CERTAIN B/R AND E/M REPAIR WKS AT DAD COMPLEX UNDER GE(A) AHMEDABAD

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : MAINT GRANT 2024-2025 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

M&L for preparation of old treated surface of walls (plastered/unplastered ) including cornices, Pilasters etc by brooming down or steel wire brushing, scraping down smoke , soot moulds , moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash, leaving premises clean and tidy complete all as specified and directed

Ditto all as per item No 1.01 above but one coat of white wash on ceilings.

Ditto all as per item No 1.01 above but one coat of oil bound distemper on walls.

Ditto all as per item No 1.01 above but one coat of cement based paint on walls.

Ditto all as per item No 1.01 above but two mm thick of wall care putty on wall.

M&L for preparation of old painted steel surface of any description in any position and location not otherwise described over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engr-in-Charge .

Ditto all as per item No 1.06 above but applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and directed.

M &L Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer to wall surface complete all as specified and directed.

M&L for Complete removal of existing treatment of old plastered surfaces on walls and applying two coats of interior plastic Emulsion and over and incl 1.0 mm average thick coat of wall care putty all as specifed.

Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each.

S&F 2nd hard wood 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Factory made single extruded WPC (Wood Polymer Composite) solid door/ & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F mild steel angle iron work as in doors or gates or grill of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 (Gde-E-165)

S&F Mild steel butt hinges medium weight 100mm long complete all as specified and directed.

S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S&F solid PVC door, cup board frame size 50mmx47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube all as per specification complete all as specified and directed and directed

S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples all as specified and directed by Engineer in Charge

S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a prelaminated PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & b PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing complete all as specified and directed & directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S & F in repairs Sheet glass ordinary quality and glazing with oil putty in square n exe 0.5 sq m in each pane (Thickness in 3.00mm)

S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed.

S & F M&L for Powder coated aluminium ventilator having frame of Section 57x52 ,Series -B 20535 and shutters, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). complete all as specifiedcomplete all as specified and as directed.

S&F Aluminium powder coated door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified

Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified.

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 4.00 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete all as specified and directed.

S & F aluminium anodised partition wall in panels with aluminium frame and partitions of rectangular section of size 100 x 44 x 1.48mm thick fixed in position with 5.50 mm thick plain glass/ 12mm thick prelaminated particle board exterior grade all fixed with 0.70mm thick glazing beading and rubber gaskit including fixing on wall and floor with suitable size of steel chromium plated screw with rowl plug complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed

M & L for non skid ceramic (colored), IS:15622 of approved make & ISI marked 7 to 8 mm thick as in floor area of each tile 0.06 sqm but not exceeding 0.11 sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed. complete all as specified and directed

M&L for Light shade vitrified ceramic tiles 8to 9mm thick, (square or rectangular) polished,area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 all as Specified.

Ditto all as per item No 1.38 above but on vertical surfaces such as skirtings, dados and risers to steps etc incl rendering 10mm thick on of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed

M&L Polished Glazed Vitrified tiles in IS:15622 of approved make& ISI marked vertical surface of size 300x450x 7 to 8 mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match for surface of tiles, over 10 mm thick backing coat with cement mortar 1:4 complete all as specified and as directed.

M&L for Non Skid ceramic coloured jointless tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18Sqm but n. exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete all as specified

Ditto as above item but as in skirting including 10mm thick backing coat of tiles in CM(1:4) complete all as specified.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.

M&L machine cut Kota stone slab 20-25 mm thick as in flooring or trades of step or shelvesetc incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed

M&L machine cut Kota stone slab 20-25 mm thick as in riser to step including 10 mm thick rendring in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing.

M&L Granite slab work 18-20mm thick in floors steps, cooking platforms and like including pointing in white cement with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed by Engineer-in-Charge. (Note : No deduction shall be made for opening of sink portion, shall deemed to be included in the quoted rate)

M&L Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types -Green Marble

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed

Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on any faces of brick work in CM1:6, finished even and fair complete all specified and directed.

M & L for 5mm thick rendering on cement concrete as in ceiling with cement mortaar 1:3 complete all specified and directed.

Supply only Integral waterproofing compound.

M&L for preparation of new surfaces of ceiling plastered/AC sheet and applying three coat of white wash complete all as specified

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper and a coat of primer all as specifed.

M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat of primer on walls all as specified and directed by the Engr-in-Charge

M & L for treating Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified.

