CONSTRUCTION OF SUB CENTER AT TANKI FALIYU KATHOR, KATHOR VILLAGE IN NEW EAST (SARTHANA) ZONE, SURAT.

DESCRIPTION QUANTITY UNIT AMOUNT

WORK UP TO PLINTH LEVEL

Excavation for foundation including sorting out and stacking

off useful materials and disposing of the excavated stuff up to

1 50 mt. lead and all lift, watering etc.comp. (A) loose or soft

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 mt. Depth 42.00 C.M. 123.13

SMC SOR-PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles)

2 & disposal of the surplus excavated soil as directed within a

lead of 50 M. For following diameter of piles.

250mm dia 0.00 Rmt 334.80

SMC SOR , ITEM NO. 94, PG. NO.

Providing & Filling Rubbles including hand packing & filling

interstics with Quarry Spalls complete for all leads and lifts.

SMC SOR , ITEM NO. 22, PG. NO. 3 0.00 C.M. 1094.11

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand :

4 Crushed stone agg 20m.m Nominal size) &curing comp. excl.

cost of form work in :(a) foundation & Plinth

(A) Foundation 3.50 C.M. 3095.25

(C) Grade Slab 0.50 C.M. 3095.25

SMC SOR, PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement : 2 sand :

4 graded stone agg. 20 mm nominal size) & curing comp.

5 Includ. cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

(C) Grade slab 7.50 C.M. 3741.69

(SOR SMC Pg No. 9 It No. 95)

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

6 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement

(A) foundation, footing, base of columns and mass concrete 5.50 C.M. 4332.50

(SOR SMC - MIX DESIGN PG. NO-14)

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

7 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12930.68

(2) Having cross sectional area more than 0.085 sq. mt .up to

(3) Having cross sectional area more than 0.12 sq. mt. 3.00 C.M. 9288.03

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 9083.57

(2) Having cros sectional area more than 0.08 sq. mt and upto

(3) Having cross sectional area more than 0.12 sq. mt . 8.00 C.M. 7067.84

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

8 crushed stone agg. 20 m.m Nominal size)& curing comp. incl.

cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 2.50 C.M. 4085.83

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

9 R.C.C. work incl. bending, binding & placing in position

Upto G.L./P.L. 2683.00 Kg. 77.29

(SOR SMC Pg No. 1 It No. 8)

Providing & construction brick work using Fly Ash bricks

having crushing strength not less than 35 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. -

(SOR SMC Pg No. 2 It No. 16) 6.50 C.M. 4729.83

DESCRIPTION QUANTITY UNIT AMOUNT

Filling available excavated earth (excluding rock) in trenches.

11 plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidating each

(SOR SMC Pg No. 1 It No. 10) 64.00 C.M. 136.92

Filling in foundation and plinth with murrum or selected soil in

12 layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

(SOR SMC Pg No. 1 It No. 11) 78.00 C.M. 301.78

carrying out plinth treatment to post construction/existing

structure by spraying chemical solution for termite control

treatment including labour and material consisting with ISI

13 specification using chlordene and chiorpurfiles 20 EC as per

6131_part II concentration weight one litter give 1%

concentration inclusive of one litter chemicals emulsions

application at the rate of 5 litter chemicals /sqmt of surface is

recommended as per IS. 86.00 S.M. 87.03

(SOR SMC Pg No. 12 It No. 127)

Providing & Applying 20mm. Th. Heavy Roller plaster on walls

or similar surfaces at all floor levels consisting of 12 mm av.

Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th.

14 Finishing coat of C.M. 1:1 (1cement: 1 sand) apply thick

cement slurry and apply roller horizontal as well as vertical (

two times ) up to good quality and size of grain in elevation as

per directed by engineer incharge.

(SOR SMC Pg No. 3 It No. 28) MR 13.00 S.M 324.00

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux

or Apex Ultima of Asian Paint including applying exterior

acrylic primer coat as per manufacturers specification and

directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as

directed by the architects and manufacturers

Surface Preparation : surface is thoroughly clean, dry and free

15 from all loose dirt, chalk, grease, fungi,algae and flaking paint.

