Low Density Polyethylene & Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 1 454421 454421

•

71 Supply of multi activities ( 7ft Double wave slide, 5ft straight tube slide, 5ft roller slide, 7ft roller slide, spiral and rock climber,kids bench , double arch swing canopy of size 39ft X 32ft made up of Fiber Reinforced Plastics, Linear Low Density Polyethylene & Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 1 1279933 1279933

•

72 Supply of 4 activities ( Mini wave slide, sea sa, Cross N zero drum, bucket swing and ladder of size 9.5ft X 5.3ft made up of Fiber Reinforced Plastics, Linear Low Density Polyethylene & Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 4 45947 183788

•

73 Supply of 4 seater animal MGR of size 7ft dia made up of Linear Low Density Polyethylene & Hot Dipped Galvanized Pipes with powder coating including Transportation, Loading and Unloading charges No 1 34150 34150

•

74 Supply of circular sit go round of size 5 ft dia x 3.7 ft made up ofmetal and HDPE sheet with powder coating including Transportation, Loading and Unloading charges No 1 97691 97691

•

75 Supply of 80L outdoor dustbin made up of stainless steel including Transportation, Loading and Unloading charges No 20 12969 259380

•

76 Supply , installation, Testing & commissioning of fountain ( Marble/granite)3 tier fountain of size 45 x 30 x 18 inch , thickness of 12 x 10 x 7 inch, 6ft diameter of water tank ,fountain height 7ft, 1HP submersible pump with starter and cable, including cost of all materials & labour charges etc., as per approved design and direction by engineer in charge No 1 885000 885000

•

77 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 44.61 279.3 12459.573

•

78 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications Sqm 69.27 123.9 8582.553

•

79 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Cum 8.63 6213.9 53625.957

•

80 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Column Cum 3.42 10034.33 34317.4086

•

81 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Roof slab Cum 7.77 11313.12 87902.9424

•

82 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings tonne 3.55 84204.75 298926.8625

•

83 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 33.33 6682.2 222717.726

•

84 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame. m 55.6 675.15 37538.34

•

85 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame. Sqm 18.76 3364.2 63112.392

•

86 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 8.1 7070.7 57272.67

•

87 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 Sqm 28.74 1198.05 34431.957

•

88 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 92.61 307.65 28491.4665

•

89 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 107.24 368.55 39523.302

•

90 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 24 336 8064

•

91 Providing and applying white cement based putty of average thick ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 116.61 380.1 44323.461

•

92 Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 116.61 113.4 13223.574

•

93 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 107.24 182.7 19592.748

•

94 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 10.52 144.9 1524.348

•

95 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 75.51 857.85 64776.2535

•

96 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding kg 162 176.4 28576.8

•

97 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 100mm wide m 48 46.2 2217.6

•

98 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thick m 14.5 69.3 1004.85

•

99 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete upto 50 mm conduit in brick wall m 6 30.45 182.7

•

100 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.-6 Way SP & N Each 1 5187 5187

•

101 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2 Way Each 2 144.9 289.8

•

102 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way Each 1 274.05 274.05

•

103 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Point 2 282.45 564.9

•

104 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 3 397.95 1193.85

•

105 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 1.0 mm2 m 15 19.95 299.25

•

106 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 1.5 mm2 m 307.5 27.3 8394.75

•

107 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mm2 m 315 44.1 13891.5

•

108 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 mm2 m 203 66.15 13428.45

•

109 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module Each 1 143.85 143.85

•

110 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 1 298.2 298.2

•

111 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 56 107.1 5997.6

•

112 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Each 2 179.55 359.1

•

113 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Stepped Fan Regulator Two Module Each 6 374.85 2249.1

•

114 Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220- 240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.-LED light fitting 1 x 4' - 20/22 W Each 33 724.5 23908.5

•

115 Supplying and fixing of round or oblong type bulk head fitting glass cover No 1 73.5 73.5

•

116 Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications Each 1 884.1 884.1

•

117 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders Each 4 128.1 512.4

•

118 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898-6-32 A SP Each 4 435.75 1743

•

119 copper cable - 4 x 6 SqmmVol.6 KPLS Sr/ Item No.13.7 Page No.40 Mtr 60 185.85 11151

•

120 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 48" Sweep (1200 mm) Regular model Each 1 3133.2 3133.2

•

121 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as perlSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 1 3685.5 3685.5

•

122 GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 3 mm GI strip m 5 86.1 430.5

•

123 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used.For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN6.0, 63mm dia m 50 198.45 9922.5

•

124 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines Each 4 96.6 386.4

•

125 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with: 50mm nominal bore pipes, From Sink & Urinal lines m 7.5 145.95 1094.625

•

126 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete PVC pipes 75mm dia., 6 kg/sqcm & class 3 m 20 231 4620

•

127 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. completPVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines m 40 431.55 17262

•

128 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Each 8 6275.85 50206.8

•

129 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Each 17 761.25 12941.25

•

130 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Each 4 3236.1 12944.4

•

131 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes m 30 324.45 9733.5

•

132 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes m 40 397.95 15918

•

133 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes m 42 227.85 9569.7

•

134 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes m 20 310.8 6216

•

135 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. L 1000 9.45 9450

•

136 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth cum 2.52 313.95 791.154

•

137 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..(INSPECTION CHAMBER) Each 8 5726.7 45813.6

