MAINTENANCE, REPAIRS OF ROOF MOUNTED EXHAUST BLOWERS, CEILING FANS, EXHAUST FANS, WALL FANS, PEDESTAL FANS, CEILING FANS IN WORKSHOP BUILDINGS IN NAVAL DOCKYARD, VISAKHAPATNAM UNDER GE (I) DM VISAKHAPATNAM.

Amount

M&L for dismantling & taking out ceiling fan of any sweep from its position ceiling mounting hook rewinding of ceiling fan 1200 mm/ 1400 mm sweep after opening complete motor assy, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/turn of super enamelled copper wire, heating, vernishing, bushings connector block, connection wire 3 core, assemble of rotor and stator unit with capacitor, connecting wire, capacitor pad, down rod, blades complete all as specified and directed. Note: Transportation from building to complaint cell and further transportaion to civil workshop outside ND (V) for rewinding and bring back after repair (if required) is inclusive of rate

All as per item No. 1.00 above, but for wall fan / table fan / padastal fan / exhaust fan/aircirulator fan of 300/380/400 mm sweep

All as per item No. 1.00 above, but for wall fan / padestal fan / exhaust fan /aircirulator fan 450 mm sweep Normal / flame proof type

All as per item No. 1.00 above, but for heavy duty exhaust fan/padastal fan/aircirulator fan 600 mm sweep

M&L for servicing of ceiling fan 1200 / 1400 mm sweep in situ after dismanting taking down from ceiling mounting hook, complete cleaning of fan, greasing/oiling of bearing / bushings, replacement bushings, connection wire, tightening of nuts, bolts, washers, and refixing to original position with required new rubber bushings / mounting bolts and necessary accessories complete all as specified and directed.

M&L for servicing of exhaust fan heavy duty 300/380/400/450 mm sweep normal / flame proof type in situ after dismanting taking down from its mounting position on wall at height 3 M to 9 M from floor, complete cleaning of fan, greasing/oiling of bearing and bushings, replacement of unsv , connection wires, tightening of nuts, bolts, washers, Checking for serviceability of all mounting brackets, foundation bolts and refixing to original position with required new rubber bushings / mounting bolts and necessary accessories complete all as specified and directed.

All as per item No. 6.00 above, but for heavy duty exhaust fan 600 mm sweep

M&L for servicing of air circulator/pedastal fan heavy duty 300/400/450/600 mm sweep in situ after dismanting taking down from its mounting position on wall / steel or RCC column at height upto 3M for FL, complete cleaning of fan, greasing/oiling of bearing and bushings, replacement of unsv connection wires, regulator, oscilating mecanism, tightening of nuts, bolts, washers, Checking for serviceability of all mounting brackets, foundation bolts, protection grills and refixing to original position with required new rubber bushings / mounting bolts complete all as specified and directed.

M&L for fan outer covers (top & bottom) suitable for 1200/1400 mm ceiling fan, heavy duty, synthetic paint coating alongwith spindle & nut /bolts complete all as specified & directed.

M&L for Bottom & top canopy suitable for 1200/1400 mm ceiling fan, alongwith Cotter pin & rubber shackle complete all as specified & directed.

M&L for ceiling fan copper winding core, single phase, speed min 400 RPM suitable for 1200/1400 mm ceiling fan, complete all as specified and directed.

S&F down rod of ceiling fans 61cm to 91cm long including nuts, bolts, washers after dismantling taking down old one all as specified and directed.

M&L for exhaust fan outer covers (Front & Rear) suitable for 300/450 mm exhaust fan, heavy duty, synthetic paint coating complete all as specified and directed.

M&L for Rotar with shaft suitable for 300/450 mm exhaust fan, heavy duty, complete all as specified and directed.

M&L for exhaust fan copper winding core, single phase, speed min 1400 RPM suitable for suitable for 300/450 mm exhaust fan, complete all as specified and directed.

M&L for Air circulator/Pedastal outer covers (Front & Rear) suitable for 300/450 mm , heavy duty, synthetic paint coating complete all as specified and directed.

M&L for Rotar with shaft suitable for for 300/450 mm Air circulator/Pedastal, heavy duty, complete all as specified & directed.

M&L for Air circulator/Pedastal copper winding core, single phase, speed min 1440 RPM suitable for suitable for 300/450 mm Air circulator/Pedastal, complete all as specified & directed.

