Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC FLAT NO 1 GURUKRUPA APARTMENT BEHIND TELEPHONE EXCHANGE DEHUROAD PUNE | PUNE | PUNE | MAHARASHTRA | 412101 | L1 | Accepted-AOC Accepted as L1 | |
| 2 | L2₹32.2 L+₹2.9 L (9.74%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹37.9 L+₹8.5 L (29.1%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹38.0 L+₹8.6 L (29.3%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹38.4 L+₹9.0 L (30.6%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
7 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehu Road, Pune
GE Dehu Road, Pune
SPECIAL REPAIR TO BLDG NO P-137 AND P-164 AT ASHOK NAGAR AND PROVN OF COVERED SHELTER 15M X 6M IN ADM AREA FOR UNIT QRT AT 29 FAD UNDER AGE B/R (EAST) AT GE DEHU ROAD
2022_MES_562112_1
8692
Open Tender
Civil Works
Item Rate
180 days
GE Dehu Road, Pune
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Dehu Road, Pune
₹88,000
Yes
31 Dec 2022
9 Nov 2022
12 Dec 2022
9 Nov 2022
7 Dec 2022
23 Nov 2022
Amount
Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as directed.
Dismantling timber in fillets,rafters,purlins etc. under 40 sqcm in section unframed work complete all as directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.
Dismanteling MS works of any desc. not otherwise provided for complete all as specified.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.. conf to Fe-410-w(gdeE-250 quality-A) complete all as specified and as directed.
M &L for MS work as in wind tie or any other work including cutting, drilling holes etc.
S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.
All as per item No. 07 above but fix in plain valley gutter / ridge
Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.
M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified
Dismantling wall/ ceiling boards(fiber pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets complete all as specified and as directed.
S & F Anodised Alu. snap grid (605x605)mm frame wk for false ceiling , providing 9mm thick Acoustical board/tiles for insulation and accoustic purposes, (60x60) cm in size, fixed in celing to frame work on snap grid, hangers 6 mm dia G.I. wire ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat (40 X 3) mm size 60 mm long complete all as specied and as directed.
M & L for 100 mm thick PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in finish surface of water tank staging complete all as specified and directed.
Taking out complete existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land complete all as specified and as directed.
M&L for rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of incl admixature of as per manufacture recommendation(WPC to be measured seperately) finished even and smooth.
M&L for water proofing treatment using polymerised membrane to roof slab. Water proofing treatment shall be as under :- (a) 10mm thick plaster in cm (1:4) on conceret surface on slab with admixture as per manufacture recommendations. (b) Applying cold bitumenous oil based primer IS No 3383 @ 250 Gms/Sqm. (c) Laying 3mm thick APP Modified membrane with non woven polymer reinforcement / mat core (Centre core) not less than 3 mm thick and not less than 3.60kg/sqm the overlap shall be 100 mm on length side and 100 mm on width side and all as per manufacturer instruction complete.The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer.Top surface shall be applied with 0.15 Kg/Sqm bitumenous aluminium 2 coats of paint complete all as specified and as directed by Engineer-in-Charge.
Dismantling of PVC water tank of capacity upto 1000 litre complete all as specified and directed.
S & F rotational moulded polyethylene water storage tank of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.
Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.
M & L for Glazed coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.
All as per item No 20 above but on skirtings with and including 10 mm thick rendering as backing coat in CM (1:4) complete all as specified and as directed.
M & L for Glazed coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.36 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.
Ditto above item No 22 but on skirting over 10 mm th rendering in CM 1:4 complete.
M&L for Matt finish Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and as directed.
M&L for glazed coloured ceramic tiles 300mm x 450mm x 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with incl backing coat 10mm thick in CM 1:4 complete all as specified and as directed.
Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.
Ditto as above but n'exc 1.5 Sqm each.
Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.
Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing
S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.
S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.
S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 165 X 60mm.
S & F for 35mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.
S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.
S&F mild steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.
S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.
S&F 100 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.
S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.
S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and as directed.
S & F for 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rod fixed to brackets with fancy end knobs complete all as specified and directed
S&F in repair stainless steel fancy type ends for 25 mm dia curtain rod. complete all as directed.
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified.
M & L 75 mm thick Cement concrete 1:3:6 type C-2, (40 mm grade stone aggregate) as in plinth protection finished even and fair complete all as specified and as directed.
M & L 75 mm thick PCC 1:4:8 type D2 (40 mm Grade Aggregate ) as in sub base complete all as specified and as directed.
M& L Glozy finish Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over & including screed bed 15 mm thk in cm 1:6 .complete all as specified.
S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified.
Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm.
All as per item No. 49 above but bore of pipe 20mm
M&L 15mm dia GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.
Refixing old steel tubing 15mm dia and connections in new or old position (walls, ceiling, floors etc) complete all as specified and as directed. Note :- GI tubing obtain u/s item No 49 shall be used.
M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 20 mm
Refixing old steel tubing 20mm dia and connections in new or old position (walls, ceiling, floors etc) complete all as specified and as directed. Note :- GI tubing obtain u/s item No 50 shall be used.
S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe complete all as specified and as directed.
S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed.
S & F in repairs Brass cromium plated with capstan heads shower rose of 125 mm dia complete all as specified.
S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.) complete all as specified and as directed.
S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified. (Note : Stainless steel sink to be provided in lieu of ground cemented washing area, hence no credit)
S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.
S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).
S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs complete all as specified and as directed.
Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls complete all as specified and as directed.
M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls complete all as specified and as directed.
M&l Complete removal of old existing treatment of painted surfaces and priming with alkalie resistant priming paint & applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.
M & L complete removal of old existing treatment of painted surfaces applying two coats of cement paint over a coat of alkali resistant priming paint complete all as specified and directed.
M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparation of old wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for prepration of new steel surface and applying two coat of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed.
S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete all as specified and as directed
S&F Anodised aluminium window shutters,(three track) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.
S&F Anodised aluminium Powder coated louvered ventilator with provision of exhaust fan using jindal aluminiam section weighing 0.55kgm as specified including glass 3 mm thick ordinary quality frosted and stainless steel wire mess 0.36 mm dia wire and 1.40 mm aperture etc including taking out old frame shutter complete all as specified and as directed.
Surface Dressing n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard and dense soil complete all as specified and as directed by engr-in-charge.
Excavation in trenches n exc. 1.5m wide and not exc 1.5m in depth and getting out in soft / loose soil for foundation etc. complete all as specified and as directed by engr-in-charge.
Excavation in trenches n exc. 1.5m wide and not exc 1.5m in depth and getting out in hard / dense soil for foundation etc. complete all as specified and as directed by engr-in-charge.
M & L Damp proof course 40mm thick (in cement concrete 1:2:4 Type B-0) to horizantal or vertical surface including necessary formwork and complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 all as specified and directed.
Material & labour for preparation of new surfaces and & applying three coat of white wash complete all as specified and directed by Engr-in-charge.
M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M&L for hardcore of guge n exc .63 mm, deposited, spread and levelled in layers n exc. 15 cm thick waterd and rammed t a true surface complete all as specified and as directed by engr-in-charge.
M&L for 100 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone agg) in sub base of floor.complete all as specified and as directed by engr-in-charge.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.
All as per item No 23 above but in skirtings with and including 10 mm th rendering as backing coat in CM (1:4) complete all as specified and as directed.
Returning filling in including speading,leveling ,watering and well ramming in layer complete all as specified and directed by Engr-in-charge.
M&L for removal of excavated Soil to a distance n exc 50m and depositing where directed by Engineer-in-Charge.
M&L PCC (1:3:6) type C-1 (using 20mm graded stone agg) filling of pressed steel door frame complete all as specified and as directed by engr-in-charge.
S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-charge.
Supply & fixing MS pressed handle oval type stove enamelled black of 125mm long fixed with screw to shutter complete all as specified and directed by Engr-in-charge.
S & F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F 4 mm Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and as directed.
S & F for Roof plates with sleeve pieces riveted or welded thereto, and similar roof and ceiling connections complete all as specified and directed by Engr-in-charge.
M & L for 12 mm thick Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and directed by Engr-in-charge.
M&L for PCC (1:3:6) type (using 20 mm graded trap stone aggrgate) in coping.
M & L for providing reinforced cement concrete 1:2:4 Nominal Mix (using 20 mm graded stone aggregate) as beams , cantilevers, bressummers , lintel over 1.5 mtr span complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item).
M&L formwork to side and soffits of floor or roof beam beam hauching, girder bressummers ,lintels cantilivers shelves including supports overhangs etc. also splays between floor and beams stc. complete all as specified and as directed.
M&L for TMT bar 10mm dia and over cut to length bend to shape required and binding with mild steel wire annealed not less than 0.9mm dia. complete all as specified and as directed by engr-in-charge.
M&L for TMT bar 6mm to 8mm dia as in stirrups cut to length bend to shape required and binding with mild steel wire annealed not less than 0.9mm dia. complete all as specified and as directed by engr-in-charge.