•

138 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete Each 20 256.2 5124

•

139 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Each 8 285.6 2284.8

•

140 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. Each 2 2060.1 4120.2

•

141 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates cum 0.17 6538.35 1111.5195

•

142 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-walls cum 1.74 7192.19 12514.4106

•

143 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-slabs cum 0.98 9807.53 9611.3794

•

144 Providing and constructing graded filter media below and behind rock toe consisting of 200 mm thick sand, 250 mm thick 20 to 4.75 mm and 400 mm thick 80 to 20 mm clean, hard, graded coarse aggregates from approved source satisfying specified filter criteria including cost of all materials, machinery, labour, laying to required thickness and slope, compacting and all other ancillary operations complete as per specifications and approved drawings. cum 0.36 1942.5 699.3

•

145 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent sqm 11.76 2994.6 35216.496

•

146 Short point up to 3Mtr from tapping point to out let via switch box point 60 299.25 17955

•

147 Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box point 30 598.5 17955

•

148 Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box point 10 743.4 7434

•

149 Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade ,multistrand copperwire with low conductor resistance single core in open or concealed system of wiring withs pecified IS-694:2010-6mm2 m 195 96.6 18837

•

150 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 3Way Each 15 166.95 2504.25

•

151 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 10-12Way Each 5 334.95 1674.75

•

152 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.3 Module Each 15 169.05 2535.75

•

153 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.4Module Each 10 183.75 1837.5

•

154 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.10-12 Module Each 5 361.2 1806

•

155 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch Each 10 342.3 3423

•

156 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Each 10 189 1890

•

157 Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive paste etc ,and fixing using inverted wood plug sin case of RCCceiling and RCCwall/ stone structure or rawl plugs in case of brick wall sand cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.25 mm dia 2 mm thick m 500 85.05 42525

•

158 Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box Each 30 58.8 1764

•

159 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3• phase I single door with powder coated painting. Made out of 14 SWG MS enclosure Double Door 16Way SP & N Each 5 3053.4 15267

•

160 Supplying, fixing and wiring Residua current circuit breaker (RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole Each 3 4490.85 13472.55

•

161 Supplying exhaust fan of 1440RPM of 300mm(12") size with bracket blades complete for light duty suitable to operate on 230V50Hz, AC Supply. Each 10 1566.6 15666

•

162 Supplying capacitor type ceiling fan complete with downrodblades ,shackle,canopiesetc ,for operation on 230V,50cycles.Singlephase AC supply conformingto ISS-374-1979 and with double ball bearing system. 56" Sweep (1400 mm) Regular model Each 6 3182.55 19095.3

•

163 Supplying and fixing HRC fuse units base on existing switch /panel board. 6 to 16 A Each 15 345.45 5181.75

•

164 Supplying of onload change over switches 4poles, AC-23ADuty, 415V, 50Hz, AC Supply. (Open Execution) Each 3 7444.5 22333.5

•

165 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947 32 A Each 2 4294.5 8589

•

166 Supplying & fixing miniature circuit breakers on existing MCB distribution board susing necessary fixing material san 'C' Type curve, indicato rON/OFF, energycross -3with Short circuit breaking capacityof 10Kand complete wiringasrequired confirming to IEC60898.50-63 A SP Each 10 851.55 8515.5

•

167 Supplying, fixing and wiring earthleakage relay with orebalanced current transformers uitable forsinglephase 50HzAC with latest microcontrolle based, digital readoutof percentage leakage current, programmable delay/auto/manual reset facility suitable to mounton DIN rail/ flush mounting on panel board. Each 2 9717.75 19435.5

•

168 Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two "O" rings and a coupler of suitable size, including loading and unloading at both destination and cutting of pipes where ever necessary including jointing with all labour, all lead and lift including encasing the pipe around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done the contractor shall have to make his own arrangement for procuring water for testing etc. complete. SN8 Double Wall Corrugated HDPE pipe sizes of 100 mm dia m 1000 297.15 297150

•

169 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) km 2 148934.1 297868.2

•

170 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-Drain bed Cum 12 6532.05 78384.6

•

171 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-Cement Concrete Drain Walls Cum 12 8818.27 105819.24

•

172 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-Cement Concrete Drain slab Cum 12 7185.26 86223.12

•

173 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. f Canal & Allied Works tonne 1.08 84819 91604.52

•

174 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveyingto work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey RCC NP3 Class pipe of 450 mm dia. m 450 2470.65 1111792.5

•

175 Providing and constructing 300 mm thick rubble stone pitching set in CM 1: 5 proportion by volume with pin headers at 2 per m2 including cost of all materials from approved source, labour, packing stone chips and mortar into joints, finishing, curing and all other ancillary operations complete..with 150 mm thick murum bed is to be provided below pitching Sqm 750 1098.3 823725

•

I agree to carry out the above cited work at _______ % in words__________________________________ above/below the estimated Rate indicated in the Schedule-B.

•

Contracotr No of Correction Executive Engineer

•

No of over writings KNNL, No-1 T. R. Division

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Schedule B NHP Park.xlsx

Others - SCHEDULE B • 0.04 MB

Bid Document NHP Park-.docx

Tender Document • 10.74 MB

Tender Notification 4701 - NHP Park.docx

Others - TENDER NOTIFICATION • 0.06 MB

Ready to Participate?

Download all tender documents and submit your bid