AUGMENTATION OF VARIOUS WSS VILLAGES IN GP LOT JAHAL AND KANDI KAMRUNAG

Amount

Cutting in earth work and disposal of excavated earth upto a lead of 20 metres in pick work 50% and jumper work 50% in all leads and lifts.

Excavation in foundation and trenches etc. in earth work in all kind of soil such as pick work jumper work,saturated soil including bailing or pumping out water, blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring strutting,timbering and dewatering where ever required as per the direction of the Engineer-in-Charge.

Providing and laying cement concrete 1: 6 : 12 (1 Cement : 6 Sand :12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts.

Providing and laying cement concrete 1: 3 : 6 (1Cement : 3 Sand : 6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts.

Providing and laying cement concrete 1: 2 : 4 (1Cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in :-( M-30)

Foundations ,footings,bases of columns and the like & mass concrete in all leads and lifts as per the direction of Engineer-in-Charge.

In foundation and plinth with in all leads and lifts.

Suspended floors ,roofs,landings and shelves and their supports,balconies,beams, girders, bressumers and cantilevers upto floor two level in all leads and lifts.

Providing and laying cement concrete work in M-30 grade but not leaner than nominal mix 1:1:2 (1Cement : 1 Sand : 2 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in:

Foundations and plinth with in all leads and lifts as per the direction of Engineer-in-Charge.

Wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level with in all leads and lifts.

Providing and laying cement concrete work 1 : 1½ : 3 (1Cement : 1½ Sand : 3 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in:

Foundations ,footings,bases of columns and the like & mass concrete in all leads and lifts as per the direction of Engineer-in-Charge.

Foundations and plinth with in all leads and lifts as per the direction of Engineer-in-Charge.

Wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level with in all leads and lifts.

Suspended floor roofs landing shelves and therir supports with in all leads and lifts as per the direction of Engineer-in-Charge.

Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings,cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth in all leads and lifts

Providing tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level with in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish i/c centring , shuttering , strutting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4mtr and removal of the same for insitu- reinforced concrete & plain concrete work in :-

In foundation, footings & Buttresses etc. in all leads and lifts

Flat surfaces such as soffits of suspended floors , roofs,landings and the like up to 200mm in thickness with in all leads and lifts.

Vertical surfaces such as walls (any thickness), partitions and the like including attached pillasters, buttresses,plinth and string courses and the like with in all leads and lifts.

Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings,cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth in all leads and lifts

Providing form work of ordinary timber plankings so as to give a rough finish including centering shuttering, propping etc. hight of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for-in-situ reinforced concrete and plain concrete work in:- arches, domes, baults upto all span beyond 6.00 mtr.span in all leads and lifts.4mtr

Arches Dome vaults up to all span complete in all leads and lifts

Random rubble masonry/ polygonal rubble masonry(uncoursed/brought to courses) in walls with hard stone of apporved quailty in foundation & plinth including levelling up with cement concrete 1:6:12(1Cement :6 sand :12 graded stone aggregate 20 mm nominal size) in cement mortar 1:6 (1 Cement : 6 Sand) with in all leads and lifts.

Stone / Boulder filling under floor dry hand packed tightly within all leads and lifts.

Providing & Laying No fine concrete 1:6 (1 cement : 6 Sand graded stone aggregate 40 mm nominal size) and curing complete:-- in walls (any thickness but not less than 0.1 mtr. Thickness) attached pillasters,buttresses,plinth and string courses etc. from top of foundation level upto floor two level in all leads and lifts.

Providing and laying cement concrete 1:5:10 (1Cement : 5 Sand : 10 graded stone aggregate 40 mm nominla size) with 15% plum and curing complete excluding cost of form work in retaining wall, the size of plum shall usually be 150 mm to 300 mm as per HPPWD specification with all leads and lifts.

Brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6 ( 1 Cement : 6 Sand ) second class bricks with in all leads and lifts.

Half brick masonry in common brunt clay building bricks in cement mortar 1 :4 ( 1 Cement : 4 Sand ) second class bricks with in all leads and lifts.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jump lock jamb, beed and if required angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel but things 2.5 mm thick with gaurds, lock strike plate and shock as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-charge.

Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows, including black enamelled iron butt hinges with necessary screws 45mm thick 2nd class deodar wood with in all leads and lifts.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with eire of dai 0.56mm for doors windows and clerestory windows and bright finished black enamelled iron hings with necessary screws with in all leads and lifts 40mm thick 2nd class deodar wood within all leads and lifts.

Providing & fixing M.S. grills of required pattern in wooden frames of window etc. with M.S. flats square or round bars with round headed bolts and nuts or by screws plain grills with in all leads and lifts.

Cement concrete flooring 1:2:4 (1Cement : 2 Sand :4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 50mm thick with in all leads and lifts.

6mm cement plaster to ceiling in cement mortar 1 : 3 (1 Cement :3 Sand) with in all leads and lifts.

15 mm cement plaster in single coat on rough side of brick/ concrete / stone walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortor 1 : 6 (1 Cement :6 Sand) with in all leads and lifts.

20 mm cement plaster in single coat on rough side of brick/ concrete / stone walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortor 1 : 6 (1 Cement :6 Sand) with in all leads and lifts.

Raised and cut pointing on brick work with cement mortar 1 : 3 (1 Cement : 3 Sand) with in all leads and lifts.

Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 (1 cement : 3 sand) over a 12mm layer of C.M. 1:3 (1 cement : 3 sand) finished neat with in all leads and lifts complete in all respect.

Prividing plinth protection 50 mm thick in cement concrete 1:3:6 ( 1cement : 3sand : 6graded strone aggregate 20mm nominal size) including finishing the top surface of concrete smooth with in all leads and lifts.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design. complete in all leads and lifts complete in all respect.

White glazed tiles 6 mm thick in flooring cement mortar 1 : 3 ( 1 Cement : 3 Sand) finished with flush pointing in white cement with in all leads and lifts.

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1 : 3 ( 1 Cement : 3 Sand) and jointed with cement slurry with in all leads and lifts.

Providing and laying of Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specified size in flooring cement mortar 1:6 ( 1:cement 6 : sand) jointed with neat cement slurry ( Dark shade) in all leads and lifts.

White washing with lime on un-decorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar dirt and other foreign matter with in all leads and lifts.

Distempering (Two coats) with oil bound of approved brand and of manufacturer and of required shade on undecorated wall surface to give an even shade sand papered smooth with in all leads and lifts.

Finishing wall with water proofing cement paint on approved brand and manufactur and of required shade on un decorated wall surfaces(two coats) to give an even shade after thoroughly brushing including cleaning of oil dirt,dust and other foreign matters , sand papering and knotting etc in all leads and lifts complete in all respect.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt,and other foreign matter , sand papering and knotting ready mixed paint brushing wood primer pink with in all leads and lifts.

Painting two coats ( excluding priming coat ) on new wood and wood based surfaces, with enamel paint to give even shade including cleaning the surface of dirt, dust and other foreign matter, sand preparing and stopping with enamel paint other than white with in all leads and lifts.

Providing and fixing anodized M.S. sliding door bolts with nuts and screws etc. and necessary screws etc. complete with in all leads and lifts. 300x16 mm.

Providing and fixing anodized M.S, Tower bolts (Barrel type) with necessary screws etc.complete with in all leads and lifts.

250 mm x10 mm.

150 mm x 10 mm.

Providing and fixing anodized MS handles with necessary screws etc. complete with in all leads and lifts

Providing and fixing of steel/fibre rainforcement concrement (SFRC) manhole cover with frame conforming IS-12592 (part-I)-1998 with latest ammenments 560 mm dia (Medium duty) in all leads and lifts.

Providing and fixing cast iron manhole cover with frame 455x610 mm rectangul CI cover (light duty) single seal pattern, the weight cover 23kg & weight of frame 15 kg. The total weight of cover and frame not to be less than 38kg complete in all respect in all leads and lifts.

Providing and fixing precast concrete manhole cover & frame confirming to IS-12593-1988, part-I and IS-12592-1991, part-II, 500 mm dia metre (Medium duty) in all leads and lifts.

Laying, jointing and testing of GMS tubes (Light class) in trenches of following dia meter including providing and fixing tube fitting such as bend, teess, airvalves, unionsand collors etc. including carriage og GI pipes as per direction and to the entire satisfaction of the Engineer-in-Charge.

Laying Jointing of GMS tube of 100mm dia ( LC)

Laying Jointing of GMS tube of 65 mm dia ( LC) for inlet & out lets

Laying Jointing of GMS tube of 50 mm dia ( LC) for inlet & out lets

Providing Manufacturing, Supplying, Fabrication and Fixing of MS Fabricated Protection Panel 750mmx750mm made with MS Angle 40x40x4mm for frame, MS Angle 30x30x3mm for cover, MS Flat 25x5mm for fixing of sliding door bolt and MS Sheet 3.15mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS angle, MS Flat & MS Sheet, embedding in RCC Slab by drlling holes in MS angle & in RCC Slab, provision for providing and fixing sliding door bolt 300x16mm, MS Handle 100mm, Lock and applying a coat of red lead paint & Painting two coat with steel paint (Firoze Blue) complete job in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Providing and Fixing Cast steel/ Iron Sluice Valve(with hand wheel)as per IS:780-1984 class-I upto 300 mm dia.(i/c brass spindle & as per 2906-1984 class-II for dia. 300 mm) complete with bolts,nuts,rubber insertion etc.(the tail piece if required shall be measured & paid for separately)complete in all leads and lifts and to the entire satisfaction of Engineer-in-Charge.

50 mm supply valve ( PN-1, Flange Table -5)

65 mm Scour valve ( PN-1, Flange Table -5)

Providing and fixing cast iron spun soil waste and ventilating pipe lead caulked joint to be mearsued and paid for separetely 100 mm dia with CI Cowl 100 mm dia nominal bore complete in all respect.

Providing and fixing wire gauge for vetilitator complete in all leads and lifts

Providing and placing in horizontal layers filtering media duly graded,screened,washed and cleaned as specified by the Engineer - in - Charge.

Top Layer :-Fine Sand (Eff. Size 0.20 mm to 0.40 and uniformity-co-efficient 2.00 to 3.00) Screened, washed, cleaned & graded from approved quarry in all leads and lifts.

2nd Layer :-Coursed sand screened, cleaned, washed & graded 3 mm to 6 mm from approved quarry in all leads and lifts.

3rd Layer :-Bajri screened, washed and graded 6 mm to 20 mm from approved quarry in all leads and lifts.

4th Layer :-Bajri screened, washed & graded 20 mm to 25 mm from approved quarry in all leads and lifts.

5th Layer :- Brocken stone screened, washed and graded for 50 mm to 75 mm from approved quarry in all leads and lifts.

Providing and placing 1st class standard bricks in filter bed in two layers so as to make cross drains as per direction of Engineer-in-charge.

1.20 metre heigh fencing (as per approved design) 1.80 metres R.C.C.posts 3 metres centre to centre and R.C.C. struts with 7 horizental lines and two diagonals of galvanised steel bar bed wire (IS 278-1962 type I) weighing 9.38 kg./100 metres (minimum) strained and fixed to posts by typing to 6mm galvanised steel bar niles/clips with G.I. binding wire including cost of Excavation, R.C.C. Posts,R.C.C. struts and straining belts and embeded in cement concrete 1:4:8 ( 1cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Steel work welded in built up sections,trusses and framed work including cutting,hoisting, fixing in position and applying a priming coat of red lead paint in all leads and lifts.

In gratting,framed guard bar,ladders,railingbrackets and similar works.

Providing and fixing automatic flushing cistern with a pair of C.I. or M.S. brackets complete with fittings including C.I. syphonic apparatus mosquito proof lid, C.P. brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) vitreous China 5 litres capacity with in all leads and lifts and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing vitreous China wash down, water closet (European type, W.C. pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1 : 1 (1 Cement : 1 Sand) (Seat and cover to be measured and paid for separately) white colour with in all leads and lifts and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 100 mm size P or S trap for water closet (Squatting Pan) including jointing the trap with the pan and soil pipe in cement mortar 1 : 1 (1 Cement : 1 Sand) sand cast iron with in all leads and lifts.

Providing and fixing viterous china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting hole including good the same excluding fitting Cera sanitary work (cornet) white 550x400 white with in all leads and lifts.

Providing and fixing viterous china padestral for wash basin complete recessed at the basic for reception of pipe and fittings Cera sanitary work (carnet) white (viterous China in white colour) with in all leads and lifts

Providing and fixing of water storage tank sintex having of capacity 500 litres with necessary fittings including over flow pipes, scour pipes etc. inlet and outlet and inside paint of required size for inlet or outlet and inside paint of approved quality complete including hoisting complete in all respect with in all leads and lifts.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 Kg/Sqcm including fitting the joints with approved adhesive complete with in all leads, lifts and carriage of materials 110 mm nominal bore within all leads and lifts.

Providing and fixing on wall faces PVC door bend (D-Plast) with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive complete 75 mm nominal bore within all leads and lifts.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fittings and clamp including making good the wall ceiling and floor in all leads and lifts 15 mm nominal bore.

Providing and fixing Gun Metal full way wheel valve of following dia with in all leads and lifts.

50mm dia

32mm dia

15mm dia

Providing and fixing brass bib tap (Superior quality or heavy type) 15 mm dia with in all leads and lifts.

Providing and fixing CP brass soap dish with CP brackets fixed to wooden plugs with CP brass screws complete in all respect in all leads and lifts.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2 x 1.50 Sq. mm.

2 x 4.00 Sq. mm.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.50 Sq. mm.

2x4.00 Sq. mm.

Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers including connections etc. as required.

Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.

Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required.

Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.

Supplying and fixing wooden box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required.

229 mm.x 102 mm.x 60 mm. deep

203 mm.x152 mm.x 60 mm. deep

Supplying and fixing ceiling rose on existing junction box/ wooden block including connections etc. as required.

Supplying and fixing plain pandent with 16/20 mm twin twisted, flexible PVC insulated copper cable and backelite pendant holder including connections, etc. as required.

Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, L series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole)

Supplying and Fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 Volts on surface/ recess, complete with tinned copper busbar, netural link, earthbar, dibnbar, detachable gland plates, inter connections, i/c painting, earthing etc. as required busbar 8 way.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (63 amp. CAT - A)

Supplying and fixing 5 Apmps to 32 Amps rating single pole, 240 volts,L- seroies miniature ciecuit breaker of following poles isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (CAT - A) Single Pole

Providing, installing, testing and commissioning of ceiling fan and regulator i/c wiring the down rod of standard length (upto 30 Cm with 1.5 Sqmm PVC insulated copper conductor signle core cable etc. as required.Ceiling fan 1400 mm sweep category A

Providing and fixing of CFL 1x23 watt of reputed make in all leads and lifts.

Providing and fixing of CFL 1x5 watt of reputed make in all leads and lifts.

Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc. as required.

1 x 28 watt-FTL (T5) (Category-A)

Providing and Fixing LED flood Light watt mentioned below (OREVA make) complete in all respect and to the entire satisfaction of Engineer-in-Charge in all respect in all leads and lifts. LED 20 watt

Providing and fixing two core service wire 6 Sqmm thick in all leads and lifts.

AandA Engineers and Contractors