CONSTRUCTION OF NEW 33 KV FEEDER EMANATING FROM UNDER CONSTRUCTION 132 KV PRIMARY SUBSTATION OEL, LAKHIMPUR KHERI TO 33/11 KV SUBSTATION OEL, DISTRICT-LAKHIMPUR KHERI

Amount

Carriage of following line materials for 33KV line from Store Centre Lakhimpur to the site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site. (Distance upto 15 km)

ST Pole 11 Mt Long-SP-55

11 KV Disc Insulator B&S. Type 7000 Kg.

Disc Fittings Dog/ Racoon 7000 Kg

33KV Pin Insulator

33KV Pin with Nut

M.S. Angle Iron 65x65x6mm, 4300 mm long 2/6/8 no. Bracing, with 4/12/16 clamps (5.8 kg./m)

M.S. Angle Iron 65x65x6, 3200mm long, 5.8 Kg/Mtr. for cable with clamp

Top chanel 125X65mm, 3200 mm long (13.10 Kg./m) with clamp

MS chanel 125X65mm, (3200+2000mm) long (13.10 Kg./m) for Cable Exposer DP with clamp

MS. Channel 100X50 mm (9.6 Kg/mtr.) for Cable Stand

MS Angle 75x75x6mm (6.8 KG/mtr) for Cable Stand

Earthing of pole by MS earthing rod 20x2500 mm and 6 SWG earthing/GI wire etc

Single core PVC Cable 1x400

Complete Stay (GI Stay rod 20x1800 mm, Stay 7/8 SWG 10 Kg.)

ACSR Dog Conductor (0.3x3+3%= 0.9 Km.)

33 KV XLPE Cable 3x300 sq.mm.

33 KV XLPE C/J/Kit (Outdoor) of size 3x300 sq.mm

33 KV XLPE C/J/Kit (S/Th) of size 3x300 sq.mm

33 KV Line Isolator

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All type of clamps nut & bolt, washer would be provided by contractor.

Double pole Cable Exposure structure on S.T. Pole 11mtr long complete with angle.

End Double Pole structure on S.T. Pole 11mtr long complete with bracing and angle .

Erection/fixing for stay set with stay wire and clamp as per RESSPO drawing including binding, clambing, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete blast and etc would be provided by contractor.

Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement ,brick ballast and sand in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Laying and sagging of 3 phase ACSR Dog conductor from Double pole upto the gantry at 132KV substation / 33KV substation including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc. in all respect.

Earthing of each S.T Poles of the line is to be done by driving the MS earthing rod 2500x20mm below 0.5 Mtr. In the ground and properly connected to each support with G.S Flat 35x5mm by electric welding process with M.S earthing rod. Earthing plate welding point with support must be 0.15Mtr.above from the plinth of the support,Earthing of each section pole is also to be done. All type of nut & bot would be given by the contractor.

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of job.

Double pole Cable Exposure structure on S.T. Pole 11mtr long complete with bracing.

End Double Pole structure on S.T. Pole 11mtr long complete with bracing.

Fixing of danger board on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items.

Laying of 33 KV 3x300 sq.mm., XLPE cable (single circuit) by digging method depth minimum 1.2 mtr below ground level and 45mm wide by excavation of earth. The work include supplying of fine sand, bricks, stone slab, refilling and remming of the left out soil and levelling etc. (All the materials except 33 KV XLPE Cable will be supplied by the contractor).

Drilling and laying of 33 KV underground cable using HDD method without using HDPE pipe, single circuit, below minimum 1.5 mtr depth from ground level. (All the materials except 33 KV XLPE Cable will be supplied by the contractor).

Laying of 3x300sqmm 33 KV, XLPE insulated cable underground in HDPE pipe (Pipe to be laid by HDD method), single circuit.below 1.5 mtr depth from ground level minimum. (All the materials except 33 KV XLPE Cable will be supplied by the contractor).

Laying of 3x300sqmm 33 KV, XLPE insulated cable at open space (above ground) in M.S./G.I./HDPE pipe with clamp.

Fixing of cable marker on the route of 33 KV underground cable at the interval of 150 mtr. having each dipitching feeder name and voltage on cable marker. (all the material associated with this job shall be supplied by the contractor).

Hoisting of 33 KV 3x300sqmm XLPE (Double Circuit) cable on erected double pole including GI Pipe 3 mtr. long 150 mm dia. including jumpering, bracing of cable with required necessary angle, clamps & nut bolts etc.(All the material associated with this job shall be supplied by the contractor).

Fabrication, Erection, Painting, Grouting of cable support stand with two pieces of MS channel 100x50mm, 3.0 mtr. long joined to each other by means of 100x50 mm Channel piece and supporting/holding of 33 KV cable with clamp with nut & bolts. (All the material associated with this job shall be supplied by the contractor).

Isolator Structure: fabrication, Erection,Grouting and Painting of Isolator Structure of 3.5 mtr in height as per Drg.No.RES-39, digging of two no. pits of size 1.075x0.9x0.3 mtr. providing Stone Pad at the bottom of the pit and grouting of two legs of the isolator structure in CC(cement coarse sand and stone grit of 20mm gauge) of the ratio 1:4:8 in block of 1.075x0.3 mtr. including all civil material, T&P complete in all respect. (All the material associated with this job shall be supplied by the contractor).

Installation of Isolators: Assembling and installation of line/ bus isolator on the isolator structure adjusting of opening mechanism in proper alignment so as to ensure smooth operation of the same. The work includes fabrication for proper fixing if required. (All the material associated with this job shall be supplied by the contractor).

Making of 33 KV Straight Throuh cable jointing terminations at joints at inspection window and at both ends. 33 kv O/D &S/Through cable boxes would be provided by the department.

Making of 33 KV Outdoor cable jointing terminations at joints at inspection window and at both ends. 33 kv O/D &S/Through cable boxes would be provided by the department.

Electrical Safety Department NOC charges documentation and approval fee etc.

A. A. ENGINEERING CO.

NATIONAL CONTRACTOR & GENERAL ORDER SUPPLIER

Bigbob Multi Services Pvt. Ltd.

RAJ ENTERPRISES