Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.5 LAccepted-AOC | L1 | Accepted-AOC L1 bidder with reasonable rates | |
| 2 | L2₹34.5 L+₹3.1 L (9.96%)Rejected-Finance 26 2579 THEVARA PO KOCHI ERNAKULAM KERALA 682013 | KOCHI | ERNAKULAM | KERALA | 682013 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹39.7 L+₹8.3 L (26.4%)Rejected-Finance KURUPPAMPARAMBIL PERUMPADAPPU PALLURURHY P O ERNAKULAM KERALA 682006 | ERNAKULAM | KERALA | 682006 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹43.9 L+₹12.5 L (39.7%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | Rejected-Technical | - | Rejected-Technical Change in constitution is involved due to sad demise of partner of the firm. Firm not submitted EMD. |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
18 May 2021, 6:00 pmClosed
CWE (NW) Kochi
CWE (NW) Kochi PIN-682004
REPAIR/MAINT OF CERTAIN HIGHER SIDE MACHINERY OF CENTRAL AC PLANT AND CONNECTED WORKS AT NAVAL BASE KOCHI
2021_MES_437616_1
CWE(NW)KOCHI/81198
Open Tender
Civil Works
Item Rate
180 days
Kochi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE (NS) Kochi
₹90,000
Yes
25 Jun 2021
21 Apr 2021
20 May 2021
21 Apr 2021
18 May 2021
4 May 2021
21 Apr 2021 - 11 May 2021
Amount
Material and labour for opening body cover and dismantling of ACCEL make compressor model 4/65,/6/65 and 8/65 ,repairing/ maint and cleaning / servicing the serviceable parts ,replacing gaskets,replacement of shaftseals, O rings,piston rings ,suction / discharge reeds , oil scraper, rings springs and including remetalling,grinding and polishing of shaft/piston rods etc if found defective and ressembling, testing for proper functioning including proper alignment with primovercomplete al as specified and directed. Note: Spares shall be measured and paid seperately
Material and labour for opening body cover and dismantling of VOLTAS Make compressor model 5 H 40, for repairing/ maint and cleaning / servicing the serviceable parts ,replacing gaskets,replacement of shaftseals, O rings,piston rings ,suction / discharge reeds , oil scraper, rings springs and including remetalling,grinding and polishing of shaft/piston rods etc if found defective and ressembling, testing for proper functioning including proper alignment with primover complete al as specified and directed. Note: Spares shall be measured and paid seperately
All as per item 2 above but for compressor 5 H 60 Make : Voltas
All as per item 2 above but for compressor 5 H 120 Make : Voltas
All as per item 2 above but for compressor 5 F 40 Make : Voltas
All as per item 2 above but for compressor 5 F 20 Make : Voltas
Supply only HP/LP Dual static cut out switch (MP-15R) suitable for 5H,5F model compressor of Makle Voltas
Supply only Pressure suction (transduser) sensor (setra) for 5H and 5F model compressor of Makle Voltas
Supply only Discharge pressure and oil transdusers (setra) for 5H and 5F model compressor of Make Voltas
Supply only Shaft seal assly with ring, Shaft seal cover along with gasket for 5H type of Make Voltas
Supply only Shaft seal assly with ring, Shaft seal cover along with gasket for 5F type of Make Voltas
Supply only cylinder sleeve for 5H and 5F model compressor of Make Voltas
Supply only Chilled water sensor with controlling cable as suitable for exising chiller socket/groove in Voltas and Accel chiller units
Supply only Cylinder liner with 'O' rings for accel 4/65, 6/65,8/65.
Supply only Shaft seal assly with ring, Shaft seal cover along with gasket for accel 4/65,6/65,8/65 Type.
Supply only HP/LP Dual static cut out suitable for Accel Make compressor
Supply only Solinoid valve/catchall filters/power element for central AC plants
Supply and fixing in replacement of old unsv Hand Shut off valve ,including welding /cutting the existing ms pipe line (suction and discharge) match the exisitng surface,complete all as specified and directed.
Supply and fixing in replacement of old unsv Liquid line butterfly valve 3/4" ,complete all as specified and directed. Make:Castle
Supply and fixing in replacement of old unsv Expansion valve suitable for central AC upto 40 TR complete all as specified and directed. Make: voltas/Accel
Supply and fixing in replacement of old unsv Expansion valve suitable for central AC 41 to 80 TR complete all as specified and directed. Make: voltas/Accel
Supply and fixing in replacement of old unsv strip heater of capacity 2-3 KW suitable to fit in existing pleanum/fitment stands complet all as specified and directed.
Supply & fixing of replacement inThermal Insulation of exposed area of ducting calss 'O' with Glass cloth covering on Out door Ducts ,exposed to sunlight using Class O Nitrile Rubber of 13 mm thickness outer sideof exisitng Ducts using manufacturer's recommended Rubber based Adhesive in a blend of solvents complete as per Specifications. Make:superlone/aerocell
Supply & fixing in replacement of 13 mm thickness Thermal Insulation of exposed area of ducting covering on Out door chiller water pipe lines using Class O Nitrile Rubber outer sideof exisitng pipelines using manufacturer's recommended Rubber based Adhesive in a blend of solvents complete as per Specifications. Make:superlone/aerocell
Material and labour for Superior Quality canvas cloth with zip for connecting places at AHU near pleanum boxes and Ducting connections including necessory rivitings,nut bolts as per existing size and shape complete all as specified and directed
Supply and fixing in replacement of analouge pressure gauge for existing pipe lines and plants as per suitable (dia) size and model including MS bend pipe upto gauge where required at site complete all as specified and directed.
