Construction of Gym & Library at AMC Plot TP. no. 3 (Bopal) FP no 262 Bopal, Ahmedabad

Bill of Quantities

ITEM DESCRIPTION UNIT SOR RATE AMOUNT

Clearing and grubbing road land including

uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to

1 300 mm removal of stumps of trees cut Hec 0.25 34451.77

earlier and disposal of unserviceable

materials.(D) By mechanical means in area of

Barricading the entire break down or

excvated area on rental basis using wooden

ballies / M.S.angles at max. 2.00 meter centre

to centre, C.G.I. Sheet, reflective paint / Board

out side to avoid accident & for smooth

traffic diversion & movement including

2 cautionary board etc. Item also includes for Rmt 150.00 80.35

making temporary sufficient nos of lighting

arrangement through out the work with

necessary required arrangement. ..The same

shall be removed after completion of work.

(Only for break down work from start to

complete) (Based on Drainage SOR 2009-10)

Demolition of RCC work using Hydra

Breacker including stacking of servicable

materials and disposal of unservicable

materials with all lead and lift.Removal Of

Existing Building Foundation and Super

Structure If Any.

Demolition of Brick work and stone masonry

including stacking of serviceable materials

and disposal of unserviceable materials with

all lead and lift.(ii) In Cement

Mortar.Removal Of Existing Building

Foundation and Super Structure If Any.

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking of

serviceable materials and disposal of

unserviceable materials with all lead and lift.

(i) G.I.sheet roofing. Smt 5.00 47.25

(ii) A.C. sheet roofing. Smt 5.00 53.55

Dismentling steel work including

6 distempering and stacking the materials Kg. 100.00 3.63

with all lead and lift.

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including

chowkhats architraves, hold fasts and other

attachment etc. complete and stacking them

with in all lead and lift. (i)Notexceeding

Removing & Scrapping of Old deteriorated

Plaster of any thickness from Masonary /

R.C.C. member including stacking of

serviceable material & disposal of un

serviceable from site of work with all lead &

Dismentaling any type tiled of stone floors

laid in mortar including stacking of

serviceable materilas and disposal of

unserviceable materials with all lead and lift.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from

mt 3.0 m including sorting out and stacking

11 of useful materials and disposing off the Cmt 1050.00 128.52

excavated stuff upto 50 Meter lead.(A) Loose

Add extra for Disposing off the excavated

12 stuff of above items for lead of (A) 50 m to Cmt 1517.54 17.28

Add extra for Disposing off the excavated

13 stuff of above items for lead of (B) 100 m to Cmt 758.77 34.56

Providing and installing cast in situ single

under reamed piles of specified diameter and

length below pile cap, excluding the cost of

Concrete, steel reinforcement but including

14 the cost of boring with bentonite solution

and the length of the pile to be embedded in

pile cap etc. all complete. (Length of pile for

payment shall be measured upto to the

bottom of pile cap) :

400 mm dia. Piles Rmt 10.00 638.83

450 mm dia. Piles Rmt 10.00 705.03

Extra over single under ream for providing

additional bulbs in under reamed piles,

15 under specified diameter excluding the cost

of Concrete, steel reinforcement (only the

nos. of extra bulbs are to be paid).

400 mm dia. Piles Each 9.00 813.05

450 mm dia. Piles Each 10.00 1103.43

Conveyance charges of earth lime, murrum,

building rubbish, manure, garbage, sludge,

excavated rock, fly ash, aggregate of any kind

etc. comp. upto 5 km lead.

Extra For Lead Above 5 km & upto 6 km Cmt 152.00 417.67

Extra For Lead Above 6 km & upto 7 km Cmt 152.00 426.93

Extra For Lead Above 7 km & upto 8 km Cmt 152.00 436.19

Extra For Lead Above 8 km & upto 9 km Cmt 152.00 445.45

Extra For Lead Above 9 km Cmt 152.00 454.71

Filling available excavated earth (excluding

rock) in trenches. plinth, sides of foundations

17 etc. in layers not exceeding 20 cm. in depth cmt 2644.00 129.10

consolidating each disposited layer by

ramming and watering.

Filling in plinth with sand under floors

18 including watering ramming, consolidating cmt 493.00 455.63

and dressing complete

Filling in foundation and plinth with murrum

or selected soil in layers of 20cm. thickness

including watering, ramming and

consolidating etc. complete.

Filling in foundation and plinth with brick

Bats Chhara in layers of 20cm. thickness

including watering, remming and

consolidating etc. complete.

Carring out plinth treatment to post

construction /existing structure by spraying

chemical solution for termite control

treatment including labour and material

consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

21 6131_paret-II Consentration Weight one Smt 910.00 104.90

percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1%

concrentration inclusive of one litre

chemical emulsion appication at the rate of

Litre chemical /Sqm of sur face is

recommended as per I.S

Providing and laying cement concrete 1:3:6

(1-Cement:3-coarsesand:6-hand broken

22 stone aggregates 40mm nominal size)and Cum 409.00 2976.00

curing complete excluding cost of formwork

in (A) Foundation and Plinth.

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete work

in (A) Foundations, footings, Base of columns

and Mass concrete.

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

24 reinforcement for reinforced concrete work Cum 8.00 4496.07

in © Slabs,landing,shelves,Balconies, Lintels,

Beams, Girders and Cantilever upto floor two

level. : Plinth Beam

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete work

in (D) Columns, Pillars posts and struts, upto

floor two level. :

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

26 reinforcement for reinforced concrete work Cum 8.00 4460.36

in © Slabs,landing,shelves,Balconies Lintels,

Beams, Girders and Cantilever upto floor two

Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete work

in (B) Walls, from top of foundation level

upto floor two level

Providing and laying in position Ready Mixed

M250 grade concrete for reinforced cement

conctere work , using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to

site of work in transit mixer for all lead

having continuous agitated mixer,

manufactured as per mix design of specified

grade for reinforced cement concrete work

including pumping of R.M.C. from transit

mixer to site of laying with all lead and lift,

excluding the cost of centering shuttering

finishing and reinforcement including cost of

admixtures in recommended proportions as

per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without

impairing strength and durability as per

direction of the Engineer - in charge. Without

Fly Ash (Min cement level as per latest IS

shall be maintained) (Cement level 450 kg )

Providing and laying in position Ready Mixed

M- 300 grade concrete for reinforced cement

conctere work , using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to

site of work in transit mixer for a lead up to

10 kms having continuous agitated mixer,

manufactured as per mix design of specified

grade for reinforced cement concrete work

including pumping of R.M.C. from transit

mixer to site of laying, excluding the cost of

centering shuttering finishing and

reinforcement including cost of admixtures

in recommended proportions as per IS:

to accelerate/ retard setting of concrete,

improve workability without impairing

strength and durability as per direction of

the Engineer - in - charge. Without Fly Ash

(Min cement level as per latest IS 456 shall be

maintained) (Cement level 475 kg )

Providing and laying in position Ready Mixed

M- 350 grade concrete for reinforced cement

conctere work , using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to

site of work in transit mixer for a lead up to

10 kms having continuous agitated mixer,

manufactured as per mix design of specified

grade for reinforced cement concrete work

including pumping of R.M.C. from transit

mixer to site of laying, excluding the cost of

centering shuttering finishing and

reinforcement including cost of admixtures

in recommended proportions as per IS:

to accelerate/ retard setting of concrete,

improve workability without impairing

strength and durability as per direction of

the Engineer - in - charge. Without Fly

Ash(Min cement level as per latest IS

shall be maintained) (Cement level 500 kg )

Drilling suitable holes in reinforced or plain

cement concrete with power driven drill

machine to a minimum depth of 80mm upto

250mm in RCC beams, lintels, columns and

slabs to introduce steel bars for

sunshades/balconies including fixing the

steel bars in position using Hilti Chemical

HY200-R but excluding the cost of

reinforcement, all complete as per direction

of Engineer-In-Charge.

8 mm Dia in 80 mm Deep & 12 mm Dia

10 mm Dia in 100 mm Deep & 14 mm Dia

12 mm Dia in 120 mm Deep & 16 mm Dia

16 mm Dia in 160 mm Deep & 20 mm Dia

20 mm Dia in 200 mm Deep & 25 mm Dia

25 mm Dia in 250 mm Deep & 32 mm Dia

Providing TMT Bar FE 500D reinforcement

for R.C.C.Bwork including bending, binding

and placing in position complete upto floor

Providing TMT Bar FE 500D reinforcement

for R.C.C.Bwork including bending, binding

and placing in position complete upto floor

Providing TMT Bar FE 500D reinforcement

for R.C.C.Bwork including bending, binding

and placing in position complete upto floor

Providing formwork of ordinary timber

planking so as to give a rough finish including

centering shuttering strutting and propping

etc. Height of propping and centering below

35 supporting floor to ceiling not exceeding 4 M. Smt 470.00 171.68

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (A) Foundations Footings Bases of

Columns etc. and Mass concrete.

Providing formwork of ordinary timber

planking so as to give a rough finish including

centering shuttering strutting and propping

etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (B) Flat surfaces such as soffits of

supspened floors slabs Landings and the like.

(1) Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber

planking so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

37 supporting floor to ceiling not exceeding 4 M. Smt 839.00 297.68

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (G) Columns PillarsPosts and struts. (1)

Square Rectangular Polygonal in plan.

Providing formwork of ordinary timber

planking so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (H) (2) Sides and soffits of Beams Beam

Haunchings canti-levers Girders Bressumers

and Lintels exceeding 1M.in Depth.

Providing formwork of ordinary timber

planking so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

39 and removal of the same for in situ Smt 171.00 229.85

reinforced concrete and plain concrete work

in. (C) Vertical surface such as walls (any

thickness) partitions and the like including

attached buttresses & string course & the

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting and

propping etc. height of propping and

40 centering below supporting floor to ceiling Smt 31.00 67.73

not exceeding 4 M. and removal of the same

for in situ reinforced concrete and plain

concrete work in. (I) Edges of slabs and

Breaks in floors and walls.

Brick work using common burnt clay

building bricks having crushing strength not

41 less than 35 kg./Sq.Cm. in foundation and Cum 160.00 4011.66

plinth in Cement Mortar 1:5. (1- Cement : 5 -

fine sand)(B)Conventional

Brick work using common burnt clay

building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -

fine sand)(B) Conventional

Extra for brick work in superstructure above

plinth level upto floor two level (B)

Conventional : Ground Floor + First Floor

Brick work using common burnt clay

building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -

fine sand)(B) Conventional

Extra for brick work in superstructure above

plinth level upto floor two level (B)

Conventional : Secound Floor

(i) Half brick masonry in common brunt clay

building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1- Cement : 4 -coarse sand ) in foundation

and plinth (B) Conventional Extra for half

brick masonry in superstructure above

plinth level upto floor two level. (B)

Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of single

or half brick walls for interior plastering

upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement

Providing 10mm thick cement plaster in

single coat on brick/concrete walls for

interior plastering upto floor two level and

finished even and smooth in (ii) Cement

mortar 1:4 (1- cement :4-sand)

Extra over items 58 to 71 for plastering on

ceilings and sofits of stairs upto floor two

level instead of plastering on walls

20 mm thick sand faced cement plaster on

walls upto height 10 metres above ground

level consisting of 12 mm thick backing coat

of C.M.1:3 (1-cement:3-sand) and 8mm thick

finishing coat of C.M.1:1(1-cement:1-sand)

Providing 20 mm thick water proof cement

plaster using water proofing powder

1Kg/1bag of cement for all floors on brick /

concrete wall work using water proofing

materials in C M 1: 4 ( 1 cement 4 coasrse

sand) including finishing with a flooting coat

48 of neat cement slurry etc complete for all Smt 86.00 249.00

floor. and shall be guaranteed for minimum

period of 10 years after handing over the

completed building by the main contractor to

be finished as directed. Stamp paper

guarantee 10 years to be furnished before

receiving any payment from the client

Providing & applying of Natura Texture

Coating System made from 100% natural

grains and granules and premium acrylic

resin, silicon and other additives to bind and

protect to external walls, columns etc. of

49 approved made, shade, design & pattern. Smt 50.00 681.00

Application: (i) 1st coat of primer based on

acrylic resin which helps the texture material

to bind properly with base coat. (ii) 2nd coat

of texture material of natural stone grains

and granules which is based on premium

acrylic resin, silicon, other additives and

preservatives. (iii) 3rd coat is clear coat of

acrylic and silicon which provide surface an

extra strength and protect against water fall,

provide UV resistency as directed by

Engineer-in-charge.

Providing cement vata (10cm. x 10 cm. size)

quarter round in cement mortar 1:1

including neat cement finishing, watering

Applying two coats of putty & two coats of

primer of approved brand and manufacture

on new wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other foreign

matter and sand papered smooth.

Wall painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall surface to

52 give an even shade including throughly Smt 8743.00 78.40

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove

all dirt, and remains of loose powdered

materials.etc complete

Providing and laying Ceramic tiles 6mm

thick in flooring treads of steps and landing

54 laid on a bed of 12mm thick cement mortar Smt 241.00 960.47

1:3 (1-cement : 3- coarse sand ) finishing

with flush pointing in white cement.

P & L 24" x 24" vitrified 8 mm thick tile

flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring

by adhesive material including dismentaling

of existing flooring and jointed with color

cement slurry including finised with flush

pointing & cleaning the surface etc. complete

P&L 24"x24" vitrified 8mm thick tile flooring

over 20mm (average) base of cement mortar

1:6 (1cement :6 coarse sand) on new surface

56 or fixing one xisting flooring by adhesive Smt 40.00 1383.99

material including dismentaling of existing

flooring and jointed with color cement slurry

including finised with flush pointing &

cleaning the surface etc.complete for

Providing and laying white glazed tiles 6mm

thick in skrting risers of steps and dedo on

57 mm thick cement plaster 1:3(1-cement :3- Smt 630.00 1044.23

coarse sand)and jointed with white cement

Providing and fixing Min. 0.60 meter wide

sandwich type platform including supplying

and fixing granite stone 18 mm thick mirror

polished stones in top and side position and

vertical strip at front over 25 mm thick

58 polished kota stone platform fixing in top Smt 7.00 7350.80

and sides and intermediates supports fixing

with cement mortar and adhesive and

finishing including making recess for

Kitchen/ Laboratory sink etc. complete as

approved and directed by Consultant / EIC.

Providing and laying polished Kota stone

slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5

- coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match

the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Providing and laying Granite slab (18 mm

thick) one side polished flooring over 20 mm

(average) base of cement mortar 1:6 (1

cement : 6 coarse sand) or L.M 1:1.5 laid and

jointed with grey cement slurry including

rubbing and polishing complete.

Providing and laying 18 mm thick polished

granite stone machine cut in single piece

(Max. available) in sill and jambs of door

,window,ventilation & lift wall

cladding,staircase flooring landing, risers &

treads, skirting laid over 10 mm thick

61 cement mortar 1 : 3 (1 cement : 3 coarse Smt 141.00 3279.00

sand) and jointed with grey cement slurry

with matching pigment incl. rubbing and

polishing,half rounding edge and incl. fixing

of hilty fastener at every 1/3 span of sill as

required size etc. complete colour and shed

as approved by architect engineer in charge.

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc.

with M.S. flats at required spacings and

frame alround, square or round bars with

round headed bolts and nuts or by screws

(A) Plain Grill.

Providing and fixing standared extruded of

alluminium section of size 63mmx 38.10 mm

x 1.2mm @Wt.0.643Kg /mt with colour

anodized alluminium frame for ventilation

with 5mm thick frosted glassas details etc

complete for Ventilation.

Providing and fixing window having

extruded aluminum Colour Powder Coated

section frame main outer size 63.50 x

x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal

two track member size 61.85 mm x

mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x

mm @ wt.of 0.0.659 Kg/mt with sliding

64 shutters of horizontal member size 40mm x Smt 274.00 1688.78

vertical member of size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt with 5 mm

thick transparent bronze colour tinted float

glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

complete for window

Providing and fixing single or double flush

door both sides laminated and I.T.W. beading

all around by using I.T.W. frame 120 m.m. x

80m.m.. shutter fabricated from 35 mm thick

solid core malemine faced three layered pre

laminated flat pressed wood based exterior

grade bonded BWP/BWR synthetic resin

65 having stamped IS 12823 grade I type II Smt 41.00 3847.39

including three coats of lacquer polishing to

exposed wooden surfaces and Stainless steel

decorative type designs fixtures / fastening

etc.including I.T.W. triangular batten patti of

size 30m.m.x30m.m.etc. as per architectural

detailed drawing and as directed by engineer

Providing and fixing FRP frame size

125x65mm and 35 mm thick FRP shutter

with wood grain raised pannel edde sign

finish shutter having extra reinforcement on

sides & edges in Gel coat finish. The core of

the shutter & frame is to be filed up with

injected polyurethene foam done in situa

long with embedded wooden pieces for

stiffening & also taking hinges & fintures. The

whole FRP frame &shutter is to be water

proof weathe rproof ,termite proof &

resistance to mild acid/alkali. Rate sare to be

inclusive of S.Shinges with fastener sleeve &

alluminium fixtures & fastenings.

Providing & Laying P21(water reducing

concrete admixture at 100 ml per bag of

cement & recon 3 s fiber at 125 gm per bag of

cement including making C channel 75 x

mm required to maintain level,slope and

67 thickness of the concrete road leveling of Smt 1450.00 175.00

placed concrete with surface vibrator and

finishing with power floater & trowel light

brooming the surface & including cutting &

filling of expansion joint as directed by

Engineer in charge.

Providing, laying, spreading and compacting

Wet Mix Macadam (as per table 400 - 10 and

400 - 11) of well graded stone aggregate to

specification including premixing the

Material with water at OMC in mechanical

mix plant as per approved design mix,

carriage of mixed material by Tipper to site,

laying in uniform layers with motor

grade/Front end Loader/paver finisher, in

sub base/base course on a well prepared

under base and compacting with vibratory

roller to achieve the desired density

including lighting, guarding, barricating and

maintenance of diversion etc. (MoRTH

specification : Clause 406) by mechanical

Providing and laying rubble soling, 23 cm

thick, in a compact manner, foudation, road,

footpath etc. using 200 to 230 mm. cut size

stones, covering and levelling the surface

with a layer of murrum after filling the voids

with smaller sized stones or stone chips,

including watering, ramming well and

consolidating each layer, as directed.

Providing and fixing pre-cast concrete kerb

stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of

70 M250 grade concret as per approved design Rmt 250.00 358.06

and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and fixing pre-cast Rubber Dye /

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

71 per approved design Confirming to IS 15658 Smt 650.00 680.10

: 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in

proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete.

Providing and laying of Hot applied

thermoplastic compound 2.5 mm thick

including reflectorizing glass beads and

gms per Sq.m. area thickness of 2.5 mm is

exclusive of surface applied glass beads as

per IRC-35 2015. The finished surface to be

level/uniform and free from streaks and

holes or chipping of Thermoplastic if any and

including primer coat for C.C. surface and

A.C.C. surface, in white and/or yellow colour.

72 Rate includes brushing, blooming and Smt 75.00 552.00

cleaning and application of paint. Zebra

patta/Bump patta/Lane line/Center line/Cut

patta, Directional Arrow, Lettering MoRT&H

Clauses 803 &Volume II Part III and IRC 35-

2015.Rate shall include brushing, brooming,

painting and repainting of worn out paint

after a period of 2.5 years.

Note:-As per drawings and design supplied

by architect and instruction given by

authority and E.I.C.

Providing and laying waterproofing

treatment for terrace including applying neat

cement slurry 2.75 kg/sq.mt. of cement

admix with waterproofing compound after

cleaning the surface. (b) laying cement

concrete using brick bats 25 to 100 mm size

with 50% cement mortar 1:5 (1-cement : 5-

coarse sand) admixed with waterproofing

compound over 20 mm thick layer of C.M.1:5

to require slope including rounding of

junction or walls and slabs (c) after two days

of proper curing applying a second coat of

cement slurry. (d) finishing the surface with

20 mm thick cement mortar 1:4 and finally

finishing the surface with trowel As directed

with cement slurry. (e) after finishing the

whole terrace shall be flooded with water for

a period of two weeks.

Providing and laying broken chine mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

74 tempered to bring mortar creme out upto Smt 909.00 739.89

surface using white cement including

rounding off junctions and extending them

upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

Structural steel work ( Confirming to IS

4923-1997) riveted, bolted or welded in

builtup for all type sections, in framed work,

including cutting, hoisting, fixing in position

and applying a priming coat of approved

steel primer all complete as per the

structural designs and directions of Engineer

in charge.Column ( 122 x 61 x 3.6mm )

Painting one coats (excluding priming coat)

on previously printed steel and other metal

with synthetic enamel paint, brushing to give

an even shade including cleaning the surface

of all dirt, dust and other foreign matter.

Providing and fixing rolling shutters of

approved make made of 80 mm wide M.S.

laths inter-locked together through their

entire length and jointed together at the ends

by end locks mounted on specially designed

77 pipe shaft with bracket plates, guide Smt 10.00 3468.72

channels and arragements for inside and

outside locking with push-pull operation

including the cost of hood cover and spring

etc. complete.(A) Shutters having width

Providing and laying cement concrete

flooring 1:2:4 (1-cement : 2-coarse sand : 4-

78 graded stone aggregate 20mm nominal size) Smt 10.00 348.08

laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

Providing & Fixing in Position Vertical Roller

Blinds with Minimum 3 % and Maximum 5 %

Light Transperace Screen Fabric Incuding

Providing & Fixing of Powder coated G-

Channel at the Topof Window with necessary

Screw , Cleats etc. and PVC Roller ( Weight

Pipe) and PVC Chain For Up and Down

79 Movement of Blinds etc. of Approved Make Smt 1372.03 50.00

and as per Drawings / Instruction of Engg. in

Charge For All Colors and Shades. Rates

Includes all Lead and Lift For All Floor Level,

All Height , All Material , Accessories, Fixing

Scaffolding , Labor etc. Complete in All

Respects. All Required Accessories &

Material must be From Same Manufacturer.

Providing & Fixing Sun Control Reflective

Type Film / Frosted Film as Selected by

Architect/ Engg. In Charge For Glass Doors /

Windows etc. as Directed.

Providing and fixing eco-friendly light

weight calcium silicate false ceiling tiles

having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S.

476 part IV, 100% humidity resistance and

also having thermal conductivity0.043° w/m

KC.for the best thermal Insulation . The Light

weight calcium Silicate tile shall be of

approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 &

Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on

true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’

runner suitably spaced at joints to get

required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of

size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm centre to

centre to form agrid of 1200X600mm and

secondary cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle

of the 1200X600mm panel to form grid of

size 600X600mm resting on

Providing & Fixing POP False ceiling as per

design and instructure bt consltatnt and as

82 per drawings, Make all necessary fixings Sqmtr 100.00 950.00

fittings and materials. etc complete as

directed by the site-incharge.

Providing and applying approved coloured

chips 20mm thick STONE CREAT PLASTER

for exterior / interior side on wall up to full

height from ground level consisting of 12mm

thick backing coat of CM 1:3 (1 cement :

Bodeli sand) and 8mm thick finishing coat of

CM 1:1 (1 cement (Grey / White / Colour :

83 stone grit (approved coloured chips)) Sqmtr 100.00 667.78

including providing & fixing 300mm wide

strip of chicken net at vertical and horizontal

joints of RCC and masonary including 10mm

alluminium channel for expantion joint /

grooves, curing, necessary scaffolding in true

line and level etc. complete as directed by

Providing & Fixing the Chikenmesh -

guage(Crimp Jali) of approved size applying

between the RCC and masonry junction in

proper line, level and plumb with all

material, labour, tools, tackles and

equipment. Including providing and fixing

the jali with nails, etc complete as directed by

the site-incharge.

Fabricating, supplying and fixing in position

SS railing for staircase and balcony with

brush finish and 304 grade as per

85 IndianStandrd and detailed drawing RMT 21.60 3737.00

including grinding, cleaning and filling the

welded spots with SS finish (Only Length will

be paid forpayment heigth max.1.0 mt.)

Providing corrugated G.I. sheet of class-3

roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with

86 bitumen and G.I. limpet washer or G.I. limpet sqm 125.00 719.93

washer. filled with white lead complete

excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.

Providing and fixing 1.20 Metre high fencing

with 2.0 Metre long M.S. Angle posts 40mm x

40 mm x6 mm and oil painting 3 coats fixed

at 2.5 Mt,C/c. with five Horizontan lines and

two diagonals of galvanised steel barbed

wire weighting 9.38 Kg. per 100 Metre,

strained and fixed to posts with G.I,staples

including fixing the postsin ground with

M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

ACCOUSTIC WALL-Providing and fixing full

height partition up to slab level including

above the false ceiling height. Partition

framework using 50mm x 38mm x 1.5 mm

thick extruded aluminium box section (as

per IS Standards of Jindal / Hindal / Banco /

Windalco make) framework at spacing not

exceeding 600mm C/C both ways

(horizontal and vertical) framework formed

using 50mm x 38mm x 1.5mm thick extruded

aluminium box-section connected using

50mm X 50mm X 1.5mm thick "L" angle

support cleats fixed with 12mm galvanized

metal screws. Partition framework to be

secured to the floor, structural support and

nearest structural member using galvanized

metal screws and wooden dowels. The

partition is to be completed with 12 mm

thick calcium silicate board with acrylic

emulsion paint finish as per groove pattern

as per the design on one side while on the

other side, the partition shall be finished

with 8 mm thick plywood on which 25 mm

thick acoustic panel using PolySlatAcoustic

Panel make Slats L-27 of size 400 MM X

MM X 21 MM thick with the specification:-

Slats L-27mm @12mm, high-grade Pine

wood base Medium Density Fiber acoustic

boards with Tongue & Groove Edge, The

acoustic should be furnished with a Marco

polyester fibre acoustic panel backing with

NRC: should be Up to 0.90, should meet the

safety requirements of EN 14190. Then

fixing Rock wool of 50 kg density and 50 MM

Thick Fixing: -GI stud of size 48 X 34 X 36 X

3660 fixed vertical to wall at every 600mm

c/c and floor of size 50 X 32 X 0.5 X

fixed Horizontally with the help of noggin

channel which is screw fixed directly to the

wall where ever required with Clip approved

by Architect and as specified including all

accessories, material & labor complete as

directed by Architect / Engineer – in –

charge. Make: Ecotone/Armstrong/Decibel

Control/ Hunter Douglas. Required

holes/face plate for conduit pipes of

electrical / networking cables and other

services provided is included in the rates. In

case wood is used at any place due to

constraint, it must be finished with duco

colour or polish matching with laminate. All

are to be completed as per the architectural

drawing. The rate shall include necessary

approved hardware items including all

materials and labour etc. complete as per the

detailed instruction of the engineer-in-

charge and consultant.

Providing and laying and fixing 25 mm thick

expansion joint by hydro cell semi rigid UV

resistance with high performance laminated

closed cell polythene foam joint filler in sheet

foam as directed, etc. complete. Items for all

floors, lead, lift and any height

LAYING OUT LAWN – After excavating soil

upto 30 cm. depth & removing unwanted

stuff, stones etc. Preparing soil for planting

90 by supplying and mixing 6 inch river fine site Smt 950.00 85.00

and 0.5 cmt FYM maximum 100 sqmt of lawn

area and doing termicide @ 1 fit / 100 sqmt

area and planting selection 1 type /

approved lawn grass at maximum 6 cm x

cm distance and maintain it upto 120 days.

Maintainance include all operations i.e.

watering, grass cutting, gap filling, applying

of fertizer if require etc.

Supplying, Spreading and leveling of good

earth like firtile soil as directed etc compt.

Supplying, Spreading and leveling of good

92 quality river Kap Filling 100 mm as directed Cmt. 250.00 575.00

RAISING HEDGE : After excavating soil upto

30cm depth & removing unwanted stuff,

stones etc.Preparing soil for planting by

supplying and mixing fertile river soil layer

up to 15 cm. Excavating pits of required size

and providing cutting of cleredendron

(kadavi mehndi) having height of 1 to 1.5 ft

and bag size is 6 inch x 8 inch and planting as

directed & maintaining till well established

etc. complete (about 45 days )

Supply and Planting saplings of Ficus panda,

Ficus benjamina, Ficus benjamina

variegated, Ficus longisland bag size is

94 inch x 13 inch, well branched, well Nos 75.00 150.00

established & free from disease at site as per

the instructions

Supply and Planting saplings of (Jasud,

Ixora, Ticoma Gaudi-chaudi, Gultora,

Jetropha, Haemeliya, Chandani, Mogaro,

Galfemia, , Allamenda, Desi Gulab, Euphorbia

mili, Jasud Hybrid, Chandani double,

95 Madhukamini, Madhumalti, Ticoma Nos 75.00 85.00

Capensis, Ixora draft, Nikadevia, English

Karen etc.) having height of minimum

to 2.5 ft. and bag size is 8 inch x 10 inch, well

branched, well established & free from

disease at site as per the instructions.

Supply and Planting saplings of Golden

Bamboo having height of minimum 5 to 6 ft.

96 and bag size is 8 inch x 10 inch, well Nos 75.00 45.00

branched, well established & free from

disease at site as per the instructions.

Supply and Planting saplings of Palm(Botal

palm,foxtel) having height of minimum

97 10.00 to 12.00 ft. and bag size is 21 inch x 21 Nos 75.00 3500.00

inch, well branched, well established & free

from disease at site as per the instructions

Supply and Planting saplings of champa

98 (deshi) having height of minimum 8 to 10 Nos 100.00 450.00

ft. and bag size is 15 inch x 16 inch, well

branched, well established & free from

disease at site as per the instructions.

Supply, Spreading and leveling of Brick dust

(Chharu) particle size having maximum

Supply Saplings and Planting of trees

species as specified ( Alstonia scholaris,

Erythrina indica, Jacaranda

mimosifolia,Delonix regia , Anthocephalus

cadamba, Spathodea companulata,Neem

(Azadirachta indica), Lagerstromia speciosa

, Tabebuia argentea, Cordia sebestena,

Mimusops elengi, Bauhinia blakeana, Kigelia

pinnata, Cassia fistula, Banyan, Ficus

religiosa, Peltophoroum, Bottle brush, Silver

Oak, Billi, Mahagony, Pendula, Desi

Asopalav,Sevan, Badam, Ficus infectoria,

Pinkesiya, Millingtonia hotensis, Rain Tree,

Bakm limdi, kasid, Ashok tree, parkia,

Tabebuia Rosea, millettia, etc.) having height

of minimum 7.00 to 8.0 ft. and bag size is

inch x 13 inch, well branched, well

established & free from disease at site as per

the instructions.

Supplying insecticides at site well packed in

bottle of 20 litre. weight including royalty

and carriage with all leads and lifts (product

to be brought in company sealed packing

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5)

100 PIPE having National Sanitation Foundation (NSF) seal for

Rmt potable water165.21

dia. nominal bore tube fittings and clamps including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

101 seal for potable water of following dia. Rmt 450.00 202.97

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5) PIPE

102 having National Sanitation Foundation (NSF) Rmt 450.00 247.25

seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

103 seal for potable water of following dia. Rmt 550.00 330.37

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete. [D] 32mm.

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

104 seal for potable water of following dia. Rmt 200.00 437.66

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete. [E] 40mm.

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

105 seal for potable water of following dia. Rmt 300.00 647.30

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete. [F] 50mm.

Supplying & erecting resin bonded flap rock

wool / glass wool with conductivity valve

1.67 sq.mm per watt & to with stand the

temp. to 100 degree centigrade C thickness

50mm with G I pipe of following size dia "B"

class as per IS:1239. The plastic sheet to be

used as covering of glass wool. Al. cladding

besides other materials like chicken mesh,

26 G Al. Sheet shall be used for cladding the

insulation pipe.

(A) for 20 mm dia pipe Mtr 50.00 360.00

(B) For 25 mm dia pipe Mtr 25.00 440.00

(C) for 32 mm dia pipe Mtr 25.00 530.00

(D) for 40 mm dia pipe Mtr 50.00 620.00

(E) for 50 mm dia pipe Mtr 10.00 760.00

Providing and fixing Gun metal check or non-

return fullway wheel valve.(C) 20mm dia.

Providing and fixing Gun metal check or non-

return fullway wheel valve.(C) 25mm dia.

Providing and fixing Gun metal check or non-

return fullway wheel valve.(E) 40mm dia.

Providing and fixing Gun metal check or non-

return fullway wheel valve.(E) 50mm dia.

Providing and supplying C.I. Air valves of

approved make & quality of following class

and diameter including taxes, insurance,

transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores, stacking

etc. complete. Air Valves single (S2) Type

Providing and fixing mosquito proof

stainless steel overflow grating for

Audco/Lehry/ R.B./ Spirex) 100mm dia.

Consruction of Valves chambers in brick or

bela stone masonry, locally available in C.M.

1:6 foundation concrete 150mm thick in CC

1:4:8 of trap metal size 25mm to 40mm thick,

inside cement plaster in CM 1:3 and cement

pointing outside in C.M. 1:3 and top cover of

precast RCC slab 100mm thick with key hole

in two parts, each with handles or MS Bar etc.

complete as given size) Upto 1 Mt. depth

113 from G.L. to pipe invert level incl. complete Each 10.00 5380.00

civil works but excl. cost of excavation and

refilling with cast in situ RCC slab in one

single piece with fixing of CI-MH Frame and

cover (excl cost of CI-MH Frame and cover)

with 23mm thick brick masonry wall in CM

1:6 (d) size of chamber 0.60 m x 0.60m and

1.0mt deep with precast slab in two parts

15mm with single piece 10cm with fixing MH

Supply, installation, Testing and

Commissioning of 15mm Nominal diameter

Garden Hydrant with gun metal Ball Valve, GI

pipe for Flexible hose Connection Provision

all required accessories etc.

Providing erecting and fixing double coated

Syntex PVC. (ISI) water tank of required

capacity each with all necessary fittings and

connection etc. complete on terrace.

Supplying and erecting chromium plated heavy

116 duty brass valve for inlet pipe of water heater 15 Nos 50.00 180.00

Supplying and erecting 15mm brass non-

117 return valve for inlet pipe of storage water Nos 50.00 230.00

Supplying and erecting dead pressure

118 releasing valve for storage type water heater Nos 25.00 380.00

with necessary materials.

Providing & erecting fibre reinforced PVC

flexible pipe with brass locking nuts & washers &

clips at both ends complete erected without

INTERNAL SWR SYSTEM

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

120 densidy, complete with special falnge Rmt 500.00 100.49

compression type fittings, wall clipsetc.

including making good the wall ceiling and

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

121 densidy, complete with special falnge Rmt 600.00 116.40

compression type fittings, wall clipsetc.

including making good the wall ceiling and

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

122 densidy, complete with special falnge Rmt 350.00 124.43

compression type fittings, wall clipsetc.

including making good the wall ceiling and

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

123 densidy, complete with special falnge Rmt 600.00 332.91

compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure polythene

pipes of the following outside Dia. Low

124 densidy, complete with special falnge Rmt 500.00 274.68

compression type fittings, wall clipsetc.

including making good the wall ceiling and

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 100 mm diameter with jali

of the following nominal diameter of self

cleansing design with C.I scread down or

hinged grating including the cost of cutting

and making good the walls.

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 75 mm diameter with jali of

the following nominal diameter of self

cleansing design with C.I scread down or

hinged grating including the cost of cutting

and making good the walls.

EXTERNAL SWR SYSTEM

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water

tight C.I. cover with frame of 300mm x

300mm size (inside) with standard

weight.(i) Square mouth traps. (A) 100mm

x 100mm size P type. (upto 10 ton)

Providing & Supplying of Class SN8

structured wall Polythelene piping systems

(Pipe with online/offline coupler and

elastomeric sealing ring) with non-smooth

External Annular corrugated and smooth

internal surfaces (Double Wall) for non

128 pressure underground Sewerage & Drainage Rmt 100.00 208.00

application as per EN:13476-3 incuding all

local and central taxes, transportation,

freight charges, octroi, inspection charges,

loading, unloading, conveyance to the

departmental stores etc. complete (ID Dia).

Pipe Dia. ID 100mm

Providing & Supplying of Class SN8

structured wall Polythelene piping systems

(Pipe with online/offline coupler and

elastomeric sealing ring) with non-smooth

External Annular corrugated and smooth

internal surfaces (Double Wall) for non

129 pressure underground Sewerage & Drainage Rmt 100.00 373.00

application as per EN:13476-3 incuding all

local and central taxes, transportation,

freight charges, octroi, inspection charges,

loading, unloading, conveyance to the

departmental stores etc. complete (ID Dia).

Pipe Dia. ID 150mm

Providing & Supplying of Class SN8

structured wall Polythelene piping systems

(Pipe with online/offline coupler and

elastomeric sealing ring) with non-smooth

External Annular corrugated and smooth

internal surfaces (Double Wall) for non

130 pressure underground Sewerage & Drainage Rmt 100.00 738.00

application as per EN:13476-3 incuding all

local and central taxes, transportation,

freight charges, octroi, inspection charges,

loading, unloading, conveyance to the

departmental stores etc. complete (ID Dia).

Pipe Dia. ID 200mm

Providing & Supplying of Class SN8

structured wall Polythelene piping systems

(Pipe with online/offline coupler and

elastomeric sealing ring) with non-smooth

External Annular corrugated and smooth

internal surfaces (Double Wall) for non

131 pressure underground Sewerage & Drainage Rmt 100.00 1004.00

application as per EN:13476-3 incuding all

local and central taxes, transportation,

freight charges, octroi, inspection charges,

loading, unloading, conveyance to the

departmental stores etc. complete (ID Dia).

Pipe Dia. ID 250mm

Constructing Manhole with R.C.C. top slab in

1:2:4 mix (1-cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size)

foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement

Mortar 1:5 (1-Cement : 5-coarse sand)

finished with a floating coat of neat cement

and making channels in cement concrete

1:2:4 mix (1-Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size) finished

132 smooth complete including curing and Each 4.00 10920.76

festing (i) Inside size 900mm x 1200mm and

1.5M. deep including C.I. cover with frame

size 560mm diameter total weight of cover

and frame to be not less than 128 kgs. (Wt. of

cover 64 Kg. and Wt. of frame 64 Kg.)(A)

With 230mm thick walls of brick msonry

using brick having crushing strength not

less than 35Kg. / Sq.cm. in Cement Mortar

1:5 (1- Cement: 5-Coarse sand) (1) A type

depth 0.90 Metre for 150mm diameter

Constructing Manhole with R.C.C. top slab in

1:2:4 mix (1-cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size)

foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement

Mortar 1:5 (1-Cement : 5-coarse sand)

finished with a floating coat of neat cement

and making channels in cement concrete

1:2:4 mix (1-Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size) finished

smooth complete including curing and

festing (i) Inside size 900mm x 1200mm and

1.5M. deep including C.I. cover with frame

size 560mm diameter total weight of cover

and frame to be not less than 128 kgs. (Wt. of

cover 64 Kg. and Wt. of frame 64 Kg.)(A)

With 230mm thick walls of brick msonry

using brick having crushing strength not

less than 35Kg. / Sq.cm. in Cement Mortar

1:5 (1- Cement: 5-Coarse sand) (2) B type

depth 1.50 Metre for 150mm diameter

Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone

aggregate 40mm nominal size) bedding for

134 stoneware pipes of following internal Rmt 80.00 211.59

diameters with necessary formwork and

curing complete.(B) 150mm dia. (166mm

Ave. bed thickness)

Constructing brick masonry chamber for

underground C.I. Inspection chamber and

bends with briocks having croshing strength

not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of cover

23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

135 slabe with 1:2:4 mix (1-cement :2- coarse Each 2.00 2903.89

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm and

450mm deep for single pipe line. (upto

Providing and fixing G.I. Rain water spout of

50mm dia. and 30cm. length.

Constructing Brick masonry road gully

chamber 500mm x 450mm x 600mm

including 500mm x 450mm C.I. horizontal

grating wih frame complete.(upto 10 ton)

Constructing brick masonry road gully

chamber 1100mm x 775mm including

138 500mm x 450mm (C.I. horizontal grating No. 2.00 1997.20

with frame and vertical grating complete.)

Providing & Supplying of Class SN8

structured wall Polythelene piping systems

(Pipe with online/offline coupler and

elastomeric sealing ring) with non-smooth

External Annular corrugated and smooth

internal surfaces (Double Wall) for non

139 pressure underground Sewerage & Drainage Rmt 75.00 208.00

application as per EN:13476-3 incuding all

local and central taxes, transportation,

freight charges, octroi, inspection charges,

loading, unloading, conveyance to the

departmental stores etc. complete (ID Dia).

Pipe Dia. ID 100mm

Providing & Supplying of Class SN8

structured wall Polythelene piping systems

(Pipe with online/offline coupler and

elastomeric sealing ring) with non-smooth

External Annular corrugated and smooth

internal surfaces (Double Wall) for non

140 pressure underground Sewerage & Drainage Rmt 80.00 373.00

application as per EN:13476-3 incuding all

local and central taxes, transportation,

freight charges, octroi, inspection charges,

loading, unloading, conveyance to the

departmental stores etc. complete (ID Dia).

Pipe Dia. ID 150mm

Providing & Supplying of Class SN8

structured wall Polythelene piping systems

(Pipe with online/offline coupler and

elastomeric sealing ring) with non-smooth

External Annular corrugated and smooth

internal surfaces (Double Wall) for non

141 pressure underground Sewerage & Drainage Rmt 80.00 738.00

application as per EN:13476-3 incuding all

local and central taxes, transportation,

freight charges, octroi, inspection charges,

loading, unloading, conveyance to the

departmental stores etc. complete (ID Dia).

Pipe Dia. ID 200mm

Providing & Supplying of Class SN8

structured wall Polythelene piping systems

(Pipe with online/offline coupler and

elastomeric sealing ring) with non-smooth

External Annular corrugated and smooth

internal surfaces (Double Wall) for non

142 pressure underground Sewerage & Drainage Rmt 60.00 1004.00

application as per EN:13476-3 incuding all

local and central taxes, transportation,

freight charges, octroi, inspection charges,

loading, unloading, conveyance to the

departmental stores etc. complete (ID Dia).

