Retender for Infrastructure Construction of 150-Bedded Girls Hostel under Gender Inclusion and Equity Initiative (GIEI) of PM USHA, Dhamnagar College, Dhamnagar, Bhadrak, Odisha.

SL.No. Description of Item Amount

2 ELECTRICAL WORK =

a. Electrical work 73,35,857.04

b. Fire fighting work 7,80,174.70

GRAND TOTAL = 8,03,03,002.20

GRAND TOTAL = 8,03,03,002.20

Digitally signed by JAYA

ABSTRACT ESTIMATE FOR PROPOSED VARIOUS DEVELOPMENT WORK OF DHAMNAGAR COLLEGE, DHAMNAGAR, BHADRAK, ODISHA. (150

BEDDED GIRLS HOSTEL)

Sl. Non-Schedule

Item of Work Unit Quantity Rate Schedule Amount Non-Schedule Amount

1 Site Clearance

Cleaning & grubbing road land including uprooting rankvegetation, grass

,bushes, shurbes, sapling and trees girth upto 300mm, removal of stumps of trees

cut earier and disposal of unsevicable materials and stacking of servicable

materials to be used or auctioned up to lead of 1000 meters including removal sqm 2270.41 9.95 22584.68 0.00

and disposal of top organic soil not exceeding 150mm thickness.

2 Earthwork Excavation

Earth work in excavation of foundation in HARD soil within 50m lead and 1.5m

lift including rough dressing and breaking clods to maximum 5cm. To 7cm. And

a) laying in layers not exceeding 0.3m in depth and as per specification complete.

3 Sand Filling

Filling in foundation, trenches and plinth with river sand, well watered and

compacted in layers of 1.8 mtr, with top surface dressed and leveled to proper

gradient including cost of all materials, conveyance, all taxes and royalties, Cum 568.76 1103.42 627574.78 0.00

loading and unloading, including cost of all labour, sundries, T & P etc. All

complete as per directions of the Engineer -in-charge.

4 Back Filling

Filling available excavated earth (excluding rock) in trenches plinth sides of

foundation etc. in layers not exceeding 20 cm in depth , consolidating each

deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt cum 415.24 181.52 75374.12 0.00

etc. including cost of all labour, sundries T & P etc complete in all respect as per

the direction of Engineer-In-Charge.

Boring with hydraulic piling rigs with power units, providing and installing cast

in situ single under reamed piles of specified diameter and length below pile cap

in M-25 cement concrete, to carry a safe working load not less than specified,

excluding the cost of steel reinforcement but including the cost of boring with

bentonite solution and the length of the pile to be embedded in pile cap etc. all Rmt 2934.00 3065.60 8994470.40 0.00

complete. (Length of pile for payment shall be measured upto to the bottom of

pile cap) : (DSR 2023 Vol-II, Page No: 294, Item No-20.3)

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size

clean hard black crusher broken granite stone metal of approved quality and

from approved quarry including hoisting, lowering and laying concrete in layers

not exceeding 15 cm. (6") thick to the required level ramming, watering, curing

etc. complete including cost, conveyance, royalties of all materials with all Cum 330.41 8684.13 2869316.02 0.00

labour and T&P required for the work etc. complete in all respect and as per the

direction of the Engineer-in-charge.

7 Anti-termite Treatment

Providing & applying of pre constructional anti-termite treatment Confirming to

IS 6313 (Part-II) and creating chemical barrier under and around the column pits,

wall trenches, basement excavation top surface of plinth filling, junction of wall

and floors along with external perimeters of building, expansion joints,

surrounding the pipes and conducts etc. at the rate at 7 ,5 liter per sqm on

vertical surface and 5.0 liter per sqm on horizontal surface. Chemicals:- sqm 1227.13 123.36 151375.32 0.00

Imidachloprid 30.5 SC , Doses: - 2.1 ml per lit of water cost of all materials,

labour,conveyance, T&P , all taxes and hire charges of machinaries as per

direction of Engineer-incharge. (Make :- HI-Solution or Smart Care Pest Control

or Bharat Pest Eradicators)

8 Fly Ash brick(1:6)

Fly Ash brick masonry in cement mortar (1:6) in Substructure using Fly Ash

bricks of 25 Cm. x 12 Cm. x 8 Cm. size having a crushing strength of not less

than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting

circular moulding chamfering and corbelling and similar such type of works with

all necessary projections watering and curing after immersing the bricks in water

at least for six hours before use including cost, conveyance, royalties and taxes

of all materials with all labour,labour cess and T & P required for the work

complete in all respect as per direction of Engineer-in-Charge.

Digitally signed by JAYA

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade

as per approved designs and drawings having a minimum compressive strength

(in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and

test conducted in accordance with I.S. 516 using 12mm. to 20 mm. size black

hard crushed broken granite stone chips and screened and washed sharp sand for

mortar of approved quality from approved quarry, washed and cleaned ( 20mm.

size chips not to exceeds 25 %) to be mixed in concrete mixture with Portland

slag cement (PSC) including hoisting, lowering, laying and compaction concrete

by using vibrators, watering and curing for 28 days, centering and shuttering then

after dismantling and removing debris from the work site and finishing the

exposed surface smooth providing grooves or beads wherever necessary

including cost, conveyance, loading, unloading, royalties and taxes of all

materials and cost of all labours, sundries, T & P required of the work

etc.complete in all respect as directed by the Engineer-in-Charge. But excluding

cost and conveyance of M.S. rods or Tor steel and binding wires and labour

charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the

grills and placing in proper position.

Foundation and plinth

Column (Below Plinth)

10 Reinforcement

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of

primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL /

SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and

jointing if necessary and tying the grills and placing in position as required for

R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying

including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of

18 to 20 gauge and labour required for the work for bending, binding and tying

the grills in all floors with labour cess etc. (payment will be made on standard

weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per

specification & direction of Engineer-in-charge.

Foundation and plinth qtl 668.50 10134.62 6774992.67 0.00

11 FLY ASH BRICK(1:6)

Digitally signed by JAYA

Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash

bricks of 25 Cm. x 12 Cm. x 8 Cm size having a crushing strength of not less

than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting

circular moulding chamfering and corbelling and similar such type of works with

all necessary projections watering and curing after immersing the bricks in water

at least for six hours before use including cost, conveyance, royalties and taxes

of all materials with all labour,labour cess and T & P required for the work

complete in all respect as per direction of Engineer-in-Charge.

12 FLY ASH BRICK(1:4)

Providing Fly ash bricks masonry work using 25 Cm. x 12 Cm. x 8 Cm having

crushing strength not less than 75Kg/Sqcm in cement mortar (1:4). Immersing

the bricks in water before use in all necessary projection splays cutting, circular

moulding, corbelling etc. Including cost of conveyance ,taxes & royalties,

loading and unloading of all materials & cost of all labour, scaffolding ,watering

& curing ,sundries, T & P etc. complete as per the direction of Engineer-in-

13 16 mm Plastering

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with

screened and washed sharp sand for mortar and finished smooth to the rough

surface of walls in all heights after racking out joints including watering and

curing, rounding of corners, providing grooves where ever necessary with cost,

conveyance, royalties of all materials with cost of all labour,labour cess, T&P,

and scaffolding required for the work etc. complete in all respect as directed by

the Engineer in charge.

14 12 mm Plastering

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with

screened and washed sharp sand for mortar and finished smooth to the rough

surface of walls in all heights after racking out joints including watering and

curing, rounding of corners, providing grooves where ever necessary with cost,

conveyance, royalties of all materials with cost of all labour,labour cess, T&P,

and scaffolding required for the work etc. complete in all respect as directed by

the Engineer in charge.

Terrace Floor sqm 69.06 246.30 17009.57 0.00

15 6 mm Plastering

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with

screened and washed sharp sand for mortar and finished smooth to R.C.C. work

after closed deep chipping & slurry treatment including watering and curing,

rounding of corners, providing grooves where ever necessary with cost,

conveyance, royalties of all materials with cost of all labour, T&P, and

scaffolding required for the work etc. complete in all respect as directed by the

Engineer in charge.

Terrace Floor sqm 40.83 274.35 11201.71 0.00

16 Water Proofing

Providing and installing two component acrylic modified cementitious

waterproofing coating with Nerolac Perma Guard 2K/ Equivalent with Nerolac

Perma Fibre Mesh 45 GSM over roof slab after carring out pond test on roof

slab filling all defects. Saturating the surface mixing the products and then

application in 1.0 mm thickness (1.8kg/sqm coverage rate for 1.0mm thickness)

in suitable layers complete in all respect all material, tools, plant & labour

complete in all respect. Density 1850kg/m3, mix ratio (Powder to liquid ) 2:1 by

First Floor sqm 81.94 548.228 44921.80

Second Floor sqm 316.65 548.228 173596.40

17 Grading Plaster

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete

(1:2:2) using 6mm size black hard granite crusher broken chips and screened &

washed sharp sand for mortar and finished smooth to the rough surface of slab

including watering and curing with cost, conveyance, royalties of all materials

with cost of all labour, labour cess and T&P required for the work etc. complete

in all respect as directed by the Engineer in charge.

Digitally signed by JAYA

18 Industrial vitrified tile

Supplying, fitting & fixing of 8-10 mm thick & size of 300x300 mm Industrial

vertified floor tiles in floors of approved make laid on 20 mm thick cement

mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including

cost of all materials, labour T&P etc required for the work all complete as per

direction of the Engineer-in-charge .

19 Vitrified Floor Tiles

Providing vitrified tiles having thickness of min 10mm conforming to IS 13755

of 600x1200 (shade to be decided as per Ama Hospital scheme) (homogeneous)

of premium quality in floors, treads on steps and landings on 20mm thick bed of

cement mortar of mix (1:4) laid in proper slope and gradient with screened and

washed sharp sand for mortar and fixing with neat white cement slurry,grouting

the joints with neat white cement slurry mixed with required quantities of

pigments of approved make to match the shades of the vitrified tile if required ,

watering and curing for 21 days, including cost, conveyance, loading, unloading,

royalties and taxes of all materials, cost of all labour,Labour cess, sundries, T&P

required for the work, complete in all respect as per specification and direction

of Engineer-in-charge.

20 Vitrified Floor Skirting

Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm

to 10mm confirming to IS 13756 of size 600mm x 600mm Plain (Ivory) as

directed by Engineer-in-charge in dados skirting and risers of steps on 12mm

thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to

match the shades of the tiles including rubbing and polishing etc. complete with

cost, conveyance, royalties of all materials all labour, labour cess complete in all

21 Ceramic Toilet tiles

Supplying fitting, fixing ,ceramic glazed tiles 30cm x30 cm / 40cm x40 cm in

floors of size of approved make with 20mm thick bed of cement mortar (1:4)

jointed with neat cement slury mixed with pigment to match the shades of the

tiles complete including cost of all materials,Labour T&P etc required for the

22 Ceramic Skirting

Supplying & Fixing ceramic tiles in Dados, Skirting and risers of steps on 12 mm

thick cement plaster (1:3) Jointed with neat cement slury mixed with pigments to

match the shade of the tiles including rubbing and polishing including cost of all

meterials etc. complete.

23 Granite tile

Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in

floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4)

jointed with neat cement slurry mixed with pigment to match the shades of the

tiles including rubbing and polishing etc. complete with cost, conveyance,

royalties of all materials complete in all respects as per direction of Engineer-in-

24 Granite Skirting

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.10 Sqm & up

to 0.4 sqm (10mm. thick) of approved make in dadoes laid on 12 mm thick

cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry

including cost of all materials, labour T&P etc. required for the work all

complete incl. rubbing as per direction of the Engineer-in-charge

Supplying , fitting and fixing of openable UPVC doors with door frame of

approved make with 6mm thick glass of approved quality complete with frame,

shutters and all fitting and fixtures. SOR 2022 P-235 Sl No-13

Terrace Floor sqm 4.41 10244.90 45180.02 0.00

Digitally signed by JAYA

26 WPC Door Frame

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/ clerestory windows & desertory other

Frames/Chowkhat of Frame size 45 x 70 mm comprising of virgin PVC polymer

of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers

(wood powder/ rice husk/ wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC

solvent cement and screwed with full body threaded star headed SS screws

having minimum frame density of 750 kg/ cum, screw withdrawal strength of

2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,

modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A

category with property of being termite/borer proof, water/moisture proof and

fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of

required dia andlength complete as per direction of Engineer-In- Charge. (M.S

hold fast/lugs or SS dash fasteners shall be paid for separately). (DSR 2023, Page

No: 341, Item No-26.86.1)

27 WPC Door Shutter

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid decorative type flush door shutter of 30 mm thick of required

size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium

carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic

additives (maximum toxicity index of 12 for 100 gms) having minimum density

of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),

minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2

and resistance to spread of flame of Class A category with property of being

termite/borer proof, water/moisture proof and fire retardant. WPC to be

laminated with PVC foil of minimum 14 microns thick of approved design

pasted with hot melt adhesive on both faces of shutter and fixing with stainless

hinges of required size with necessary full body threaded star headed counter

sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainlesssteel

butt hinges and necessary S.S screws shall be paid separately) (DSR 2023, Page

No: 342, Item No-26.88.1)

28 UPVC WINDOWS

Supplying , fitting and fixing of two track UPVC sliding window of approved

make with 6mm thick glass of approved quality complete with frame, shutters

and all fitting and fixtures. SOR 2022 P-235 Sl No-12

Terrace Floor sqm 2.43 5853.94 14225.09 0.00

Fixed window / ventilator without mullion / transom. :Using R1 series with

frame (33mm & above ) x (35mm & above). (Height upto 0.90 metre) (DSR Vol-

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates,

garage door, collapsible gates with top and bottom rails, steel windows, critical

frames for windows, stair case and parapet railing made out of M.S Square bar/

flat including stair case hand railing with 40mm. dia G.I.pipe etc. including

painting two coats over a coat of redoxide primer as per approved drawing and

design with cost of all materials & labour, labour cess, T&P, sundries etc.

complete in all respect as per specification & direction of the Engineer-in-

31 S.S. RAILING

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using

50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x

2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x32mm x

2mm in 3 rows in stair case as per approved design and specification, buffing,

polishing etc with cost, conveyance, taxes of all materials, cost of all

labour,labour cess, T&P etc. required for the work complete in all respect as per

direction of the Engineer-in-charge

32 Synthetic Enamel Paint (Iron Work)

Digitally signed by JAYA

Painting two coat with approved synthetic enamel paint to new iron work over a

coat of Red oxide primer including cost, conveyances, royalties, taxes of all

materials and cost of all labour with T&P required for the work etc. complete as

per specification & direction of Engineer in charge.

Terrace Floor sqm 2.43 337.13 819.22 0.00

33 Antifungal Weather Coat Paint

Wall painting two coats with Antifungal weather coat paint (1st quality) exterior

grade of approved make & approved shade over a coat of primer to make an

even finished surface in all floors and heights with all scaffolding and staging

charges including cost, conveyance, cost of all labours, T & P, sundries etc. as

required for the work complete in all respect as per the direction of the Engineer-

Terrace Floor sqm 316.86 124.61 39483.29 0.00

34 Plastic Emulsion Paint

Painting two coats with plastic emulsion paint with a approved quality primer to

make an even finished surface in all floors and heights to wall surface of

approved make and shade including sand papering, applying putty wherever

necessary & cost of scaffolding, staging charges with cost, conveyance, cost of

all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-

Terrace Floor sqm 109.89 138.53 15223.28 0.00

35 Cement Primer

Priming one coat with wall cement primer (water bound) to make an even

finished surface in all floors and heights to wall surface of approved make and

shade including sand papering, applying putty wherever necessary & cost of

scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess

T&P etc. complete as per the direction of the Engineer-in-charge.

Terrace Floor sqm 426.75 104.78 44716.57 0.00

Finishing plastered surfaces of walls with cement based wall putty (Water based)

of approved make (JK White/ Birla white or equivalent make duly approved by

Engineer-in-Charge) and finishing the surface smooth and even by sand papering

to receive painting in walls, at all heights with staging wherever necessary with

cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the

work complete in all respect as per the direction of the Engineer-in-charge.

Terrace Floor sqm 426.75 100.54 42903.74 0.00

Digitally signed by JAYA

Name of the work :- PROPOSED VARIOUS DEVELOPMENT WORK OF DHAMNAGAR COLLEGE, DHAMNAGAR,

BHADRAK, ODISHA. (150 BEDDED GIRLS HOSTEL )

Schedule Non-Schedule Schedule Non-Schedule

Sl No Description Unit Qty

Rate Rate Amount Amount

1 A- Internal Sanitary & Plumbing System

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming

to IS:15778/ASTM Pipe, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings including fixing the pipe

with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and testing of joints complete as per direction of

Engineer-in-Charge

In ground floor

20mm dia C-PVC Pipes Mtr 60 325.208 0 19512.48

2 25mm dia C-PVC Pipes Mtr 50 429.402 0 21470.1

3 In First Floor

20mm dia C-PVC Pipes Mtr 60 338.778 0 20326.68

4 25mm dia C-PVC Pipes Mtr 50 442.972 0 22148.6

5 In Second Floor

20mm dia C-PVC Pipes Mtr 35 352.348 0 12332.18

6 25mm dia C-PVC Pipes Mtr 30 456.542 0 13696.26

7 In 3rd Floor (Terrace)

20mm dia C-PVC Pipes Mtr 10 366.036 0 3660.36

8 25mm dia C-PVC Pipes Mtr 20 470.23 0 9404.6

9 Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor

pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following

nominal bore with clamps including making good the wall, ceiling and floor all complete

as per specification and direction of the Engineer in charge(Supreme/Ashirvad/Oriplast)

25mm UPVC ASTM Pipe Mtr 30.00 362.26 0 10867.8

25mm UPVC ASTM Pipe Mtr 30.00 375.712 0 11271.36

12 32mm UPVC ASTM Pipe Mtr 35.00 493.83 0 17285

25mm UPVC ASTM Pipe Mtr 15.00 389.164 0 5837.46

15 3rd Floor (Terrace)

25mm UPVC ASTM Pipe Mtr 10.00 402.616 0 4026.16

17 40mm UPVC ASTM Pipe Mtr 50.00 640.032 0 32001.6

18 Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil

waste ventilating pipes and fittings of the following outside diameter

conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden

plugs or laying in trenches including jointing with supply of approved rubber

lubricant by non-heat application method/as per manufacturer’s specification,

testing, earthwork in excavation in all kinds of soil and refilling of trenches as

per specification and direction of the Engineer in charge. (Supreme, Astral,

19 75mm PVC plain bend Each 25 217.12 0 5428

20 75mm PVC socket plain Each 30 95.934 0 2878.02

23 110mm PVC socket plain Each 30 188.918 0 5667.54

24 110mm PVC plain bend Each 30 273.76 0 8212.8

25 110mm PVC door bend Each 10 346.448 0 3464.48

26 110mm PVC door Tee Each 10 455.48 0 4554.8

27 110mm PVC plain Tee Each 35 380.786 0 13328

28 110mm PVC door cross Tee Each 6 650.416 0 3903

29 110mm dia U-PVC Offset without ear Each 4 480.732 0 1923

30 110mm PVC vent cowl Each 22 68.676 0 1511

31 PVC clamp suitable for 75 mm to 110mm dia pipe Each 35 50.504 0 1768

32 Supply,Providing, fixing, testing and commissioning in position UV stabilised

75 mm dia UPVC Rain water pipe with Fittings (IS: 13592 Type - B). In case

of ceiling hanging, the supply of Pipe Clamps (Chilly/MS angle) as per engineer

in charge.110 mm diameter. (IS:13592, Type -B). Mtr 80 419.1596 0 33533

33 Supply,Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain water

Digitally signed by JAYA

34 Supplying all materials , labour, T&P and fixing Vitreous china water closet

,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly

embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size

including fixing a pair of vitreous china 250mmx130mmx30mm foot rest,

fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including

jointing the trap with pan in cement mortar (1:1), cutting the floor and mending

good the damages etc. all complete as per P.H. specification and direction of

Engineer-in-charge .

580mmx440mm size Orissa Pan (White) (Parryware/ Hindware/ Somay/ Cera) Each 10 2929.468 0 29295

35 Supplying all materials,labour,T&P and fitting and fixing vitrous Chaina

washed down water Closet (European type water closet - EWC) with integral

"P" or "S" type trap to the floor including wodden plug and chromoum plated

screw including jointing the trap with soil pipe in CM(1:1) fixing plastic seat

cover for washed down water closet with crmium plated brass hinges and rubber

buffers including polishing etc all complete as per specification and direction of

Engineer-in-charge.

European Water Clost "S" or "P" trap (Parryware/ Hindware/ Somany/ Cera) Each 25 3289.84 0 82246

36 Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern

complete with fittings & seat cover, one no hinged rail 76 cm and five nos of

grab rails 60 cm) (Hindware). Each 1 78575.492 0 78576

37 Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity

low level flushing cistern with a pair of cast iron or M.S brackets complete with

fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve

with polythene float CP brass handle, unions and couplings for connection with

inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet

connection pipe including cutting holes and making good the same and

connecting the flush bend with cistern and closet and connecting the inlet pipe

with supply main etc all complete as per specification and direction of the

Engineer in charge.

10 litres PVC L.L. Cistern (Slimline-white)

38 32mm dia flush bend for L/L cistern Each 35 81.774 0 2863

39 Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar

taps with cast iron or MS brackets painted white including cutting holes in walls

and making good the damages with supply of wooden plugs, screws and cement

etc. fixing pedestral for wash basin recessed at the back for the reception of

pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash

basin including brass check nut complete, fixing pillar taps capstan head screw

down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back

nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and

making connection with pillar cocks and supply mains for wash basin , fixing

12mm dia CP brass waste etc.all complete as per specification and direction of

Engineer-in-charge.

