ADDITION/ ALTERATION AND REFURBISHMENT OF ROOM NO 207 209 211 213 215 216 217 219 220 222 224 226 228 AND 230 OF BUILDING NO P-7 AT TECH AREA B IRDE UNDER GE (I) RND DEHRADUN

Amount

S&F 18 mm thick one side pre-laminated both side cellulka PVC board anti-terminite & moisture proof with life time gurantee for workstations , office tables, computer tables, cubical tables, service tables haivng drawer, office Almirah etc , for outer body of drawer , CPU stand , key board in work-station , back side of cabinet almirah , shelves of almirah with smooth finishes all side PVC beading and necessary finishes etc complete all as specified and directed.

S&F 18 mm thick both side pre-laminated both side cellulka PVC board anti-terminite & moisture proof with life time gurantee for workstations , office tables, computer tables, cubical tables, service tables haivng drawer, office Almirah etc for box of workstation , internal part of the drawer of workstation and sides of the box of cabinet Almirah ,shutter of cabinet Almirah with smooth finishes all side PVC beading and necessary finishes etc complete all as specified and directed.

S&F 24 mm thick one side pre-laminated both side cellulka PVC board anti-terminite & moisture proof with life time gurantee for workstations , office tables, computer tables, cubical tables, service tables haivng drawer, office Almirah etc for table top incl necesssary PVC beading and necessary finishes etc complete all as specified and directed.

S&F stainess steel contains left plus right ball bearing runners , precision full extension runner with pull-out stop and roll-out guard full extension loading capacity 45 kg , Lenght of runner -45 cm complete all as specified and directed. . Make:- Hi-Tech , Godrej, Haffley, Siri

S&F 30 mm (width of flaps when open) continous (Piono) brass Hinges bright finhes fixed to cupboard, shutter of almirah , etc complete all as specified and directed. Make:- Hi-Tech , Godrej, Haffley, Siri

S&F 100 mm Stainess Steel premium quality handles fixed of drawer of workstation complete all as specified and directed. Make:- Hi-Tech , Godrej, Haffley, Siri

S&F 150 mm Stainess Steel premium quality handles fixed of drawer of workstation complete all as specified and directed. Make:- Hi-Tech , Godrej, Haffley, Siri

S&F 50 mm Stainless steel Locks for drawer complete all as specified and directed.Make - Godrej , Link

S&F 75 mm Stainless steel Locks for Almirah. Make - Godrej , Link

S&F 40 mm PVC corner fitted to drawer complete all as specified and directed.

S&F powder coating anodised aluminium framework for workstation cabin etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

M & L for vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

All as per item No. 13 above but on vertical surfaces such as skirting incl incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No. 15 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/slabs/blankets any thickness including grid work/aluminium frame work, cover fillets complete all as specified and directed.

M&L for anodised aluminium snap grid frame work for false ceiling with grid size of 605x605 mm all as specified in clause 10.38 of SSR pt-I (2009) complete all as specified and directed.

M & L for exposed metal frame ceiling with 8 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600 mm grid (Frame work for ceiling shall be measured and paid seperately) complete all as specified and directed.

M&L preparation of complete removal of existing treatment of walls and two coat of distempered oil emulsion incl 3 mm thick wall putty and primer complete all as specified and directed.

M&L preparation of complete removal of existing treatment of ceiling and two coat of distempered oil emulsion incl 3 mm thick wall putty and primer complete all as specified and directed.

M&L Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick wall surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and directed.

M&L preparing surfaces, plastered or unplastered new surfaces on walls , and two coat of distempered oil emulsion incl 3 mm thick wall putty incl primer complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick ceiling surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and directed.

M&L preparing surfaces, plastered or unplastered new surfaces on ceiling , and two coat of distempered oil emulsion incl 3 mm thick wall putty incl primer complete all as specified and directed.

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

S&F powder coating anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F powder coating anodised aluminium frame for doors, windows, ventilators, cabin other frame work etc with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L 12 mm thick pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice laminations complete all as specified and directed. .

M&L for 5.5 mm thick sheet glass ordinary quality in panes exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

S&F in repairs Mortice lock,vertical type of size 100 mm with brass body 2 lever complete all specified and directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated, designation No 3 , universal type, suitable for door shutter up to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L preparation of old painted steel and iron surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted steel and iron surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint on gaurdbars complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

M&L Preparation and applying two coat of synthetic enamel paint over one coat of pink primer on old wooden surfaces, of any description, over 10cm width or girth not other wise described complete all as specified and directed.

M&L two coat of varnishing finishing coat with synthetic varnish including preparation of old treated surfaces of any description , over 10 cm in widht or girth complete all as specified and directed.

M&L for taking out old window blinds and S&F vertical window blinds made up with vertical louvers, manually operated, with dust guard features, operated by wand control system, of shade and design as approved by the Engr-in-Charge incuuding necessary fittings complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed.

M & L for two coat of synthetic enamel paint on surface of any description over 10 cm in width or girth not otherwise described incl preparation of new steel surfaces complete all as specified and directed.

S&F powder coating anodised aluminium window shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each window, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F repair Diamond Aluminium wiremess fixed to aluminium frame of window etc complete all as specified and directed.

Dismantling aluminium framework partition / boarding , any description , fixed in any position with screws etc complete all as specified and directed.

M & L 6 mm thick veneered decorative plywood , grade 1 (with BWR resin) with decorative face veneers on one faces : fixed with nails to timber frame work complete all as specified and directed.

M & L French polishing on surfaces of any description , width or girht including cleaning and preparing the surface including a coat of wood filter on new works with two or more coats complete all as specified and directed.

M&L RCC (nominal mix) Type B-1 1:2:4 (20 mm graded aggregate ) for beams , cantilevers , bressummers , lintels over 1.5 m span complete all as specified and directed.

M&L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) complete all as specified and directed.

All as per Sl item No.50 above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beam , beam haunchings , girders , bressum-mers , lintels , cantilevers , shelves includings supports , overhangs , etc also splays between floors and beams etc complete all as specified and directed.

M&L for cleaning , rubbing completely to the existing steel window shutter and oiling , greasing etc to the hinges , peg stay , etc of steel window complete all as specified and directed.

M&L for 4-6 mm thick white rigid lam signing board with frame for writing fixed with workstation complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, et ccomplete all as specified and directed.

Supply and fixing in replacement of unserviceable suspended architectural LED luminaire 20W complete all as specified and directed. Make Cat Pt No. CONSTA544LP20WLED830SPCWH of Havells or equivalent in C&G or Phillips(continuous mounting end cap). Note: Fixture Size: (LXWXH) in (602x106x57)mm for 20W

S&F and fixing in replacement of unserviceable fluoroscent tubelight fitting batten suitable for single T8 LED tube with all accessories complete all as specified and directed . Make: Crompton Greaves Cat Pt No.DMLN1LT8-16 or equivalent in Havells/Phillips

S&F in replacement of unserviceable fluoroscent tubelight double sided T8 LED tube with in built driver with all accessories complete all as specified. Make: Crompton Greaves Cat Pt No.LGT8-16-865-2 or equivalent in Havells/Phillips

S&F in replacement of unserviceable LED recessed full lit luminaire(2'x2')24 Watt with all accessories complete all as specified and directed of Cat Pt No. LCTLRNE-24-FO-CDL of Crompton Greaves or equivalent in Havells or Phillips

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface in ceiling or roof with GI saddles GI screws, rawal plugs including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for the following :- Note:- (i) Rate for Modular metal flush boxes, blank plates and white cover plate with frames are deemed to be included under above item. No seperate payment shall be made on this account.

(a) One light point controlled by one switch.

(b) One fan point controlled by one switch

(c) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(d) One socket outlet 6 amp controlled by one switch on indepdendent board.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface in ceiling or roof with GI saddles GI screws, rawal plugs including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 2.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one 16 amp socket outlet controlled by one switch on independent board. Note:- (i) Rate for Modular metal flush boxes and white cover plate with frames are deemed to be included under above item. No seperate payment shall be made on this account

As per item No 65 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.50 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4 Sq mm (Nominal area) cable common connected to earth dolly, all as specified for one 2 pin and earth plug and socket complete with one single pole MCB 20 Amp complete, all as speficied and directed by Engr-in-Charge. Make of cable and conduit: Havells/ Plaza/ Kalinga.

S&F Modular switch piano flush button single pole one way 6 amp complete all as specified and directed.

S&F Modular switch piano flush button single pole one way 16 amp complete all as specified and directed.

S&F socket Modular outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed.

S&F Modular socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed. .

S&F ceiling rose 3 plates polycarbonate body complete all as specified and directed.

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specified and directed. Note for Switches, Sockets, Boxes cover plates and frames:- Switches/Sockets, boxes and cover plates shall be of the same make.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-

(a) 2x6 sqmm + 1x2.5 sqmm earth wire in 25 mm dia conduit.

(b) 2x4 sqmm + 1x1.5 sqmm earth wire in 20 mm dia conduit.

S&F MCB distribution board powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:-

(a) SPN, 240 volts, 8 ways.

(b) SPN, 240 volts, 12 ways.

S&F as per load requirement 'C' series MCBs of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

(a) Single pole 6 to 32 amp. Make: IndoAsian Cat Pt No. 8111 22/24/26/27/28/29 or equivalent in Legrand/Schneider

(b) Double pole 10 to 32 amp. Make: IndoAsian Cat Pt No. 811168/70/71/72/73 or equivalent in Legrand/Schneider

Supply and fix single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 32 Amp complete complete all as specified and directed.

S&F in replacement of UNSV rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories in concealed including cutting the wall and making good disturbed surfaces of following sizes:-

25 mm dia

sagar associates

JS CONSTRUCTION COMPANY

Amit Associates

M/S WASEEM KHAN CONTRACTOR