Providing and injecting chemical emulsion for Post structional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed

M&L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in, levelling coarse complete all as speificed and directed

M&L in repair for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Part I incl 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and directed by Engineer in Charge

S&F in repair Rotational moulded polyethylene Water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Part I incl 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and directed by Engineer in Charge

S&F for 25 mm SS curtain rod with fixing bracket and knobs fixed in repairs.

S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete all as specified and as directed.

S&F in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe complete all as specified and directed

S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. .

S & F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and directed

S& F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.

S&F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F in repairs stop valves/angle valve fancy type cast copper alloy, chromium plated with long shank and cup for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. .

S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

S & F in repair vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated fancy type pillar tap 15mm bore, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding.

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device.

S&F 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairs complete all as specified and directed.

S & F in repairs chromium plated soap dish complete all as specified.

S&F in repair CP brass Tubular towel rail, 20mm dia, D type, 60cm long between flanges

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed

Supplying and laying 20 mm outer dia Unplasticised PVC SDR 13.5 and plain CPVC SDR 11 fittings pipes fixed complete to walls, ceilings or in floors etc., any type of pipe etc in required length complete all as specified and directed

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed

Supplying and laying 25 mm outer dia Unplasticised PVC SDR 13.5 and plain CPVC SDR 11 fittings pipes fixed complete to walls, ceilings or in floors etc., any type of pipe etc in required length complete all as specified and directed

Demolition and breaking up drain pipes (salt glazed ware, PVC (SWR), AC or Reinforced concrete) internal dia of pipe in 75mm set in cement mortar complete all as specified and directed

Demolition and breaking up drain pipes (salt glazed ware, PVC (SWR),AC or Reinforced concrete) internal dia of pipe in 110mm set in cement mortar and taking out of trenches, if required complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes Type B ISI marked single socketed in any length with rubber ring joints laid on wall fixed complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes Type B ISI marked single socketed in any length with rubber ring joints laid on wall fixed complete all as specified and directed

S&F 75mm dia PVC (SWR) branch piece single (single 'Y') equal or unequal with acess door.

S&F 75mm dia PVC (SWR) branch piece Double (single 'Y') equal or unequal with acess door.

S&F 110mm dia PVC (SWR) branch piece Tee (Single 'T') equal or unequal with acess door.

S&F 75mm dia PVC (SWR) bends any radius with access door.

S&F 110mm dia PVC (SWR) bends any radius with access door.

S&F for PVC (SWR) reducers 110mm bore complete all as specified and directed

S&F for PVC (SWR) floor trap long body type, plain with grating including jointing with solvent cement complete all as specified and directed

S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

S&F for PVC (SWR) vent cowl 110 mm bore complete all as specified and directed

S&F 32mm dia PVC waste pipe fixed in repairs. Including Cup bracket complete all as specified and directed.

S&F in repairs, wash down water colset (wall hung type ) with seat cover of jaquar florentine or equivalent , jaquar catalog no. ONS-WHT-10953BIUFSM (inlusive of brackets), to pedestal pan including all joints, trapete.

S&F Door closer hydraulically regulated, designation No 3, universal type and of weight between 61 to 80kg and fixed, Aluminium (die cast) body fixed in repairs complete all as specified and directed

Providing and fixing in repair factory made 18 mm thick solid PVC sheet single side wood grain printed PVC sheet, for cabinet/cupboard shutter 18 mm thick sheet shutter incl frame work of denisity 600 kg/m3 bent at 90 degree and finished all edges at all level for making edges at all level for making edges, lipping/bending or 0.5 mm thick PVC sheet lipping at all four edges using bonding tape, incl hinges, hasp and staple, magnetic lock, SS handle etc complete all as specified and directed.

S&F in repair 15 mm bore 2-in-1 bib cock with flange complete all as specified and direcrted.

S&F CP Wall mixer with regular spout W/M 15mm dia fixed in repair complete all as specified and directed.

M&L for two coat of sun reflection heat resistance paint acrylic base on RCC roof surface including preparation of surface complete all as specified and directed.

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for modular point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting of same make of switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following Make : Havells / Polycab / Finolex / Plaza - Note : Including Cutting chases,pinning in ,making good for facings where required and pointing the cement mortar 1:3 to ends or edges of landings,steps,cills,sun shades,shelves,lintels etc and cutting chases for concealed conduit wiring etc and making good ,cutting not exceeding 10cm grith all as specified and directed.

One light point controlled by one switch.

One fan point /Exhaust fan point controlled by one switch.

One light point controlled by two, two way switches.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M&L for Modular point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 4 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover complete for one 16 amp socket outlet controlled by one switch on independent board including making good the wall surfaces with matching colour on wall complete all as specified and directed by Engineer-in-Charge.

S&F modular switch one way 6 amp 1 module complete all as required at site or directed by Engr -In- Charge

S&F modular switch one way 16 amp 1 module complete all as required at site or directed by Engr -In- Charge.

S& FModular switch 2 way 6A, 1 module complete all as specified and directed

S&F modular bell push, 6 amp, 1 module complete all as required at site or directed by Engr -In- Charge.

S&F door bell, Multi Music type AC, 240 volts, single pole complete all as required at site or directed by Engr -In- Charge.

S&F modular socket 6/16 - 3 pin 2 module complete all as required at site or directed by Engr -In- Charge.

S&F modular socket 6 amp 3 pin 2 module complete all as required at site or directed by Engr -In- Charge.

S&F modular hum free electronic step fan regulator, 120 watt 2 module complete all as required at site or directed by Engr -In- Charge.

S&F Modular Switch socket outlet multipurpose 3 pin, 15 amp and two pin, 5 amp controlled by one switch complete all as required at site or directed by Engr -In- Charge. Make -

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-LSH multistranded copper conductor cable (Phase - R,Y,B, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes

2x4 sqmm + 1x4 sqmm earth wire in 20 mm dia conduit.

2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit.

Supply and Fix LED Batten 20 watt tube light fiiting complete with decorative type fitting 4 feet long with Light Linear with its bright light output at 120 lumen/watt give batten type complete including all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core 6500K ( fittings shall be fitted on two plastic square/round block. Note power factor should not be less than 0.90.CRI>85, Built in surge protection 4KV, operating voltage 140 to 300 V AC, IP 20 ingress protection. PF>0.9 all as required at site or directed.

Supply and Fix in replacement existing unsv sleek LED mirror light fitting 2 feet long 1x10 W i.e 120 lumen/watt including LED tube 2 feet long of same make having inbuilt drivers, bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core,6500K , PF>0.9. CRI>85, Built in surge protection 4KV, operating voltage 140 to 300 V AC, IP 20 ingress protection. all as required at site or directed.

S&F LED Lamp 9 watt, 230 volts, 180 lumen/watt complete all as specififed and directed.

S&F Power unit for AC or geyser 3.5 KW 4 module including sunken modular GI metal boxes not less than 1.2 mm thick and white modular mounting plates with frame complete all as specified and directed.

Supply & Fixing for sheet metal enclosure MCB distribution board, double door with IP43 -IK09 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required

Supply & Fixing for sheet metal enclosure MCB distribution board, double door with IP43 -IK09protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification

S&F in Wall LED light fitting including fixing arrangement on wall with suitable size of GI pipe bend into shape, clamps and nut & bolts for fitting capacity of LED 20 watt, with pressure diecast aluminum housing & polycarbonate having top opening seperate driver compartment with IP66 protection and impact resistance IK07 duly prewired connection complete all as directed.

S&F MCCB 125A 4 Pole suitable for MCB DB complete all as specified and directed

S&F LED Ceiling Light rounded corners in rectangle or circular shape and white colour of light in both the up and down directions IP 44 ratings for uses in interiors as well as exteriors complete with 7 Watt LED

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp.

Double pole 10 to 32 amp.

Double pole, 40 to 63 amp. Note for MCBs & MCB DBs:- MCBs & MCB DBs shall be of the same make.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and directed

Taking down carefully aluminium or copper submain wiring with PVC casing caping / PVC surface conduit and making good disturbed surfaces complete all as specified and directed

Taking out old hermetically sealed compressor unit (uncut) from water cooler storage type, 40 ltr/hr cooling capacity and replacing the sealed unit with factory reconditioned sealed unit of same brand as per existing (Existing make - Tecumesh, LG, Samsung, Hitachi, Kirloskar 4440/436/443) including the following:- Connection to suction/discharge pipe with necessary repairs and brazing. Replacing capillary tube of existing size and copper liquid filters. Flushing of entire system before gas charging. Gas charging and testing after repairs including installing the machine at site and testing on full load for its smooth functioning complete.

M&L for gas charging to compressors of undermentioned installed machine/equipment to its full capacity with specified grade of refrigerant including other connected process required for gas charging and testing complete for the following :-

Refrigerator 286/300/310 ltr capacity.

Water coolers 40 to 60 ltr/hrs cooling capacity.

Air conditioner window type 1.5 Ton capacity.

Air conditioner split type AC of 1.5/ 2.0 Ton capacity.

