PERIODICAL SERVICES AND REPAIRS TO CERTAIN BUILDINGS IN ZONE C AREA UNDER AGE B R (N) NO.I OF GE (N) SECUNDERABAD.

Amount

M & L Preparing the old plastered or unplastered decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.

M & L Preparing the old plastered or unplastered decorated surfaces of ceilings and applying one coat of white wash complete all as specified and directed.

M & L for preparing the plastered or un plastered old decorated surfaces of walls and applying one coat of colour wash complete all as specified and directed.

M&L Preparation of old painted surfaces of walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss: efforescent salts and trading oil, greasy spots and applying one coat of oil bound distemper and including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish of any height etc., complete all as specified and directed.

M&L Preparing old painted surfaces of walls and applying two coats of weather proof paint on external surfaces of walls and celing, including necessary scaffolding and saftey precations to the work complete all as specified and directed.

M & L Preparation of old painted wooden surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L Preparation of old painted steel and iron surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Complete removal of existing treatment of old painted wall surfaces and applying two coats of oil bound distemper (oil emulsion) over and including a coat of alkali resistant primer ove and including 3.00 mm thick white cement based wall care putty to smooth finish.etc of approved make & shade on walls and other places of up to any height complete all as specified and as directed.

Taking down cement plaster on brick or stone walls/ceilings, etc including racking out joints, hacking for key, scrubbing down with water etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M & L Rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement in patches n exc 3 sqm each patch complete all as specified and as directed.

M & L Rendering 5 mm thick in CM (1:3) on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 sqm each patch complete all as specified and as directed.

M & L Rendering 15 mm thick in two coats, 10 mm thick in CM (1:6) and 5 mm thick in CM (1:4) mixed with integral water proofing compound as per manufacturers instructions, on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound.

M & L Preparing newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M & L Preparing newly plasterd wall surfaces of walls and applying two coats of distemper (oil emulsion) over and including a coat of primer using chalk whiting over 3 mm thick wall care putty etc complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of weather proof paint (exterior emulsion) over a coat of exterior primer as per manu facturers instructions complete all as specified and directed.

M&L Cutting down plants/trees of girth n exc 15 cm from roof tops/sides of external walls of buildings, chajja, wall junctions, junctions of rain water/soil/waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including reparing the CI/GI/PVC joints of affected locations by applying TUFALO (Herbal medicine) and making good to suit the adjointing surfaces using PCC type 1:2:4, type B-0 or cement mortar 1:2 with necessary scaffolding/staging etc upto any height complete all as per manufacturer instructions complete all as specified and directed. Note: Any CI/GI/PVC pipes and fittings damaged during work shall be replaced by new one to ensure leakage/seepage free joint without any extra cost to the department.

M&L Obilatering old writing of any description, n exc 0.1 sq m, with paint to match existing work complete all as specified and as directed. . Note for Sl item No 1 to 18 :- (i) Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works. (ii) Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out painting shall be made by the contractor. (iii) Unit rate quoted shall be deemed to include for necessary shifting of tables, movable cupboards and other articles required for execution and placing in same position after completion of the work. (iv) Unit rate quoted shall also include for removing of nails, making good holes, cracks etc to match with the existing surfaces. (v) Contractor have to deposite materials of all periodical Items at AGE Office and will be issue from AGE Office. (vi) The user unit will be handed over the qty of material contracted by the MES and same will be issued to the contractor for External periodical services by the user unit.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level) including removing debris beyond the premises including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L 40mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor finishes and finished even and smooth using extra cement complete all as specified and as directed.

M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as complete all as specified and as directed.

M&L 100 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in flooring/sub base complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern ISI marked body, ISI marked syphon with inlet, ball valve, float and handle and PVC bend including connecting to IWC/ EWC and fixing on wall bracket complete complete all as specified and as directed

S&F in repairs 125mm dia chromium plated grating for nahani traps with or without hole for waste pipe complete all as specified and as directed.

S&F in repairs 125mm dia PVC grating for nahani traps with or without hole for waste pipe complete all as specified and as directed.

S&F in repairs stainless steel sink overall size 915mmx460mm with bowl size 410mmx330mmx160mm with draining board made out of stainless steel 1 mm thick for kitchen with plugs, washers and waste pipe including cast iron cantilever brackets and connecting to union / pipe complete all as specified and as directed

S&F in repairs stainless steel kitchen plate rack of size 90cm x120cm x 1mm thick (18 gauge) conforming to the sample kept in the office of the AGE B/R I, complete all as specified and as directed.

M&L Repairs to leaking bib taps, pillar taps, stop cock, angle valve, PVC connection, waste pipes, float valves, concealed stop cock, GI pipe joints, botttle traps etc of any description by changing the washers or any other minor accesssories required to make the system functional complete all as specified and as directed.

M&L Repairs to high or low level flushing cistern by adjusting the float valve, leakages through or PVC connection / GI bend by replacing of rubber washer, cheek nuts, plunges etc to any type of flushing cistern and to make the cistern functional complete all as specified and as directed.

S&F in repairs 15 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair of 15mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe (minimum weight 142 grams) complete all as specified and as directed

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and as directed

S&F in repairs 25mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe (minimum weight 455 grams) complete all as specified and as directed

S&F in repairs 15 mm bore swivel shower of PTMT any colour (minimum weight 40 grams) complete all as specified and as directed.

S&F in repairs 32 /40mm dia waste fittings, brass chromium plated for wash basins with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs plastic water closet seat, black or white closed pattern, solid type with flat bottom, cover and mild steel chromium plated hinging device complete all as specified and as directed

S&F in repairs brass chromium plated 100mm Stainless steel sink coupling complete all as specified and as directed.

S&F in repairs vitreous china urinal of size 465X 355 x 265 mm, bowl type flat back or corner wall type including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement with grating and union for discharge pipe complete all as specified and as directed

S&F in repairs PVC flexible waste pipes 32/38 mm bore 80 centimetre long complete all as specified and as directed

S&F in repairs of fittings such as socket, elbow, nipple, tee, union and reducer etc to galvanised iron medium grade 15mm bore pipe complete all as specified and as directed.

S&F in repairs of fittings such as socket, elbow, nipple, tee, union and reducer etc to galvanised iron medium grade 20mm bore pipe complete all as specified and as directed.

Taking up or down steel tubing/CPVC bore of pipe 15mm including connection, removing clear off site after credit for the same is recovered by the dept., complete all as specified and directed.

Taking up or down steel tubing/CPVC bore of pipe 20 mm including connection, removing clear off site after credit for the same is recovered by the dept., complete all as specified and directed.

Taking up or down steel tubing/CPVC bore of pipe 25 mm including connection, removing clear off site after credit for the same is recovered by the dept., complete all as specified and directed.

Taking up or down steel tubing/CPVC bore of pipe 40 mm including connection, removing clear off site after credit for the same is recovered by the dept., complete all as specified and directed.

M&L Cutting and grooving of wall for fixing of CPVC pipe lines and after fixing of CPVC pipe line and making good of all cutting surfaces etc complete all as specified and directed.

S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets ,Threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets ,Threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

S&F 15 mm dia GI Tubes (medium grade) galvanised, with all fittings and fixed to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 20 mm dia GI Tubes (medium grade) galvanised, with all fittings and fixed to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 25 mm dia GI Tubes (‘medium grade) galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 40 mm dia GI tube (medium grade) with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends etc complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches, wall or in floors complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches, wall or in floors complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends with oval access door of any radius complete all as specified and as directed

S&F 75 mm dia PVC (SWR) bends with oval access door of any radius complete all as specified and as directed

S&F 75 mm bore PVC (SWR), junction single (single T) equal or unequal complete all as specified and as directed

S&F 110 mm bore PVC (SWR), junction single ( double T) equal or unequal complete all as specified and as directed

S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed.

S&F in repairs Towel Rail, 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats . (Minimum weight 190gms) complete all as specified and as directed.

S&F in repairs 15 mm dia bib tap of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed.

S&F in repairs 15 mm dia Stop valve/Aangle cock of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed.

S&F in repairs 15 mm dia Pillar tap fancy type of standard PTMT of any colour screwed for iron pipe minimum weight 120 grams complete all as specified and as directed.

S&F in repairs 15mm size PVC connection with PTMT nuts 450mm length.complete all as specified and directed.