M&L for Air circulator/Pedastal outer covers (Front & Rear) suitable for 600 mm , heavy duty, synthetic paint coating complete all as specified and directed.

M&L for Rotar with shaft suitable for 600 mm Air circulator/Pedastal, heavy duty, complete all as specified & directed.

M&L for Air circulator/Pedastal copper winding core, single phase, speed min 1440 RPM suitable for suitable for 600 mm Air circulator/Pedastal , complete all as specified & directed.

M&L for painting of ceiling fan 1200 / 1400 MM sweep incl blade, canopy, down rod with one coat of synthetic enamel paint white colour including taking down & refixing to original position complete all as specified and directed.

M&L for painting of heavy duty exhaust fan/wall fan 300 / 400 / 450/600mm sweep incl blade and frame with one coat of synthetic enamel paint smoke grey colour including taking down & refixing to original position complete all as specified and directed.

M&L for painting of heavy duty Air circulator / padastal fan 300/ 400 / 450 / 600 mm sweep incl blade, frame & stand with one coat of synthetic enamel paint smoke grey colour including taking down & refixing to original position complete all as specified and directed.

S&F Front & rear grill of air circulator and padastal fans for 400/450mm sweep includign dismantling taking out old one all as specified and directed. Make :- Almonard or equivalent in Orient

S&F Front & rear grill of air circulator and padastal fans for 600 mm sweep including dismantling taking out old one all as specified and directed. Make-Almonard or equivalent in Orient

Supply & fixing ball bearing 6200 / 6201 / 6202 / 6203 / 6204 suitable for ceiling fan & exhaust/wall/aircirculator fan 300/400 /450/600 mm sweep complete all as specified and directed.

Supply & fixing only capacitor 2.5 mfd for ceiling fan and air circulator upto 450mm sweep complete all as specified and directed.

Supply & fixing only capacitor 4 mfd for 600 mm aircirculator fan and 450mm exhaust fan all as specified and directed.

Supply & fixing only capacitor 10 mfd for 600 mm exhaust fan/blower all as specified and directed.

S&F all in one solar light fittings 60 watts, Aerodynamic design having 140/150Lumen/watt mono type compact & fully intigrated designed rust proof Al housing, LED DC driver, PIR Type sensor, 600K, IP 66 complete with all fixing arrangements or as specified & directed. Make :-Crompton/ Bajaj/Havells

Supply & fixing set of fan blade(3 Qty) for ceiling fan of size 1200/1400mm size with bolts,clamps and necessary accessories as per the existing make including taking down & refixing to original position complete all as specified and directed..

S&F mild steel alloy D-hook with 2 Nos M10x75mm expansion fasteners hanger (heavy duty) fixed to ceiling for proper hanging of ceiling fan and making good disturbed surfaces to match with the existing one including taking down & refixing to original position complete all as specified and directed.

Supply & fixing set of fan blade(3 Qty) for exhaust fan of size 300/450mm size with bolts,clamps and necessary accessories as per the existing make including taking down & refixing to original position complete all as specified and directed..

Supply & fixing set of fan blade(3 Qty) for air circulator fan/pedestal fan of size 450mm size with bolts,clamps and necessary accessories as per the existing make complete all specified and directed.

Supply & fixing set of fan blade(3 Qty) for air circulator fan/pedestal fan of size 600mm size with bolts,clamps and necessary accessories as per the existing make including taking down & refixing to original position complete all as specified and directed.

Supply & fixing fan stand for pedestal fan of size 450mm size with bolts,clamps and necessary accessories as per the existing make including taking down & refixing to original position complete all as specified and directed.

Supply & fixing fan stand for pedestal fan of size 600mm size with bolts,clamps and necessary accessories as per the existing make includingh taking down & refixing to original position complete all as specified and directed.

ADITYA ENTERPRISES (BID ID -3132996)

M/S SRI VENKATA BHAVANI CONSTRUCTIONS (BID ID -3130860)

M/s SAI GANESH ENGINEERING ENTERPRISES (BID ID -3132975)

aswitha engineering works (BID ID -3133155)

SRI SIMHADRI COMPANY (BID ID -3132940)

M/s.Raghava Enterprises (BID ID -3133150)