S&F in repairs condensor (heat exchanger) coil for any make water cooler of 40 ltr capacity with necessary cutting / welding and brazing work to match with existing condensor complete all as specified and directed

S&F in repairs condensor (heat exchanger) coil for any make window type AC 1.5 Ton capacity with necessary cutting / welding and brazing work to match with existing condensor complete all as specified and directed

S&F in repairs condensor (heat exchanger) coil for any make split type AC 1.5 Ton capacity with necessary cutting / welding and brazing work to match with existing condensor complete all as specified and directed

S&F in repairs condensor (heat exchanger) coil for any make split type AC 2.0 Ton capacity with necessary cutting / welding and brazing work to match with existing condensor complete all as specified and directed

Renewal of relay package assembly with over load protector of water cooler 40 litre/hour cooling capacity for any make including necessary electrical connection, lugs, insulation tape etc all complete all as specified and directed

Renewal of relay package assembly with over load protector of water cooler 60 litre/hour cooling capacity for any make including necessary electrical connection, lugs, insulation tape etc all complete all as specified and directed

M&L for rewinding of fan motor of water cooler of any make with super enameled copper wire of existing size and weight as required including replacement of bushing and capacitor of 2.5 mfd complete all as specified and directed

M&L for rewinding for fan motor of air conditioner of any make and model with super enameled copper wire of existing size and weight including replacement of bushing as required.

Renewal of water circulating submersible pump with motor 1/20 HP, 230 volts AC, ISI marked for any make desert cooler including electric connection complete all as specified and directed

Renewal of cooling pads for desert cooler complete all as specified and directed

Renewal of fan blade of water cooler of 40 to 60 litres per hour cooling capacity suitable for any make and model as required.

Renewal of 15 mm dia concussive push taps of cast copper alloy, screwed for iron pipe for water cooler complete all as specified and directed

Taking out hermetically sealed compressor unit (uncut) from the window type air conditioner of any make, 1.5 Ton capacity and replacing the sealed unit with reconditioned sealed unit complete. Make of compressor :- Tecumesh -1500 / Kirloskar-5522/CR-22 including the following:- Connection to suction/discharge pipe with necessary repair and brazing.Replacing the capillary tubes of existing size and copper liquid filter Flushing of entire system before gas charging.Gas charging and testing after complete repairs including installation of the machine at site and testing on full load for its smooth functioning complete all as specified and directed

Renewal of relay with overload protector for AC split type 1.5 Ton capacity including necessary electric connections, lugs, insulation tape etc complete all as specified and directed

Renewal of relay with overload protector for AC split type 2.0 Ton capacity including necessary electric connections, lugs, insulation tape etc complete all as specified and directed

Renewal of PVC connection pipe 45 cm long both end brass joint with rubber washer complete all as specified and directed

Renewal of air filter suitable for window type AC of any type complete all as specified and directed

S&F in repair door gasket superior quality for refrigerator of any capacity complete all as specified and directed

Renewal of box type relay with over load protector for refrigerator of capacity 286/300/310 litres capacity of any make including necessary connections, lugs, insulation tape etc complete all as specified and directed

Renewal of cooling coil for refrigerator capacity 286 / 300 / 310 ltrs complete all as specified and directed

Renewal of air filter suitable for split type AC of 1.5 / 2.0 Ton capacity complete all as specified and directed

Renewal of 3 speed regulator switch for desert cooler complete all as specified and directed

Renewal of PVC insulated sheathed flexible round, 3 core cable with copper conductor of size 24 / 0.20 for refrigerator, desert cooler & water cooler of different make and size complete all as specified and directed

Renewal of PVC insulated sheathed flexible round, 3 core cable with copper conductor of size 80 / 0.20 for AC complete all as specified and directed

Renewal of sheet metal enclosure, single pole & neutral with two pin & earth plug and socket with one MCB single pole 20 amp, 240 volts complete all as specified and directed

Renewal of (45+4) multyfunctional mfd run capacitor for AC 1.5 Ton capacity including necessary electrical connections, lugs, insulation tape etc complete all as specified and directed

Renewal of (50+6) multyfunctional mfd run capacitor for AC 2.0 Ton capacity including necessary electrical connections, lugs, insulation tape etc complete all as specified and directed

Renewal of 10 mfd run capacitor for water cooler including necessary electrical connections, lugs, insulation tape etc complete all as specified and directed

Renewal of 6.3 mfd capacitor for window AC & split AC including necessary electrical connections, lugs, insulation tape etc complete all as specified and directed

Renewal of 4.0 mfd capacitor for desert cooler including necessary electrical connections, lugs, insulation tape etc complete all as specified and directed

Servicing of split AC or window AC by cleaning the whole equipment, washing of filters, minor adjustments/repair, washing condenser unit any make and capacity complete all as specified and directed

Renewal of plug top 16 amps 3 pin for complete all as specified and directed

Renewal of plug top 6 amps, 3 pin complete all as specified and directed

S&F in repairs remote circuit panel suitable for split type AC of 1.5/2.0 Ton capacity including necessary electrical connections, lugs, insulation tape etc complete all as specified and directed

M&L for recharging of F22/R-32 gas in split type air conditioner 1.5 Ton capacity with specified process complete all as specified and directed

Renewal of swing motor for split type AC of any type and make as per existing.

