Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹37.1 L+₹11,375.31 (0.31%)Rejected-AOC | L2 | Rejected-AOC High |
| Sl No | Description | Qty | Unit | MOHAMMED MUSTHAFA V L2 | MANAF V L1 |
|---|---|---|---|---|---|
| 1.00Providing Ring bund & Bailing out water | |||||
| 1.00 | OD19642/2024-2025:Putting up ring bund of top width 1.50m, bottom width 2.75m.and average height of 2.50m
with 1:1/4 side slope and protect the sides with coconut post of 4.50m long driving down
2.00m below bed level at 75cm c/c, providing 3 rows of weiling pieces 1/4 split coconut post
on both sides and 1/4 split cross ties to alternate posts at top, bottom and middle portion
and screening the sides of bund with Seperation memebrane of impermeable plastic sheet
125 micron thick fixed properly using coconut post and weiling pieces using reeper and nails
in full height including tying properly using iron wire and coir altogether and supply and
filling inside with hard clay/cut earth up to 2.50m, levell and conveyed with all leads and
lifts including consolidating properly and maintaing the bund till the work is completed and
dismantling the bund after completion of work etc. as per the directions of departmental
officers at site.(As per approved data GO (RT) NO.6544/2021/FIN Dtd.06/10/21) Item No.5.3) | 30.61 | metre | 4,989 ₹1,52,738.24 | 4,988.99 ₹1,52,737.93 Lowest |
| 1.00 | OD10014/2024-2025:Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete | 150 | hour | 557 ₹83,550 | 556.52 ₹83,478 Lowest |
| 2.00Supply, Fabrication and erection of M S and S S embedded parts for shutters | |||||
| 2.00 | OD10754/2024-2025:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges | 359.22 | kg | 103 ₹36,999.25 | 102.81 ₹36,931 Lowest |
| 2.00 | OD7640/2025-2026:Supply of MS round bar including cost of conveyance charges | 125.14 | kg | 91 ₹11,387.38 | 90.48 ₹11,322.31 Lowest |
| 2.00 | OD31333/2024-2025:Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied | 484.35 | kg | 93 ₹45,044.74 | 92.73 ₹44,913.96 Lowest |
| 2.00 | OD31318/2024-2025:Fabrication,Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,seal seat etc as per approved specifications,drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete | 1,347.36 | kg | 589 ₹7,93,595.04 Lowest | 589.98 ₹7,94,915.45 |
| 3.00Demolition and Re-concreting Works | |||||
| 3.00 | 15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. | 3.62 | cum | 3,958 ₹14,308.17 | 3,957.93 ₹14,307.92 Lowest |
Tender Value
₹34.3 L
EMD Value
₹50,000
Closing Date
19 Mar 2026, 2:00 pmClosed
EXECUTIVE ENGINEER
Mechanical Division,Irrigation 2ndFloor,Mini Civil Station, Thathampally P.O.Alappuzha Pin-688013
GENERAL-PULLENCHIRA-Pullenchira Shutter modernization General Mechanical Work
2026_Irrig_846742_1
IRR/MH/TR/4943/2024_16_1_1/1
Open Tender
Miscellaneous Works
Item Rate
365 days
Pullanchira Vayalar
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,760
₹50,000
31 Jul 2026
12 Mar 2026
23 Mar 2026
12 Mar 2026
19 Mar 2026
12 Mar 2026
12 Mar 2026 - 19 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing Ring bund & Bailing out water | |||||
| 1.001 | OD19642/2024-2025:Putting up ring bund of top width 1.50m, bottom width 2.75m.and average height of 2.50m
with 1:1/4 side slope and protect the sides with coconut post of 4.50m long driving down
2.00m below bed level at 75cm c/c, providing 3 rows of weiling pieces 1/4 split coconut post
on both sides and 1/4 split cross ties to alternate posts at top, bottom and middle portion
and screening the sides of bund with Seperation memebrane of impermeable plastic sheet
125 micron thick fixed properly using coconut post and weiling pieces using reeper and nails
in full height including tying properly using iron wire and coir altogether and supply and
filling inside with hard clay/cut earth up to 2.50m, levell and conveyed with all leads and
lifts including consolidating properly and maintaing the bund till the work is completed and
dismantling the bund after completion of work etc. as per the directions of departmental
officers at site.(As per approved data GO (RT) NO.6544/2021/FIN Dtd.06/10/21) Item No.5.3) | 1 | metre | - | - |
| 1.002 | OD10014/2024-2025:Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete | - | hour | - | - |
| 2Supply, Fabrication and erection of M S and S S embedded parts for shutters | |||||
| 2.001 | OD10754/2024-2025:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges | 0.4 | kg | - | - |
| 2.002 | OD7640/2025-2026:Supply of MS round bar including cost of conveyance charges | 0.4 | kg | - | - |
| 2.003 | OD31333/2024-2025:Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied | 0.8 | kg | - | - |
| 2.004 | OD31318/2024-2025:Fabrication,Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,seal seat etc as per approved specifications,drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete | 1 | kg | - | - |
| 3Demolition and Re-concreting Works | |||||
| 3.001 | 15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. | - | cum | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1430702.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.06 MB
sbd.pdf
Tender Documents • 1.87 MB
BOQ_1430702.xls
BOQ • 0.33 MB
DATEDCORRGENDUM5.pdf
PDF • 0.25 MB
Corrigendum4.pdf
PDF • 0.19 MB
DATEDCORRGENDUM3.pdf
PDF • 0.27 MB
corrigendum2.pdf
PDF • 0.32 MB
dtdcorrig.pdf
PDF • 0.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .