Painting and flooring works of DGM,S office rooms and replacing damaged entrance gate in Technical office building at FACT CD, Ambalamedu.

Painting and flooring works of DGM’S office rooms and replacing damaged entrance gate in Technical office building at FACT CD, Ambalamedu.

Labour charges for dismantling carefully the existing ceiling/partition with AC sheets, Plywood/Hardboard/Wood etc and stacking them for reuse as per departmental instructions.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting one coat of priming coat on plastered surface (interior/exterior) with approved quality cement primer after cleaning the surface including all cost of materials, labour etc.

Painting two coats with ready mixed plastic emulsion paint of approved quality and colour specified over the priming coat already done and paid separately after cleaning the surface well.

Painting with synthetic enamel paint using approved quality paint as specified one coat (over a priming coat already done and paid separately) for wood work/iron work after cleaning the surface including cost of all materials and labour.

Painting with synthetic enamel paint for each succeeding coat for woodwork/ ironwork including cost of all materials and labour.

Providing and laying glazed vitrified floor tiles(GVT) with approved brand and size 1200x600mm or nearest available size (thickness to be specified by manufacturerer with water absorption lessthan 0.08% and cofirming to IS 15622 and fixing floor tiles with cement based high polymer modified quick set tile adhessive(Water based)confirming to IS 15477 in average 3mm thickness and grouting the joints of flooring tiles having joint of 3mm width using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10kg of hardner and 0.20kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer in charge.

Providing and laying with approved brand rectified Glazed Ceramic floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in suitable colours laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing first quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-Charge for dadoing to walls over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment

Supplying to Civil store Class"B" of "ZENITH BIRLA / TATA" or equivalent brand GI Pipes having ISI - 20 mm dia

Supplying to Civil store Class"B" of "ZENITH BIRLA / TATA" or equivalent brand GI Pipes having ISI - 40 mm dia

Supplying to Civil store M S balls 20mm dia

Fabrication and erection of MS single section members such as monorails, channels, MS Flat ,ground rail, MS angle handrails, verticals, GI Pipes , GI specials etc. with structures such as end stops, clamps, bolts and nuts etc. including charges for cutting, welding ,splicing, drilling holes as required, fixing to lines and levels and cleaing and painting with two coats of zinc chromate primer (One shop coat and one coat after fixing) and two coats of chemical resistant enamel paint of approved quality and colour over the primer etc. complete(Structural steel/Pipes are required for the work except for bolts and nuts, gas & electrodes will be supplied by the company free of cost at our Stores)

Dismantling the existing structural carefully without damaging the remaining portions including conveying and stacking at places pointed out initally & then removal of debris etc. (Measurements will be based on actual weight taken at FACT's weigh bridge)

Applying touch wood or equivalent two coats to wood work after sand papering and cleaning the surface well and applying wood filler at all heights

K M BIJU (BID ID -3185073)

GEORGE A K (BID ID -3185642)

BRIJEESH K.N (BID ID -3184681)