Renewal of contactor relay for split type AC as per existing.

Renewal of fan blade for desert cooler complete all as specified and directed

Renewal of fan motor for any make desert cooler complete all as specified and directed

Renewal of 3 pin metal socket & plug top for AC point single phase 240 volts, AC ISI marked.

Renewal of MCB single pole 240 volts, 10 to 32 amps, 10 kA, 'C' series, ISI marked complete all as specified and directed

M&L for cutting of window grill for fixing of AC 1.5 / 2.0 Ton window type including making good the disturbed surface complete all as specified and directed

Renewal of copper tubing including brazing, flaring & testing of size 1/ 2" and 5/8" in required length including PVC insulation complete all as specified and directed

Renewal of PVC flexible pipe (½”) 15 mm dia for desert cooler.

Taking down defective ceiling fan, exhaust fan and wall mounting fan and air circulator fan of any make type & sweep including checking the serviceabilty of fan in the presence of MES representative and transporting the same to work shop for repairs and rehanging in position complete all as specified and directed

Taking down and Opening of ceiling fan, exhaust fan and wall mounting fans and air circulator fans (any type, make & sweep) at location of installtion for servicing work such as cleaning of fan blade and greasing of bearing with approved quality of grease, cleaning of bushes and oiling etc wherever required including checking of serviceablity of condenser ball bearing and bushes etc including refitting/assambling, testing and rechanging in same position complete all as specified and directed

M&L for opening of ceiling fan, exhaust fan and wall mounting fans and air circulator fans (any type, make & sweep) at workshop including refitting / assambling, testing after repairs/replacement of following unserviceable parts :

Supply only 3 core PVC insulated overall PVC sheathed standed copper conductor cable 0.5sq mm sizes complete all as specified and directed

Supply only Ball bearing No 6201 suitable for fan of existing make, type & sweep complete all as specified and directed

All as per item No : 3.03 above but Ball bearing No 6202 complete.

All as per item No : 3.03 above but Ball bearing No 6203 complete.

All as per item No : 3.03 above but Ball bearing No 6204 complete.

Supply only 4 MFD suitable for existing complete.

Supply only 2.5 MFD suitable for existing complete.

Rewinding of electric fan motor (Any make, type) with existing size of super enameled copper wire of good quality including treating with insulation varnish & heating including providing insulating material such as cotten tapes, insulating paper etc. for Ceiling fan of 1200 mm sweep complete all as specified and directed

All as per item No : 3.09 above but Exhaust fan of 450 mm sweep

All as per item No : 3.09 above but Exhaust fan of 300/350 mm sweep

All as per item No : 3.09 above but Exhaust fan up to 250 mm sweep

All as per item No : 3.09 above but Wall mounted Cabin fan up to 400 mm sweep

All as per item No : 3.09 above but Air Circulating Fan of size 600 mm sweep

S&F MS clamps (Standard size) with rubber reel with MS nut, bolts, check nut & split pin suitable for ceiling fan 1200 mm sweep complete all as specified and directed

Taking down and refixing storage type water heater (geyser) of 25/35/50 Litres capacity (any type & Make ) from wall by disconnecting the electric connection and water inlet/outlet connection from supply end, checking the serviceability of all parts such as inner vessel, rubber gasket, non return valve, heating element, thermostat etc. and refixing the same after replacing unserviceable parts and reassembling complete:-. Note : Spare parts required to be replaced against unserviceable parts shall be measured & paid separately.

Heating elements, 2 KW of existing type (Round / triangular) complete all as specified and directed

Thermostat of existing type & make 15 Amps, 230/250 volts AC ISI marked complete all as specified and directed .

Safety valve as per existing make and type, ISI marked complete all as specified and directed

PVC flexible conneciton pipe with two brass check nuts & two plastic washers complete all as specified and directed

GIRNAR CONSTRUCTION (BID ID -3153590)

SNEH TRADERS (BID ID -3144238)