Construction of Toilet block near Auditorium Building

Amount

Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) /manual means in over areas ( exceeding 30 cm in depth, 1.50m in width as well as 10 Sq.m on plan ) including disposal of excavated earth, lead upto 50m and lift upto 3.00m, disposed earth to be levelled and neatly dressed as per instruction of Engineer-in-charge.

Earth work in excavation in all kinds of soil.by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.in layers not exceeding 20cm in depth, consolidating each deposited layers by ramming and watering lead upto 1Km and lift upto 1.5m etc. complete.including conveying the earth upto 1KM

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor with Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) grade excluding the cost of centering and shuttering - All work up to plinth level

Providing and laying in position cement concrete of grade 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level

Providing and laying cement concrete of grade 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

Providing and laying in position reinforced cement concrete of 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) grade, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level

Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work in Thermo-Mechanically Treated bars of grade Fe-500D or more.including straightening, cutting, bending, placing in position and binding all complete upto plinth leve

Laterite masonary in cement mortar 1:6 (1 cement : 6 coarse sand) in foundation and plinth using neatly dressed laterite stones including cost and conveyance of all materials and labour charges etc, complete

Laterite masonary in cement mortar 1:6 (1 cement : 6 coarse sand) in superstructure above plinth level up to floor V level using neatly dressed laterite stones including cost and conveyance of all materials and labour charges etc, complete

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement :4 coarse sand) in superstructure above plinth level up to floor V level.

Random rubble masonry with hard stone in cement mortar 1:6 (1 cement : 6 coarse sand) in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with

Providing and fixing 18 mm thick Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble (Area of slab over 0.50 sqm) gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. fixed to steel windows by welding including priming coat with approved steel primer all complete.

Providing and fixing IS : 12817 marked stainless steel butt hinges of size 125x64x1.90 mmwith stainless steel screws etc. complete :

Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100X58X1.90 mm with stainless steel screws etc. complete :

Providing and fixing 300mm x 16mm C.P steel aldrop with necessary fittings (best approved quality) including cost and conveyance of all materials and labour charges etc. complete.

Supplying best approved quality 6 lever (50mm or nearest size) pad lock (Navital) including cost and conveyance of all materials and labour charges etc. complete.

Providing and fixing IS : 3564 aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing 100x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing factory made uPVC door frame made of uPVC extruded sections profile size 42x50 mmhaving an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer specification and direction of Engineer- in-charge

Providing and fixing 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of H section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. U cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufactur

Steel work in built up GI tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and laying rectified Antiskid Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing GI powder coated trafford sheets 0.50mm or nearest available thick with GI bolts and nuts plate washers and bitumin washers, M seal and 150mm overlap at ends including cost and conveyance of all materials and labour charges etc.complete

Providing hip or valleys of 90 cm wide overall in powder coated aluminium sheet 0.6mm or nearest fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete

Providing 150mm or nearest available size PVC gutter with necessary clamps, bolts, nuts and specials such as nozzles sockets stoppers etc. including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers

Plastering with C.M. 1:4 (one cement four sand), 12mm thick for walls inside and outside with necessary scaffolding and thread lines, including cost and conveyance of all materials and labour charges etc. complete.

12mm cement plaster 1:3 (one cement: three coarse sand) finished with a floating coat of neat cement including cost and conveyance of all materials and labour charges etc. complete.

Pointing (flush/ruled pointing) on stone work with cement mortar 1:3 (1 cement: 3 fine sand) including cost and conveyance of all materials and labour charges etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Finishing walls with two or more coat Acrylic Smooth exterior paint of required shade in New work (applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting with two or more coats synthetic enamel paint on new work of approved brand and manufacture to give an even shade :

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with two coat premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour

Finishing walls with old work (One or more coat applied @ 0.90 ltr/10 sqm) Acrylic Smooth exterior paint of required shade :

Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Demolishing stone rubble in cement mortarmasonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Dismantling doors, windows and clerestory windows (steel or wood) shutter Of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking serviceable material in Engineering Unit store and other materials within 50 metres lead as per the instructions of Engineer-in-Charge

Dismantling tile work in floors and roofs ( thickness of tiles 10 mm to 25 mm) laid in cement mortar including stacking serviceable material in Engineering Unit store and other materials within 50 metres lead as per the instructions of Engineer-in-Charge

Dismantling PVC, C.I. or asbestos pipe 75 to 80 mm dia with fittings and clamps including stacking the material within 50 metres lead

Dismantling PVC, C.I. or asbestos pipe 100 mm dia pipe with fittings and clamps including stacking the servicable material in the Engineering Unit store

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismatling and removing and carefully stacking water closet including removal of foot rest trap etc. complete as per the instruction of Engineer-in-charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

Providing and fixing White Vitreous china Orissa pattern water closet pan of size 580x440 mm with integral type foot rests squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required

Providing and fixing White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required

Providing and fixing white vitreous china flat back lipped front urinal of size 430x350x265mm with PVC waste line 32mm dia, 15mm nylon connection with brass union with cost and conveyance of all materials and labour charges etc. complete.

Providing and fixing 110 mm steel gratings (door type) including cost and conveyance of all materials and labour charges etc. complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Supplying and fixing 600mm x 20mm brass towel rail and fixing to wall with wooden plug with CP brass screws including cost and conveyance of all materials and labour charges etc. complete.

Providing and fixing 20 mm PVC pipes (0.75") (10kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing 25 mm PVC pipes (1") (10kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing 32 mm PVC pipes (1.25") (10kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing 40 mm PVC pipes (1.5") (10kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing 63 mm PVC pipes (2.25")(4kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing 90 mm nominal outer dia PVC pipes (3") (4kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing 110mm (4") PVC pipe (4kg/cm2) best quality Polyvinyl Chloride (CPVC) pipes, including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) :

Providing and fixing 32 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) :

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 :

Providing and fixing 15 mm nominal bore C.P. brass push cock of approved quality conforming to IS:8931 :

Providing and fixing best quality C.P. brass health fauset (Cascade) etc. complete

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Providing and fixing SS soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for fixed portion of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)(Glazing, paneling and das

Providing and fixing 4mm or nearest thick Aluminium composite panel (ACP) board in paneling fixed in aluminium doors, windows shutters and partitions frames with CP. brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Providing and fixing glazing with float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)

kp mohankumar