Pipe Dia. ID 250mm

Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone

aggregate 40mm nominal size) bedding for

143 stoneware pipes of following internal Rmt 100.00 211.59

diameters with necessary formwork and

curing complete.(B) 150mm dia. (166mm

Ave. bed thickness)

TOILET FIXTURES

Providing and fixing wash down water closet

(European type, W.C. Pan) with integral P or S

trap including jointing the trap with soil pipe in

144 Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal Each 10.00 1290.80

and cover to be measured and paid for

separately) (A) vitreous China Pattern :(i) in white

Providing and fixing 12.5 Litres low level

flushing cistern with a pair, of C.I. or Mild

brackets, complete with fittings such as lead

valve less syphon, 15mm nom.nal size brass ball

valve with polythene float, C.P brass handle

unions and couplings for connections, with inlet,

outlet and overflow pipes, 40mm dia. porcelain

enamelled flush bend including cutting holes in

walls and making good the same connecting the

flush bend with cistern and closet (overflow pipe

to be measured and paid for separately)(A)

Vitreous China (I) In white colour

Providing and fixing plastic seat and cover for

wash down water closer with C.P. brass hinges

and rubber buffers. (B) Black plastic seal and

Providing and fixing washbasin with single

hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making

good the same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.

Providing and fixing Kitchen sink with C.I. or

brackets, painted white including cutting

walls and making good the same but Each 12.00 2257.69

fittings. (C) Vitreous China Sink.(i) 600mm x

Providing and fixing C.P. brass waste for

washbasin or sink. (B) 40mm dia.

Providing and fixing M.I. fisher union for

washbasin or sink. (B) 40mm dia.

Providing and fixing 100mm sand cast iron

grating for gully, floor or Nahni trap.

Providing and fixing 600mm x 450mm

bevelled edge mirrror of superior glass

151 mounted on 6mm thick A.C. sheet or plywood Each 15.00 825.48

sheet and fixing to wooden pluge with C.P. brass

screws and washers.

Providing and fixing 600mm x 120mm glass

shelf with C.P. brass bracket and guard rail

complete mixed to wooden plug with C.P. brass

Providing and fixing toilet paper holder.(A)

Providing and fixing screw down bib taps of

154 following size.(B) Brass chromium plated screws Each 15.00 212.68

down Bib Tap. (i) 15mm dia.

Providing and fixing pillar tap, capstan head,

155 screw down high pressure with screws, shanks Each 15.00 305.67

and back nuts. (i) 15mm dia.

Providing and fixing chromium plated brass

half trun flush cock of approved quality

including fixing in pipe line etc. complete.(i)

Providing and fixing chromium plated brass

half trun flush cock of approved quality

including fixing in pipe line etc. complete.(ii)

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe

158 tap etc. complete.(A) White earthenware flat Each 12.00 1026.01

back or corner type size 430mm x 260mm x

Providing and fixing Rubber plug for sink or

Providing and fixing chromium plated, bottle

160 trap with necessary couplings of approved Each 10.00 292.87

quality for wash basin.

Providing and fixing ball cock of approved.

161 quality as directed.(A) Copper Metal (ii) 50mm Each 10.00 187.96

Providing and fixing Angle Cock with screw, back

nuts all necessary fittings etc. Completed

(Cera-CM108/ Parryware-T9939A1 / Hindware-

Providing and fixing water closet squatting

Pan (Indian type W.C. Pan) size 580mm

(Earthwork, bed concrete, foot reste and trap

to be measured and paid for separately) (A)

Vitreous China. (1) Long pattern = White

Providing and fixing 12mm dia. Health

faucet with 8 mm dia of JAQUAR /

HINDWARE/ CERA or approved make

selected by Architect with flexible pipe of

1mt. length and holding stands complete.

Model Equivalant to Jaquar- CAT - ALD-577.

BORE WELL:-Supply installation, testing,

commissioning of Bore well submersible

pump to be installed in the tube well of

required indicated capacity and head as per

relevant IS for Bore water lifting with

suitable submersible vet type, water cooled,

squirrel case motor conforming to IS

working of 3-phase, 50Hz +/- 3% 415 VAT

+/- 10%, AC supply 2900 RPM synchronous

speed with 10mtr. copper conductor flat

cable from pump to starter panel with cables

and termination ( all supports clamps pipe

fittings mechanical seal, bearing, bush,

strainer, etc. comp., Casing C.I., S.S. CF8M

impeller, bronze casing, wearing and bearing

bush, TC mechanical seal, S.S. bearing, S.S.

shaft with sleeve, S.S. strainer, and M.S.

morter along with water guard, single phase

preventor with all cables of appropriate size

control and instrumentations, switches,

testing, and installation along with testing.

The scope shall also include delivery

isolation valve & NRV with PVC piping (400

dia Drill well @ 200mm dia MS. heavy class

pipe : BORE WELL) Assume 250 TO 275mtr

depth) ( 15 TO 20 MTR CU. PER HR. OUT PUT

FLOW RATE with potable water quality ) (15

ERCOLATION WELL:- Drilling of Pilot bore

hole in Alluvial Strata by Direct Rotary Rig of

250 mm. 60 rmtr., Reaming 400 mm.:-

R.mtr,Electrologging charges with carting.:-

1 job.,Providing and installing 200 mm dia

IS:12818 uPVC Casing Pipe "CM" Class Plain

Pipe. :- 30 R.mtr, Providing and installing

200 m1 Job.m dia IS:12818 uPVC End Cap,

with Air Vent Cowl.:- 1 Job.,Supply of Pea

sized Gravel.:- 4 Cu.mtr, Air Vent of 50 mm

bend:- 1 Unt, Lowering and removing of

dropline up to depth 186 Mtr. :- 60 R.mtr., Air

compressor 600 CFM/150 PSI.:- 1 Lot.,

Excavating pit for installing precast filter

system 2.90 x 2.90 x 1.125 Mt. deep. :-

Cu.mtr., Providing PCC of 75 mm thickness of

1:4:8 grade. :1 CMT., Providing & laying

Precast RCC M 25 rainwater filtration

system of Inner dimention 1.00 x 1.00 x

Mt. & Minimum 50 mm wall thickness.

numbers of 50 mm thick closing cover 0.55 x

1.10 Mt. with Hook, 50 mm THk. Perforated

Intermediate Partition Panel to retain Filter

Media. Wall Panel 1250/1000 x 1000 x

mm Thk. with 125 mm Wide Ribbed /

Champhered End connected with Epoxy

coated 12 mm Dia. Pin using Chemical

Grouting of adequate strength and Mortar

Joint Adhesive on Ribbed Edge surface. 8 Set

each of 50 mm dia uPVC bend with 300 mm

uPVC pipe fixed in wall panel at equal

distance.:- 1 Set,Providing & filling Filter

Media mixure of nodular calcium carbonate

and IV800 graphite.:- 1 Lot, Providing and

filling Pre filter a mixture of 20 mm - 40 mm

gravels surrounding the precast filter

systemsystem.:- 4 Cu.ntr.Providing and

Installing Filter System and Bore well with

160 mm dia 6 Kg pressure PVC pipe along

with required accessories.:-

R.mtr,Providing & Installing 0.5 meter height

SS 304 Wedge Wire Screen Screen: 1.00 mm

slotted 150 mm dia , Anchor fastened at

bottom.:- 1 Nos.

INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular

type switch / bell push & accessories and earth

continuity of following type, erected on

Metallic box (The Metallic box should be used of

same company of modular switches to be used

) single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling Pt 210.00 446.00

Point wiring for FAN with 2-1.5 sq.mm & earth

1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum

free EME four or more step type electronic fan

regulator with separately mounted and

168 accessories with earth continuity of following

type erected on Metallic box (The Metallic box

should be used of same company of modular

switches to be used ) , single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling Pt 100.00 633.00

Point wiring for secondary light point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires, in below

type of pipe to be erected complete with

169 earth continuity and necessary connection with

primary light with accessories erected on Metal

/ PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder /

ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess

will be considered as Mains for Secondary

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling Pt 125.00 118.75

Point wiring for Individual Plugwith & earth

1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below

type of pipe erected complete with Modular

type switch & 5 pin Plug erected on Metallic

box (The Metallic box should be used of same

company of modular switches to be used )

covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5

171 sq.mm Cu. Wire from nearby Pt 210.00 521.00

switchboard/mcb db board

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

[II] For 16A Plug and 16 amp switch with 2-

2.5 sq.mm Cu. Wire from mcb db board.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

[III] For 16A Plug and 16 amp switch with 2-

173 4 sq.mm Cu. Wire with 2.5 sq.mm ( green) Pt 1.00 920.00

earthing wire from mcb d b board.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

Point wiring for on board Looped Plug with

6A Modular type switch & 5 pin socket erected on

Metallic box (The Metallic box should be used

of same company of modular switches to be

used ), single mounting base frame covered

with textured / metallic/white front plate

modules erected on / in wall

/ ceiling with following type accessories

Point wiring for Two Way Controlled Light Point

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires erected

in below type of pipe with 6A Modular type

switches and following type of accessories

erected on Metallic box,(The Metallic box

should be used of same company of modular

switches to be used ) single mounting base

frame covered with textured / metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling Pt 6.00 586.00

Providing following type of Modular Type

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured /

metallic/white front plate , modules erected

with necessary connections as per site situation

Engineer In charge.

(1)One No. SP 6 Amp. E.a. 5.00 150.00

(2) One No 5 pin plug E.a. 5.00 150.00

(4) TV Co-axial Socket outlet E.a. 2.00 159.00

(7) Blank Plate Single E.a. 40.00 25.00

(8) Computer RJ-45 socket E.a. 20.00 159.00

(9) 16 Amp. SP one way switch E.a. 2.00 179.00

(10) 6/16Amp. Universal socket E.a. 2.00 198.00

(13) 6A/10A/16A/20A/25A/32A Single

pole Modular MCB Switch

Double Pole Modular MCB Switch

(20) Modular Buzzer E.a. 1.00 148.00

(23) USB Charger with output of 5 V DC,2.1 A with

inbuilt surge protection .cat-III

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

177 necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved

manner as directed

Providing & erecting PVC Corrugated

Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete

of following sizes.

Supplying and laying UPVC cable trunking

system comprising unplasticised polyvinyl,

chloride rigid material with ignition free and

flame proof confirming BS with necessary end

caps Internal and external

bend, flat bends, coupler, tee etc..All

necessary accessories and measuring of following

(2) 100 mm x 50 mm trunking Mtr 10.00 424.00

(4)100 mm x 50 mm trunking with TWIN

compartment With clip in divider

Supplying & erecting 20 Amp 10 KA ‘C

Curve’ single pole MCB with 20 Amp. Plug

180 socket, company fabricated powder

coated sheet steel enclosure erected as

directed with connection.

[A] Metal Clad Socket with metal clad top E.a. 1.00 549.00

Providing & erecting insulated socket

3P+N+E with Plug16A rating which is

comprised of Four pole MCB slot and

insulated socket IP40 cat-III

Providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire

of green colour for earth continuity of

(A) with medium class Rigid PVC pipe

and accessories

(a) 2 wire 1.5 sq. mm Mtr 1750.00 78.00

(b) 2 wire 2.5 sq. mm Mtr 2500.00 103.00

providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

183 to be erected in

/ on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe

and accessories

(a) 2 wire 4 sq. mm Mtr 300.00 139.00

(g) 4 wire 4 sq. mm Mtr 150.00 224.00

(h) 4 wire 6 sq. mm Mtr 150.00 323.00

providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control

wiring) with required size of copper lugs, nuts

and bolts if required.

(e) One wire 6.00 sq. mm Mtr 15.00 70.00

(f) One wire 10.00 sq. mm Mtr 15.00 114.00

(g) One wire 16.00 sq. mm Mtr 75.00 176.00

(h) One wire 25.00 sq. mm Mtr 35.00 293.00

(i) One wire 35.00 sq. mm Mtr 75.00 373.00

Supplying and erecting Flexible PVC insulated

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

e) 1.50 Sq.mm 3 core round PVC sheathed Mtr 350.00 58.00

h) 2.50 Sq.mm 3 core round PVC sheathed Mtr 150.00 97.00

k) 4.00Sq.mm 4 core round PVC sheathed Mtr 35.00 219.00

Providing & Erecting approved make following

size of TV Co-axial flexible cable comprising inner

conductor of solid bare copper insulated with

186 Foam PE & Secondary conductor made of poly

- Aluminium film bonded Al. Braids @ suitable

coverage overall

sheathed with black PVC insulation.

Supplying & erecting approved make LAN

187 cable of following size in existing pipe as per

Supplying & erecting M.S. Box having

Gauge painted with red oxide or Heavy duty

PVC box erected flushed on wall or concealed

in wall with necessary plastering & finishing

following size.

SUB - TOTAL OF INTERNAL WIRING

Switchgears , Panels , MCBDBs & MCBs

Pproviding and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to

189 100A. with Fixed thermal & magnetic release E.a. 1.00 6723.00

suitable to work on A.C. supply 50 c/s. with

all internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing. ( ICS=100% of ICU only )

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having

Normal current rating 200A.with variable

Thermal & magnetic release suitable to work

on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

erected in existing 16 G.M.S.housing

(ICS=100% of ICU only )

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. and

above at 415 V . having normal current

rating 250A. with variable thermal &

magnetic release suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

Providing and erecting busbar chamber

confirming to IS-375 fabricated from

G.M.S. sheet, dust & vermin proof having

hinged door with rubber gasket and

necessary busbar supports with COPPER

busbar having current density not more than

192 1.6 Amp. / sq.mm (Rated current / cross R.O.

section area) duly wrapped with colour

insulation tape for phase sequence, three

phase & neutral each suitable for following

current capacity with necessary painting

mounted on wall or pedestal frame of

required size with necessary connections.

(C) Suitable for 300 Amp. capacity RnMtr 8455.00

Fabricating the box type items made from

M.S. Sheet with A.I. supports, wings,

doors, handles other hardware materials

as per requirement design with finishing

by three tank powder coating processed

inside and outside painted, erected as

directed including minor civil work. to install

providing and erecting Approved make Earth

fault Relay suitable to mount with inter

connection suitable to following size of

194 moulded case circuit breaker having CT ratio &

MCCB rating as following along with shunt trip

220V AC. with all internal connections &

complete erected in existing M.S.housing..

Design, fabrication, assembling, supply,

installation, testing and commissioning of cubicle

type, wall / Floor mounted LT panel suitable for

415 V 3 phase, 4 wire

50 Hz AC supply system fabricated

in compartmentised design from CRCA sheet

steel of 2 mm thick for frame work IP 42 and

covers,3 mm thick for gland plates i/c cleaning

and finishing complete 9 tank process in house

facility for powder coating in approved shade,

extendable type TPN aluminium alloy busbars

of high condectivity, DMC/SMC busbar

supports, entire panel shall have a common

195 copper earthbar of size 25mm X 5 mm at the rear

with 2 Nos. earth studs, solid connection from

main busbar to switchgears with require size

of aluminium busbar & control wiring with

sqmm FRLS insulated copper conductor cable,

cable alleys, cable gland plates i/c accessrories

as per specification and providing

switchgears, metering instruments etc. for

following panel.G.A.Drawing to be approved

by EIC or consultant. ( Outgoing connectors

must be nut-bolt type. Outgoing mains for

63Amp MCBs must be of 4 x 16sqmm cu flexible

wires).Incomers Mains for MCBs shall be always

from the busbars.

( a ) Providing cable clamps / supports

within distribution boards cable alley.

( b ) All hinged door shall be earthed

through 2.5 sq mm tinned b raided copper

( c ) Pad locking of MCCB’s handles in “OFF”

( d ) All the C.T.s should be auto short link

( e ) All the MCCB's should be with rotary

( f ) All incoming and outgoing air circuit

breakers shall be placed on middle portion of

the vertical in single tier formation.

( g ) Any descripancy found in SLD & Boq , it

should be brought in the notice of the client

/ consultant, and the decision will be taken

final by Client / consultant.

Power Distribution Board for Gymnesium (As

196 described above & consisting of following items) No 1.00 138460.00

A. Incoming Feeder:-

(i) 1 Nos. of 160 Amps, 415V,35kA, FP

MCCB with Thermal magnetic Based

releases having O/C, S/C & E/F, extended

Rotory handle for operation along with

(ii)LED type Indicating Lamp with suitable rating

(iii) Digital type 3 phase KWH Meter with

suitable rating of MCB & 3 Nos. of single core

epoxy resin cast type CTs of 100/5 Amps, 10 VA,

CL 1.0 ratings -

160 Amps, 415 V, FP Aluminium Busbars with

shrinkable color code insulation sleeves. 1sqmm

( I ) 80Amp, 25kA FP MCCB with Thermal

magnetic based releses having O/C, S/C &

E/F, extended Rotory handle for operation-

1 No. Incoming supply from incoming of

160A,FPMCCB incomer.

( I ) 100Amp, 25kA FP MCCB with Thermal

magnetic based releses having O/C, S/C &

E/F, extended Rotory handle for operation-

63Amp FP MCB, 10kA - 5 No. ,O/G Terminals

40Amp FP MCB, 10kA - 1 No. ,O/G Terminals

32Amp TP MCB, 10kA - 1 No. ,O/G

Terminals Stud Type

40Amp DPMCB , 10kA "C" Curve - 1 Nos. O/G

Terminals Stud Type

Power Distribution Board for LIBRARY (As

197 described above & consisting of following items) No 1.00 144440.00

A. Incoming Feeder:-

(i) 1 Nos. of 160 Amps, 415V,25kA, FP MCCB

with Thermal magnetic Based releases having

E/F, extended Rotory handle for operation along

(ii)LED type Indicating Lamp with suitable rating

(iii) Digital type 3 phase KWH Meter with

suitable rating of MCB & 3 Nos. of single core

epoxy resin cast type CTs of 80/5 Amps, 10 VA,

CL 1.0 ratings -1 Sets.

160 Amps, 415 V, FP Aluminium Busbars

with Heat shrinkable color code insulation

sleeves. 1sqmm =0.8 Amp

( I ) 80Amp, 25kA FP MCCB with Thermal

magnetic based releses having O/C, S/C &

E/F, extended Rotory handle for operation-

63Amp FP MCB, 10kA - 4 No. ,O/G Terminals

32Amp TP MCB, 10kA - 1 No. ,O/G Terminals

40Amp DPMCB , 10kA "C" Curve - 3 Nos. O/G

Terminals Stud Type

Design, fabrication, assembling, supply,

installation, testing and commissioning of

cubicle type,15KVAR, Voltage Rating 415V

A.C.,3-Phase , APFC Panel having 5-steps

( 2-3-5--5 kvar heavy duty can type

capacitors ) with suitable rating of Incomer

MCB, CT. as per approved by engineer

Supplying & erecting approved make IP

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement

consisting of suitable size of 4 Pole MCB and

pole contactor (cat-III)with analog time switch,

auto manual switch of same make and suitable

input and output Bakelite terminals and with

door earthing approved by Engineer in charge.

MCBDBs and MCBs

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V

200 A.C. system and having breaking capacity 10 KA E.a. 110.00 122.00

to be erected in existing box. confirming to IS

Providing & erecting 240 V MCB double

pole switch for motor & inductive load (C

201 Curve) having 10 KA breaking capacity & confirms

to IS : 8828 in existing box having following

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having

202 10KA breaking capacity & confirms to IS :8828 in

existing box having

following capacity

Sheets steel powder coated enclosure suitable

for incorporating One/Two nos. MCB.

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used)

(A) single phase incoming and horizontal

single phase outgoing

(b) sheet steel double door (IP-43)

(B) three phase incoming and single

205 phase horizontal type outgoing Per phase

isolation type (PPI)

(b) sheet steel double door

providing and erecting Approved make ELCBs

/ RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on

206 single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature

& do not incorporate any electronic

component. for following Max. rating

erected as directed

(iii) 63 Amps. DP E.a. 10.00 2891.00

Providing and erecting Approved make

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral

415V,50Hz. having characteristic of quick

action & tripping with all advance feature &

do not incorporate any electronic

component for following Max. rating

erected as directed.

(ii) 40Amps. FP E.a. 1.00 2872.00

Providing and erecting metallic vitrified

danger notice board as per language suggested

by engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

Providing & erecting Medium Voltage Danger

Notice Board sticker as per language

suggested by engineer incharge of standard size

SUB - TOTAL OF Switchgears , Panel and

Follow IS code :3043 is the guideline for the

Providing and erecting required size HOT

deep Galvanised iron strip for earthing of H.T.

ACB/ Transformer LT panel board, Motors etc.

using proper clamp.

Providing and erecting required size Copper strip

211 for earthing of H.T. OCB / ACB/ Transformer, KG 30.00 787.00

LT panel board, Motors etc. using copper clamp.

Providing and erecting Annealed bare Copper

wire 8 to 16 SWG.

Providing and erecting HOT deep Galvanised

iron strip wire 8 to 16 SWG.

Supplying & erecting earth pit of minimum

bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising,

212 connection terminal dia of 12mm with

constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:-

0.2 W/ meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:-

<2%(C) Back fill Compound :- Earthing

compound should be capable to retain

moisture for long time Necessary test report

must be submitted.

(a) For Electrical Installation up to 440V in

normal soil Length of pipe -

1 Mtr Back filling compound - 1 Nos Bag

(c) For Electrical Installation covering

Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like

Automation, SCADA)

i.e independent Earthing in normal

soil. Length of Pipe :

mtrs Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting in earthpit of minimum

bore dia. 225mm size approved make

Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm

200 Micron galvanising, Inner pipe dia of

mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with

constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy

duty cover.(approved make OEM has to

submit test certificate including value of

earth resistane of

[C] For Electrical Installation covering

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA)i.e.

independent Earthing located in other E.a. 3.00 10489.00

than normal soil i.e. Soft Rock, Marshy Soil

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

SUB - TOTAL OF Earthing

CABLES, Cable Termination and cable

Providing and erecting XLPE (IS:7098)(I)-88

armoured cable multistrand / Solid

216 Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of

following size of cables

(a) 4 core 4 Sq. mm Mtr 25.00 139.00

(b) 4 core 6 Sq. mm Mtr 600.00 150.00

(c) 4 core 10 Sq. mm Mtr 250.00 167.00

Providing and erecting XLPE (IS:7098)(I)-88

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

(d) 4 core 16 Sq. mm Mtr 100.00 183.00

(e) 4 core 25 Sq. mm Mtr 100.00 227.00

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2

Providing and erecting XLPE(IS:7098)(I)-88

armoured cable multistrand / Solid

218 Copper conductor for 1.1 KV.to be laid on

wall with necessary clamps or in existing trench

/ pipe at road crossing or floor of following size

(A) 4 core 2.5 Sq. mm Mtr 50.00 336.00

(A-1) 4 core 4 Sq. mm Mtr 50.00 451.00

(B) 4 core 6 Sq. mm Mtr 50.00 631.00

(A) 4 core 10 Sq. mm Mtr 75.00 838.00

Making trench in soft soil of suitable width of

90 cm deep for laying cable or locating the fault

219 all over the Mtr 750.00 55.00

run and back filling the same and making the

surface as normal ground.

Covering of cable with second class bricks or

cement tiles laid cover the cable crosswise

220 & also on both sides with covering of 7. 5 Mtr 25.00 139.00

Cm. layer of sand above & below cable (16

bricks per meter)

( A )Making trench in Hard Murrum / Tar

221 suitable width of 90 cm or required depth for Mtr 10.00 74.00

laying any size of cable or locating the fault all

over the run and back filling the same and

making the surface as

(B) If additional machinery like hammer driller or

Drilling the road without breaking the road

surface (Asphalt) for laying of cable for feeding

223 power supply by making up to following size

of holes at both ends

(A) Up to 100 mm bore dia Mtr 10.00 488.00

(B) Up to 150 mm bore dia Mtr 10.00 610.00

Supplying following size of Light duty “A” Class

. Pipe & erecting as directed by Engineer-in-

(A) 25 mm dia Mtr 10.00 171.00

Providing & laying. R.C.C. Hume pipe for cable to

be laid 90 cm. below ground across the road

225 crossing or on floor with necessary material

in an approved manner and making the ground

as per original.

Providing & laying approved make Double

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

226 necessary connecting accessories of same

material at required depth in existing trench

for laying of cable. below ground / road

enclosing cable

(A)50 mm outer dia Mtr 650.00 62.00

(C))90 mm outer dia Mtr 75.00 95.00

Providing & laying approved make ISI marked

Rigid PVC pipe having 6Kg / cm2 (Class-3) to be

erected at road crossing on or floor as directed

for laying of cable. The pipes as following size of

dia & weight per

(D) 75 mm inner Dia. (5.5 Kg/6RMT) Mtr 25.00 124.00

(F) 110 mm inner Dia. (11.63 Kg/6 RMT) Mtr 25.00 234.00

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

228 insulated armoured cable complete with

out going tails, insulating tape etc for following

size of cables.

(b) 2 to 4 core 6 Sq. mm E.a. 40.00 38.00

(c) 2 to 4 core 10 Sq. mm E.a. 12.00 38.00

(d) 2 to 4 core 16 Sq. mm E.a. 8.00 47.00

(e) 2 to 4 core 25 Sq. mm E.a. 4.00 51.00

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an

approved manner.

Providing and fixing approved make Perforated

C type cable tray. Made from sheet steel. The

cable tray should be single or double bended as

per required and as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erection with

necessary support( included) as per Specification

and as per instruction of engineer in charge..

SUB - TOTAL OF Cables,Cable

Terminations & Cable Trenches

Light Fixtures & Fans

Supply , Installation, testing and commissioning

of pre-wired, LED fitting/post top luminaries

etc of all types, complete with all accessories

and tube etc. directly on ceiling/ wall, including

connection with 1.5 sq. mm FRLS PVC insulated,

flexible, copper conductor, single core cable

with flexible conduits and coupler and

231 earthing etc. as required. Note:- The LED

Light fixtures should comply all international

standards third party ( LM 79 for complete

fixture, LM 80 for individual LED ). The

Manufacturer / Channel Partner of the

Manufacturer has to submit 4- Years

unconditional free Replacement Guarantee

for complete fixture.

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion

resistance with diffuser housed in

aluminium casted body with company

mark/name 120 to 300 V,Power Factor more

than 0.9, THD < 10 %,CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

110 lumens/watt.

LED driver efficiency > 85 %, CREE / OSRAM

/ PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux

make LED used for luminaire. ( fitting required

LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage capacity

between the ranges shown.)

( A ) Tube Light with integral / non integral

(iii) 18-20 Watts, Surge - 2KV,IP-20,

conventional 4 No 1.00 293.00

(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet

(D) LED Panel Light with provision for Plane

front frame with translucent cover fixed to

housing complete.IP20

(i)up to 8 Watts,4" x 4", Surge-2 KV No 5.00 271.00

(C) Square/ Circular shaped

Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips

(iii) 12-15 watts, 6" x 6", Surge-2 KV No 80.00 462.00

(v) 24 watts, 12" x 12" , Surge-2 KV No 45.00 717.00

( D ) Surface or Recessed LED Panel Light

with Provision for plane front frame with

translucent cover fixed to housing complete.

(vii) from 45 to 48 watts, 24" x 24", Surge-2

(F) Spot Light 425 Lumens, Surge-2KV

(i) 3 to 7 Watts No 5.00 807.00

(ii) 8 to 11 Watts No 5.00 1354.00

(H) Mirror Light 9 Watts, wall mounted minimum

Providing and erecting PVC body surface or

mounting LED Bulk type 9 watt Lighting Fitting

with electronic driver. And lumen output from

luminaire 720lm , input voltage range 90-

300VAC , 50Hz cool white(3000 to 6500k),

inbuilt driver, -20degC to

+60degC working temperature, AL frame with

Providing & erecting Approved make Power

Saving 45 - 50 Watt Ceiling Fan with double

ball bearing ISI mark with Condenser

volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with

, canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by

Engineer in charge))

Supplying & erecting approved make low

noise decorative exhaust fan having size 200mm

RPM with square frame ABS body with inbuilt

lowers & square frame.

Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up

to 50mm length each side and pierced through

M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary

Providing 2.5mm.thick laminated acrylic

sheet to cover the fan hook or Fan box.

Supplying and erecting 19 / 20 mm. nominal

bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with

proper insulation without leakage and earthing.

Supplying and erecting approved make

type bracket fan A.C. 23OV. 50cy/s 400/450

240 mm sweep wall mounted with height adjustment No 1.00 2329.00

and rotary tilting device complete with guard,

flexible Core plug top complete erected with

lead wires as directed.

SUB - TOTAL OF Light Fixtures & Fans

External lighting

Supply , Installation, testing and

commissioning of pre-wired, LED fitting

/post top luminaries etc of all typesof

external lights, complete with all accessories

and tube etc. directly on pole / pole

bracket , including connection with 1.5 /

2.5 sq. mm FRLS PVC insulated,3 core

flexible, copper conductor, with flexible

conduits and coupler and earthing etc. as

Supplying and erecting LED street light / Flood

light fittings with High power White LEDs

wattage of 1Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast

aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or

embossed 120 to 300 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy>120 lumens/watt . LED driver efficiency

%.CREE / OSRAM / PHILIPS Lumileds / NICHIA

/ SEOUL/ BridgeLux (U.S.A.) make LED used

for luminaire. ( fittings required LM-79

& LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select

any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -

4KV integral and 10 kv non integral ,Light

must have 440VAC line supply protection. It

should withstand 48 hours for 440VAC line

(f) Above 60 watts to 90 watts ( Required

(B) Flood Light (IP-65), Surge -4KV,Light

must have 440VAC line supply protection. It

should withstand 48 hours for 440VAC line

(c) Above 60 watts to 90 watts No 4.00 5124.00

(C) Post Top Lantern Decorative LED fitting

comprises of Copper dust finish cast

aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting

driver and accessories wired upto terminal

(b)32-40W ( Required 40w ) No 9.00 4056.00

Supply of approved make FRP Pole having

following specifications: FRP Light Pole made by

CNC filament winding machine or Centrifugal

casting process using thermoset resin

polyester/epoxy resin system) having minimum

45 to 62% glass content. The pole should be in

one piece and tapered round in shape, having

smooth finish and should be totally free from

corrosion as well as non conductive & shock

proof Pole should be provided with FRP

Anchor Base and it should be heavy duty, or

MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS

6746. Resin used shall be UV resistance and

pigmented. A highly weather resistant

polyurethane coating shall be applied to the

pole after applying suitable primer system

that ensures proper adhesion of the paint.

Minimum coating thickness shall be 80 to

100 micron. Deflection of the pole shall not

exceed more than 10% of the length of pole

for the given load“ Pole should be generally

made as per the dimensional data,

performance criteria and some

interchangeability features of poles as

per standard ANSI C 136.20 latest version

or ASTM D 4923/01 including cable

termination box with necessary

accessories . The size of pole and type of

installation with foundation as per

manufacturer details and site requirement

(1) Suitable for base plate mounting single

[D] Overall length of 4 Mtr. Average

Thickness: 7mm.Top/ Bottom OD Dia A/F 76 to

± 2mm approx. Approx. Weight of Pole 16 E.a. 9.00 11150.00

approx. (Without Base)Anchor Base (Size

[J] Overall length of 7 Mtr.Average

7.5mm. Top/ Bottom OD Dia A/F 89/183 mm ±

2mm / 76/193mm ± 2mm approx. approx.

Weight of Pole 40 kg approx. (Without Base)

Anchor Base (Size 300X300 & 18mm th.)

Providing FRP arm bracket of having 2 sets

243 of suitable SS304 hardware for fixing the

spread of 1.2 Mtr(Suitable for 89 to 114 mm pole

(a) Single arm bracket No 17.00 2905.00

(b) Double arm bracket No 1.00 4480.00

Supplying &erecting sintex make SMC press

moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with bakelite

connector strip 4way & hinged doors having

locking arrangements with

mounting clamp with nuts, bolts & washers

suitable for erection on wall ( c)150mm x 125mm

x 100mm [deep].

Providing cement concrete.for foundation or

for concrete filling in 1:2:4 ratio with 20 to

mm stone metal duly plastered with necessary

curing for pole muffing or any other purpose.

B' class galvanised iron pipe 32 mm

outside dia 45 cms long duly welded on

20 cms x 20 cms x 3 mm thick M.S. base

plate, erected on wall or corner for

mounting street light luminaire with

necessary hardware materials duly painted.

SUB - TOTAL OF External Lighting

Supplying & erecting approved make

Automatic liquid level controller 6A. with sensor

testing as per instruction of Engineer in charge on

site complete with wiring connection with

existing wires , with copper conductor from

pump to upper and lower tank.

Supplying and erecting Flexible PVC

insulated multistrand multicore 1.1 kv grade ISI

marked copper wires of following size to be

erected as directed.

e) 1.50 Sq.mm 3 core round PVC sheathed Mtr 100.00 58.00

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

249 necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved

manner as directed .

Providing & erecting water cooler having

storage capacity 150 Ltr.& cooling capacity

Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C

within a hour, The water cooler should be

comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank

surrounded by evaporating, coil, thermostats,

relay etc.complete with necessary inlet & outlet

The body of water cooler will be made from

Stainless Steel.

Supply and erecting of 35 watt Water

Purifier with Intelligent purity sensor

system: it continuously scans the water to

give 100 percent safe water, E-boiling: this

technology purifies water completely and

destroys all known disease-causing bacteria

and virus to make every drop as safe and

pure, High flow rate: the aquaguard hi-flo

delivers a high flow rate of 3 litres per

minute delivering more water in lesser

time, Mineral preserver system: electronic

impulses are produced to prevent scaling of

the quartz tube, thereby ensuring that

precious minerals and nutrients are retained

in the water, Power: 35 watts; operating

voltage: 230 volts,

Providing & erecting open well horizontal

block pump set with cast iron body, complete

for three phase submersible motor having

[B] For 2 HP 3 phase open well horizontal

mono block pump set suitable for 200 LPM @

25 mtr head suitable for 50 mm dia delivery

[C] For 3 HP 3 phase open well horizontal

mono block pump set suitable for 85 LPM to

270 LPM @ 11 mtr to 33 mtr head suitable

for 50/65 mm dia delivery pipe

Supplying & erecting approved make motor

control cubical panel (Direct - on - line) made

from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors

and locking, arrangement consisting of suitable

size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating

lamps for R- Y - B phases, overload relay,

Automatic water level controller, Ammeter,

Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main

contactor & overload relay, start

- stop push buttons, to be erected on angle iron

frame grouted on wall as directed. The

isolator, overload relay & contactors will be of

L & T, Siemens or BCH make only.

(a) DOL up to 5.0 H.P. No 3.00 7179.00

Supplying, Installation, Testing and

commissioning 3HP, 440V, 3Phase, 100-

600LPM, 2900RPM

Sewarage submersible pumping sets of CI casing

254 & impeller, SS shaft, including with inbuilt No 2.00 18220.34

water level sensors for operating the pumps

automatically and all accessories suitable for

operation on 220 V-240 V, single phase, 50 Hz.

AC supply etc. as reqd.

> 35 mm solid handling

capacity,Minimum Capacity - 100-60050

LPM,Minimum Head 3-17

Mtr with 10 Mtr cable

Supplying and erecting approved make online

Un-interruptible Power Supply system with

IGBT Based rectifer and Inverter & sealed

maintenance free batteries. Single phase Input

and Single Phase output with Inbuilt Isolation

transformer with 0.8 load power factor with

battery, over under voltage output with over

255 load & short circuit protection equipment. No 1.00 128815.00

The system housed in CRC sheet duly powder

coated paint with following capacity & with

Following size of batteries for 30 Min Backup

(Minimum 5376 VAh) 5 KVA UPS with 28 AH,

16 Nos. Battery Certification : BIS (Including

Five year free maintenance with

(D) 5 KVA with 1Hr Backup

Charges for doing liasioning work for

obtaining the necessary clearances from

the Electrical inspector / competent

Authorities for the total Electrical

installation, Elevator Inspection,co-

ordinating with various agencies. All

necessary drawings, calculations, test

certificates, etc. as required by these

authorities shall be prepared and furnished

by the EPC Vendor. Any

modification/rectification as required by

these authorities shall be carried out by

theEPC Vendor at free of cost. The fees

required to be paid to these authorities for

inspection shall be borne by Owner on

production of documentary evidences.

Supply, Installation, Testing and Comissioning of

4MP Fixed Lens Dome Type

H.265 4MP IR Vandal Proof Dome N/W

Camera, 2.8mm/3.6mm, 30M IR, Micro SD,

DC12V/PoE, IP67/IK10, Basic IVA, 1 / 2.7"

0.01 Lux, F1.2, AGC ON; Defog, True day/night,

Digital WDR, 3D DNR, HLC & BLC, Triple

streams, Smart codec by ROI, Cyber Security,

Basic intelligent video analytics, NDAA

Compliance, UL, CE, FCC Certified (Including

Five year free maintenance with guarantee)

Supply, Installation, Testing and Comissioning of

4MP Fixed Lens Bullet Type

H.265 4MP IR Bullet N/W Camera, 3.6mm /

6mm, 50M, Micro SD, DC12V/PoE, IP67/IK10,

4MP resolution (2560 × 1440), True day/night,

Digital WDR, 3D DNR, HLC & BLC, Triple

streams, Smart codec by ROI, Cyber Security

Basic intelligent video analytics, NDAA

Compliance, UL, CE, FCC Certified (Including

Five year free maintenance with guarantee)

SITC of 24 x 10/100/1000BASE-T ports,4 x

Gigabit RJ45/SFP Combo ports,Advanced L2

security features

L2+ Static Routing Optional “standard mode”

or “surveillance mode” management user

interface (Including Five year free maintenance

with guarantee)

8 Port Network PoE Switch

Supply, installation, testing and

commissioning of PoE switch specification as No 2.00 8500.00

Supply, Installation, Testing and

Comissioning of 32 Channel Network Video

Recorder (NVR), Dual OS design, HDD Hot

Swap with RAID support, N+1 hot spare

configuration, Support 16CH@2MP,

H.265/H.264 Video Compression, HDMI,

260 VGA output, upto 8 SATA interface each No 1.00 234605.36

with max 10 TB support and 1 eSATA, 16-

ch synchronous playback at up to 1080p

resolution, Gigabit Ethernet network

interfaces, bandwidth 320 mbps, CE FCC, BIS,

Operating Temp - 10 deg to 50 deg C, USB

and serial Interface, RAID supported

(Including Five year free maintenance with

Supply, Installation, Testing &

Commissioning of 43" 4K with BRIGHTNESS -

300 nit,RESOLUTION-(3840*2160)UHD,CPU-

Cortex-A55 x4,1.1GHz,GPU-

Triple core Mali470 600Mhz,OS & VERSION

INFO-Android TV 'P' - 9.0,MEMORY FLASH-

16GB EMMC,RAM-2.0GB , DDR3

2133Mhz,HDR 10 available,AUDIO OUTPUT

POWER (RMS) - 10+10,USB DEVICE

SUPPORT-YES,VIDEO FORMAT-

H.265/H.264/H.263/MPEG1/MPEG2/MPEG4,AS

PECT RATIO-16:9,PIXEL PITCH-

0.2451(H)*0.2451(V) mm,DISPLAY COLOURS-

1.07G,CONTRAST RATIO-1200:1,VIEWING

ANGLE (HORIZONTAL / VERTICAL)-178°

(H/V),OPERATING VOLTAGE-110V-240V~ at

50/60Hz,STD BY POWER CONSUMPTION-

<0.5W,RF IN-1 side, DTV in-1 side,AV1 IN -

1MINI side,USB INPUT (2.0 SUPPORT)-2

side,HDMI INPUT(2.0 SUPPORT)-3

side,HEADPHONE OUT-1

side,SPDIF OUT-yes optical,RJ-45-1 side.

262 Wall Mount Rack

supply installation testing and

commissioning of Rack (Final size is to be

calculated by contractor base on drawings

and actual requirement of site)

Rack are fabricated from good quality of CRCA

bended, welded and powder coated.

Welded frame integrated with side wall and

vented top cover with Fan Mounting

provision, rear side of enclosure having wall

mounting provision, front glass door with lock

and key provides the visibility and

Rack is conforms to DIN 41494 or

equivalent standards. Equipment mounting

are Din standard slots.

Rack is tobe provide with Power distribution

required 5A, 3 pin socket with switch,

Horizontal / Vertical cable manager, Cooling

fan, Hardware, Horizontal / cantilever tray etc.

complete as per site requirement.

Supply,Installation,Testing and

Commissioning of 20 ft HDMI Interface

Cable Should be 20ft Male to Male High-

speed Category 2 HDMI cable; Should be

24k gold-plated 19-pin Type A connector;

Should have High-flex CL3-rated jacket;

Should Support 4K60 4:4:4 video; Should

support 18 Gbps bandwidth; Should be RoHS

compliant (Including Five year free

maintenance with guarantee)

Supply, Testing and Commissioning of

Surveillance Hard Disk

Supplying & erecting approved make LAN

265 cable of following size in existing pipe as per

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

266 necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved

manner as directed

SUB -TOTAL OF CCTV SYSTEM

Provision of Split A/C work

CABLES, Cable Termination and cable

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

267 conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

(A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2

(B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand / Solid

Copper conductor for 1.1 KV.to be laid on

wall with necessary clamps or in existing trench

crossing or floor of following size of cables.

(A-1) 4 core 4 Sq. mm Mtr 550.00 451.00

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

271 insulated armoured cable complete with

out going tails, insulating tape etc for following

size of cables.

Providing and, fixing heavy duty flange type

brass double compression type cable gland

with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating

tape etc for following size of

Solder less crimping type Aluminium

lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure

tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Providing and fixing approved make Perforated

C type cable tray. Made from sheet steel. The

cable tray should be single or double bended as

per required and as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erection with

necessary support( included) as per Specification

and as per instruction of engineer in charge..

Providing and erecting Sheet Steel powder

coated Vertical MCB distribution board

(VTPN) - flush / surface mounted double

door (IP54) fitted with insulated copper

busbar, isolated neutral link, earth bar and DIN

rail, confirming to IS 13032 and BS 5486-

1986,IP-54 suitable for 63/100 AMP TPN

MCCB + RCCB as incomer and three phase

outgoing as per following .(The DBs should be

used of same company of MCB to be used)

(A)4 way outgoing No 2.00 9925.00

(B)6 way outgoing No 1.00 12061.00

Pproviding and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to

276 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with

all internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only No 3.00 6723.00

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

Providing and erecting required size HOT

deep Galvanised iron strip for earthing of H.T.

, OCB/ ACB/ Transformer LT panel board,

Motors etc. using proper clamp.