E/M PART
M&L for point wiring with 1.5 sqmm multistranded copper conductor cable of PVC insulated and unsheahed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator setc for Note:- Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws:-
One light point controlled by one switch
One fan point controlled by one switch & regulators
One bell point controlled by one switch
One socket 5 pin 5 Amps flush type on independent board
One socket 5 pin 5 Amps flush type on same board
M&L for point wiring with 2.5 sqmm single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing
S & F in repair submain wiring with cable insulated single core multistranded copper conductor cable 1100 volts 2x 4 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 4.0 sqmm copper conductor cable for earth continuity. (Note : 2 runs of 4.0 sqmm cable, one run of 4.0 sqmm cable and one run of PVC casing capping will be measured as one RM).
S&F switch piano flush type single pole one way 5 Amps
S&F bell push, flush type single pole 5 Amps
S&F bell electric, AC 230 volts, single pole
S&F switch socket combination 2 in 1, 5 Amps flush type
S&F switch socket combination 2 in 1, 15 Amps flush type
S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block
S&F regulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep
supply and fix in repair MCB DB TPN sheet enclosure double door Vertical type suitable for mounting MCB with 415 volts with 200 Amps rated busbar 04 way
MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way
supply and fix in repair isolator TPN 40 Amps 415 volts
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP , 5- 32 amp to fit in the MCB DB complete with connection testing and commissioning.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN ,32 amp to fit in the MCB DB complete with connection testing and commissioning.
Supply and fix in repair LED Fitting 18 Watts LED MODEL:LHEXBQP71NWO18 MAKE :Havells or Equivalent
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make : ENDURAPEARLS35WLED757SASYTOPC of Havells or equivalent inPhilips/ Bajaj/ CG/Luker
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.
Supply and fix in repair LED Fitting 9 Watts LED including provision of connections cable pvc unsheathed stranded copper conductor and pvc square block of size 80mmX80mm MODEL:LHEXBLP7IN1W009 MAKE :Havells or Equivalent in Philips/Bajaj/HPL
M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burried burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata,PCC Chamber with cover,Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DB in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge.
S/F in repair Meter box 2mm thick MS sheet powdr coated of size1mtr x 1mtr X 0.25mtr split in two parts 0.4X 1 mtr on top for refixing the meters and .6X 1 mtr for fixing of MCCB and DB.The top portion should be provided with glass of size 10cm x 10cm infront of each meters to facilited recording of meter reading and including provision of wooden block of suitable size to fix the meters and DBs, door with locking arrangement and box to be fabricated such as the MCBs can be operated form out side including Removing and refixing of meters(4 Nos) and supply and fix the following:- Switch Fuse unit TPN-32 Amps 415 V-01 Nos MCB SPN 240 Volts 40 Amps including connections complete from electric meter - 04 Nos Note:rate quoted also includes fixing of the DB completely on walls with necessary cable for internal wiring in the DB,lugs insulators Etc and making good the disturdbed surface to match with the existing.
Material and labour for replacement of unserviceable street light bracket made out of GI pipe 1.2 mtr long 40/25mm dia medium grade bent to shape as directed including MS clamps made out of 40mmX6mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size all as directed incl taking down of old unserviceable bracket complete all as specified and as directed..
Supply,laying,jointing , testing and commisioning XLPE cable 1100 volts grade PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall encased in GI pipe etc complete of following sizes including taking down old unserviceable over head conductors and insulators channels carefully as directeed by engineer in charge
25 Sqmm x 3.5 Core
16 Sqmm x 2 core
M & L for HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the 40 mm dia outer dia. Make:-Infra/Supreme/Prince
M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.
M & L of new Gl steel tube Light grade galvanized of size 80 mm dia with all fitting laid in trenches complete and all as specified and directed by Engr in charge. Make : Jindal/ Tata/ Prakash Surya/ Ravindra./Swastik
Supply and Lay pipe galvanised Medium class including fitting complete 40 mm dia complete all as specified and directed.
Supply and Lay pipe galvanised Medium class including fitting complete 25 mm dia complete all as specified and directed.
Supply and Lay pipe galvanised Medium class including fitting complete 20 mm dia complete all as specified and directed.
Supply and fix gate valve stop screwed 20 mm dia complete all as specified and directed.
M&L for MS Work using angle iron 50mm x 50mm x 5mm thick including, cutting, welding, other process for shaping to get into required shape as per site requirment and fixing on site complete all as specified and directed. Note : Earthwork will be measured and paid separately
AVS CONSTRUCTION
SLB Enterprises
PREETI ENTERPRISES
A S Shingote
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .