Loading
Loading…
Loading…
Tender Value
₹14.5 L
EMD Value
₹36,318
Closing Date
5 Oct 2026, 5:00 pm7d left
ASSISTANT ENGINEER
KURUMATHUR GP
Annual Plan-KURUMATHUR GP - PRO.NO.179/26-27-MAINTENANCE OF VARIOUS BUILDINGS OF MINI INDUSTRIAL ESTATE -General Civil Work
2026_LSGD_872945_10
AE/KMTR/TN/4/2026-27
Open Tender
Civil Works - Buildings
Item Rate
180 days
KURUMATHUR GP
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,760
Yes
₹36,318
Yes
26 Sept 2026
26 Sept 2026
7 Oct 2026
26 Sept 2026
5 Oct 2026
26 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1MAINTENACE WORKS | |||||
| 1.001 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 0.48 | cum | - | - |
| 1.002 | 15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos cement Sheet | 720.28 | sqm | - | - |
| 1.003 | 15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | 625.68 | kg | - | - |
| 1.004 | 15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 15.18 | sqm | - | - |
| 1.005 | OD182152/2026-2027:Laterite neatly dressed stones of size 35x20x20 cm or nearezt size in cement mortar 1:6 for superstructure above plinth level up to floor two level including cost of materials labour charges etc. complete. (Modified 50.6.7.2) | 6.77 | cum | - | - |
| 1.006 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,796.69 | kg | - | - |
| 1.007 | OD181714/2026-2027:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)
0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches
during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch
in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size
and shape wherever required. (MOD 12.50 of DSR ) | 743.72 | sqm | - | - |
| 1.008 | OD181713/2026-2027:Providing and fixing Alu zinc roof sheet 0.40 mm (+ 0.05%) using self drilling/self tapping
screws complete:Ridges plain (500-600 mm) (Modified data 12.51.1 DAR) | 77.45 | metre | - | - |
| 1.009 | OD185702/2026-2027:Steel work for purlin/single section with Departmental G I pipes including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete | 119.04 | kg | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
viewsbd.pdf
Tender Documents • 1.75 MB
BOQ_1480858.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .