Provide, Supply and Erection of Street Light Pole From Lal Hanuman Chokadi to MLA Office on Gandhinagar Highway of Mansa , for Mansa Nagarpalika, Mansa, Dist- Gandhinagar.

Item No Quantity (Q) Rate With 1% LC Per Amount In Rs.

Dismantling the existing pole above 6 m height with brackets, clamps,

insulators, stay from the cement concrete foundation and making the

site clear by refilling the pits with excavated materials and bringing it to

1 the ground level. including of transportation of Poles from site to section 5.00 252.50 Each

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over

the run and back filling the same and making the surface as normal 1900.00 74.74 mt

(B) If additional machinery like hammer driller or JCB use [Add]

Excavating hard rock or bituminous road (B.T.) by chiselling or using tool

and tackles for preparing pit for poles or earth plates or for laying pipes

3 & clearing the site by removing debris & making site good. 200.00 599.94 Cu mtr

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II ) with necessary

connecting accessories of same material at required depth in existing

4 trench for laying of cable. below ground / road surface for enclosing 2200.00 62.62 mt

cable (A)50 mm outer dia

Covering of cable with second class bricks or cement tiles laid cover the

cable crosswise & also on both sides with covering of 7. 5 Cm. layer of

5 sand above & below cable (16 bricks per meter) 2200.00 140.39 mt

Drilling the road without breaking the road surface (Asphalt) for laying of

cable for feeding power supply by making up to following size of holes at

6 both ends complete. (B) Up to 150 mm bore dia 700.00 616.10 mt

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated

with hot dip galvanizing as per IS 2629/ 2633/ 4759, suitable suspend

local wind speed with integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to

be erected With Suitable foundation (Included) as per details given by

7 manufacturer considering site requirement. (H) 9 Mtr. Long 70 mm Top 73.00 17276.05 No

X 155 mm bottom dia, 3 mm thickness with 260mmX260mmX16mm

base plate, 4- M24 Bolts and 750mm long J-Bolt.Approx Pole weight

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 60 x 60 x 150 cm. Deep in

below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm)

8 high upper ground level with necessary curing and finishing in approved 73.00 1652.36 No

manner. ( for 9 & 10 mtr pole)

Supplying and erecting street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class

M.S. sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm or require size pole top having sufficient fastners for

fixing the brackets and having suitable rise as per site condition as

directed and spread of 2 mtr.with suitable welded stiffener reducer and

with lock nut complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. Suitable for side entry

fitting brackets of following nos of arms. (B) Double Arm Bracket 2 Mtr.

Tender Amount

Description

Item No Quantity (Q) Rate With 1% LC Per Amount In Rs.

Supplying and erecting street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class

M.S. sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm or require size pole top having sufficient fastners for

fixing the brackets and having suitable rise as per site condition as

directed and spread of 2 mtr.with suitable welded stiffener reducer and

with lock nut complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. Suitable for side entry

fitting brackets of following nos of arms.(C) Triple Arm Bracket 2 Mtr.

Supplying and erecting street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class

M.S. sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm or require size pole top having sufficient fastners for

fixing the brackets and having suitable rise as per site condition as

directed and spread of 2 mtr.with suitable welded stiffener reducer and

with lock nut complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. Suitable for side entry

fitting brackets of following nos of arms.(D) Four Arm bracket 2 Mtr.

Supplying & erecting approved make SMC press moulded composite

FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements with mounting

12 clamp with nuts, bolts & washers suitable for erection on pole with cable 73.00 898.90 No

clamps& earth bolt of following size of box. (A) 300mm x 200mm x

Supplying and erecting Flexible PVC insulated multi strand multi core

1.1 kv grade ISI marked copper wires of following size to be erected as

13 directed. (h) 1100.00 97.97 mt

2.50 Sq.mm 3 core round PVC sheathed

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in test

14 Certificate) & having back filling compound of (B) Inner chemical (CCM 81.00 4591.46 No

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be submitted

by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

For using salt and charcoal / coke as required for pipe type earthing.

Providing and erecting HOT deep Galvanised iron strip wire 8 to

16 SWG. 73.00 77.77 Kg

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

17 necessary clamps or in existing trench / pipe of following size of 2200.00 168.67 mt

cables(C) 4 core 10 Sq. mm (No. of Pole* 30 Meters)

Tender Amount

Description

Item No Quantity (Q) Rate With 1% LC Per Amount In Rs.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

18 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & 130.00 5080.30 No

LM-80 certificates) (NOTE: Below description have shown ranges of

wattage capacity between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection.(iii) Above 60 to 89 watts Cat - III

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

19 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI 73.00 123.22 No

Supplying & erecting approved make IP 55 grade Company fabricated

Timer Panel of following capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly epoxy power painted

inside and outside with hinged doors and locking arrangement

consisting of suitable size of 4 Pole MCB and 4 pole contactor (cat-

20 III)with analog time switch, auto manual switch of same make and 8.00 13350.18 No

suitable input and output Bakelite terminals and with door earthing

approved by Engineer in charge. (B) 40 Amp

Supplying & erecting power contactor ,AC3 duty for time switch

complete erected as per direction Cat III

(D) 4 pole 440V 40 Amp.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B

curve) having 10KA breaking capacity & confirms to IS :8828 in existing

22 box having following capacity (b)40 Amp.Cat III 8.00 702.96 No

Providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

10 KA and suitable for operation on 3 phase and neutral 415V,50Hz.

having characteristic of quick action & tripping with all advance feature &

23 do not incorporate any electronic component for following Max. rating 8.00 2900.72 No

erected as directed.(ii) 40Amps. FP Cat. III

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

24 tails, insulating tape etc for following size of cables. (C) 2 to 4 core 10 292.00 38.38 Rmt

Providing and erecting Three Phase IoT GSM/GPRS Central Control &

Monitoring System (CCMS) Panel for Streetlights Smart Feeder Panel

with 3 Phase GSM/GPRS CCMS Streetlight Controller with LCD Display

(1 Nos.). Streetlight Controller with Individual each Phase Control

(Energy Saving feature) and Spare relay facility. Streetlight Controller

having 10 years of reserved battery for RTC. With 50 programmable

schedule, month-wise offset settable facility, Astronomic sunrise/sunset

time programming in-built for year long schedule. Operating Voltage @

25 440 V AC with Over Voltage & Short Circuit protection. 2 hour Battery 8.00 59323.00 No

Back-up for Streetlight Controller. Panel to have 1 Nos. of 3 Phase –

Class 1 Energy Meter for Energy & Fault monitoring on CCMS Web

Dashboard. Panel consisting of 3 Nos. of 3 Pole Contactors (3 x 18 A),

Nos. of 1 Pole Miniature Circuit Breakers (32 Amp.) for Bypass, Input /

Output supply functionalities, 1 Nos. of 4 Pole Earth leakage circuit

breaker for safety protection. Standard lock & key facility for Panel

Tender Amount

Description

Item No Quantity (Q) Rate With 1% LC Per Amount In Rs.

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts

in an approved manner.

Amount Rs.