Interior works for display corridor from AOB entrance (East and South) to Chairperson and Dy Chairperson Corridor at Visakhapatnam Port Authority Visa

S.No SUBHEAD OF WORKS TOTAL AMOUNT

TOTAL AMOUNT (Civil+Electrical) 3,93,28,494.00

Providing and laying in position cement concrete of specified grade

4 4.1 excluding the cost of centering and shuttering - All work up to plinth level

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone Cum 1 3.08 6,812.00 20,980.96

aggregate 40 mm nominal size)

Doors/Windows/Glazing/Panelling

Providing and fixing 12 mm thick frameless toughened glass door Sqm 2 22.5 5,325.90 1,19,832.75

shutter of approved brand and manufacture, including providing and

fixing top & bottom pivot & double acting hydraulic floor spring type fixing

6 21.18 arrangement and making necessary holes etc. for fixing required door

fittings, all complete as per direction of Engineer-in-charge (Door handle,

lock and stopper etc.to be paid separately)

SLIDING GLAZED DOOR: Providing, installation, Testing & Sqm 1 22.30 10,430.24 2,32,594.36

Commissioning of Bi-Parting Automatic Sliding Door Operator complete

7 MR-1 with a pair of bi-parting doors and two fixed side screens. The door is

activated by radar units mounted either side of the threshold

UPVC Window: Providing & Fixing UPVC sliding windows 3-track Sqm 1.00 3.30 10,993.55 36,278.72

Minimum 2.5mm Gauge (Medium)

8 9.147.A4.1 (Fenestech /Torfenster or of Approved Make) with 6mm glass with all

fittings like rollers, locking arrangement, beading, handle etc. & required

hardware of approved quality, etc.

Wall Panelling - Providing & fixing panelling as per drawing made out of Sqm 1.00 624.72 14,155.33 88,43,115.54

frame both ways Horizontally and Vertically with 6mm thk.Marine

Plywood with 1mm thk laminate of aproved shade. The skirting should

be asper approved laminate as per drawing and direction,Therateis

including all necessary fitting and fixtures gluing material and other

hardware incluiding cleaning, etc complete. Note.:as per detailed

drawing given by Architect / instructions given by Architect on site etc.

Brick work with common burnt clay F.P.S. (non modular) bricks of class

10 6.1 designation 7.5 in foundation

6.1.1 Cement mortar 1:4 (1 Cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class

11 6.4. designation 7.5 in superstructure above plinth level up to floor V level in

all shapes and sizes in :

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

MARBLE & GRANITE WORKS

Providing and fixing 18 mm thick gang saw cut, mirror

polished,premoulded and prepolished, machine cut for kitchen

platforms, vanity counters, window sills, facias and similar locations of

12 8.2.2.2 required size,approved shade, colour and texture laid over 20 mm thick

base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement,mixed with matching pigment, epoxy touch ups, including

rubbing, curing,moulding and polishing to edges to give high gloss finish

Providing and fixing stainless steel cramps of required size and shape kg 100 25 714.40 17,860.00

for anchoring stone wall lining to the backing or securing adjacent stones

13 8.15 in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),

including making the necessary chases in stone and

holes in walls wherever required. (250g each cramp wt)

Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing Each 90.00 90.00 43.90 3,951.00

14 8.16 adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2

coarse sand), including making the necessary chases.

9 WOOD & PVC WORK

Providing wood work in frames of doors, windows clerestory windows Cum 11 0.726 1,16,520.30 84,593.74

15 9.1.2 and other frames, wrought framed and fixed in position with hold fast

lugs or with dash fasteners of required dia and length (hold fast lugs or

dash fastener shall be paid for seperately) - Sal wood

Providing and fixing panelling or panelling and glazing in panelled or

panelled and glazed shutters for doors, windows and clerestory windows

16 9.7 (Area of opening for panel inserts excluding portion inside grooves or

rebates to be measured). Panelling for panelled or panelled and glazed

shutters 25mm to 40mm thick

Digitally signed by DEEPAK

Tender for “Interior works for display corridor from AOB entrance (East & South) to Chairperson & Dy. Chairperson Corridor at Visakhapatnam Port

Authority, Visakhapatnam”

S. NO SR-2023 Description of Item Unit Nos Total Qty RATE

DSR-2023 NON DSR

Plywood 5ply, 9mm thick - Decorative plywood both side decorative Sqm 11 27.72 2,724.25 75,516.21

17 9.7.3.1 veneer (Type - 1) conforming to IS 1328 BWR

Providing and fixing aluminium handles, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed

to required colour or shade, with necessary screws etc.