Supply aand fixing in replacement of temperature gauges for existing pipe lines of central AC plants as per suitable size and model complete all as specified and directed
Supply , fabrication and erection in replacement of GI sheet with TDF flange rectangular/square duct of size 22 Gauge made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt,Gasket and appropriate sealant on longitudinal joints etc complete complete all as specified and directed.
All as per item No. 28 above but duct size 20 Gauge
Supply and charging Refrigerant Gas R 22 in sealed cylinder including leak testing by using nitrogen gas all as specified and directed by Engineer in Charge. Note :- 1.Nitrogen will be measured and paid seperately 2.Empty cylinder will returned to contractor after usage
Supply and charging Refrigerant Gas R 407 C in sealed cylinder including leak testing by using nitrogen gas all as specified and directed by Engineer in Charge. Note :- 1.Nitrogen will be measured and paid seperately 2.Empty cylinder will returned to contractor after usage
Supply only Nitrogen gas contains 12 PSI of pressure in each cylinder.
Supply and fix in repairs poly F plus PB classical V- Belts suitable for existing Compressor motor and AHU motor sizes (any type of A -Series) all as specified and directed. Make : Fenner/Dunlopp
Supply and fix in repairs poly F plus PB classical V- Belts suitable for existing Compressor motor and AHU motor sizes (any type of B -Series) all as specified and directed. Make : Fenner/Dunlopp
Supply and fixing in replacement of tire coupling of model U26.2514PX type aloong with nutbolts suitable as existing connections of primemover and compressor complete all as specified and directed.
Supply and charging,testing of compressor oil superior quality in sealed barrel all as specified and directed by Engineer in Charge. Make:IOC/HPCL/BPCL
Supply and replacement scroll type sealed compressor of capacity for package type upto 8.75 TR 3 phase 415V including removing the existing unserviceable compressor with alteration to existing connections including refrigerent charging of suitable refrigerent up to working pressure as required complete all as directed. Make: copeland/Danfoss
Supply ands fixing in replacement of microprocessor control panels VLRP type working with 15VAC for voltas control panels, make for 5H/5F model central AC plant as suitable and fitting for existing panels. Make: voltas(Soft hard)
Supply ands fixing in replacement of microprocessor control panels for blue star make package type AC plant as suitable for inverter/normal operation type machines and fitting with all connected items for smooth operation of plants complete all as specified and directed. Make: Blue Star
Material and labour for brazzing/welding work at refrigerent copper pipe lines(suction/discharge) and rectify the fault and recharge the refrigerent as desired level in AC units. Note: welding mtrl,copper pipe material,welding gas cylinder shall be provided by contractor with his own transport upto near the centrl/Package AC plants inside Naval Base .
Supply,and fixing of Air cooled Floor mounted Out door unit (Condenser unit) suitable capacity for existing Package AC 7.5 TR or nearest higher availble capacity as recommended by OEM including required foundation for base and installation work as per OEM recommendation with making up good existing walls/floors with existing finishes,including suitable electric XLPE cable of size as per OEM recommendations for connecting between indoor,outdoor units and fixed on cable Tray and old out door unit shall deposite to MES stroe yard with contractors own transport complete all as specified and directed. Make: Voltas model DPUA
supply and replacement of digital controller assembly along with control cables for operation of compressor/condenser unit etc of Voltas make suitable for capacity of 7.5 TR complete all as specified and directed.Make :Voltas
Supply and fixing in replacement of old unsv Expansion valve suitable fro packeage type Ac plant upto 7.5 TR /8.75TR complete all as specefied and directed. Make: voltas/Blue star
supply and replacement of indoor filter of Package AC units as suitable in existing frame up to capacity 7.5 TR/8.75TR complete all as specefied and directed.
suply and fix Fan coil unit capacity of 2.75 TR to 3 .00 TR working with 1200 CFM , Made of steel of superior quality enclosure to Single phased motors are used for noise reduction of the centrifugal blades Long life Quality aluminium fins and copper tubes are used for efficient cooling and heating Insulated drain pans complete all as specified and directed. Make: as recommended by OEM (i.e Voltas)
Material and laying of Refrigerant piping (Suction & Discharge) Hard drawn from hard copper tube of suitable sizes as recommended by OEM , with copper elbows, tees all connecting material for Indoor and outdoor unit connections. Note: One run of both Suction & Discharge pipe line along with insulation shall be measured as one length.
Supply and fixing of Hard PVC Piping 40 mm up to drain disposal area with nitrile rubber insulation complete all as specified and directed.
Supply and fixing 600mm X600mm fresh air inlet made-out of GI sheet 22 SWG duly fabricated with splitter damper arrengement and cowl and bird screen complete all as specified and directed.
Supply and fixing of supply/return air diffusers of machine fabricated made out of aluminium 18 Gauge sheet construction of various sizes duly powder coated of approved colour to suitable as existing duct projections/openings including GI collar VCD for supply air inlet all as specified and directed.
AR Traders
Albert Rebello and Company
National Creations
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .