Loading
Loading…
Loading…
Tender Value
₹5.8 Cr
EMD Value
₹11.6 L
Closing Date
14 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
16 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender
UPLOADING OF THE CERTIFICATE:-The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure- V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP)etc., as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
DEFINATION OF SIMILIAR NATURE OF WORK:-"Any work of EI /PI/RRI work which include indoor signalling work. OR RDSO approved OEM for EI"
8 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All payment and other conditions are attached with tender document.
Although year of specification is given in the schedule, last amendment, if any, shall apply.
All tenderer must have valid GSTN number and rates must be inclusive of GST Act and itsamendment.
Compliance of GST act/rules & correction/modification issue by railway board with regard toGST act shall be binding on contractor & railway.
Genral instruction :- 1 The offer will be evaluated based on certificates enclosed with theoriginal offer only. The Railways will not enter into any correspondence to get thesecertificates subsequently and the offer shall be evaluated based on the documents submittedalong with the offer.2 Tenderer may please note that meeting of eligibility criteria is strictlybased on completion certificates issued by the executive in charge of work and not linkedwith mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways. 3 Tenderer may please note that fulfilling of eligibility clause shall beascertained only from the completion certificates issued by the executive-in-charge of workand mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways shall not be enough. It may also be noted that cognizance of thoseworks, which are nearing completion or have been almost completed, shall not be taken onlythose completion certificates, wherein successful commissioning satisfactory performanceof work have been clearly unambiguously acknowledged by Executive-incharge of anyRailway Unit or any Govt. Dept./Undertaking for any similar work shall be considered for thispurpose.4 Any variation to quantities in any item and its associated wiring material account ofsupply and installation will have to be born by the tenderer. Railway Engineer s decision inthis regard shall be final.5 All drawings related with the work can be obtained from the officeof DRM Kota on any working day during office hours.
Provision of Electronic Interlocking System with Digital Axle Counter (MSDAC) in station yard, along with S&T service Building at HDN Route Station Hindaun (HAN) on Kota Division.
KOTA-SNT-SIG-2026-10~WCR
KOTA-SNT-SIG-2026-10
Open
Works - General
12 Months
Kota, Rajasthan
₹0
₹11.6 L
13 Aug 2026
13 Aug 2026
31 Aug 2026
173 items across 3 schedules · ₹5,81,39,256.21 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Design, manufacture and Supply of EI system (with centralised arrangement) for way side stations as per Signal Interlocking plan, complete with hot standby architecture as per ANNEXURE-A- 1.The item unit will be per station. | Per Unit | 1.00 | 1,42,08,109.74 | 1,42,08,109.74 |
| 2 | Supply of Portable workstation for data input and configuration with necessary software/Programs/ Accessories/ Simulation for Functional testing, diagnostics, trouble shooting and commissioning of EI system with A3 colour printer. One set shall comprise of 2 No. Workstation(PC) and 2 No. A3 colour Printer with necessary software and accessories as per Annexure"Workstation". | Numbers | 1.00 | 1,23,206.3 | 1,23,206.3 |
| 3 | Supply of "Instruments and tool kits required for Trouble Shooting and repair of hardware and software for EI system should be supplied for stations as per schedule item 1 of EI above. (This includes tools required for EI maintenance sorts of crimping,insertion, removal, general purpose,tools like screw drivers, spanneers,PCB extractors, temp controlled slodering iron, wire cutter, nose pliers etc. & measuring instruments with carrying case/ holders/cabinet for technicians and J.E for testing,maintenance and repair at site) two sets. Each set comprises of the following: i)Crimping tools for all types of special cable assembly used in EI system. ii) Insertion tools for all types of Special cables assembly used in EI system. iii)Removal tools or all types of Special cables assembly used in EI system. iv)Digital multimeter(Fluke 111 or better) v)Steel cabinet/Almirah/ size 1980mm height, 915 mm width and 485 mm depth( godrej make/Jalaram) of good quality to store tools, spare cards and documents. vi)Steel book rack Size:1850mm*900mm*316mm (H*W*D)for keeping documents (Godrejmake/Jalaram). vii)Clamp earth tester viii) Clamp current meter.Note:- Any other Tools required for truoble shooting and repair and recommended by OEM shall be supplied by contrcator free of cost Note: Tool kit supplied by contractor will have to be certified by OEM that these tools are sufficient for maintainence/ Repair/ Troubleshooting.Per Unit = Per Station. | Per Unit | 1.00 | 78,615.67 | 78,615.67 |
| 4 | "Supply of powder coated 1 Way Main Cable Termination rack complete with scaffolding, fixtures & accessories including square bars for mounting 8-way terminal blocks/wagos, ladder, string rods, frame, base assembly, insulators, J-bolt, nut/bolts & fasteners, phenolic laminated sheet board etc. Siemens type & as per extant practice on W.C. Rly. Typical part list as per Annexure 'K' for 3-way and Annexure 'L' for 2-way attached and Rack arrangement as per WCR DRG. No. S&T EQPT. BLDG/2013/Pt. 1/4 and Rack plan as approved by Engineer incharge. " | Set | 4.00 | 34,991.63 | 1,39,966.52 |
| 5 | Supply of powder coated Relay Rack Assembly Complete with scaffolding, fixtures and accessories including MS Bars for fixing of relay plug board, string rods, fuse strips with bracket, 11-Way Bus Bars with cover and mounting brackets ,runway for cable/wires, frame base assembly with IDF pillar etc. Siemens type & as per extant practice on W.C. Rly. Typical part list as per Annexure 'J' attached and Rack arrangement as per WCRDRG. No. S&T EQPT.BLDG/2013/Pt. 1/4 and Rackplan as approved by Engineer incharge. | Set | 1.00 | 40,627.58 | 40,627.58 |
| 6 | (i) Supply of 4 conductor disconnect terminal block with test & measurement facility, with screw less, spring cage clamp connections suitable for 0.08 to 2.5 Sq.mm conductor with current capacity of 16 Amps as per RDSO Spcn. No. RDSO/SPN/189/2004 Ver. 3.0 or latest. | Numbers | 3000.00 | 74.47 | 2,23,410 |
| 7 | (ii) Supply of End plate compatible to above screwless terminals. The end plates shall be of different colour than that of disconnect terminal blocks. | Numbers | 300.00 | 14.35 | 4,305 |
| 8 | (iii) Supply of Din rail of dimension 35mm x 7.5mm, 1 mm thickness, 1Mtr length, slotted compatible to above terminals. | Numbers | 150.00 | 129.33 | 19,399.5 |
| 9 | iv) Supply of End Stop 10mm for above Din 35 Rail. | Numbers | 300.00 | 12.68 | 3,804 |
| 10 | Supply of PVC indoor cable 1x60x0.6 mm dia colour coding of insulation of inner core shall be in six colour viz. Blue, Red, Green, Grey, Brown & Black conforming to IRS 76/89 or latest. | Kilometre | 1.00 | 1,85,207.25 | 1,85,207.25 |
| 11 | Supply of PVC indoor cable 1x40x0.6 mm dia colour coding of insulation of inner core shall be in four colour viz. Yellow, Shite, Pink & Violet conforming to IRS 76/89 or latest. | Kilometre | 1.00 | 1,29,126.64 | 1,29,126.64 |
| 12 | Supply of PVC indoor cable 1x24x1 mm dia colour coding of insulation of inner core shall be in six colour viz. Blue, Red, Green, Grey, Brown & Black conforming toIRS 76/89 or latest. | Kilometre | 1.00 | 1,81,786.28 | 1,81,786.28 |
| 13 | Supply of flexible multistrand copper wire size 16/0.2 to IS 694 of various colours suitable for wiring of 'Q' series realys. The contractor shall obtain approval for colour wise quantiy from executive incharge before placing order for this item. | Kilometre | 1.00 | 8,160.65 | 8,160.65 |
| 14 | Supply of PVC flexible cable multistrand wire copper conductors cross section 10 sq. mm as per specn. IS 694/1990 with latest amendment if any. | Kilometre | 2.00 | 1,55,568 | 3,11,136 |
| 15 | Supply of dual fuse alarm system / fuse fail indication cum monitoring and automaticchange over system for vitalfuses as per draft specificationNo. RDSO/SPN/209/2012 Ver2.0 or latest. This consists fuses of different ratings as 0.6A, to 16A. Number of fuses of ratings to be decided as per site requirent and Engineer In-charge. (01 Numbers= 01 Fuse).Spares to be provided as per RDSO Spcifications. | Numbers | 400.00 | 1,511.65 | 6,04,660 |
| 16 | Supply of Q-Series Line Relay (QNA1 Type),AC immunized, 8F/8B, 24 V DC along with plug board (base plate), connectors, retaining clips etc and conforming to BRS-931A and RDSO Specn.No.IRS:S34, S-23 and S-60 or latest. The interlocking code for this unit shall be ""ABDGH"". Inspection authority:- | Numbers | 90.00 | 4,433.63 | 3,99,026.7 |
| 17 | Supply of QSPA1, 24VDC, Slow topick up,8F/4B along with plug board(Base 43 plate), retaining clip andconnectors conforming toBRS:933A,IRS:S60 & IRS:S34.Material inspected by RDSO | Numbers | 15.00 | 5,081.1 | 76,216.5 |
| 18 | Supply of Relay plug in type styleQL1 magnetically latched neutral linerelay, 24 V DC, Metal to CarbonContacts complete with plug board,retaining clip & Connectorsconforming to BRS: 935A, IRS: S@45"38@ IRS: S-23 or latest 11F/4B Front &Back contacts for interlocking codefor this unit shall be ABDEG. | Numbers | 15.00 | 8,435.59 | 1,26,533.85 |
| 19 | Supply of Relay Ac Immune, Plug intype, Style QBCA-1, DC Biased PointContactor, 24V DC, 2F DC, 2HF-4BContacts Front Contacts Heavy Dutyand Back Contacts Metal to CarbonComplete with Plug Board, RetainingClips and Connectors, Conforming toBRS 943, IRS S 34 and IRS S 23.Material inspected by RDSO | Numbers | 15.00 | 6,324.77 | 94,871.55 |
| 20 | "Supply of relay QN1 (Non ACimmunized relay), 8F/8B (24V/50V)along with plug board (Base plate),retaining clips and connectorsconforming to BRS:930, IRS:S34 &IRS:S23 as required. | Numbers | 6.00 | 6,459.07 | 38,754.42 |
| 21 | Supply of QNNA1 (AC immunisedrelay), twin relays 24V DC, 6F/2B or 4F/4B (as required)along with plugboard (Base plate), retaining clipsand connectors confirming toBRS:960, IRS:S34 & IRS:S23. | Numbers | 5.00 | 4,987.24 | 24,936.2 |
| 22 | Supply of Key Lock Relay AC immunised with different ward combinations (Five extra sets of ward plates to be supplied with each relay). Siemens make working on 60V DC 4F/4B or equivalent (Extra No. of wards to be supplied with the consultation of Engineer in charge of work, as per requirement of site and no additional cost will be paid for extra wards). The ward combination shall be A, B, C, D, E, F , G--------Z. | Numbers | 8.00 | 10,525.95 | 84,207.6 |
| 23 | Supply of Insulation MAT for Electrical purpose 2.2 mm thick size 2m x 1m x suitable for 3.3 KV to 11KV (Class B) conforming to IS- 15652-2006 | Sqm | 4.00 | 2,204.56 | 8,818.24 |
| 24 | Supply of Protocol converter for interface the data logger and the EI system suitable for above data logger. Any other equipment/Connector/Cable required to connect EI to datalogger wil have to be supplied by Contractor at his own cost. | Numbers | 2.00 | 30,165.66 | 60,331.32 |
| 25 | Development of TCAS inter face requirement including Hardware (i.e. Protocol converter and any other hardware as per requirement) , software, verification and testing elements by OEM. All other required equipments like switched, FDMS, Patch cords, Connectors, cables required for commissioning shall be supplied in this item. | Numbers | 1.00 | 2,48,419.5 | 2,48,419.5 |
| 26 | TCAS Interfacing-Design of EI system with related application logic & inter face circuit, Factory Acceptance Test (FAT), Site Acceptance Test (SAT), Testing & Commissioning support & Supply of Dcouments in Pendrive only ,at station. (compatible to existing TCAS system)- Stations with Less than 100 Routes | Numbers | 1.00 | 14,43,600 | 14,43,600 |
| 27 | Supply of Automatic Media Change Over of Modem working on redundant channels for data transmission on OFC/QUAD/MICROWAVE Radio. Qty.01 Pair & Modems for UFSBI (for use with secondary media OFC/QUAD) Qty. 01 Pair. Make DES(Delron Elecronic System only). | Pair | 1.00 | 1,18,325.69 | 1,18,325.69 |
| 28 | Supply of Modem compatible with existing UFSBI system of DES make or similar as per Specn No. IRS:S-105/2012 (Ver.0) or latest suitable to interface with OFC fiber (Optical Modem) for Deltron make UFSBI provided in Kota division. | Pair | 1.00 | 33,736.24 | 33,736.24 |
| 29 | "Supply of UFSBI event logger with E1 / Dark Fiber connectivity from site to Control Room." | Numbers | 2.00 | 2,16,618.5 | 4,33,237 |
| 30 | Preparation in Autocad, Fabrication on board, supply & screen printing of SWRD, Track bonding plan, RSP board on white formica of 1200x600x3mm as per instruction of site engineer. Proportionate payment will be made if size of board get increased or decreased.Rate = Per Board item | Numbers | 3.00 | 6,777.72 | 20,333.16 |
| 31 | Supply of Self supporting foldable ladder heavy duty made of Aluminium c section size 66 mm x 31 mm x 3 mm and climbing steps made of aluminium 112 mm wide (4.5 inch) on front side & back side (1 inch) , having service platform at the top size 16 inch x12 inch & rubber shoes are fitted at four legs. size 6 feet height Make: Neelkamal, Godgej or reputed make. | Numbers | 1.00 | 12,526.91 | 12,526.91 |
| 32 | Supply of 48 Fiber OFC JointClosure similar to Specification No.RDSO/SPN/TC/68/2014 Rev 1.0 orlatest. | Numbers | 3.00 | 1,571.21 | 4,713.63 |
| 33 | Supply of Thermo shrink Jointing Kit for jointing underground 0.9 mm dia. cond. 4/6 quad cables as per specn No. IRS: TC- 77/2012 (Rev.3.0) with Amend. 1, 2 & 3 or latest. | Numbers | 20.00 | 3,794.24 | 75,884.8 |
| 34 | Supply of Main Signal Post 140 mm outer dia 4.6 Mtr Length as per specification No. IRS: S-6 with latest amendment. | Numbers | 1.00 | 9,980.63 | 9,980.63 |
| 35 | Supply of Cast iron main signal surface base 140mm as per specification No. IRS: S-10 and Drg No. S-2011/M with latest amendment, with CLS Ladder assembly complete and ladder base for CLS signal 3.6 mtrs/ 4.6 Mtrs./ 5.6 Mtrs. long as per RDSO Drg. No. SA-23150/23153/23156 (Adv.) with latest amendment. This also include, signal front & Back staging complete assembly for CLS unit as per Drg. No. RST/11413. | Numbers | 1.00 | 15,523.55 | 15,523.55 |
| 36 | Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway signaling suitable for RE area TWO Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23003A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Rev 2.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest. | Numbers | 1.00 | 26,354.41 | 26,354.41 |
| 37 | Supply of Shunt Signal Post complete with Base. GI Pipe, 'B' class of 80mm Dia. of min. 1 meter length to be supplied by the contractor. | Numbers | 10.00 | 3,974.08 | 39,740.8 |
| 38 | Supply of position light LED based shunt signal unit (as per RDSO Drg. No. SA- 23840). | Numbers | 10.00 | 14,064.49 | 1,40,644.9 |
| 39 | Supply of Off-Set bracket 5-1/2 '' for Signals & Routes as per Specification No. IRS: S-10/78 and Drg no. SA-23080(Adv) Alt-1 or with latest amendment. | Numbers | 1.00 | 1,317.07 | 1,317.07 |
| 40 | Supply of Retro reflective Signal No. plates as perIRSEM Drg No. 19-D10 with clamps, nut, bolts and other accessories required for Fixing. | Numbers | 11.00 | 721.01 | 7,931.11 |
| 41 | Supply of Pad Locks 50 mm with common key make Godrej / Navtal only. | Numbers | 22.00 | 393.62 | 8,659.64 |
| 42 | Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward no. 41 (as per Specification No. IRS: S-30/64 & RDSO Drg. No. SA- 3376/M with latest Amendments) on both the doors, duly painted with red oxide.-Single Case as per Drg. No. SK- 783-1/2 & 2/2 with latest alteration. | Numbers | 10.00 | 27,857.02 | 2,78,570.2 |
| 43 | Supply of Resettable fuse, type Polymeric Positive Temperature Coefficient (PPTC) Fuse of make Littlefuse/Fuzetec,/Tyco/ Bourn/Raychem. Rating of fuse will be provided by consignee as per site requirement. | Numbers | 150.00 | 13.99 | 2,098.5 |
| 44 | Supply of cartridge fuse block made of PBT as per RDSO Drg. No. SA- 23748 Alt. 4 and Spec. No. IRS-S- 75/2006 with latest ammendment. Fuse block shall be suitable for round head type fuses. (Material inspected by RDSO | Numbers | 150.00 | 278.82 | 41,823 |
| 45 | Supply of round head type non detoriating type low voltage cartridge fuse as per Specn No. IRS/S/78/92 with latest amendments 2A/4A/6A/10A capacity. The bifurcation of the fuses shall be given by site incharge at the time of execution of work. | Numbers | 150.00 | 120.71 | 18,106.5 |
| 46 | Supply of Earth Electrode assembly as per Drg. No. S&T/CON/KOTA/EARTHING/01 ALT - 01. All nut, Bolts & Lugs to be of stainless steel. The earth electrode pipe shall be 'B' Class/ Medium Grade as per Specification No. IS: 1239 Pt. 1/ 2004 of Nominal Inner Dia 50mm, Outside dia (Max 60.8 mm, Min 59.7 mm), Thickness (3.6mm), Tolerance in Thickness ('+' not limited, '-' 12.5 percent). | Numbers | 40.00 | 1,464.4 | 58,576 |
| 47 | Supply of Electric Point Machine IRS make 110V DC operation (AC immunity 160V) NONTRAILABLE, complete with lock, detector, cable termination box and slides for lock and detector (Rotary locking) as per specification no. IRS: S-24/2002 amendment-1 or latest, requirement of point machine is 143 mm throw only as per RDSO Drg. No RDSO/S-10800. | Numbers | 2.00 | 98,274.64 | 1,96,549.28 |
| 48 | Supply of Ground Connection complete set suitable for IRS type Point machine for ordinary turnout of 60 Kg rails as per RDSO Drg. RDSO-S-3361. | Numbers | 2.00 | 15,183.55 | 30,367.1 |
| 49 | Supply of G. I. Bend pipe, 'B' Class/ Medium Grade, 50 mm Dia & 1.2 M straight length and having fixing plate welded with bent pipe as per Drg. No. Dy.CSTE(Con)/Kota/5 for point machine cable entry. | Numbers | 2.00 | 533.64 | 1,067.28 |
| 50 | Supply of Pre-wired Crank Handle cum Key Lock Relay box (of metal) along with accessories viz. LEDs, with approved type push buttons, terminal strips, string rod, etc. as per Drg. No. Dy.CSTE/C/Kota/6 (A) & (B). | Numbers | 5.00 | 13,435.3 | 67,176.5 |
| 51 | "Supply of William stretcher nylon insulation Set suitable for ground connection for motor point operation. Each set comprising of - (RDSO Drg. No.) T- 10367-1 no.,T-10368- 2 nos., T-10371- 4 nos. and conforming to the Specification IRS: S-23 & 40/84 with latest Amendment." | Set | 6.00 | 881.98 | 5,291.88 |
| 52 | Supply of Gauge Tie plate nylon insulation as per RDSO Drg. No. (T-10372- 1 no., T- 10368- 3 nos., T-10371- 6 nos. in each set) and to the Specification IRS: S-23 & 40 with latest Amendment as applicable. | Set | 6.00 | 403.55 | 2,421.3 |
| 53 | Supply of HDPE duct 40/33 MM as per TEC GR/CDS/08-02 NOV- 04 along with following accessories (to be procured from RCIL approved sources) | Kilometre | 1.00 | 78,948.02 | 78,948.02 |
| 54 | Supply of HDPE duct 40/33 MM as per TEC GR/CDS/08-02 NOV- 04 along with following accessories (to be procured from RCIL approved sources) End plug | Numbers | 2.00 | 43.36 | 86.72 |
| 55 | Supply of HDPE duct 40/33 MM as per TEC GR/CDS/08-02 NOV- 04 along with following accessories (to be procured from RCIL approved sources) Cable sealing plug | Numbers | 1.00 | 52.5 | 52.5 |
| 56 | Supply of HDPE duct 40/33 MM as per TEC GR/CDS/08-02 NOV- 04 along with following accessories (to be procured from RCIL approved sources) Plastic coupler | Numbers | 2.00 | 52.5 | 105 |
| 57 | Supply of Double Walled Corrugated (DWC) pipe made up of High Density Poly Ethylene (HDPE) of size 103/103.5 mm inner dia and 120 mm outer dia in 6 Mtr straight length as per Britsh Standard No. BSEN 50086-1 and BSEN 50086-2-4 and BIS draft Specification Doc No. ETD 14(5071) and ETD 14(5072) along with one coupler per every 6 meters. | Metre | 2000.00 | 528.25 | 10,56,500 |
| 58 | SUPPLY OF 20 PAIR PVC CABLE 0.5MM DIA AS PER TECH.SPECN.G/WIR-06/03MARCH 2002 OR LATEST, MAKE FINOLEX, POLYCAB, BIRLA, DELTON OR HAVELLS | Metre | 500.00 | 75.1 | 37,550 |
| 59 | Supply of 2-zone amplifier as per technical spec. | Numbers | 2.00 | 22,418.47 | 44,836.94 |
| 60 | Supply of VF Tapping Transformer470:600 Ohms to RDSO Spec No.IRS.TC.22-76 or latest. | Numbers | 20.00 | 885.32 | 17,706.4 |
| 61 | Supply of fiber distributionmanagement system for 24fiber complete (48 fibrescomplete alongwith Euroadopters, pigtail) of makeBIRLA, 3M, TVS, R&M, orlatest superior make as perinstruction of site incharge. | Numbers | 2.00 | 17,211.68 | 34,423.36 |
| 62 | Supply of CAT-6 Shielded Cable. MAKE - DLink or similar reputed make. | Metre | 915.00 | 24.1 | 22,051.5 |
| 63 | Supply of power cable PVC insulated flexible 3-coremulti strand power cable of 2.5 sqmm shall conformto specification No.IS:694:1990 or latest. (OEM'scompliance to IS 694 is required along with thedelivery for the material) | Metre | 500.00 | 86.41 | 43,205 |
| 64 | Supply of VRLA fully charged battery 48 V DC /300 AH (stackable) as per IRS:S- 93/96 (A)(amd-1) or latest. | Numbers | 1.00 | 1,26,316.52 | 1,26,316.52 |
| 65 | "Supply of 48v 25Amp ( 3+1 ) FR/FC module Battery chargerRDSO/SPN/TC/23/1999 ver4.0 amd1 or latest." | Numbers | 2.00 | 1,09,128.07 | 2,18,256.14 |
| 66 | "Supply of 4 Port LAN EXTENDER 30 MBPS Fast Ethernet ON 4W/2W configurable & it should support ac and 48V DC Power Supply as per RDSO Specification No. RDSO/SPN/TC/82/2020 Rev. 2.0 or latest. Make: MROTEK/TEAM ENGINEERING/Cygnus or similar " | Pair | 2.00 | 21,417.46 | 42,834.92 |
| 67 | Supply of 32 U way U-Link panel with 32 Nos U link connector of Protel make or better. | Numbers | 20.00 | 1,947.11 | 38,942.2 |
| 68 | Supply of OFC patchcord/jumper cable of reputedmake/brand, 10 m long, with(1) FC/PC connectors on bothsides or (2) One end FC/PCconnector and other endcompatible to work with STM-4. Insp. By Consignee. | Numbers | 20.00 | 1,405.87 | 28,117.4 |