S&F in repairs of stop valves cast copper alloy, fancy type chromium plated screwed down with long shank and cup (concealed) type, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed to 15 mm bore pipe complete all as specified and as directed

S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed. Make: CAT No F160038 of HINDWARE or equivalent model in PARRY WARE/CERA as approved

S&F in repairs brass chromium plated two way Bib tap screwed for 15mm dia bore iron pipe complete all as specified and as directed MAKE: CAT No F200004FT of HINDWARE or equivalent model in PARRY WARE/CERA as approved

S&F in repairs Pillar taps, fancy type, chromium plated, screwed down, high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and as directed.

S&F in repairs chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed.

S&F in repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per required colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed.

S&F in repairs vitreous china water closet 'Orissa' pattern of size 580mm X 440mm, white with integral foot rest including P or S trap (excluding flushing cistern), but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed.

Dismantling of stone slabs or tiles of any description or thickness laid dry and pointed in any mortar, in floors, aprons etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L 25 mm thick granite tiles (of any size) machine cut, jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone duly grinding and polishing laid over and including 15mm thick screed bed CM (1:4) as in steps, jambs, pillars, window cills, cooking platforms and like complete all as specified and as directed

M&L Rounding and grinding of edges of granite platform both side rounded and grinding the stone complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Non skid coloured ceramic tiles of size exceeding 0.06 sqm but not exceeding 0.11 sqm of 7 to 8mm thick as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including cement screed bed of 15 mm thick CM (1:6) complete all as specified and as directed.

M&L Non-skid ceramic coloured tiles of size exceeding 0.11 sqm but not exceeding 0.18 sqm of 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match laid over and including cement screed bed of 15 mm thick CM (1:6) complete all as specified and as directed.

M&L Glazed coloured ceramic tiles of approved colour of size 300x200x7 mm thick on vertical surfaces as in skirting/dado, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.

M&L Glazed ceramic highlighter wall tiles of approved colour of size 450x300x7 mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.

M&L Welding in repairs not exceeding 2.5 centimetre in length and thickness of metal to be welded not exceeding 6 mm thick complete all as specified and as directed.

M&L Welding in repairs exceeding 2.5 centimetre but not exceeding 5 centimetre in length and thickness of metal to be welded not exceeding 6 mm thick complete all as specified and as directed

Cleaning of PVC water tank capacity n exc 500 litres at any height ( on accessible/inaccessible roofs) by removing all scale, dirt, mud ,any foreign material and removing accumulated silt, other dirty substance, algae, fungus and other bacterial material from sides/bottom of tank by draining / pumping out water/sludge from bottom and other growth from wall/ floor by high pressure cleaning method with jet set, vaccum machine and again cleaning the tank with fresh water and disinfecting the tank Disinfecting by using UV radiator and approved chemical (chloriten). for following capacities of tanks complete all as specified and as directed. Note:- (i) Unit rate quoted shall include for necessary ladder and machinery for pressure cleaning and safety apparatus required for execution of work. (ii) Unit rate quoted shall include for writing the date of actual cleaning with white paint on black background to match with the existing.

All as per item No. 85 above, but of capacity exc 501 ltrs but n exc 1000 litres.

S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in ground shape etc complete all as specified and as directed.

S&F in repairs brass mortice lock 100mm long vertical type 7 levers with handle & 2 duplicate keys fixed to shutter with handles complete all as directed. Make: Godrej/Harrison

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removing debris beyond the premises including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Rendering 15mm thick in CM (1:3) on fair faces of brick/concrete sunken floors, including mixing of wpc finished even and smooth without using extra cement complete, all as directed and specified NOTE: WPC shall be measured and paid seperately including taking down of old plaster.

M&L Application of one coat of water based bitumen emulsion primer at the rate of 0.3litre per sqm after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with polymeric membrane of weight 3 Kg per sqm of standard type consisting of 90 micron HMHDPE torch on membrane over that a coat of blown bitumen 85/25 at the rate of 1.2 Kg per sqm over that providing a sand layer of 25mm thick in sunken floors complete all as specified and as directed.

M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.

M&L Precast PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in chullah hoods,chajjas,water troughs, mangers, shelves and similar articles with plain faces including demolition complete all as directed.

M&L TMT bars 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed.

S&F 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed to wall ceiling or in floors etc. complete all as specified and as directed

Resecuring or easing and adjusting door shutter for proper opening/ closing, tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and as directed.

Resecuring or easing and adjusting window shutter, kitchen cupboard shutters, show case shutter, drawers including fixing of screws adjucting handles, knobs tightening piano hinges with small adjustments for proper opening and closing complete all as specified and as directed.

Fixing only the existing butt hinges of any size & material at any location duly tightening the screws or changing the location of butt hinge or changing the screws with new screws and making hinge functional complete all as specified and as directed.

S&F in repairs 200 mm long mild steel helical door ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair mild steel butt hinges of 100 mm size, medium weight, cold rolled, mild steel complete all as specified and as directed.

S&F in repairs mild steel butt hinges of 75 mm long, medium weight, cold rolled complete all as specified and as directed.

S&F in repairs 300 mm long, mild steel sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed

Fixing only the old door bolt of any size in other location including removing from the existing position with all necessary fixing materials complete all as specified and as directed

S&F in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

All as per Sl item No 106 above but fixing only in repairs to the existing wire cloth such as tightening, nailing etc complete all as specified and as directed

S&F in repairs 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed

S&F in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed

S&F in repairs 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed

S&F in repairs 200 mm long mild steel barrel tower bolt of extruded section stove enamelled black with bright bolt complete all as specified and as directed

S&F in repairs 150 mm long mild steel barrel tower bolt of extruded section stove enamelled black with bright bolt complete all as specified and as directed

Fixing only the existing barrel tower bolt of any size & material in other location including removing from the existing position with all necessary fixing materials complete all as specified and as directed

S&F in repairs 150 mm long extruded aluminium alloy handle, fabricated type complete all as specified and as directed

S&F in repairs 100 mm long extruded aluminium alloy handle, fabricated type complete all as specified and as directed

S&F in repairs 125 mm size mild steel pressed handle oval type stove enamelled black complete all as specified and as directed

S&F in repairs 100 mm size mild steel pressed handle oval type stove enamelled black complete all as specified and as directed

S&F in repairs 0.56 mm thick plain anodised Aluminium sheeting alloy 31000 H4 in covering to door shutters etc fixed with aluminium alloy screws complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed.

S&F Solid PVC door frame of size 50 x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, all as specified and shown in Section 8 of MES Schedule Part-II 2010 complete all as specified and as directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2010 as applicable complete all as specified and as directed.

S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed.

S & F Pressed steel frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and directed.

S&F Bands, straps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts wall ties, hooks for hanging james and similar small articles Fe-410-0 or Fe-310-0 complete all as specifed and directed.

M&L Preparation of wood surface, treating the back of chowkhat, end of post etc area tarred exceeding 0.1 Sqm but not exc 0.5 sqm each complete all as specifed and directed.

M&L Treating small articles such as hold fasts, ends of posts, backs of chowkats etc area n.exc .10Sqm each complete all as specifed and directed.

M&L Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 depth of embeded portion exc half brick & N.exc one brick complete all as specifed and directed.

S & F 30mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides etc complete all as specified and directed.

S & F 35 mm thick factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces complete all as directed and specified.

S & F 2nd class hard wood 30 mm thick factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc., completed all as specified and directed.

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed.

S & F 100 mm size MS Butt hinges(medium weight) cold rolled complete all as specified and as directed

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and as directed

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

S & F Mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed.

M & L Preparation of newly wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of prink primer etc completed all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed with beads complete all as specifed and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames of any size complete all as specified and as directed.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames not exceeding 0.5 sqm in each pane complete all as specified and as directed.

S & F 4 mm thick figured glass pin head type ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.

S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples

M&L 2 nd class hard wood plain fillets of sectional area exc 6& not exc 13 sqcm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed,chamfered or rounded on one edge or face

M&L 2nd class hard wood plain fillets of sectional area exc13 & not exc 25 sq.cm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed,chamfered or rounded on one edge or face

M&L in repairs 18mm thick Plywood grade BWR type BB , fixed with screws to frame work , fixed with svrews to timber frame work all as specified and directed as in repairs.