Providing and fixing aluminium hanging floor door stopper, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

20 9.101 transparent or dyed to required colour and shade, with necessary

screws etc. complete.

21.0 9.101.1 Single rubber stopper Nos 15 15 39.60 594.00

Providing and fixing bright finished 100 mm mortice lock with 6 levers Nos 2 2 850.05 1,700.10

22 9.113 without pair of handles of approved quality for aluminium door, with

necessary screws etc complete as per direction of Engineer- in-charge.

Steel work welded in built up sections/ framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

23 10.25 primer

using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, Kg 50.00 50.00 172.60 8,630.00

24.0 10.25.2 brackets, gates and similar works

13 FINISHING WORK

25 13.4 12 mm cement plaster of mix :

13.4.2 1:6 (1 cement: 6 coarse sand)

26 13.16 6 mm cement plaster of mix :

Distempering with oil bound washable distemper of approved brand and

manufacture to give an even shade :

28 13.41.1 New work (two or more coats) over and including Sqm 1 500.000 185.65 92,825.00

water thinnable priming coat with cement primer

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone

additives of required shade:

New work (Two or more coats applied @ 1.43 ltr/10 Sqm 1 500.000 171.10 85,550.00

30 13.47.1 sqm over and including priming coat of exterior primer applied @ 2.20

Providing and applying white cement based putty of average thickness 1 Sqm 1 100.00 156.05 15,605.00

31 13.80 mm, of approved brand and manufacturer, over the plastered wall

Painting with synthetic enamel paint of approved

brand and manufacture to give an even shade :

13.62.1 Two or more coats on new work Sqm 1 500.00 226.25 1,13,125.00

21 ALUMINIUM, GLAZING & ITALIAN MARBLE WORKS

Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone

work by providing weather silicon sealant over backer rod of approved

quality as per architectural drawings and direction of Engineer-in-charge

21.8.1 Upto 5mm depth and 5 mm width Rmtr 4 80 96.75 7,740.00

Providing and fixing 18mm thick Italian marble stone machine cut, Sqm 1 165 10,414.80 17,18,442.00

mirror/ eggshell polished, Marble stone work for wall lining (veneer work)

including dado, skirting, risers of steps etc., in required design and

pattern wherever required, stones of different finished surface texture,

34 8.11.1 on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand)

laid and jointed with the cement slurry @3.3kg/sqm including the point

with white cement slurry admixed with pigment of matching shade,

including rubbing, curing, polishing, etc. all complete as per architectural

drawings and as directed by Engineer-in-charge.

Providing and laying machine cut, mirror polished, Italian Marble stone sqm 1 528.0 6,603.35 34,86,568.80

flooring laid in required pattern in linear portion of the building all

complete as per architectural drawings, with 18 mm thick stone slab laid

over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm

35.0 11.51.1 including pointing with white cement slurry admixed with pigment to

match the marble shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge - 18

mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or

Dark Emperadore etc.

Digitally signed by DEEPAK

Tender for “Interior works for display corridor from AOB entrance (East & South) to Chairperson & Dy. Chairperson Corridor at Visakhapatnam Port

Authority, Visakhapatnam”

S. NO SR-2023 Description of Item Unit Nos Total Qty RATE

DSR-2023 NON DSR

Design supply & installation of suspended Spider Glazing system sqm 1 244 9,502.32 23,18,566.08

designed to withstand the wind pressure as per IS 875 (Part-III). The

Suspended System held with Spider Fittings of SS-316 Grade Steel of

approved manufacturer with glass panel having 12 mm thick clear

toughened glass held together with SS- 316 Grade Stainless steel

Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass

fins and glass panel assembly shall be connected to Slab/beams by

means of SS- 316 Grade stainless steel brackets & Anchor bolts and at

the bottom using SS channel of 50x25x2 mm using fastener & anchor

bolts, non staining weather sealants of approved make, Teflon/ nylon

36.0 25.8 bushes and separators to prevent bi-metallic contacts, all complete to

perform as per specification and approved drawings. The complete

system to be designed to accommodate thermal expansion & seismic

movements etc. The joints between glass panels (6 to 8 mm) and gaps

at the perimeter & in U channel of the assembly to be filled with non

staining weather sealant, so as to make the entire system fully water

proof & dust proof. The rate shall include all design, Engineering and

shop drawing including approval from structural designer, labour, T&P,

scaffolding, other incidental charges including wastage, enabling

temporary services all fitting fixers nut bolts, washer, Buffer plates,

fastener, anchors, SS channel laminated glass etc. all complete. For the

Providingof&payment, actual

fixing false elevation

ceiling 12.5mmarea ofgypboard

thick Glazing including thickness

ceiling surfaces in sqm 1.00 504.00 1,907.35 9,61,304.40

plain including G.I. suspenders forming a grid of intermediate channel at

1220mm centre to centre with ceiling sections fixed at 450mm centre to

centre at right angle to the underside of intermediate channels with

connecting clips complete as per India Gypsum Technical Manual

including finishing with jointing compound and joint paper tapes and

37 26.26.2 priming with two coats of drywall top coat and fixing of perimeter channel

The rate shall also include cutting the Gypboard for light fixtures/A.C.

diffusers etc. and providing necessary and additional frame work for

fixing the same. Whereever perimeter channels are cut in this process,

additional support shall be made for proper stability without any extra

cost. The work shall be carried out as per specifications, drawing and as

Wall painting with premium acrylic emulsion paint of interior grade, sqm 1.00 300.00 142.80 42,840.00

having VOC (Volatile Organic Compound ) content less than 50 grams/

litre of approved brand and manufacture, including applying additional

coats wherever required to achieve even shade and colour - Two coats

Demolition Work

Dismantling wood work in frames, trusses, purlins and rafters up to 10 Cum 2.00 1.68 4,459.10 7,491.29

39 15.14.1 metres span and 5 metres height including stacking the material within

50 metres lead : Of sectional area 40 square centimetres and above

Dismantling stone slab flooring laid in cement mortar including stacking Sqm 1.00 528.00 266.45 1,40,685.60

40 15.25 of serviceable material and disposal of unserviceable material within 50

Dismantling wooden boardings in lining of walls and partitions, excluding Sqm 3.00 24.00 77.75 1,866.00

41 15.39.2 supporting members but including stacking within 50 metres lead :

Thickness above 10 mm up to 25 mm

Demolishing brick work manually/ by mechanical means including Cum 3.00 4.10

stacking of serviceable material and disposal of unserviceable material

within 50 metres lead as per direction of Engineer-in-charge - In cement

Ground floor walls for reception Cum 1.00 27.95

Dismantling doors, windows and clerestory windows (steel or wood) Nos 8 8 367.20 2,937.60

43 15.12.1 shutter including chowkhats, architrave, holdfasts etc. complete and

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing

and false ceiling including disposal of unserviceable material and

44 15.57 stacking of serviceable material with in 50 meters lead as directed by

Engineerin- charge.

Dismantling steel work manually/ by mechanical means in built up

45 15.19 sections without dismembering and stacking within 50 metres lead as

per direction of Engineer-in-charge.

at staircase 15mmx20mm MS rods @ 7 nos per flight density - 7850 112.00 0.067

RECEPTION : 4500X800 ,Providing Reception Table as per design on

site in 19 mm marine plywood frame work with 1 mm thk vineer table

top, including 12 mm thk. GLOSSY ONYX ALABASTER FILM

RECEPTION : 4000X800 ,Providing Reception Table as per design on

48 site in 19 mm marine plywood frame work with 1 mm thk vineer table

top, including 12 mm thk. Satvario Quartz on table top rested

Digitally signed by DEEPAK

Tender for “Interior works for display corridor from AOB entrance (East & South) to Chairperson & Dy. Chairperson Corridor at Visakhapatnam Port

Authority, Visakhapatnam”

S. NO SR-2023 Description of Item Unit Nos Total Qty RATE

DSR-2023 NON DSR

Providing and fixing double scaffolding system (cup lock type) on the sqm 1 244.0 338.25 82,533.00

exterior side, up to seven story height made with 40 mm dia M.S. tube

1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock

system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S.

staircase system in the scaffolding for working platform etc. and

maintaining it in a serviceable condition for the required duration as

approved and removing it there after .The scaffolding system shall be

49 14.72 stiffened with bracings, runners, connection with the building etc

wherever required for inspection of work at required locations with

essential safety features for the workmen etc. complete as per directions

and approval of

Engineer in-charge .The elevational area of the scaffolding shall be

measured for payment purpose.The payment will be made once

irrespective of duration of scaffolding

TOTAL AMOUNT 1,97,66,137.50

TOTAL AMOUNT 1,97,66,137.50

Digitally signed by DEEPAK

Tender for “Interior works for display corridor from AOB entrance (East & South) to Chairperson & Dy. Chairperson Corridor at Visakhapatnam

Port Authority, Visakhapatnam”

ELECTRICAL ESTIMATE

S.No. Description of Items Unit Qty NSR Rate NSR-Amount DSR Rate DSR-Amount

Supply and fixing of Recessed Round BLACK COB DownLight, GLARE

FREE with die cast aluminium housing,Power factor >0.9,THD

<10%,Beam Angle 45°-48 degreed,Lumen Output 1100-1250, lm,CRI

>90,CCT 4000±175K,IP20,SPD 4 KV,Dia. Ø75 mm,Size (Dia X H) Ø84 X

80 mm (Tol.±5 mm) 4000K, Wattage - 15W : Cooridor Lighting etc., as

required by the EIC. All labour and tools.