| 69 | Supply of maintenance free earth consisting as per RDSO specification No. " RDSO/SPN/197 Ver 1.0 effective from 04.07.2016" consisting of single earth pit which includes supply of 35 mm²/16 mm²/10 mm²multistrand single core PVC insulated copper cable as per IS 694 for connecting main earth electrode to MEEB in the equipment room induplicate as per manufacturers recommendations and as per RDSO specifications as follow: (Material Inspected by RITES) (a) Supply portion (b) Copper bonded steel electrode of 3.0 meters long, 17 mm diameter with copper bonding thickness of minimum 250 micronsand UL listed and marked: 1 Nos. (c)Earth enhancement compound of RDSO approved brand supplied in sealed bag of minimum 10 KG: 3Nos. (d) Copper strip of 150mm X 25mm X 6 mm to terminate earth rod:1 Nos. (e) Copper strip of 300mm X25 mm X 6 mm (MEEB): 1 Nos. (f)Copper strip of 150mm X 25 mm X 6mm (MEEB): 1 Nos. As per RDSO TAN: STS/E/TAN/3006 dated 26.06.2025 | Set | 1.00 | 26,145.4 | 26,145.4 |
| 70 | "Supply of Relay Plug-in type, Style AC- LED All aspects, AC lamp proving relay unit with inbuilt current transformer type, slow release neutral line relay, 4F/4B contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110V AC, LED signal lamp rated at 15W confirming to RDSO spec. STS/E/Reelys/AC lit LED signal/ 09- 2002, BRS:941A, IRS: S- 34 & IRS: S- 23 (as applicable). The interlocking code for this unit shall be ABDHK. Note: Base plate shall be inspected by consignee with OEM /Manufacturer testing & guarantee certificate. Item supplied should be compatible with existing system. | Numbers | 34.00 | 7,967.72 | 2,70,902.48 |
| 71 | "Supply of Tool Kit for Digital Axle Counter as given below: Tools supplied should be compatible with supplied MSDAC system for installation, day to day maintenance and adjustment of indoor and outdoor gears.a) Service test panel including meter for test of track equipment, tools for mounting and adjustment of track equipment and standard jig for drilling of holes in rail (as per manufactures specification, list to be given by manufacturer).Axle Counter Tool Kit. Each set consists of minimum following items:-i) RMS multimeter with probe (Fluke-289) or equivalent. - 1Noii).Adjustable torque wrench -1 Set . Size and dimentions should be compatible for the maintenance of supplied msdac sysytem.iii).Screw driver set including soldering iron with mains tester, Taparia / Jhalani or equivalent make: 1Setiv) Dummy Wheel. v). Marking Zig (90R, 52Kg & 60Kg Rail) - 1Set for eachvi). Extended wire socket to interface with diagnostic plug. - 1No if Applicable.vii)double ended spanner-02 No.( Size and dimentions should be compatible to use with the supplied system)., 27/32mm spanner to tighten deflector plates - 02 Nos .ix). Carry case (VIP or SAFARI or equivalent) 1 No.viii) External Combustion based Drill Machine of 750VA or above for drilling holes of correspoinding size- 1 No.Additional requirement as per manufacture specification list shall be given by contractor.No additional payment will be made for additional items." | Set | 1.00 | 71,324.58 | 71,324.58 |
| 72 | Supply of Fault analysis equipment along with necessary software required in connection with MSDAC system as per specification : HP Laptop or similar . 12th gen Core i7, 12 GB RAM, 1 TB HDD Window 11 Professional 64. or Latest | Numbers | 2.00 | 50,656.72 | 1,01,313.44 |
| 73 | Supply of Hylem Sheet resin bonded 10 mm thick , grade P3 in standard size of 1.22 X 1.22 meter as per specification IS 2036 of 1974 .OEM /authorised dealers gaurantee certificate to be submitted at the time of the supply. | Numbers | 4.00 | 4,000.59 | 16,002.36 |
| Schedule total | ₹2,27,93,814.97 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TD SIG 2026 10
ATTACHMENT
SIP-HAN_comp_1.pdf
ATTACHMENT
HANIPS_1.pdf
ATTACHMENT
TD-SIG-2026-10-UPLOAD-2_C_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].