Mehsana - Visnagar - Vadnagar - kheralu - Ambaghanta Road km 14/700 to 17/400 km. Ta, Visnagar, Dist, Mehsana (Resurfacing and Road Furnishing work)

Name of Work : - Mehsana - Visnagar - Vadnagar - kheralu - Ambaghanta Road km 14/700 to 17/400 km.

Ta, Visnagar, Dist, Mehsana (Resurfacing and Road Furnishing work)

It. No. Description of item Quantity Unit Total Amount

It. No. Description of item Quantity Unit Total Amount

In Figures In words

1 Clearing & Grubbing road land including uprooting rank vegation grass Rupees Twenty

bushes shrabs saplings and trees girth up to 300 mm removal of stumps Eight Thousand

of trees cut earlier and disposal of unserviceable materials.( C ) By 1.62 Hect. 28455.09 Four Hundred Fifty

Mechanical Means Light Jungle ( SOR I No :26117C, Pg No: 96) Five and Paise Nine

2 Providing and compacted Quarry spall for hard side shoulder on road Rupees Eight

site including collection of material spreading, rolling of watering etc. Hundred Nine and

complete as directed. Paise Ninety Two

3 Flexible Median Marker : Providing and Fixing of Flexible Median

Marker that are made of tough, high impact resistant, injection-molded,

thermoplastic body with property of flexibility to provide high

durability. The dimension of Flexible Median Marker should not exceed

18.4 cm in height(including shank height),12.5 Cm in width. ,0.65 cm in

thickness and shank depth shall be 3.4 cm The body structure shall be

rounded at all its corners and edges. The plastic used for molding the

Flexible Median Marker should survive impact load of 5kg continuously

for 750 times at room temperature. The logo of the manufacturer shall

be embossed on either side of the body in the injection molding process. Rupees Two

The Median Marker shall have flame like shaped body with, fluorescent Hundred Seventy

yellow color retro-reflective sheeting of size not less than 90 Cm One and Paise Sixty

square, with fully reflective micro prismatic cube corners as its retro- Nine Only

reflective elements as per IRC 67 2012 and ASTM D4956-09 type XI

specifications reflectivity values. The retro-reflective sheeting shall be

one or both sides of the Flexible Median Marker and shall be edge

protected with no exposed edges which will prevent edge lifting,

vandalism, sheeting damage, etc. The Flexible Median Marker shall be

fixed by a combination of epoxy adhesive and grouting as recommended

by manufacturer and Engineer in charge. (S.O.R 26164)

4 Providing and fixing Pre Cast indicator stone of approved stone as per

I.R.C. type design in C.C. 1:4:8 including white washing etc. Hundred Forty Three

complete.(ii) Fixing in C.C. 1:5:10. As Per S.O.R I.no 26053 B - 1 Sr 135.00 No. 343.27

and Paise Twenty

No. 97 Seven Only

5 Providing and fixing ordinary Kilometer stone of precast C.C. 1:2:4 Rupees One

including necessary reinforcement as per I.R.C. type design in C.C. Thousand Two

1:4:8 including letter and paints etc. complete (For N.H., S.H. and 6.00 No. 1293.39 Hundred Ninety

M.D.R.) (26048). Three and Paise

Thirty Nine Only

6 Providing and fixing Pre Cast Hectometer as per I.R.C. type design

including painting, lettering etc. complete.(ii) Fixing in C.C. 1:5:10 As 21.00 No. 356.50 Hundred Fifty Six

Per S.O.R. I.Code. 26044 B Sr No. : 83 and Paise Fifty Only

7 Road marking with hot applied thermoplastic paints with reflectorising

glass beads on bitumin surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including reflectorising glass

beads @ 250gms per sqm area, thickness of 2.5mm is excluding of

surface applied glass beds as per IRC:35-2015. The finished surface to

be level, uniform and free from streaks and holes. zebra patta /bump

patta lane/center line/ edge line/cut patta. The white color marking

should provide liminance coefficinet on cemend road shalll be min 130 3902.92 SMT. 367.72

Seven and Paise

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the Seventy Two Only

service life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-2015. Warranty for

the Retro reflectivity should be two years. (S.O.R. 26161)

8 Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks Raised

Pavement Markers made of polycarbonate and ABS moulded body and

reflective panels with micro prismatic lens capable of providing total

internal reflection of the light entering the lens face and shall support a

load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and

complying to Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and

length shall not exceed 20 mm, 130 mm and 130 mm and with minimum Rupees Three

reflective area of 13 Sqcm on each side and the slope to the base shall Hundred Twenty Six

be 35 +/- 5 degree. The strength of detachment of the integrated and Paise Twenty

cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not Three Only

less than 30+/- 2 mm) from the body is to be a minimum value of

Kgf. Fixing will be by drilling holes on the road for the shanks to go

inside, without nails and using epoxy resin based adhesive as per

manufacturers recommendation and The color of the marker should be

as per the IRC 35-2015 and as directed by Engineer-in-charge.(26162)

9 Tree Guard sign :-Providing & fixing sign board made out of 2mm

aluminium sheet / 3mm ACP (Aluminum composite Panel) ,size 30cms

diameter circle, pretreated with phospheting process and acid etching,

painted with one coat of epoxy primer and two coats of best quality 10.00 No. 429.94

epoxy paint reflectorised with retro reflective sheeting as per latest Ninety Four Only

M.O.S.T. specifications (A) Engineer Grade (VR)... (26107A)

10 Chevron sign :-Providing and fixing sign boards made out of 1.5mm

aluminium sheet / 3mm ACP (Aluminum composite Panel); size

60x50cm rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per

ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle of35x35x3mm;

11.00 No. 3711.75 Hundred Eleven and

painted with bestquality epoxy coatings in black and white bends. the Paise Seventy Five

details of symbol or inscription / numerals for each board shall be as Only

per the instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered shall be

submitted by contractor. (A) Class-B Type-4 Retro Reflective sheeting

11 Cautionary Warning Sign :-Providing and fixing sign boards made out

of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel);

size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-2012.

Pre treated with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro refiectivesheeting of

Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications;

3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in black and white bends. Rupees Five

The details of symbol foreach board shall be as per theinstruction of Thousand Seventy

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size Seven and Paise

Twenty Seven Only

45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for

10 years for the Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting 26092c

12 Regulatory / Mandatory Sign :-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel);

size 60 cms Dia Circle as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM

D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality

epoxy coatings in black and white bends. The details of symbol foreach

16.00 No. 4618.73 Hundred Eighteen

board shall be as per theinstruction of engineer in charge. The fixing at and Paise Seventy

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each Three Only

leg.including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting (26094c)

13 Direction (Junction) Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size

244x122 cms. rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM

D-4956 and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand

Rupees Twenty Six

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 50 x 50 x 5mm; painted with

4.00 No. 26572.09 Hundred Seventy

bestquality epoxy coatings in black and white bends. The details of Two and Paise Nine

symbol foreach board shall be as per theinstruction of engineer in Only

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting. (26098c)

14 STOP Sign :-Providing and fixing sign boards made out of 2mm

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 90 cms

Octagone as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm

/ 65NB Circular MS Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy Rupees Seven

coatings in black and white bends. The details of symbol foreach board Thousand Two

shall be as per theinstruction of engineer in charge. The fixing at site 2.00 No. 7213.42 Hundred Thirteen

and Paise Forty Two

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting. (26095c).

15 Give Way Sign :-Providing and fixing sign boards made out of 2mm

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 90 x

x 90 cms. equilateral triangle as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per

ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required Rupees Five

Thousand Seventy

and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; 2.00 No. 5077.27

Seven and Paise

painted with bestquality epoxy coatings in black and white bends. The

Twenty Seven Only

details of symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size

45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. (A)

Engineering Grade.(26097A)

16 Distance Informatory / Destination Sign :-Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 180x120 cms. rectangular as per design of IRC-

67-2012. Pre treated with phospheting process & acid etching; coated

with one coat of epoxy primer and two coats of best quality epoxy paint

; reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest Rupees Twenty

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post of Iron Angle Thousand Nine

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame 2.00 No. 20918.11 Hundred Eighteen

fabricated from suitable size iron angle of 50 x 50 x 5mm; painted with and Paise Eleven

bestquality epoxy coatings in black and white bends. The details of Only

symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the

17 Place Identification Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size

150x90 cms. rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per

ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr (2 Nos.) long

stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron angle of 35 x 35 x Rupees Fourteen

3mm; painted with bestquality epoxy coatings in black and white bends. Thousand Eighty

The details of symbol for each board shall be as per the instruction of 2.00 No. 14085.46

Five and Paise Forty

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size Six Only

45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for

10 years for the Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (c)

Class-c Type-11 Retro Reflective sheeting (26100C)

18 Route Marker sign :-Providing and fixing sign boards made out of

mm aluminium sheet / 4 mm ACP (Aluminum composite Panel); size

60x45cm rectangular plus 30x25cm additional plate as per design of

IRC-67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6 mtr long stand post of Iron Angle 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated from Rupees Five

suitable size iron angle of 35x35x3mm; painted with bestquality epoxy Thousand One

coatings in black and white bends. the details of symbol or inscription / 2.00 No. 5108.58 Hundred Eight and

numerals for each board shall be as per the instruction of engineer in Paise Fifty Eight

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Only

Cms. for each leg including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (C) Class-C Type-11

Retro Reflective sheeting (26108C)

19 Hazard Marker Sign :-Providing and fixing sign boards made out of

mm aluminium sheet / 4 mm ACP (Aluminum composite Panel); size

90x30 cms. rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM

D-4956 and latest M.O.S.T.Specifications; 1.8mtr long stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality

4.00 No. 3666.30 Hundred Sixty Six

epoxy coatings in black and white bends. The details of symbol foreach and Paise Thirty

board shall be as per theinstruction of engineer in charge. The fixing at Only

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting.(26102c).