550mmx400mm size wash hand basin with Porcelain

pedestal(Parryware/Hindware/Somay/Cera) Each 5 9106.178 0 45531

Under Counter basin (560x450) (Hindware) Each 33 4564.712 0 150636

40 32mm dia PVC waste pipe with brass coupling nut Each 38 62.5754 0 2378

41 15mm dia PVC inlet connection pipe 0.45m long Each 38 42.126 0 1601

42 Supplying all materials, labour, T&P and fixing wash Kitchen sink/ Laboratory

sink with outlet at end and weir overflow including fitting and fixing a pair of

cast iron or MS brackets painted white, fixing 50mm/40mm dia ss waste, fixing

50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs,

screws and cement etc including cutting holes in walls and making good the

damages etc all complete as per specification and direction of the Engineer in

charge. 600x450x250 mm stainless steel kitchen sink (Jayna make)

43 Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of

the following nominal bore with supply of all jointing materials complete as per

specification and direction of the Engineer in charge. (Jaquar/ Hindware/ Cera/

15mm dia CP 2way bib cock Each 25 1085.6 0 27140

44 15mm dia CP Health faucet with Hose Pipe Each 25 895.62 0 22391

45 15mm dia CP Short Body Bib cock Each 13 824.82 0 10723

46 15mm dia CP Long Body Bib cock Each 35 919.22 0 32173

47 15mm dia CP Angle stop cock with wall Flange Each 75 1393.816 0 104537

48 15mm CP Revolving shower with shower Arm. Each 35 743.282 0 26015

49 20mm dia CP Consealed Stop Cock Each 35 2003.64 0 70128

50 Sink Cock (Wall Mounted) with wall Flange Each 2 1532.82 0 3066

51 15mm dia CP Pillar cock Each 38 1096.22 0 41657

52 15mm dia CP extension piece Each 60 69.974 0 4199

53 PVC Connection Pipe Each 60 40.12 0 2408

54 PVC Discharge Pipe Each 38 92.748 0 3525

55 15mm dia. C.P flange Each 80 47.554 0 3805

56 125mm dia CP gratting Each 95 110.33 0 10482

Digitally signed by JAYA

57 Supplying all materials ,labour ,T&P and fixing standard sized CP brass towel

rail / Towel ring complete with CP brass brackets fixed to wooden plugs with

chromium plated brass screws etc.all complete as per specification and

direction of Engineer-in-charge .

25mmx600mm long CP Towel rail Each 35 886.062 0 31013

58 C P Towel Ring Each 38 611.358 0 23232

59 Supplying all materials ,labour ,T&P and fixing CP Soap Holder/ Soap

Dispenser complete with CP brass brackets fixed to wooden plugs with

chromium plated brass screws etc.all complete as per specification and

direction of Engineer-in-charge .

CP soap holder Each 35 253.228 0 8863

60 CP soap dispenser Each 38 1567.984 0 59584

61 Supplying all materials, labour, T&P and fixing of Stainless Steel Coat Hook

alongwith all necessary accessories complete including cutting, making good

the walls, floors, slab wherever complete in all respect as per specification and

direction of the Engineer in charge. (Jaquar/ Hindware/ Cera) .

Stainless Steel Coat Hook - Double (Euronics EC02)

62 Supplying all materials ,labour ,T&P and fixing Mirror of superior glass

mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs

with chromium plated brass screws and washers etc.all complete as per

specification and direction of Engineer-in-charge.

Mirror (Bevelled edge) 600mmx450mm Each 38 1961.986 0 74556

63 Supplying all materials, labour, T&P and fitting and fixing G.M/ Brass fittings

of the following nominal bore with supply of all jointing materials complete as

per specification and direction of the Engineer in charge.

25mm dia Brass F.W valve (Sakti make) Each 15 1168.5068 0 17528

64 32mm dia Brass F.W valve (Sakti make) Each 8 1711.4366 0 13692

65 40mm dia Brass F.W valve (Sakti make) Each 5 2165.4062 0 10828

66 40mm dia CPVC Ball valve Each 4 1116.339 0 4466

67 Supplying all materials, labour, T&P and providing fitting and fixing (Aqua

guard) Pure Chill 120 PSS UV (Eureka Forbes)of size 750x570x1350mm height

with water storage capacity 120 liters along with 3 nos of faucets 2 for cold

water and 1 for normal water including a flow of 1.5 ltr per minute etc all

complete as per approved drawing,specification and direction of the Engineer

68 Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene

cylindrical vertical water storage tanks conforming to IS : 12701--1996

including cutting holes through the tank and fixing mild steel tubes and fittings

and providing extra sockets and jam nuts, fixing ball valve etc, including

hoisting upto a height of 5 metres above ground level and placing the tank to the

required position and providing 1st class K.B brickwork in cement mortar (1:6)

of 0.46m height in staging and in circular protection wall to support the tank,

12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size

1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m

average length in cement concrete(1:2:4) using 12mm size h.g chips including

centering and shuttering, watering, curing, conveyance of all materials to

worksite etc all complete as per specification and direction of the Engineer in

Fixing 2000Ltr Roto-moulded water storage tanks-In Terrace floor

69 B- External Supply & Discharge portion

Supplying all materials ,labour ,T&P and constructing gully trap chamber of

inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement

concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation

concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around

trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside

12mm thick cement plastering (1:3) finished with a floating coat of neat cement

including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI

grating etc.all complete as per drawing, specification and direction of Engineer-

In side size 250mmx250mm

70 Supplying all materials, labour, T&P and constructing inspection chamber of the

following size with cement concrete(1:3:6) using 40mm size hard granite metal

on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and

shaping the channel inside and benching with cement concrete (1:2:4) using

12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside,

cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm

size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds

of soil and refilling the cavity around the chamber including watering, curing,

conveyance of all materials to worksite, payment of royalty, taxes etc all

complete as per approved specification and direction of the Engineer in charge.

Inside size : 760mmx760mmx460mm

71 Providing Lowering, Laying, Jointing and Testing Work of non-pressure NP 3

class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints:

Digitally signed by JAYA

72 C- Construction 1 nos 150 users RCC Septic tank

Earth work in excavation of foundation in all kinds of soil within 50m initial

lead and 1.5m initial lift including rough dressing & breaking clods to

maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as

per direction of the Engineer-in-Charge.

73 - do - with addl. Depth of 1.5 m

74 Supplying all materials,labour ,T&P and filling in foundation and plinth with

sand well watered and rammed including cost, conveyance of all materials to

work site ,payment of royalty,taxes etc. all complete as per direction of the

Engineer-in -charge.

In ground floor- 1x9.90mx4x0.15m= cum 5.94 1194.986 0 7099

75 Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 )

with 4cm size crusher broken hard granite metal including watering, curing,

cost of all materials,conveyance of all materials to work site with payment of

royalty, all taxes etc all complete as per P.W.D specification and direction of

Engineer-in-charge.

In ground floor- 1x9.90mx4x0.15m= cum 5.94 7051.798 0 41888

76 Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 )

with 12mm size crusher broken hard black granite chips including watering,

curing,cost of all materials, conveyance of all materials to work site with

payment of royalty, all taxes etc all complete as per P.W.D specification and

direction of Engineer-in-charge.

In ground floor- 1x8.90mx3x0.13m= cum 3.47 9391.62 0 32599

77 Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3)

with 12mm size hard broken granite chips for R.C.C works including hoisting,

laying, watering, curing, conveyance of all materials to worksite, payment of

royalty, taxes etc all complete as per specification and direction of the Engineer

78 Supplying all materials, labour, T&P and providing rigid and smooth centering

and shuttering for R.C.C works including false work and dismantling them after

casting including conveyance of all materials to worksite, payment of royalty,

taxes etc all complete as per specification and direction of the Engineer in

A. For Roof slab sqm 37.15 889.248 0 33036

79 Supplying all materials, labour, T&P and providing M.S reinforcement for

R.C.C work including cutting, bending, binding, and tying the grills and placing

in position including cost of binding wire 18 to 20 gauge, conveyance of all

materials to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

In ground floor Qntl 22.3 10351.786 0 230845

80 Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement

punning on brick work including watering,curing,cost of all materials,

conveyance of all materials to worksite,payment of royalty,all taxes etc.all

complete as per PWD specification and direction of the Engineer-in-charge.

81 Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x

100mm x 100mm SW Tee in wall including filling the recess with cement

concrete (1:3:6) with 12mm size h.g chips all complete including watering,

curing, conveyance of all materials to worksite, payment of royalty all complete

as per specification and direction of the Engineer in charge Each 2 542.092 0 1085

82 Supplying all materials, labour, T&P and making MS step iron in 20mm

diameter MS steel bars and fixing into walls of man hole/septic tank duly

embedded in cement concrete (1:3:6) complete as per specification and

direction of the Engineer in charge. Each 10 335.592 0 3356

83 Filling in foundation and plinth with excavated materials, moorum including

watering and ramming as directed by the Engineer in charge. cum 10 191.278 0 1913

84 Supplying all materials, labour, T&P and constructing soakway pit of the

following size with dry brick walling from bottom upto invert of inlet pipe and

fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement

concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster

(1:4) inside and outside over masonry brickwork, gravel backing in the rear of

well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg

chips fitted with iron lifting handles including earthwork in open well

excavation in all kinds of soil and refilling of cavity around the pit & painting

the iron works, watering, curing, conveyance of all materials to worksite,

payment of royalty, taxes etc all complete as per approved specification and

direction of the Engineer in charge 1.40m dia x 2.00m deep soakway pit .

Digitally signed by JAYA

Project Name: PROPOSED VARIOUS DEVELOPMENT WORK OF DHAMNAGAR COLLEGE, DHAMNAGAR, BHADRAK, ODISHA. (150

BEDDED GIRLS HOSTEL )

INTERNAL ELECTRICAL WORKS

Schedule Non-Schedule Schedule Non-Schedule

Sl.No. Description of work Unit Qty

Rate Rate Amount Amount

A. Circuit Cum Wiring

1 Supplying & Wiring for light point/ fan/ exhaust fan point/ call

bell point with 1.5 sqmm FRLS PVC insulated copper conductor

single core cable in surface / recessed 1.6 mm thick PVC

conduit with modular switch and earthing the point with 1.5

sqmm FRLS PVC insulated copper conductor single core cable

including providing modular box with cover of requisite number

of modules including providing cover plates as required.

a) Single light point controlled by one 6A switch or first light point

of group control. Each 647 1516.3 0 9,81,046.10 -

Supplying & Wiring for light point/ fan/ exhaust fan point/ call

bell point from first light point/ fan/ exhaust fan point/ call bell

point with 1.5 sqmm FRLS PVC insulated copper conductor

single core cable in surface / recessed 1.6 mm thick PVC

conduit and earthing the point with 1.5 sqmm FRLS PVC

insulated copper conductor single core cable as required.

3 Supplying & Wiring for twin control light point with 1.5 Sqm.m

FRLS PVC insulated copper condutor single core cable in

surface/ recessed PVC conduit 2 way modular switch,modular

plate, suitable GI box and earthing the point with 1.5 Sqm.m

.FRLS PVC insulated copper conductor single core cable etc as

4 Supplying and fixing two module steeped type electronic fan

regulator with proper modular plate switch box including

connections etc. as required. Nos 131 598.26 0 78,372.06 -

5 Supplying, fixing of 6A switch socket on the same board in

existing switch board with complete fitting by 01 no of 6A switch

& socket (modular type) & other required accessories of ISI

marked as approved as per direction of Eng. -in -Charge.

6 Supplying & fixing suitable size GI Box with modular plate and

cover in front on surface or in recess, including providing and

fixing 2nos 3pin 5/6 amps modular socket outlet and 2nos 5/6

amps modular switch etc. as required. Nos 167 1151.68 0 1,92,330.56 -

7 Supply, installation, testing & commissioning of 6 / 16 Amp Plug

Boards consisting of a 16 Amp clip-in type modular switch with

indicator and a 6/16 Amp clip-in type modular shuttered plug

socket fixed on metallic concealed box including

interconnections and making good the damages caused

complete as required and as per direction of Engineer-in-

8 Supply, installation, testing & commissioning of 6 / 16 Amp Plug

Boards consisting of 2nos 16 Amp clip-in type modular switch

with indicator and 2nos 6/16 Amp clip-in type modular shuttered

plug socket fixed on metallic concealed box including

interconnections and making good the damages caused

complete as required and as per direction of Engineer-in-

9 Supplying and fixing AC point consisting of 20A socket outlet

Modular type along with 25A starter with all connections and

accessories as required as per direction of Engg.-in-Charge.

10 Supply and Wiring for circuit/ submain wiring along with earth

wire of following size of FRLS heavy gauge PVC insulated

copper conductor single core cable in heavy duty PVC conduit

laid in surface/ recess as required. 0 0 - -

B. Fan & indoor Fixtures 0 0 - -

11 Supply, delivery and fixing of Ceiling fan hook box made out of

18 swg GI sheet and containing 10 mm dia round ms bar

projecting atleast 150mm on either side & duly bent to

accommodate ceiling fan down rod bolt & having earthing

arrangement as per direction of Engineer-in-charge.

Digitally signed by JAYA

12 Supplying an fixing of recess/surface mounted 2'x2' 36W

square shaped LED with lumen efficacy not less than 100lm/W,

CRI not less than 80, CCT of 5700-6500 degree K, THD less

than 10%,internal surge protection of 3 KV, complete with Non

integrated isolated electronic driver (protects the output

/secondary side from any disturbance on the input / primary

side ensuring safe operation)and all other accessories suitable

for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs as

required as per direction of Engg.-in-Charge.

13 Supplying and fixing of Energy efficient surface /recess

mounted square /round shape 18 W LED luminaire of

dimension of consists of white powder coated , die-cast

Alluminium housing with high quality frosted diffuser for glare-

free uniform lighting distribution with wattage not more than 18

watt and lumen output of 1800 lumens, , CRI not less than

80,CCT of 6000 degree K,THD less than 10%, with electronic

driver, internal surge protection of 3 KV , L70 B50: 50000 hrs

and all other accessories suitable for operation on 220 V to 240

V supply as required as per direction of Engg.-in-Charge.

14 Supplying and fixing of Energy efficient surface /recess

mounted square /round shape 9 W LED luminaire of dimension

of consists of white powder coated , die-cast Alluminium

housing with high quality frosted diffuser for glare-free uniform

lighting distribution with wattage not more than 9 watt and lumen

output of 900 lumens, , CRI not less than 80,CCT of 6000

degree K,THD less than 10%, with electronic driver, internal

surge protection of 3 KV , L70 B50: 50000 hrs and all other

accessories suitable for operation on 220 V to 240 V supply as

required as per direction of Engg.-in-Charge.

15 SITC of energy efficient LED tube light fittings with decorative

alluminium batten and LED tube light having power rating not

more than 20 watt and lumen output not less than 2000 lumen

complete with electronic driver and all other accessories with

diffuser having 2 years warranty i/c connection etc as required

as per direction of Engg.-in-Charge.

16 SITC of Sleek LED 10 watt mirror light fitting with extruded

polycarbonate housing,High optically efficient diffuser, above

wash basin complete with all accessoriesetc. directly on wall,

including connection with 1.5 sq. mm FRLS PVC insulated,

copper conductor, single core cable and earthing etc. as

required as per direction of Engg.-in-Charge.

17 Providing and fixing IP65 LED Bulk Head Light of 15w with UV-

resistant housing, opal diffuser, PF ≥ 0.90 driver, CRI ≥80,

complete with necessary mounting accessories, wiring, testing

and commissioning as required at site. Each 5 0 1840.8 - 9,204.00

18 90W Street Light IP66 mounted with 32mm dia 800mm length

19 Supply and fixing Call bell (Ding dong type)/ Buzzer on the

existing switch box/cover as required as per direction of Eng.-in-

Charge. All the Components should be warrantied for a

replacement period of 2 years against defects with necessary

test report & Warranty certificate to be submitted to the

department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

20 Supplying and fixing extra conduit down rod of 20 cm length G.I.

pipe 15 mm dia, heavy gauge including painting etc. as

requiredas required as per direction of Engg.-in-Charge . (Note :

More than 5 cm length shall be rounded to the nearest 10 cm

and 5 cm or less shall be ignored)of ISI mark as approved.

21 Supplying, installation, testing and commissioning of 1200 mm

sweep white/milky colour BLDC copper winding ceiling fan with

aluminium blades having wattage not more than 28W and air

delivery ≥215m3/min including wiring the down rod of standard

length (up to 30 cm) with 1.5 sq. mm PVC insulated, copper

conductor, single core cable etc. as required as per direction of

22 Supplying, installation, of exhaust fan of heavy duty 300 mm

sweep 1400 rpm with louvers of exhaust fan in the existing wall,

including fixing & connection as required as per direction of

Eng.-in-Charge. Each 6 0 3919.96 - 23,519.76

23 Supplying, installation, of exhaust fan of heavy duty 380 mm

sweep 1400 rpm with louvers of exhaust fan in the existing wall,

including fixing & connection .as required as per direction of

Eng.-in-Charge. Each 9 0 4570.14 - 41,131.26

Digitally signed by JAYA

C. Panels, MDBs, DBs. MCBs 0 0 - -

Panels indoor Type 0 0 - -

Supply, installation, testing and commissioning of cubicle type

sectionalised, front operated top entry dust and vermin proof

M.V.Panel Boards suitable for operation at 415V, 3 phase, 4

wire, 50Hz distribution system fabricated out of 2.0 mm thick

CRCA sheet, insulated busbar with heat shrienkable PVC

sleeve, base channel, wiring with space heater, thermostat and

control MCBs shall be provided for all vertical sections of main

LT Panel, all hinged door shall be earthed through 2.5 sq mm

tinned braided, the incoming and outgoing feeders shall be

accommodated in a modular arrangement, detachable gland

plates, adequate size cable alley, Sign writing, Painting,

Earthing, Numbering, Danger plate, including PVC insulated

copper FRLS wires of minimum 1.5 sq.mm & 2.5 sq.mm for

CT's etc. with all accessories including interconnections, earth

bus, Surge protection Device(SPD) etc. as required.(All the

incomers of the panel must be mounting with RS 485

communication port for BMS Compartibility)

24 MAIN LT PANEL 0 0 - -

Busbar -400 Amp Al busbar with SC rating of 50 KA suitable for

operation at 415 Volt, 50 Hz, 3 Phase supply 0 0 - -

Two(2)-Incomer feeders (1 nos from EB/Raw & 1 nos from

DG Set) each comprising of 0 0 - -

One (1) - 415V, 320 A, 36KA, TPN, MCCB with microprocessor

controlled OL/ SC and EF releases, shunt trip release, auxilliary

contacts and terminals taken out suitable for bustrunking

termination as required. 0 0 - -

One(1)- Multifunction digital meter suitable for three phase

four wire system, unbalanced loading CL 1.0, flush mounting

with RS 485 communication port for reading Voltage, Current,

pf. KW, KWH, KVA, KVAr, KVAh, KVArHr (BMS Compartibilty)

One set - Indicating lamp for ON/OFF/Trip and Phase indication

with control fuse/ MCB. 0 0 - -

One(1) set of 320/5A ,15VA , Cl 1.0, CTs. 0 0 - -

1Set of 320Amps 4Pole Changeover switch 0 0 - -

Five(5) - Outgoing Feeders (For 2nos Lift Panel, 1no Fire

panel, 1no 10KVA Ups and One Spares) each comprising of

One (1) - 63A,TPN, 25KA,MCCB 0 0 - -

One Set ON/OFF Indicating lamp with control fuse/ MCB with

required other accesories. 0 0 - -

Eight(8) - Outgoing Feeders for (6nos LDB and 6nos PDB

and 3Nos spares) each Comprising of 0 0 - -

One (1) - 63 Amp 4P, 10 KA MCB (C-Curve) 0 0 - -

Eight(8) - Outgoing Feeders for (6nos LDB and 6nos PDB

and 3Nos spares) each Comprising of 0 0 - -

One (1) - 40 Amp 4P, 10 KA MCB (C-Curve) 0 0 - -

Four(4) - Outgoing Feeders for (Four spare) each

Comprising of 0 0 - -

One (1) - 32 Amp DP, 10 KA MCB (C-Curve) 0 0 - -

25 UPS OUTGOING PANEL 0 0 - -

Supply, installation, testing and commissioning of cubicle type

sectionalised, front operated top entry dust and vermin proof

M.V.Panel Boards suitable for operation at 415V, 3 phase, 4

wire, 50Hz distribution system fabricated out of 2.0 mm thick

CRCA sheet, insulated busbar with heat shrienkable PVC

sleeve, base channel, wiring with space heater, thermostat and

control MCBs shall be provided for all vertical sections of main

LT Panel, all hinged door shall be earthed through 2.5 sq mm

tinned braided, the incoming and outgoing feeders shall be

accommodated in a modular arrangement, detachable gland

plates, adequate size cable alley, Sign writing, Painting,

Earthing, Numbering, Danger plate, including PVC insulated

copper FRLS wires of minimum 1.5 sq.mm & 2.5 sq.mm for

CT's etc. with all accessories including interconnections, earth

bus, Surge protection Device(SPD) etc. as required.(All the

incomers of the panel must be mounting with RS 485

communication port for BMS Compartibility)

One (1) no Incomer- 63 Amp FP ,16 KA MCCB with 3 Nos 0

Phase indicating lamps with control fuse/ MCB Digital Voltmeter

and Ammeter with selector switch with required other

accesories. 0 - -

Digitally signed by JAYA

Busbar - 100 Amp,16KA AL TPN busbar suitable for operation 0

at 415 Volt, 50 Hz, 3 Phase supply 0 - -

Two(2) - Outgoing Feeders for (2nos spares) each 0

Comprising of 0 - -

One (1) - 32 Amp 4P, 10 KA MCB (C-Curve) 0 0 - -

Eight(8) - Outgoing Feeders for ( 6nos ELDB and 2Nos 0

spares) each Comprising of 0 - -

One (1) - 32 Amp DP, 10 KA MCB (C-Curve) 0 0 - -

26 Lift Panel 0 0 - -

Supply, installation, testing and commissioning of cubicle type

sectionalised, front operated top entry dust and vermin proof

M.V.Panel Boards suitable for operation at 415V, 3 phase, 4

wire, 50Hz distribution system fabricated out of 2.0 mm thick

CRCA sheet, insulated busbar with heat shrienkable PVC

sleeve, base channel, wiring with space heater, thermostat and

control MCBs shall be provided for all vertical sections of main

LT Panel, all hinged door shall be earthed through 2.5 sq mm

tinned braided, the incoming and outgoing feeders shall be

accommodated in a modular arrangement, detachable gland

plates, adequate size cable alley, Sign writing, Painting,

Earthing, Numbering, Danger plate, including PVC insulated

copper FRLS wires of minimum 1.5 sq.mm & 2.5 sq.mm for

CT's etc. with all accessories including interconnections, earth

bus, Surge protection Device(SPD) etc. as required.(All the

incomers of the panel must be mounting with RS 485

communication port for BMS Compartibility)

One (1) no Incomer comprising of- 63 Amp FP ,25 KA MCCB

with 3 Nos Phase indicating lamps with control fuse/ MCB

Digital Voltmeter and Ammeter with selector switch with

required other accesories. 0 0 - -

Busbar - 200 Amp Al busbar with SC rating of 25 KA suitable

for operation at 415 Volt, 50 Hz, 3 Phase supply 0 0 - -

One (1) no Outgoing comprising of- 63 Amp FP ,25 KA MCB

for Lift 0 0 - -

Four (4) - Outgoing feeder with 32A,2P, 10KA MCB for ARD

battery charger,Lift well lighting & one nos spare 0 0 - -

PANEL AS ABOVE Set 0 0 63664.54 - -

27 Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator). (For all Floors DB) 0 0 - -

28 Supplying and fixing following way, horizontal type SPN, sheet

steel, MCB distribution board, 230 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earth bar,

din bar, interconnections, powder painted including earthing etc.

as required. (But without MCB/RCCB/Isolator).

29 Supplying and fixing following rating MCBs/ Isolator in the

existing MCB DB complete with connections, testing and

commissioning etc. as required. 0 0 - -

a) 63 Amps, FP 10 KA MCB (C-Curve) Each 7 0 3499.88 - 24,499.16

b) 40 Amps, FP 10 KA MCB (C-Curve) Each 7 0 3499.88 - 24,499.16

c) 63 Amps, DP 10 KA MCB (C-Curve) Each 7 0 1136.34 - 7,954.38

d) 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 302 378.78 0 1,14,391.56 -

30 Supplying and fixing following rating RCCB/ELCB in the existing

MCB DB complete with connections,testing and commissioning

etc. as required 0 0 - -

Cables, Cable Laying & Termination 0 0 - -

31 Supplying & Testing of 1.1 KV grade Aluminium XLPE power

cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.

32 Supplying & Testing of 1.1 KV grade Cu XLPE Un Armoured

(Flexible) power cable of following size suitable for 415 Volt,

3Ph, 50 c/s supply. 0 0 - -

CABLE LAYING 0 0 - -

Digitally signed by JAYA

33 Laying of one number PVC insulated and PVC sheathed / XLPE

power cable of 1.1 KV grade of following size direct in ground

including excavation, sand cushioning, protective covering and

refilling the trench etc as required. 0 0 - -

a) Above 25 sq. mm and upto 120 sq. mm Mtr 60 210.04 0 12,602.40 -

34 Laying of One No. PVC insulated and PVC sheathed/XLPE power

cable of 1.1 KV grade of following size in the existing On Wall

Surface(Clamped with saddle/ PVC & UPVC Pipe)/ CableTray as

required. 0 0 - -

a) Above 25 sq. mm and upto 120 sq. mm Mtr 60 188.8 0 11,328.00 -

TERMINATION OF CABLES 0 0 - -

35 Supply & Making end Termination with brass compression gland

and Cu/aluminium lugs for PVC insulated and PVC sheathed

cable of 1.1 kv grade (without cost of Cable) 0 0 - -

CABLE TRAY 0 0 - -

36 Supply, fabricating and installing following size of hot dip G.I.

perforated type cables trays including suspending from ceiling

with angle, rods connection pieces, horizontal vertical bends,

reducers, tees, cross members,G.I. nut bolts, G.I. washers,

fasteners etc. complete as required per specifications &

approved by the Engineer Incharge. 0 0 - -

a) 150 mm (W) X 50 mm depth X 1.6 mm thickness Mtr 150 0 610.06 - 91,509.00

b) 300 mm (W) X 50 mm depth X 1.6 mm thickness Mtr 250 0 1093.86 - 2,73,465.00

37 Supply, delivery, installation & testing of TV outlet boards

containing a clip-in type modular TV Socket outlet fixed on

metallic concealed box including connections and making good

the damages caused complete as required and as per direction

of Engineer-in-charge. Each 4 522.74 0 2,090.96 -

38 Wiring to TV Antenna Socket outlet from junction box with

Coaxial copper conductor TV antenna cable run inside pvc

conduit complete including termination, testing etc complete as

required and as per direction of Engineer-in-charge.

39 Supply, Installation, Testing & Comissioning of 10KVA /10KW

true online double conversion UPS system (3Ph-3Ph) with

inbuilt Isolation transformer , with phase sequence correctior,

built in BMS, with IEC62040-1,2,3 certification, DC cable

7meters interlink,SFU and 16nos 12Volt 65AH SMF batteries

back up of 30miniutes with each UPS and MS rack for battery

Housing wit 2years warrenty on both UPS and Battery.

Earthing 0 0 - -

40 Supply & Fixing of Copper plate Earthing (600x600x3mm thick)

ISI marked with Copper nut bolts & washers including cost of

burnt wood charcoal, salt, foreign soil, water pouring

arrangements, brick masonary enclosure on top with removable

RCC cover complete with labour for excavation of pit in all kinds

of soil & rock as required and as per direction of Engineer-in-

charge.The entire earthing system should be Replacement

Warranty will be 2 years Set 4 15096.92 0 60,387.68 -

41 Supplying,installation,testing & commissioning of materials and

installation of GI earth plate 600mmx600mmx6mm thick ISI

marked with G. I. nut bolts & washers including cost of burnt

wood charcoal, salt, foreign soil, water pouring arrangements,

brick masonary enclosure on top with removable RCC cover

complete with labour for excavation of pit in all kinds of soil &

rock as required and as per direction of Engineer-in-charge.The

entire earthing system should be Replacement Warranty will be Set 2 7670 0 15,340.00 -

Providing and fixing 25 mm X 5 mm dia copper strip on

wall/surface or in recess for connection etc. as required. Mtr 60 1006.54 0 60,392.40 -

43 Providing and fixing 25mm x 5 mm GI strip on surface or in

recess for connections etc. as required as per direction of Engg.-

F LIGHTING ARRESTER 0 0 - -

44 Providing and fixing of lightning conductor finial made of 25 mm

dia 300 mm long, copper tube, having single prong at top, with

85 mm dia 3 mm thick copper base plate including holes etc.

complete as required. Nos 25 813.02 0 20,325.50 -

45 Reveting, sweating and soldering of copper / G.I. tape ( with

another copper / G.I. tape, base of the finial or any other

metallic object) as required. Nos 25 211.22 0 5,280.50 -

46 Providing and fixing of copper tape 20 mm x 3 mm thick on

parapet or surface of wall for lightning conductor complete as

required. (For horizontal run) Mtr 400 299.72 0 1,19,888.00 -

Digitally signed by JAYA

47 Providing and fixing of copper tape 20 mm x 3 mm thick on

parapet or surface of wall for lightning conductor complete as

required. (For vertical run) Mtr 80 352.82 0 28,225.60 -

48 Providing and fixing of testing joint, made of 20 mm x 3 mm

thick Copper strip, 125 long with 4 nos of G.I. bolts, check nuts

and spring washer etc complete as required. Nos 8 109.74 0 877.92 -

49 Providing and laying of copper tape 32 mm x 6 mm from earth

electrode directly in ground as required. Mtr 80 808.3 0 64,664.00 -

50 Supply of UL Listed maintenance free ,Low carbon copper

coated earth rod of 3 metre electrode having diameter of 17.2

mm with copper coating thickness of 250micron tested as per

51 Supply of universal clamp made of SS to connect rod with flat

52 Supply of Earth conductivity enhancing mineral compound shall

be of 25 kg/pit tested as per IEC 62561-7,TCLP tested.

53 Supply of The above arrangements shall be provided with

Heavy duty earth champer of 5000kg load bearing capacity to

ensure the safety of earthing system. No 8 2559.42 0 20,475.36 -

Digitally signed by JAYA

Project Name: PROPOSED VARIOUS DEVELOPMENT WORK OF DHAMNAGAR COLLEGE, DHAMNAGAR, BHADRAK, ODISHA. (150 BEDDED

Schedule Non-Schedule Schedule Non-Schedule

Sl No Item Description Unit Qty

Rate Rate Amount Amount

1 Terrace Pump

Supplying, installation, testing and commissioning of electric driven

terrace pump suitable for automatic operation and consisting of

following, complete in all respects, as required: (Terrace Pump)

Horizontal type, multistage, centrifugal, split casing pump of cast

iron body & bronze impeller with stainless steel shaft, mechanical

confirming to IS : 1520

Suitable HP squirell cage induction motor TEFC type suitable for

operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class

of protection for enclosure, horiziontal foot mounted type with

Class-'F' insulation, conforming to IS-325.

M.S.fabricated common base plate, coupling, coupling guard,

foundation bolts etc.as required.

Suitable cement concrete foundation duly plastered and with anti

vibration pads.

450 lpm at 35 m Head

Pump as Above Set 1 94400 0 94,400.00 -

2 MCC Panel 0 0 - -

Supply, installation, testing and commissioning of Wall mounted

sectionalised, front operated top entry dust and vermin proof

M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire,

50Hz distribution system fabricated out of 2.0 mm thick CRCA

sheet, compartmentalised with hinged lockable doors, dust and

vermin proof, powder coated of approved shade after 7 tank

treatment process, cable alley, insulated busbar with heat

shrienkable PVC sleeve, base channel, complete with all

accessories including interconnections, proper earthing etc as

required. Make:-LEGRAND, L&T, Siemens or equivalent.

One (1)- 63 Amp, 10 KA,4P MCB with 3 Nos Phase indicating

lamps with control fuse/ MCB, Digital Voltmeter & Ammeter with

selector switch suitable for motor duty. 0 0 - -

One (1) - DOL with O/L and Single Phasing Preventor suitable for

10 HP motor(minimum). ON/OFF indication lamps, Auto manual

switch and ON/OFF push button. 0 0 - -

One (1) - Set of Auxilliary relay for automatic operation through

pressure switch. 0 0 - -

Panel As Above Set 1 0 32767.42 - 32,767.42

3 Supply, laying, connecting, testing & commissioning of following

size of 1.1 kv grade multicore aluminium conductor XLPE

insulated PVC sheathed armoured cable as per IS: 7098:1988

(Part-I) with upto date amendments etc. complete as required.

Tagging on both the ends will be done with aluminium tags etc.

complete as required.(Quantities as per site requirement shall be

finally estimated & executed accordingly with prior approval.)

a) 3 core x 16 sqmm Al. Ar. XLPE Cable (Fire Fighting MCC Panel to

Terrace Pump Set) Mtr 40 0 383.5 - 15,340.00

4 Supplying and making indoor end termination with brass

compression gland (Heavy duty) and suitable copper / aluminium

lugs for following size of XLPE insulated PVC sheathed copper/

aluminium conductor armoured/ unarmoured cable of 1.1 KV

grade including cost of ferrules, cable sockets, insulation tape &

other accessories etc. complete as required.

Supply and installing of following size of perforated hotdip G.I.

cable trays including horizontal and vertical bends, reducers, tees,

cross members and other accessories as required and duly

suspended from the ceiling with full threaded GI suspenders,

along the wall with supports and including painting etc. as required

& approved by thye Engineer Incharge. 0 0 - -

a) 100 mm width x 40 mm depth x 1.6 mm thickness Mtr 40 0 410.64 - 16,425.60

6 Providing, laying, testing & commissioning of 'C' class heavy duty

MS Pipe conforming to lS 3589 and 1239 including fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc.,fixing the

pipe on the wall/ceiling with proper core cutting & filling with

treatment, providing proper supports, using clamps and painting

with two or more coats of synthetic enamel paint of required shade

complete as required. 0 0 - -

a) 100mm dia (Heavy class) as per IS-1239(Part-I)/2004 Mtr 10 2993.66 0 29,936.60 -

b) 65mm dia (Heavy class) as per IS-1239(Part-I)/2004 Mtr 180 1321.6 0 2,37,888.00 -

c) 25mm dia (Heavy class) as per IS-1239(Part-I)/2004 Mtr 5 729.24 0 3,646.20 -

Digitally signed by JAYA

7 Providing, fitting & fixing of following size cast iron double flanged

slim seal wafer type Butterfly valves with EPDM rubber lined with

lever operated as per IS-13095 with ISI mark of pressure ratting

PN-1.60 including fixing the same with supply of required jointing

materials like rubber insertion, MS nuts & bolts, paint etc. and

testing the joints with required water pressure for all floors etc. all

complete as per specification & direction of E.I.C.

8 Providing, fitting & fixing of following size cast iron double flanged

Y type strainer with SS 304 perforated screen confirming to IS

1538 with ISI mark of pressure rating PN-1.60 including fixing the

same with supply of required jointing materials like rubber

insertion, MS nuts & bolts, paint etc. and testing the joints with

required water pressure & all complete as per specification &

direction of E.I.C. 0 0 - -

9 Providing, fixing, testing and commissioning of following size cast

iron double flanged type Non Return Valve as per IS- 5312 (Part

1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing

the same with supply of required jointing materials like flanges,

rubber insertion, MS nuts & bolts, paint etc. and testing the joints

with required water pressure etc. all complete as per specification

& direction of E.I.C. 0 0 - -

10 Providing, fixing, testing and commissioning of 25 MM C.I. single

Air Relief Valve with stop cock confirming to IS:14845/2000 with

ISI mark for water works purpose including fixing the same with

hydrant riser including testing & commissioning the system etc. all

complete as per approved specification & direction of EIC.

11 Providing, fixing, testing and commissioning of 25MM SS Ball

Valve suitable for test pressure of not less than 15kg/sqcm with

nuts, bolts, gaskets, necessary accessories etc. all complete as

per approved specification & direction of EIC.

12 Supply, Installation, Testing & Commissioning of Pressure gauge

of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves below of

suitable size with all accessories as per direction of Engineer-in-

13 Supply, Installation, Testing & Commissioning of Swinging pattern

wall fixing first aid hose reel made from MS sheet and waterways

and moving parts with rubber hose of 20 mm dia. and 30 mtrs.

long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585

Type-I., complete with all accessories as per direction of Engineer-

FIRE EXTINGUISHER 0 0 - -

Note : [1] All Fire Extinguisher shall be HCFC, CFC and Halons

free. [2] The Fire Extinguisher Manufacturer/Supplier shall provide

declaration, Technical Data Sheet/cutsheet of All type of Fire

extinguisher to be installed. 0 0 - -

14 Providing and fixing Carbon-di-oxide fire extinguishers consisting

of welded M.S cylindrical body,squeeze lever discharge valve

fitted with internal discharge tube, ISI marked high pressure

discharge hose, discharge nozzle, suspension bracket, confirming

to IS : 15683 finished externally with red enamel paint and fixed

to wall with brackets with rawl plug/dash fasteners complete with

internal charge with CO2 gas conforming to IS : 307-1996..

15 Providing and fixing ABC stored pressure dry chemical powder

(mono ammonium phosphate) Fire Extinguisher IS : 15683 latest

revision manufacturer and of CRCA sheet in welded construction,

finish with High quality epoxy polyster powder coated complete

with brass forged ball valve, gun metal cap and nozzle, including

initial filled and wall suspension bracket (suitable for fighting in

class 'A', B & 'C' that is wood, textile, flammable liquid, electric and

B MISCELLANEOUS WORK : 0 0 - -

Single sided EXIT LED Light fitting signage(both side visible) with

built in battery back-up for 2 hrs with proper wiring with PVC

conduiting from the existing power sources for all floors etc.

Digitally signed by JAYA