M&L in repairs 12 mm thick Plywood grade BWR type BB , fixed with screws to frame work , fixed with svrews to timber frame work all as specified and directed as in repairs.

M&L in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.

M&L in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.

S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws as in repairs

S&F 50 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type E-22 complete all as specified and as directed

S&F Steel window with side hung double shutters of gauzed shutter openable inside and glazed shutter openable outside with projecting type hinges , steel handles and steel peg stay with glazing bars dovetailed or welded and ventilator fixed type complete all as specified and as directed

M&L Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 ,complete all as directed

S & F in repairs anodized aluminium alloy powder coated curtain rod 20 mm dia of standard thickness with fixing including necessary brackets, stops, rollers etc complete all as directed.

M&L Mild steel framed work as in doors and chowkats or gates, ladder etc of angle or other section with gusset plates, rails, braces, MS sheet etc, complete, drilled for fixing of steel sheeting are other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings and conforming to Fe 410-W (Gde E-250) quality ‘A’ complete all as specified and as directed

S&F Mild steel sheeting of 1.25 mm thick plain, black sheet as in wall cladding, covering to door shutter and similar works cut to size, holes punched, including round headed screws fixed to steel framing with plan 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and as directed

M&L Welding in repairs not exceeding 2.5 centimetre in length and thickness of metal to be welded not exceeding 6 mm thick complete all as specified and as directed

Dismantling of wrought iron or MS works of any description such as ,chajja etc, including necessary straightening of bends complete all as specified and directed.

Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter etc complete all as specified and as directed.

Demolition of RCC water tank ,chajja of any description and in any position not otherwise specifically provided rainforced (rainforcement of cut as required to facilasite demolition etc) complete all as specifed and directed.

S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde- E-250) Quality “A” complete all as specified and as directed.

S&F Wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed

S&F Pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed

M & L Preparation of new or previously untreted steel or iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling asbestos cement (corrugated micorrugatedetc.) sheet in roof covering/ fibre sheets etc complete all as specified and directed.

M&L 6mm thick asbestos cement corrugated or semi-corrugated sheet fixed with L-type or J-type or cranked hook bolts in roof,walls etc complete all as specified and directed.

M&L 6mm thick asbestos cement two peace adjustable plain wing ridge fixed with L type or J type or cranked hook bolts etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in CM (1:6) complete all as specified and as directed

S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for RCC Jallies and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Providing precast cement concrete louvers and jallies of 25 mm thick (measured solid) of size 60 x 60 cm or 90 x 60 cm with using (1:2:4) type B0 (using 12.5 mm graded stone aggregate) including all mouldings set in CM (1:4) complete all as specified and as directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided including roof padding concrete and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.

M&L 60 mm thick M-35 grade,Machine pressed precast concrete interlocking paver blocks with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 etc complete all as specified and as directed.

M&L Sand filling 50 mm thick under floor/ below interlocking paver blocks or in foundations including well ramming complete all as specified and directed.

M&L Designer rubber moulded chequerred cement concrete tiles with mixture of grey and white cemetn in equal porportions with pigments of size 300 x 300 x 22mm or 250 x 250 x 22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layier in CM 1:6, 15mm thick for laying floor finishes etc complete all as specified and as directed.

M&L Pre cast Machine pressed cement concrete (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc size shall be decided and directed by Eng-in-charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

S&F E grid suspended false ceiling grid system of size 600x600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm. Ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed with purlin/truss etc complete (Main runner, cross tee, wall angle of ms galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primered self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and as directed

S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS squre tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc all as per manufacturers instructions,complete all as specified and as directed. Make: Sintex/Rajshri/Nandi as approved by GE.

S&F Steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters all as per manufacturers instructions, complete all as specified and as directed.

S&F Wash down water closet (pedestal pattern) white and including S and P Trap plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed.

KIRAN CONSTRUCTIONS (BID ID -3365976)

M/s GM Constructions (BID ID -3361279)

G RANGA RAO (BID ID -3367662)

M/s G SATISH REDDY AND CO (BID ID -3361096)

Vara Enterprises (BID ID -3361101)

Squad 7 Projects and Services Pvt Ltd (BID ID -3356374)

abhilasha constructions (BID ID -3360749)