Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 LAccepted-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | NTR | ANDHRA PRADESH | 520001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹30.0 L+₹2.5 L (9.04%)Rejected-Finance MIG 1 12 GULLALAPALEM VUDA COLONY SRIHARIPURAM MALKAPURAM POST VISAKHAPATNAM 530 011 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530011 | L2 | Rejected-Finance Being not L1 | |
| 3 | L3₹31.4 L+₹3.8 L (13.9%)Rejected-Finance 3 42 MIG 192 SUJATHA NAGAR PENDURTHI MANDAL VISAKHAPATNAM 530051 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530051 | L3 | Rejected-Finance Being not L1 | |
| 4 | L4₹32.3 L+₹4.8 L (17.3%)Rejected-Finance D NO 39 12 27 1 3 MURALI NAGAR VISAKHAPATNAM 530007 | VISAKHAPATANAM | ANDHRA PRADESH | 530007 | L4 | Rejected-Finance Being not L1 | |
| 5 | L5₹32.7 L+₹5.2 L (18.8%)Rejected-Finance D NO 58 20 33 FLAT NO F 2 VAIKUNTAPARVATHI RESIDENCY APSEB COLONY BUTCHIRAJUPALEM VISAKHAPATNAM 530 027 | VISAKHAPATANAM | ANDHRA PRADESH | 530027 | L5 | Rejected-Finance Being not L1 |
Tender Value
₹43.6 L
EMD Value
₹87,200
Closing Date
13 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) DM Visakhapatnam
GE (I) DM Visakhapatnam
REPAIRS/REPLACEMENT OF MS GRATINGS, MS LADDERS, COPE POINT MS COVER AND CONNECTED WORKS FROM JETTY NO. N-17 TO N-22 AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) (DM) VISAKHAPATNAM
2023_MES_619089_1
8917/E8
Open Tender
Civil Works
Item Rate
180 days
Naval Dockyard Visakhapatnam
As per tender documents
9 documents required · 9 mandatory
₹500
GE (I) DM Visakhapatnam
₹87,200
Yes
27 Dec 2023
15 Sept 2023
20 Oct 2023
15 Sept 2023
13 Oct 2023
29 Sept 2023
Amount
Dismantling structural steel work including doors, railing, gates, trusses etc., complete all as specified and directed.
M&L for MS frame work such as grills, gratings etc with ends of bars, shouldered and / or riveted or forged into spikes for ladders framed balusters, walk ways, railings, nosing angle and similar works conforming to Fe-290, Gde E-165 at (-5m to -12m level and ground level) working in a confined area including making good the disturbed portion of concrete surfaces with 1:1 1/2 :3 type A0 using 12.5mm stone aggregate complete all as specified and directed.
S&F for rolled mild steel chequred plates confirming to Fe-290, Gde E-165 welded, riveted, bolted attachment to supporting structure of duct covers complete all as specified and directed.
M&L for painting of new steel surface of any description over 10cm width or girth with two coats of coal tar epoxy paint over a coat of zinc chromate primer complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat coal tar epoxy paint complete all as specified and directed. Note : - The work will be carried out in every three months or as per direction of Engineer-in-Charge for enhancing its serviceablity. Every coat / work will be measured and paid separately.
M&L for 32 mm dia mooring rings 02 Nos. fixed to 150x150x12 mm MS angle 300 mm long fixed with 04 Nos. nuts and bolts of 25 mm dia and 300 mm long drilled to RCC berth / beam and slabs and inserted the bolts and grouted with lock fix chemical and sand and stone aggregate including necessary welding and painted the steel surfaces with a coat of zinc chromate primer and two coats coal tar epoxy paint complete all as specified and directed.
S&F for horizontal and verticle railing with SS-304 grade 50mm dia 2mm thick round pipe for safety railing and ladder using welding made out of SS-304 heavy duty, maintenance free, corrosion resistant, aesthetic looking stainless steel extruted sections and fixed to the verticle and horizontal complete all as specified and directed.
Demolition of RCC any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilitate demolition including removal of debris outside Naval Dockyard premises complete all as specified and directed.
M&L RCC M 30 grade with approved Ready Mix Concrete / Design mix (RMC) with 20mm graded stone aggregate as in beams and columns in floors, roofs, landings, deck slabs, bases of ladders and in similar work complete all as specified and directed.
M&L for precast RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slabs of openings set in CM 1:6 complete. Note :- Reinforcement will be measured and paid saperately.
M&L for formwork to small surfaces such as cantiliver ends, brackets, ends of steps, caps and bases of pilasters and the columns and the like with fair finished surfaces complete all as specified and directed.
M&L mild steel TMT bars 10mm dia and over TMT bars cut to length, bent to shape required, including cranking, bending, spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for cutting holes into or through cement concrete (reinforced) 110 mm dia with diamond edge core cutting device for an average depth of 450 to 500 mm for insertain of HDPE pipes and making good the core cut holes with non shrink cementtious grout FOSROC - Conbextra GP2 suitable for static dynamic loads over FOSROC NITOBOND AR or equivalent or make as approved by GE for bonding old concrete to new and removing the rubbish outside of Naval dockyard premises complete all as specified and directed.
M&L for laying cement based Micro-concrete, Rendroc RG 40 of Fosroc make or make as approved by GE, pre-packed single component, chloride free, sulphate free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion of approved quality. Formwork shall be provided for placing micro concrete patch repair as required at site with steel jack system and steel props to support the form work in this application of high strength, dual shrinkage, compensated, micro concrete for placing in nominal thickness of more than 50mm for concrete repair with compresive strength of 40 Mpa at 28 days complete Note: The qouted rate deemed to be included for formwork / shuttering, if any required.
M&L for two coat of white wash on surfaces of ceiling and wall of new / old surface of gallaries including surface preparation complete all as specified and directed.
M&L for chipping & removal of existing damaged, cracked, spalled & loose portion of concrete of the RCC members completely till the reinforcement is exposed and sound concrete (20mm to 50mm) is observed by using mechanical means and manual chisels and further the surface is jetted with clean water for removal of dust and loose particles and complete all as specified and directed.
M&L for removing and cleaning of existing peeled off portions of RCC walls / columns / ceilings of galleries, sea side facia walls, cope point chambers etc. including chipping, wire brushing and making good the corroded / rusted reinforcement with new reinforcement for binding reinforcement as required to existing reinforcement by welding / tying with mild steel wire (annealed) not less than 0.9 mm dia and gunniting the area with minimum pressure of 5 Kg/cm2 to an average thickness of 40 mm in CM (1:2) and finish the surfaces fair and even complete Note:- Supply only reinforcement and welded wire fabric will be measured and paid separately.
M&L for preparation of exposed surafces of rusted steel reinforcement of dia 10mm and above with metal wire brush, cleaning the rusted surfaces free from loose rust and application of rust remover cum passivator painted with brush to the rusted reinforcemnet @ 2.0-2.5Ltr /Sqm surface of steel reinforcement, (Fosroc-Reebaklens RR or make approved by GE) to the surface of existing reinforcement) and removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper and throughly washed with water with the help of pressure jet and allowing it to dry complete. (Length of reinforcement steel bar shall be measured for payment complete)
Supply only welded steel wire fabric fixed to RCC wall/ceiling with necessary fixing arrangement weight exc 2 kg/sqm butt not exc 4 Kg/Sqm complete all as specified and directed.
Material & labour for providing Shear connectors and Anchoring by drilling 12 mm dia holes up to depth of 100mm in concrete surfaces and fixing 10 mm dia TMT bars L shaped anchor rods as shear connectors by using Lokfix chemical manufactured by Fosroc or equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASF or any other approved manufacturer of E-in-C's branch (Mix of base and hardener of the polyester resin) in defective concrete area of the slab / column / beams / chajjas / lintel etc or any other structural member as per site requirement after cleaning the drilled
hole by using water jet and after drying clean the surface with blower to remove all loose & fine particles present in the hole. The Mix of base and hardener of the polyester resin shall be prepared by thorough mixing of base & hardener by the help of spatula. After preparing the mix the holes shall be filled to a minimum depth of 1/3rd of the hole with the prepared polyester resin and the reinforced bar shall be inserted to full depth of hole and extra length of the reinforcement bar shall be bent into the concrete to maintain proper cover to the reinforcement complete all as specified and directed.
S A R CONSTRUCTIONS
TANEESH CONSTRUCTIONS
UNITY PROJEKTZ
venkata sai constructions
SPAAN Infratech
GVR CONSTRUCTIONS
SRI SIMHADRI COMPANY
SREE HANUMAN ENTERPRISES
CIVILEC ENGINEERING WORKS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .