PROVISION OF MARRIED ACCOMMODATION FOR CGDHQ-1 AND UNIT BASED AT PORBANDAR

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( EARTH WORK AND SITE CLEARENCE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III ( DEMOLITION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -X (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

INTERNAL WATER SUPPLY S & F 15 mm Two way bib tap complete all as specified & directed.

INTERNAL ELECTRIC SUPPLY S & F modular type bell ding dong of 2 module size, conforming to IS: 8884- 1978 complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 43 or equivalent model of ABB (snieo) / L&T (Entice) / Wipro

S & F modular type 1 module TV socket complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 25 or equivalent model of Precision

S & F modular type 1 module RJ 11 telephone socket with shutter complete all as specified and directed. Make: Legrand Arteor Cart-Part No. 5734 26 or equivalent model of ABB 211 / Anchor Panasonic (roma)

S&F rigid non-metallic 20mm PVC conduit including junction boxes (junction terminal) tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.-

S & F 20 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: BAJAJ Cat-Part No. 112785 BCLAB 20W or equivalent model of Havells, Philips or Wipro

S & F 10 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: Bajaj Cat part No: 112407 BCLSB 10WH or equivalent model of Havells, Philips or Wipro

S & F 20 W LED building security light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 100 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 65 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket 1.5 m long with including necessary electrical connection to the fixture with 3 core flexible Copper conductor cable of appropriate size and light grade GI pipe, 20 mm including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed. Make: BAJAJ Cat-Part No. BAJAJ 169829 BCLST 20W LED I or equivalent model of Havells, Philips or Wipro

S & F BLDC energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make: Crompton Cat-Part No. ENTRUST50 or Havells Cat- Part No. ES-50 or equivalent model of Usha or BAJAJ

S & F energy efficient non-metalic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton, Havells, Usha

S & F energy efficient metalic exhaust fan having blade sweep 300 mm, air delivery not less than 900 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. TRANS AIR 12" or equivalent model of Usha, Havells or BAJAJ

S & F moulded case circuit breaker (MCCB) in single frame size up to 250 A with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 1.5- 10 X Ir), inbuilt encapsulated double break roto active type instanteneous protection, earth fault leakage protection, etc. having Ics = 100% Icu as per IEC 60947-2 complete all as specified and directed by engineer-in-charge. 63 A, Ics = Icu = 16 kA, 415 V, 50 Hz FP MCCB Make: Legrand Cat-Part No. 4200 13 equivalent model of L & T or Schneider.

S & F MCB for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified and directed by engineer-in-charge. Make: Schneider, Legrand, Havells (a) 6 A, SP MCB, C- curve

(b) 16 A, SP MCB, C- curve

(c) 16 A, DP MCB, C- curve

(d) 32 A, SP MCB, C- curve

M & L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised Iron strip of 32 X 6 mm as earth lead, by means of bolts, Nuts, check nuts and washers of galvanised iron or steel, galvanized iron pipe medium grade of 40 mm diameter upto 7.5m long, connected to earthing test point, all as shown in electrical plate No. 3 of SSR part 1 2009 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. as all specified and directed. NOTE : Item includes the cost of 7.5m GI pipe for protection of earth lead & any addition in length shall be adjusted through deviation order.

Supply, installation and commissioning of 25 Litre electric geyser having temperature sensitive LED indicators, shock safe plug, PUF insulation, incoloy glass coated heating element, anode rod, adjustable knob, multi-functional safety valve with all complete as specified and directed. Make: Havells Cat-Part No. GHWAPTTIV025 or equivalent model of Racold, AO Smith

S&F Modular Power units 20 Amp, with power socket & SP MCB 20Amp, complete all as specified and as directed. Make: Legrand/ Havells/ Anchor

EXTERNAL WATER SUPPLY Supply, laying and jointing in trenches DI pipes class K7 of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement mortar coating an external surface with bituminious paint of size 100 mm dia ISI all as specified and directed. Make: Electrosteel/ Jindal Saw/ TATA

Material and labour for ISI marked ductile iron flange fittings supplied as per IS: 9525/2000 of class K-12, PN-10 with inside Cement Mortar lining and outside zinc followed by black bitumen coating for size 100mm dia to 200mm such as bends, tapers tale pieces, Tee pieces (single branch) Y junction double branch, cross collars, caps and plug set including rubber ring push on joints complete as specified and directed

EXTERNAL ELECTRIFICATION Supply and lay double wall corrugated (DWC) high density polythene pipes OD 90 MM dia having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of cable with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini

Taking out of electric connection amd dismantling of existing outlived Panel complete all as specified and as directed

Taking out of electric connection and dismantling of existing cable of size 16/ 25 Sqmm 3.5 Core complete all as specifed and as directed

M& L for LT panel Board cubical KIOSK indoor type compact 415 Volts AC 50 HZ 4 wire , fabricated Polycarbonate, nominal size 980 mm x 955 mm x 250 mm RAL-7035 finish confirming to IP-65 complete including copper bus bar 200 Amps 30 KA 4 strip mounted on porcelain insulated and enclosed in chamber, bottom cable entry comprising of the following items:- (a) Incoming MCCB 63 Amp Four Pole Breaking Capacity 36 KA Microprocessor type with rotary handle -01 No (b) Outgoing MCB DP 40 Amp 230 Volt C series 10 KA -06 Nos (C) Digital multifunctional Panel Meter for Amp Volt, KWH Power factor and other parameters flush mounting of size 96 X 96 mm all as specified and as directed. (d) Single Phase (10.30 Amps) energy meter of accuracy class 1.0 240 Volt 50 Hz with backlit LCD Optical Port Display of 10.30 Amp (measures KWH , KVAH, V.IPF Frequency. KW Six month history of enerfy & MD in KW & KVA and Anti temper feature and load profile-06 Nos. (e) Indicating Lamp Led type RYB Set 01 Nos. Make of MCCB & MCB : Legrand/Schneider/L&T Make of Panel Hansel / Neptune/ Schneider Make of Energy Meter L&T /HPL/SECURE Note (i) : The meter Box should have test certificate in accordance with IEC 60670-22, IEC n60 439-1 (IS 8623) CPRI ASTA and Party should submit copy of all test certificate.

M & L for LT panel Board cubical KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, Nominal Size 1100mmX1950mmX660mm, RAL 7035 finish confirming to IP 55 complete including Copper bus bar 400 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following :- (a) Copper bus bar RYB & N of 400 Amp capacity -01 set (b) MCCB 160 amps 4 pole ultimate breaking capacity 36 KA with electronic releases suitable for 415V complete all as specified- 01 No (c) MCCB 100 amps 4 pole ultimate breaking capacity 25 KA with electronic releases suitable for 415V complete all as specified- 04 No (d ) Digital Multifunctional Panel meter of size 96X96 mm and three current transformer of suitable ratio and capacity -01 No (e) Platform for the feeder pillar board with PCC 1:2:4, type B1 using 20 mm graded stone aggregate 15 cm thick on foundation in CM 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in padding on top and grouting Makes: HENSEL/NEPTUNE/UNIVERSAL

m/s.a.t.odedra

M/s SK Traders

JAMNAGAR ELECTRIC AND MACHINERY CO