20 Kerb guard sign board (small) :-Providing & Fixing sign boards made

out of 2mm aluminium sheet, size 240 x 30 cms in U spape; as per the

attached drawing pre treatedwith phospheting process & acid etching.

coated withone coat of epoxy priemr and two coats of best quality epoxy

paint reflectorised with Micro Prismatic grade retro refiectivesheeting of

Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; stand

post and frame fabricated from iron angle of 50x50x5mm, 10mm sq. bar Rupees Seven

as required, painted with best quality epoxy coating the fixing at site Thousand Four

shall be in 1:2:4 CC block of size 45 x 45x 60cms for each leg, Hundred Eighty and

including excavation curing etc. complete under the supervision of Paise Six Only

engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting. (26113C).

21 Solar Stud: Supplying of Solar Raised Pavement Markers made of

polycarbonate molded body with circular shape, solar powered, LED

self illumination in active mode, 360 degree illumination and reflective

panels with micro prismatic lens capable of providing total internal

reflection of the light entering the lens face in passive mode. The marker

shall support a load of 20000 kg tested in accordance to ASTM D

The marker should be resistant to dust and water ingress according to IP

65 standards and should withstand temperatures in the range of 0 C to

70 C. Color of lighting could be provided in red or yellow (amber) as

per requirement and typical frequency of blinking is 1 Hz. There should Rupees Two

be current losses of less than 20 micro-amperes at 2.4 V in sleep- Thousand Eighty

Eight and Paise

charging mode to enhance the life of the marker and a full charge should

Sixty Eight Only

provide for a minimum autonomy of 50 hours. The height, width and

length of the marker shall not be less than 10 mm x 100 mm x 100 mm.

Also, the surface diameter of the marker shall not be less than 100 mm

respectively. The weight of the marker shall not exceed 0.5 Kilograms.

Fixing will be by drilling holes on the road for the shanks to go inside,

without nails and using epoxy resin based adhesive as per manufacturers

recommendation and complete as directed by the engineer.(26167)

22 Providing and laying of Plastirib - T or equivalent raised profile edge

line marking ( audible warning ) with hot applied thermoplastic road

marking compound according to IRC 35 - 2015, Clause 7.7, with 2mm

thick base coat layer above that ribs profile size of lenght 40mm X

width 140mm X Height 6 mm thick ( Total 8 m

thick ) at the distance of 250 mm between two ribs including

reflectorizing glass beads @ 250 gm/ sq.mt area. The maximum width 200.00 No. 827.19

Seven and Paise

of raised profile should be 150 mm. The thickness of 8 mm profile Nineteen Only

should be exclusive of surface applied glass beads. The finished surface

to be levelled, uniform and free from streaks and holes, to be applied on

edge lines. The profile marking should be mark basic line and raise line

at a time simultaneously. (26169).

23 Providing Yellow and Black Patta ( three coat) including distempeing

(Three coats) with oil bound distemper of approved brand and

manufacture and of required shade on wall surfaces to give an even

shade, over and including a priming coat with distemper primer of Rupees Ninety One

approved brand and manufacture after thoroughly brushing the surface 1485.00 SMT. 91.42 and Paise Forty Two

free from mortar dropping and other foreign matter and also including Only

preparing the surface even and sand papered smooth as per instruction

of Engineer Incharge.(18017+18021).

24 Type - B, "THRIE" : Metal Beam Crash Barrier (Providing and erecting

a "Thrie" metal beam crash barrier comprising of 3 mm thick corrugated

sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC

series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to

Thousand Seventy

centre, 2 m high with 1.15 m below round level, all steel parts and 725.00 Rmt. 4071.31

fitments to be galvanised by hot dip process, all fittings to conform to Thirty One Only

IS:1367 and S:1364, metal beam rail to be fixed on the vertical post with

a space of channel section 150 x 75 x 5 mm, 546 mm long complete as

per clause 811) (8.23B)

25 Anti-Glare screen: Providing and erecting Safety Light Barrier Anti-

Glare screen of dimension 1335 mm x 600 mm x 80 mm leaf shape of

High durable virgin premium grade Polyethylene material ( L.L.D.P.E.)

resistant to wind load 6m/s, and good aging resistance including Radium

srtrip of 225 mm x 215 mm size on both side and olive green colored

leaf. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

1350.00 No. 1901.29 Hundred One and

Cms by making 45 cm x 45 cm x 30 cm size pit in existing median. the Paise Twenty Nine

minimum overall height of top of leaf should be 1500mm from road Only

surface. the work including transporation of materials, fixing, curing of

concrete block, painting of block etc complete as per instruction and

approval of engineer incharge at site.

Total Bid Price (in Figure)

Rupees One Crore One Lakh Fifty Five Thousand Eight Hundred Twenty and Paise

Seventy Two Only

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

C)Net Tendered Amount (A-B) (in figure) ………………………………

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

4 Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Deduct Credit Of Dismantled Crash Barrier Rs. -202000

Dy. Executive Engineer Executive Engineer

R&B Sub Division R & B Division

Signature of contractor Visnagar Mehsana