Supply and fixing of SWIVEL COB-- Tiltable--38 Degre Beam Angle-

CCT-4K, NEUTRAL WHITE--- 1780-- 1820lumens, SPD--4KV, CRI> 80,

Die Cast Alluminium Housing, wattage - 20W : Double Height Area

etc., as required by the EIC. All labour and tools.

Supply and fixing of Designer Multi directional COB Tiltable Rotatable

- 45 degree x 330 degree-- Glare Free Light-- Beam Angle-- 22degree-

3 - Alluminium Die Cast Housing, CRI>90, Surge Protection-- 4KV, Each 22 4367.39 96,083

Wattage-10W Dual Integrated fixture etc., as required by the EIC. All

labour and tools.

LED Display: Supply & fixing of DIGITAL VIDEO WALLS (Display

screens)of various sizes including all the necessary supporting fixtures

and all other necessary accessories etc., as required by the EIC. All

labour and tools.

1) Display Screen Pitch - 1.88mm, Brightness - 600 nits, PKG type- 3 in

1, webOS of size - 17'x5' - 2 nos.

2) 86 inch Display Screen of Brightness - 330 nits, Ultra HD resolution,

webOS of size – 6.5'x1.2' - 1 nos.

3) Display Screen Pitch - 1.88mm, Brightness - 600 nits, PKG type- 3 in

1, webOS of size – 13’x6.5' - 1 nos.

4) 55 inch Display Screen of Brightness - 400 nits, Ultra HD resolution,

webOS of size – 3’x5' - 10 nos.

Translucent Display (Letters on wall): Supply & Fixing special type of

imported solid Acrylic letter (thickness 3mm raised 1.5 inch above

5 ACP)fixed on ACP sheet.All side each letter glows or emits light Sqm 55.74 22350.52 12,45,848

uniformly.Calculation based on all dimensions etc., as required by the

EIC. All labour and tools.

SUPPLY & FIXING of CUSTOMIZED CHANDILIER- Color: Gold With As

Four Almanza. Material: Zinc alloy and glass, No. of heads:

6+15+10+5 Cap type: E14

Wattage: 36 x 4.5 W LED Dimension (mm): Ø 1500 x H 2350 Weight

(Kg): 110, No. of boxes for one product: 6 : CENTER RECEPTION etc.,

as required by the EIC. All labour and tools.

Supply & fixing of DECORATIVE WALL LAMP--BRASS MATERIAL WITH

7 GOLD PLATING WITH ASFOUR CRYSTAL, -L 130 x W 140 x H 500, Each 1 13254.44 13,254

Make:JAQUAR etc., as required by the EIC. All labour and tools.

Supply & fixing of 1 Light aluminium pipe with copper finish

8 Decorative wall lamp with Light Source Provision etc., as required by Each 1 17165.02 17,165

the EIC. All labour and tools. 4 watts

Supply & fixing of Decorative Light flute with chrome finish wall lamp,

9 with Light Source provision etc., as required by the EIC. All labour and Each 1 7129.02 7,129

Supply & fixing of Decorative Wall Light With Base Frame Brass &

Chrome Plating, chrome finish wall lamp with Light Source provision,

With Twisted Glass Tubes etc., as required and as directed by the EIC.

All labour and tools. 9 watts

Supply & fixing of IP20 Indoor Linear Light (24V DC), With Alluminium

Profile Housing SURFACE WHITE/BLACK POWDER COATED FINISH--

11 DOUBLE BRAIDED COPPER- DOT LESS LIGHT COB SOURCE - 25 x M 50 3253.05 1,62,652

25mm--WITH POWER SUPPLY IP20(72W)per 5mtr Lengths--CCT-4K

etc., as required by the EIC. All labour and tools.

Display Box: Made of 19mm commercial laminated plywood with

aluminum frame to hold glass, MR Grade IS 710 from/ Neem Ply with

required hardware fittings etc., as required by the EIC. All labour and

Providing & fixing of Storage cabinet, made of 18mm thick

commercial plywood of approved make on Storage top & made of

12mm thick plywood all outer sides & surfaces (all visible area) shall

be finished with 1mm thick Laminate make & color. All other finishes

shall be done as per detail drawings and as per instructions of

architect/engineer. Sides & bottom shall be made of 18 mm thick

plywood & back side shall be made of 6mm thick plywood,

13 intermediate shelf shall be made of 18mm thick plywood. Self top & Sqm 2.79 14155.33 39,452

bottom surface shall be finished with french polish. The cabinet has

group locks, hinges, stopper, magnate, handles of approved make &

quality and provided S.S. satin finished handle of approved shape &

size Complete. All the inside surfaces shall be finished with enamel

paint of approved make and color. The work shall be measured base

on area of front elevation of each storage unit. The rate to include all

materials, labour, transport, taxes, delivered and placed in position at

site of work etc., as required by the EIC. All labour and tools.

Providing & fixing panelling to the column as per drawing made out

of Marine Plywood with 1mm thk laminate of aproved shade. The

skirting should be as per approved laminate as per drawing and

14 direction,Therateis including all necessary fitting and fixturesgluing Sqm 9.29 14155.33 1,31,506

material and other hardware incluiding cleaning, etc complete.

Note.:as per detailed drawing given by Architect / instructions given

by Architect on site etc. complete.

Digitally signed by DEEPAK

Tender for “Interior works for display corridor from AOB entrance (East & South) to Chairperson & Dy. Chairperson Corridor at Visakhapatnam

Port Authority, Visakhapatnam”

ELECTRICAL ESTIMATE

S.No. Description of Items Unit Qty NSR Rate NSR-Amount DSR Rate DSR-Amount

PROVIDING & FIXING FOR THE LED & TRANSLUCENT BOARD: * The

box frames should be made from MS square pipe as basic structure

acting as runners along the length, height & width of the box. The MS

square hollow pipe has to be 16 gauge thickness for mainframe,

verticals and for cross sections (bracings).

* FRAME WORK SUPPORT: The sign cabinet should be provided with

suitable arrangements for fixing to

existing wall surface or existing supporting structures available with

suitable clamps, brackets, anchor bolts etc.. The arrangements

should be adequate to support the weight of the cabinet and to keep

it firmly in position. Nothing extra will be paid for fixing the cabinet in

* FASTNERS: The fasteners used shall be uniform and at such spacing

that it does not spoil the appearance of the signage looking from the

bottom or the sides. The head of the screw shall have capping. of

stainless steel.as per the guidelines. Top panel of the main frame box

should be covered with ACP sheet in approved shade . The side and

bottom panels of the box should also be of same material and

finished in a similar manner. Side panels should be suitably machine-

pressed/punched to make fins/slits to dissipate the heat generated

when the sign is back lit. The slits should be such that water should

not enter inside. The cutting and bending of sheets shall be done in a

machine to get uniform straight edges etc., as required by the EIC. All

labour and tools.

B INTERNAL WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed steel conduit, with modular switch,

modular plate, suitable GI box and earthing the point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable etc. as

DSR-1.3.3 Group C Point 15 1845 27675

Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed steel conduit as

DSR-1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 120 369 44280

Supplying and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providing and fixing 3 pin

5/6 A modular socket outlet and 5/6 A modular switch, connections

etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providing and fixing 6 pin

DSR-1.32 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, Each 4 586 2344

connections etc. as

Supplying and fixing modular blanking plate on the existing modular

plate & switch box excluding modular plate as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for

DSR-5.16 loop earthing as Meter 50 70 3500

D MAIN DISRIBUTION BOARD

Supplying and fixing of following ways surface/ recess mounting,

vertical type, 415 V, TPN MCB distribution board Of sheet steel, dust

protected, duly powder painted, inclusive Of 200 A tinned copper bus

bar, common neutral link, earth bar, din bar for mounting MCBs (but

without MCBs and incomer ) as required . (Note : Vertical type MCB

TPDB is normally used where 3 phase outlets are required.)

DSR-2.5.3 12 way (4 + 36), Double door Each 1 12833 12833

Supplying and fixing following rating, four pole, 415 V, isolator in the

existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the

existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series,

miniature circuit breaker suitable for inductive load of following poles

in the existing MCB DB complete with connections, testing and

commissioning etc., as required.

DSR-2.10.1 Single pole 10 A Each 5 256 1280

Supplying and fixing single pole blanking plate in the existing MCB DB

complete etc. as required.

Digitally signed by DEEPAK