Fabrication and Erection

Amount

Fabrication of Juice distribution Box as existing one from old/new plate

Fabrication of mill roller crown pinion oil tray as per existing one

Fabrication of Cover of mill roller crown pinion as per existing one

Fabrication of cover of under feed roller from 3.0mm th. plate as per existing one

Dismantling Rectification and ererection of runner base along with runner of cane carrier

Repairing of rake of rake carrier including straightening &welding of missing flat (If reqd) square size wear plate at both end.

Fabrication & erection of sand catcher for Juice/Water/Syrup/Melt

Fabrication of scroll disc.& Fitting of the same on 5” nb or 6” nb pipe for making the conveyor scroll disc. Dia 12” to 18” plate thickness 5 to 6 mm, straightness of pipe should be maintained

Repairing of trough of inter rake carrier/cut cane carrier by replacement of wornout portion by old/new section of Iron & Steel and welding.

Dismantling, Fabrication & Erection of trough of inter rake carrier/cut cane carrier as per existing one (straight portion only) from 8/10/12mm th. old/new plate.

Dismantling, Fabrication & Erection of bend portion of rake/cut cane carrier trough as per existing one from 8/10/12mm th. MS Plate old/new

Repairing of donally chute by welding & replacement of worn out portion

Fabrication of donaly chute as per existing on as per direction of Chief engineer with new/old material

Replacement of complete khus khus conveyor trough. Job involve the work of dismantling, fabrication and erection and successful trial erection will be carried out strictly as per existing one. Plate th. 10/12mm. app. length 6 Mtrs.

Repairing of khus khus conveyor trough by replacement of wornout screen portion and wornout portion of donga.

Repairing of DSM Screen chamber box Job involve the work of dismantling and fitting .

Fabrication of cover of side roller bearing of mill roller from 3.0mm th. MS plate.

Dismantling of Wornout DSM Screen complete

Fabrication & Erection of DSM Screen complete in all respect.

Fitting of rake apron of inter rake carrier of mills

Fitting of apron of cut cane carrier

Fabrication of leveller / chopper hood as per existing. one

a) Erection of leveler /chopper hood

b) Dismentling, replacement of wornout portion & fitting of leveller/chopper hood

Dismentling, Fabrication & Erection with proper alignment of rail of Cane Unloader

a) Replacement of wornout casing of fibrizor.

b) Replacement of deflector plate and other heavy structure of fibrizer

Replacement of wornout trough/Tray of cut cane carrier, Inter rake carrier. job involve the work of dismantling, fabrication and erection by new/old section of Iron & steel 10/12 mm th.

Fabrication of under feed roller gear covers as per existing one in two piece.

a)Fabrication of begacillo blower Fan

b) Fabrication of begacillo blower Casing

c) Erection of begacillo blower

Cyclone of dust collector

a) Dismantling

b) Fabrication of cyclone as per sample from old or new MS plate.

c) Erection of cyclone at proper place

d) Patching of cyclone of dust collector. Job involve the work dismantling of worn out portion and fitting of new/old plate at proper place

Repairing of ID fan casing by welding and patching.

Dismantling, Fabrication and Erection of

a) Upper Half of ID fan casing as per existing one

b) Lower half of ID fan casing as per existing one

Replacement of worn out trough/tray of bagasse carrier. job involve the work of dismantling of worn out portion and fitting of new/old suitable section of iron & steel at exact place.

Replacement of ash chute of boiler. Plate thickness .5/6mm Size 400x400x2000mm. job involve the work of dismantling, fabrication & erection.

Dismantling, rectification/ repairing and re-erection of bagasse chute of RBC/CRBC

Dismantling, rectification and re-erection of runner base along with runner both side of Bagasse Carrier/Cross Carrier/bagasse elevator.

i) Fabrication of new bagasse chute for RBC/CRBC

ii) Erection of new bagasse chute at RBC/CRBC

Repairing of feeding chute of bagasse by welding or replacement of worn-out portion of plate ( of Boiler Feeder)

Dismantling, Fabrication and Erection of bagasse feeding chute of boiler feeder with new/old MS section of plate.

Strengthening of column of RBC, CBRC etc. By providing extra section of iron & steel.

Dismantling, fabrication and Erection of side plate of both side of any bagasse carrier. Plate size 5 to 6 mm Th. , width 200 to 250 mm

Fabrication & Erection of MS Pipe drum Size 17” dia x 1600mm long at the end of RBC

Repair and fitting of Bagasse feeding slides above bagasse feeding chutes- boiler

Dismantling of bagacillo screen with frame (above bagacello blower) repair & refitting

Dismantling, Repairing & Fitting of Juice Weighing Scale (Weighing Tank)

Dismantling, Repairing & Fitting of Water Weighing Scale (Weighing Tank)

Reparing of shall of Vapour Line Juice Heater

Replacement of Multijet condenser of Quad.

i) Dismantling of existing condenser complete

ii)Fabrication of condenser strictly as per existing one of MS section of Iron & Steel with bottom cone.Jet box will be fabricated of stainless steel section. Job involve the work of fitting of GM nozzle, its MS Nut of 25 mm th. MS plate and hole flange etc.

iii)Erection of fabricated condenser at proper place. Job involve the work of jointing of top vapour pipe and bottom cone and trial .

Replacement of Multijet Condenser at Pan No. 1 by S.S. Single entry condenser. The job involes the work of dismantling of old condenser and erection of new condenser with jointing all the concerned vapour pipe and trial of the same.

Fabrication of S.S. Single entry condenser. The Job involes the work of making the nozzles also.

Erection of 6” nb coil of quad vapour cell & semikestner

Dismantling of 6” nb coil of quad, vapour cell & semikestner

Fabrication of 6” nb coil to quad vapour cell and semikestner

a) Dismantling of cover of Juice heater/vapour line juice heater and stacking it in scrap yard if necessary.

b) Fabrication of cover of juice heater/VLJH with new 32mm th. MS plate as per existing one.

c) Erection of cover of juice heater/VLJH at proper place.

a)Dismantling of Juice Compartment of any juice heater/VLJH of top/bottom.

b) Fabrication of compartment (Complete) of any juice heate/VLJH to top/bottom.

c) Erection of compartment portion complete at proper place of any juice heater/VLJH top/bottom

Dismentling repairing and fitting of juice compartments of juice heater/VLJH of top/bottom

Replacement of outer shell of saveall of vapour cell. Job involve the work of dismantling of old outer shell fabrication of outer shell from old/new section of iron & steel and then erection at proper place. All existing connections will be maintained of items

Replacement of inner shell of saveall of vapour cell. Job involve the work of dismantling of old inner shell fabrication of inner shell from old/new section of iron & steel and then erection at proper place. All existing connections will be maintained of items

Replacement of top cone of Quad bodies

Replacement of top cone of vapour cell

Dismantling, fabrication & erection of wornout shell ( 1” to 1.1/2”) top & bottom of vapour line juice heater by new plate. replacement of wornout 3 nos. partition plate in juice compartment in top header and fixing of new clit 70 nos, fitting of bolt for both the cover

Repair of down take of evaporator body

Erection of 6” nb coil of clarifier job involves the fitting of flange and replacement of worn out nipple if required.

Replacemnet of Damage arm of clarifier

a) Dismantling of mud boot/juice boot of clarifier.

b) Fabrication and erection of mud boot/juice boot of clarifier.

Replacement of tray of clarifier of any compartment. Job involve the work of dismantling, fabrication & erection at exact place proper double coat welding is required.

Fabrication and Erection of Clerifier for fly ash wet scrubber.

Dismantling and refitting of condenser catcher of vacuum filter. Job involve the work of minor repair if required

Replacement of MS condenser/catcher of vacuum filter. Job involve the work of dismantling, fabrication, erection resting and trial.

Repairing of stirrer of vacuum filter drum by welding, patching etc.

Dismantling, fabrication & erection of stirrer of vacuum filter drum from new/old section of iron & steel.

Fabrication of bucket for lime elevator and sugar elevator as per sample from 5.0mm th. MS plate job involve the work of holes for attachment.

Fabrication of scroll for lime station as per existing one with MS plate of 6/8mm th. 12” dia and fitting of the same on 4”/5” MS Pipe.

a) Dismenteling of Lime Screw conveyer

b) Fabrication of Lime Screw Conveyer Complete

c) Erection of Lime Screw Conveyer complete

Fabrication of sulphur melter as per sample complete in all respect, work of making of valve seat spindle etc. Hydraulic testing of melter is necessary as per direction of Chief Engineer

Fabrication & erection of jacket of scrubber from old vapour pipe new/old section of Iron & Steel.

Fabrication of lower/upper half of sulphur furnace (Port make type) with new/old section of iron & steel as per existing one. Job involve the work of fitting of nipple, flange stud etc.

Dismantling, repairing and re-erection of gas absorption tower of syrup sulphiter

Fabrication and erection of scrubber for port make sulphur furnace as per existing one from M.S Plate of 12/14 mm th. Complete in all respect u.e. cover flange

Replacement of square flange of sulphur furnace Top & Bottom half

Hydraulic testing of cooling coil of water cooled crystallizer as per direction of Chief Engineer. Job involve the work of miner repair if required.

Hydraulic testing of cooling coil of vertical crystallizer as per direction of Chief Engineer job involve the work of miner repair if reqd.

Dismentalling, Fabrication, Eraction & Hydraulic Testing of complete Coils of Vertical Crystelizer in all respect

Fabrication& erection of cone from 8/10/12mm th. plate of any size and erection of the same at directed place. Job involve the work of dismantling also.

Replacement of Multijet condenser of Pan No.1, (35 MT Capacity)

i) Dismantling of condenser including tail pipe

ii)Fabrication of condenser strictly as per existing one

iii)Erection of condenser at proper place. Job involve the work of jointing of vapour pipe and tail pipe complete in all respect.

Replacement of wornout portion of Multijet Condenser of Quad/Pan.

i) Shell with man hole. Job involves the work of dismantling of wornout portion and fitting of new one at proper place.

ii)Spray Box: Job involve the work of dismantling fabrication & erection as per existing one complete in all respect.

iii)Replacement of inner side plate of spray box. Job involves the work of dismantling of existing wornout plate, fabrication & erection of new plate alongwith nozzle.

Replacement of worn out MS pipe of 16”nb to 44”

a) Dismantling of worn out existing pipe

b) Fabrication of pipe from 8/10mm th. MS plate new/old.

c) Erection of Pipe at proper place incase of fabrication/erection ‘V’ is required essentially and then double coat welding wt. of dismantled pipe (Which will be useless) will be calculated on the basis of Std. th. of plate i.e. 8mm minus 3.0mm

i) Pipe Size 16” to 23” nb

ii) Pipe Size 24” to 35” nb

iii) Pipe Size 36” to 42” nb

Dismentalling, Fabrication and Erecrtion of Till Tal Bottel at Pan

Replacement of bend of condenser of Pan/Quad, the job incluses the dismantling, fabrication and erection of bend portion including one meter pipe on both side

Strengthening of vapour pipe by providing the support of old 2” nb/2.1/2”nb pipe in inner side.

Replacements of outer shell of save all of 60 Tons pan. Job involves the work of dismantling of old outer shell, fabrication of outer shell from old/new section of iron & steel and then erection at proper place All existing connections will be maintained as it is.

Replacement of outer shell of saveall of Quad bodies. Job involve the work of dismantling of old outer shell, fabrication of outer shell from old/new section of iron & steel and then erection at proper place. All existing connection will be maintained as it is.

Replacement of condensate channel of Pan calenderia . Job involve the work of dismantling of existing channel and fabrication and erection of new channel at proper place.

Replacement of umbrella of saveall (Fine Type)of vapour cell. Job involve the work of dismantling of existing fabrication of new strictly as per existing one or as directed by Chief Engineer

Replacement of umbrella of saveall (Fin Type)of quad bodies. Job involve the work of dismantling of existing, fabrication and fitting of new one strictly as per existing one or as directed by Chief Engineer

Replacement of umbrella of saveall (Fin Type)of Pan 60 Tons. Job involve the work of dismantling of existing, fabrication and fitting of new one strictly as per existing one or as directed by Chief Engineer

Replacement of umbrella of saveall (Fin Type)of Pan 40 Tons. Job involve the work of dismantling of existing, fabrication and fitting of new one strictly as per existing one or as directed by Chief Engineer

Replacement of stirrer of air cooled crystallizer job involve the work .

i) Dismantling of existing wornout stirrer

ii)Fabrication and erection of stirrer at proper place.

Replacement of outer shell of saveall of Pan. Job involve the work of dismantling of old outer shell fabrication of outer shell from old/new section of iron & steel and then erection at proper place. All existing connections will be maintained of items

Replacement of inner shell of saveall of Pan. Job involve the work of dismantling of old outer shell fabrication of outer shell from old/new section of iron & steel and then erection at proper place. All existing connections will be maintained of items

Dismentalling of the bottom of Eveporator Body, Fabrication & Erection of ring then erection of bottom to increase the space in body

a)Dismantling of discharge Valve complete with driving arrangement of any pan

b) Fabrication of discharge valve complete

c) Erection of discharge valve complete with driving arrangement of any pan

Repairing of water cooled/Vacuum/Dry seed crystallizer by replacing the demege arms (ribben type)

Replacement of shall of vacuum crystilizer Upper Half Shall

Replacement of shall of vacuum crystilizer Complete Shall

Fabrication & Erection of support of stirrer of air cooled crystallizer by MS section of Iron & Steel

Replacements of outer shell of save all of 40 Tons Pans. Job involves the work of dismantling of existing old outer shell fabrication of outer shell from old/new section of iron & steel and then erection at proper place. All existing connection will be maintained as it is.

Replacement of top cover plate of saveall of 12mm thick plate in proper place including proper strengthening work etc.

i) 40 Ton Pan

ii) 60 Ton Pan

Replacement of pan charging header. Job involve the work of dismantling, fabrication of header by fitting of various nipple, flange as per existing one and then erection at proper place.

Replacement of steam coil (Retangular shape) of molasses tank at pan floor.

Replacement of existing condensate channel of pan calenderia. Job involves the work of dismantling of existing channel and fitting of 6” nb pipe as per requirement at proper place

Repaired/replacement of wornout portion of centrifugal saveall of Pan

Replacement of driving side bed of crystallizer

Replacement of damage arm of crystallizer

Replacement of wornout conical portion of Pan

i) Top Cone

ii) Bottom Cone

Rewelding of Pan bottom saucer ( both side) making ‘V’ groove

Fabrication and Erection of ‘J’ Pipe in Pan

Fabrication and Erection complete Pan The job includes the Dismantling, fabrication and Erection of Pan including outer shall, lower cone, Top cone, saveall, feeding header, umbrella exhaust/vapour pipe connection with required strengthing and succesfull trial

60 Ton Pan

40 Ton Pan

Replacement of Top cone with seveall

For 60 Ton Pan

For 40 Ton Pan

Replacement of wornout trough tray of hopper. job involve the work of dismantling, fabrication and erection by new/old section of Iron & steel .

Fabrication & Erection of complete hopper tray as per existing and complete in all respect and satisfactory trial. Size app. 8.5 Mtr to 11 Mtr Width 1.5 Mtr Depth 0.25 Mtr , Plate th. 5/6 mm

Fabrication of discharge chute of sugar grader from 3.0mm th. plate as per existing one.

Fabrication of discharge chute of SD machine from old or new 3.0mm th. plate. Size 700x400x300mm

Fabrication of Molasses. Separator box of centrifugal machine strictly as per existing one.

Replacement of worn out duck plate of hopper. Job involves the work of dismantling, fabrication from old/new section of iron and steel and erection.

Dismantling, repairing and fitting of sugar discharge chute of grader.

Replacement of wornout channel of sugar gradar. Job involve the work of dismantling of existing channel and fitting of new channel at proper place

Dismantling, fabrication & erection of Magma mixer as per existing one with old/new section of iron & steel complete in all respects. A Magma, C Magma

Installation of molasses pump compete with Gear Box Motor including Bed fabrication and fitting etc.

Installation of Magma pump compete with Gear Box Motor including Bed fabrication and fitting etc.

Fabrication and erection of super heater wash water coloum as per existing one and hydraulic testing.

Repairing and hydraulic testing of super heated wash water coloum.

Replacement of wornout plate of hopper with the fitting of new Angle iron flange etc.

Replacemant of Hopper Tray

Replacement of wornout plate of chute of sugar grader

Fabrication & Erection of Vapour Extraction blower for S.D. Machine

Fabrication of Tilting chute as per existing

Dismantling and fitting of submersible pump set

Fabrication of motor cover/Guard with old dGC.Sheet/200 Empty drums.

i) Up to 20 HP Motor

ii) above 20 HP & Up to 50 HP Motor

Fabrication of suction strainer of spray/injection pump/injection channel.

Cleaning of chocked nozzle of spary system during general cleaning.

Fitting of dummy flange of spray system app. Qty. of flange 50 Nos.

Dismantling of CI Nozzle of Spray system 2”nb

Dismantling of CI Pipe of 2” nb of Spray system

Dismantling of CI Bend of 2” nb of Spray system

Dismantling of CI Cluster of spray system

Dismantling of 6” nb CI Pipe of Spray system

Erection of C.I. Nozzle of 2”nb of Spray System

Erection of C.I. Pipe of 2” nb of spray system

Erection of C.I. bend of 2”nb of Spray System

Erection of C.I. Cluster of Spray system

Erection of 6” nb C.I. Pipe of Spray System

Fabrication of cluster

Dismentling and erection of Spray System

a) Main Pipe Line

b) Branch Pipe Line

Fabrication of M.S. Pipe of Spray System

a) Main Pipe Line

b) Branch Pipe Line

Dismantling, cleaning & refitting of cooling coil of molasses. storage tank job involve miner repair of coil if required.

Replacement of bottom plate of syrup/molasses Tank at pan floor Size plate th. 10mm th.

Replacement of wornout portion of Pan/ Quad/ Vacuum Crystallizer/Seed Crystallizer etc.

i)- Dismantling

ii) Fabrication & Erection

Dismantling and Refitting of Top Cover of Cation/Anion Tank of DM Plant

Dismantling and Refitting of Bottom Cover of Cation/Anion Tank of DM Plant

Modifacation in pug mill (if required) for shifted S.D C/F Machine

Fabrication & Erection of outer casing of S.D C/F machine

Replacement of inlet vapour pipe (L type) in quad 4th body 500 mm dia

Replacement of driving attachment portion of sugar hopper

M.S. Bend of condenser of pan/quad the job includes the fabrication & erection of bend portion including one meter pipe line on both side.

Replacement/Repair/Febrication and Erection of main vertical I beam column of main structure of machinery. Provision of temperry additional support to main structure at the time of replacement of main coloumn covers under this job.

Replacement of main horizontal base structure of machinery by required Ibeam/chennels

Febrication and Erection of Oil & Grease skimmer

Vertical Shade at R.B.C. by New/Scrap Material

PART (B)

Replacement of worn-out runner of cane carrier/cut cane carrier / intor rake carrier and all bagasse carrier

a) Straight portion at ground floor

b) Straight portion at 12 to 14 Mtr hight

c) Perpendicular portion up to 12 Mtrs hight

d) Inclined portion

Cutting of chevron Groove:-

a) In Reshelled Roller

b) In Old Regrooved Roller

c) In Old Under Feed Roller

d) In Reshelled Under Feed Roller

Fabrication of Juice Ring from old/New MS plate 8/10/12mm Thik

Reclaining of teeth of mill roller crown pinion

Straightening of cane carrier slate

Repairing of paddle of bagasse carrier by straightening and welding

Dismentling, Febrication and erection of side plate of Cane Carrier

Replacement of flue gas Air ducting of boiler a) Dismantling, Fabrication & Erection

Fabrication and erection of platform from scrap material including dismantling also.

Fabrication & erection of railing pipe from scrap material .

a) Provision of Support of M.S. flat/angle iron 65x65mm/75x75mm/100 x 100mm thickness 8mm/10mm/12mm

b) Strengthering of support already exist

A) Dismantling, fabrication and erection of MS tank square/rectangular/ conical bottom at ground floor .

i) Dismantling

ii) Fabrication

iii) Erection

At 8 to 10 Mtr hight.

i) Dismantling

ii) Fabrication

iii) Erection

B) At 16 to 20 Mtr hight.

i) Dismantling

ii)- Fabrication

iii) Erection

Patching of vessel/tank/gutter, pipe line trough etc. from new/old The work of dismantling of old worn out section of Iron & Steel if required

a) Small patch less then 1 sq. mtr

b) Big patch above 1 sq. mtr.

Dismantling, re-welding and re-erection of old vapour/exhaust pipe of any size (The job includes the work of dismantling rotating the position of pipe and then rewilding)

Replacement of brass/SS tube of juice heater /VLJH/Semikestner.Job involves the work of dismantling of old tube, fitting of tube and their hydraulic test.

a) Dismantling

b) Fitting

Replacement of brass/SS tube of Pan Job involves the work of dismantling of worn out old tube/fitting of new/repaired tube and than hydraulic test.

a) Dismantling

b) Fitting

Replacement of brass/SS tube of Quad bodies’ job involves the work of dismantling of wornout tubes fitting of new/repaired tube and hydraulic testing.

a) Dismantling

b) Fitting

Provision of flat iron 8mm x 100mm/8mm x 75mm butt joint of molasses storage tank for strengthening purpose welding on both side of flat iron required.

Re-welding of worn out welding of any tank, tray, gutter etc.

Re-welding of cross purline joint of trusses at proper place in any house.

Fabrication and erection of staging for plate form from MS channel 100x 50/150 x 75 of gurder and angle iron.

Fabrication of Cable rake by old boiler tube/new agnle iron/MS flat

a) Width up to 1.1/2’

b) Above than 1.1/2, to 5’

a) Erection of cable rake and fitting of cable in rake as per direction of Chief Engineer.

b) Laying of power cable 240 Sq.mm in the rake

c) Laying of power cable (under ground) 120 Sq.mm

Replacement of gutter/chute from 6 to 8 mm th. new/old MS plate.

i) Dismantling

ii) Fabrication and erection

Shifting of scrap material from one place to other place within area of 200 mtr

Straightening of old Scrap curved M.S. Plate.

Straightening of old MS Pipe of 20” nb to 44” nb Dia (Conversion in plain section).

Provision of support of Pan body shell of 60 Ton cone by angle iron of any size

Provision of inside support of 60 Ton Pan with ribs of M.S. Plate Size 350x 350x10mm

Drilling of Holes in any plate, flange, coupling etc Size 1 /2”” nb to 1” nb

Dismantling of MS/GI/SS Pipe along with, bend, flange, tee & reducer etc.

i) Size ½” nb to 2” nb

ii) Size 2.1/2”nb to 6”nb

iii) Size 8” nb to 12” nb

iv) Size 14”nb to 16 “nb

Erection of MS/GI/SS Pipe along with, bend, flange, tee & reducer etc.

i) Size ½” nb to 2” nb

ii) Size 2.1/2”nb to 6”nb

iii) Size 8” nb to 12” nb

iv) Size 14”nb to 16 “nb

Replacement of MS bend, tee, cross, reducer. Job involves the work of dismantling and fitting.

i) Size ½” nb to 2” nb

ii) Size 2.1/2”nb to 6”nb

iii) Size 8” nb to 12” nb

iv) Size 14”nb to 16 “nb

Fabrication of bend,tee Cross & reducer etc.

i) - Size 2”nb to 6”nb

ii) Size 8” nb to 12” nb

iii) Size 14”nb to 16 “nb

Cutting of Old Flange Iron old and wornout Pipe

i) - Size 2”nb to 6”nb

ii) Size 8” nb to 12” nb

iii) Size 14”nb to 16 “nb

Replacements of Nipple/Distance piece Job involve the work of dismantling fabrication and erection.

i) Size ½” nb to 2” nb

ii) Size 2.1/2”nb to 6”nb

iii) Size 8” nb to 12” nb

iv) Size 14”nb to 16 “nb

v) Size 16” nb to 24” nb

Dismantling of Valve

i) Size ½” nb to 2” nb

ii) Size 2.1/2”nb to 6”nb

iii) Size 8” nb to 12” nb

iv) Size 14”nb to 16 “nb

Erection of Valve

i) Size ½” nb to 2” nb

ii) Size 2.1/2”nb to 6”nb

iii) Size 8” nb to 12” nb

iv) Size 14”nb to 16 “nb

Dismantling of man hole 16” nb to 20”nb

Fabrication and erection of man hole from old/new section of iron & steel 16” nb to 20”nb,

Welding of New/Old Flange.

i) Size ½” nb to 2” nb

ii) Size 2.1/2”nb to 6”nb

iii) Size 8” nb to 12” nb

iv) Size 14”nb to 16 “nb

Fabrication of long bend 3 to 5 Mtr length of 5”/6” nb Pipe

Opening and fitting of dummy flange of Pipe Line

Fabrication and erection of Coil in circular shape

i) From 2” nb to 2.1/2” nb Pipe

ii) From 3” nb to 4” nb Pipe

iii)Fron 6” nb Pipe

Fabrication of Flange. Job include the work of face/OD maching and drilling of hole. Holes will be drilled by drill machine only

Dismantling of C.I. Pipe of 12”nb to 16”nb Size

Erection of C.I. Pipe of 12”nb to 16” Size

Painting of Boiler Chimney inside & out side surface by Aluminium paint and black heat registant paint respectirvely.

Dismantling, fabrication and erection of vaccum filter juice tray with fitting of all related accessaries

WORK OF WELDING

a) Pipe welding

b) Plate welding

c) Miscellenous work of welding

Dismantling, Fabrication & Erection of Horizental crystallizer complete coils and hydraulic Testing of Coils

Replacement of bend of Juice heater and exhust pipe size 16" to 26" the job incloses the dismantling, fabrication & erection of bend porition including one meter pipe on both side

Fabrication of long bend 3 to 5 Mtr length of 8”to 10” nb and 2" to 4" nb

Bagacillo cyclone Dismentling , Fabrication & Erection

Dismentling , Fabrication & Erection of Bagacillo pipe line

Dismentaling of main pipe line for spray Pond (C.I. pipe)

Dismentling , Fabrication & Erection of vantury of Pan and Quad condenser as per existing one M.S. Plate 10 to 12 mm Th.

Dismentling & Fitting of M.S. Pipe Line (Molasses pipe line main of molasses weighing scale to molasses tank along with bend, tee, reducer etc.

Dismentling of S.D. machine with all accessories i.e. pug mill coplete structure, hopper staging stair, plare form, electrical panel etc.

Dismentling of complete raw juice heater

Dismentling & Erection of rail for cane unloader

Straightening of trough for Cut Carrier, IRC, BE & RBC with strenghening from bottom side

Dismentling, repairing & Strenghting of boiler chimney

SAHAJAD ENGINEERING WORKS

SAZID CONTRACTOR