This can be achieved by brushing with a wire/ stiff coir brush,

followed by water jetting if required. Fill up all minor cracks

and defects with white cement and sand mixture in the ratio

1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean

the surface thoroughly using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and

allow it to dry for 4-5 hours.Application of putty is not

SMC SOR , COLOR WORK ITEM NO.- 17 Page No. 16 13.00 S.M 82.00

DESCRIPTION QUANTITY UNIT AMOUNT

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

16 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12930.68

Terrace Floor 0.00 C.M. 12970.28

(2) Having cross sectional area more than 0.085 sq. mt .up to

Ground Floor 0.00 C.M. 11253.32

Terrace Floor 0.00 C.M. 11292.92

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 3.51 C.M. 9288.03

Terrace Floor 1.60 C.M. 9327.63

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 9083.57

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 0.00 C.M. 8155.37

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 8.00 C.M. 7067.84

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7965.38

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7377.92

(3) Having more than 13 cm. Thickness

Ground Floor 11.50 C.M. 6793.97

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 1.00 C.M. 9963.33

(SOR SMC Pg No. 2 It No. 13)

Ground Floor 1.60 C.M. 7119.46

(SOR SMC Pg No. 2 It No. 13)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

17 crushed stone agg. 20 m.m Nominal size)& curing comp. incl.

cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 5.50 C.M. 4085.83

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

18 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement

(A) Stair cases including landing etc.

Ground Floor 0.00 C.M. 7765.80

(SOR SMC - MIX DESIGN PG. NO-14)

(B) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9483.21

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & fixing IS Mark TMT Bar FE 500 / FE 500d

19 reinforcement for R.C.C. work incl. bending, binding & placing

in position etc.comp.---

Ground Floor 3101.00 Kg 77.29

Terrace Floor 788.00 Kg 78.34

(SOR SMC Pg No. 2 It No. 15)

Providing & construction brick work using Fly Ash bricks

20 having crushing strength not less than 35 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp.

Ground Floor 43.00 C.M. 4729.83

DESCRIPTION QUANTITY UNIT AMOUNT

Terrace Floor 10.00 C.M. 5018.55

(SOR SMC Pg No. 2 It No. 16)

Providing & constructing Half brick masonary in Fly Ash bricks

21 having crushing strength not less than 70 kg/sq.cm in c.m 1:4

(1 cement: 4 sand) curing etc complete.

Ground Floor 24.00 S.M. 712.81

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 10mm.th.cement plaster in single coat

on brick/ concrete walls similar surfaces for plastering &

22 finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 384.00 S.M 199.28

Terrace Floor 74.00 S.M 228.84

(B) for ceilings and soffits of stairs

Ground Floor 87.00 S.M 225.34

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality chicken

wire mesh (FRP / PVC)at junction of brick work and RCC work

23 or two dissimilar surfaces, at all heights fixed by nails, rowal

plugs or tag by cement mortar 1:3 before applying the plaster,

including curing, scaffolding all complete as directed.

Ground floor 24.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

Providing & Applying 20mm. Th. Heavy Roller plaster on walls

or similar surfaces at all floor levels consisting of 12 mm av.

Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th.

24 Finishing coat of C.M. 1:1 (1cement: 1 sand) apply thick

cement slurry and apply roller horizontal as well as vartical (

two times ) up to good quality and size of grain in elevation as

per directed by engineer incharge.

Ground Floor 187.00 S.M 324.00

Terrace Floor 150.00 S.M 324.00

(SOR SMC Pg No. 3 It No. 28) MR

Providing throating or plaster drip and moulding it to R.C.C.

chajja etc.comp.. For all floor

Ground Floor 40.00 R.M 43.74

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line and

level etc. Comp. For all Floor (M.R.)

Ground Floor 40.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in flooring treads of steps and landing laid on a bed of 12mm

27 thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing

with flush pointing in white cement.

Ground Floor 87.00 S.M 1092.37

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

Ground Floor 85.00 S.M 1135.80

(SOR SMC Pg No.4 It No. 45)

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria,Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

29 sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with colour cement slurry including finished with flush

pointing & cleaning the surface etc. comp.Size 24" x 24" For

Ground Floor 5.00 S.M 1467.72

(SOR SMC Pg No.4 It No. 43)

DESCRIPTION QUANTITY UNIT AMOUNT

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

30 laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Ground Floor 0.00 S.M 1019.39

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished kota stone slab 25mm thick in

risers ofsteps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed

with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc.complete.

Ground Floor 0.00 S.M 1130.79

(SOR SMC Pg No.4 It No. 33)

Providing and constructing sandwitch type Granite stone

platform 0.6 mt. wide & 0.75 mt. height, including one end

side granite stone (Double Polish) of 1.25 mt. height & front

granite stone patti of 10 cm wide, vertical partitions of half

32 B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with

finishing smooth with cement slurry as required and Stainless

Steel sink of 0.45 mt x 0.45 mt size of approved quality and

make with required all fitings & fixitures etc. comp as per

instruction given by site in charge at all floors. (Basic rate of

Granite Rs.1,200.00 / S.M.)

Ground Floor 0.00 R.M. 3128.00

First Floor 0.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and W.C. At all

floor levels, after completing plumbing work of pans,

pipes,traps etc.with cinder or fly ash as directed by Engineer

in charge etc. comp.For all Floors.

All Floor 0.00 S.M 500.00

(SMC SOR,Pg No.6, It No. 61) MR

Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows &clearstory windows incl. Indian teak wood

frames of finished size 12cm x7cm.incl. anodized aluminum

fixtures & fastenings incl. Primer coat of approved quality &

two coats of oil painting etc. For all Floor (A) Fully Panelled

All Floor 9.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

Providing and fixing FRP frame size 125x65 mm and 35 mm

thick FRP shutter with wood grain raised panneled design

finish shutter having extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter & frame is to filed up

with injected polyurethane foam done in situ along with

embedded wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S. hinges with fastener sleeve &

alluminium fixtures & fasteningsFor all Floors. 5.00 S.M 2805.78

(A)'Same as Above But Without Frame

(SMC SOR,Pg No.5, It No. 55)

(SMC SOR, Pg No.5 It No. 56)

Providing & fixing 35mm.th. Flush Door Solid Double Core

type Both Face water proof Ply Vennered & 1.5 mm

th.laminate shall be pasted on both side with adhesives as

36 specified by the manufacturers. The laminate shall be as per

approved shade & texture, of make incl. Sal wood frames of

finished size 12cm x 7cm.incl. S.S. Hinges with nessary screws

& Anodized aluminum fixtures & fastenings For all Floor 0.00 S.M 3720.00

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 5.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

DESCRIPTION QUANTITY UNIT AMOUNT

Providing and fixing window having extruded aluminium

colour anodized section frame main outer size 63.50 x

x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt)

horizontal Two track member size 61.85 mm x 31.75 mm x

1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.)

vertical member of size 61.85 mm x 31.75 mm x 130 mm (of

jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding

37 shutters of horizontal member size 40 mm x18 mm x 1.29 mm

( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

Kg/mt) with 5 mm thick tranparent bronze colour tineted float

glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc. complete for window.For all Floors. 0.00 S.M 1705.67

(A) Same as above but colour anodized 0.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.17

Providing and fixing window having extruded aluminium

colour anodized section frame main outer size 95 mm x

mm x 1.17 mm (of jindal section no:2459 @ Wt. of

Kg/mt), horizontal Three track member size 92 mm x

mm x 1.30 mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt),

vertical member of size 92 mm x 31.75 mm x 1.50 mm (of

jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters

of horizontal member size 40 mm x 18 mm x 1.29 mm (of

jindal section no:8947 @ wt. of 0.456 kg/mt), vertical member

of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8949

@ wt. of 0.456 kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminium

fittings & fixtures and transparent silicon sealant glass fixing to

frame as per details etc. 0.00 S.M 1591.87

(A) Same as above but colour anodized

All Floor 18.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A),Pg No.17

Providing and fixing standared extruded ofalluminium section

of size 63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with

39 colour Powder Coated alluminium frame for ventilation with

mm thick frosted glass as details etc complete for Ventilation

A) Same as above but Colour anodized 1.50 S.M 1175.56

SMC SOR Alluminium Work ITEM NO.4A,Pg No.17 MR

Providing & laying granite slab 18 mm thick in Window-Door

seal,Frames Etc laid on 10 mm thick cement mortar 1:4 (1

Cement: 4 Coarse sand) with necessary adhesive material and

finished with flush pointing in white or colour cement,

including rubbing & polishing comp. (Basic Rate: Rs.

1000.00/S.M.).For all Floors.

For all Floors. 32.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

41 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 296.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Providing & fixing Powder Coated Aluminium partly glazed and

partly panelled partition using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent approved make

having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt & Middle

section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float glass

of approved make including all other necessary fittings and fixtures.

Entire work will have to be made water proof using necessary

rubber sectioned wherever required. Gaps all round the frame to be

filled with approved water proof sealent. Bottom portion of doors

both side to be covered with 12mm thick prelaminated particle

board of approved make and quality and as per design.

(A) Same as above but Colour anodized

For all Floors. 0.00 S.M 2400.00

SMC SOR Alluminium Work ITEM NO.7(A),Pg No.17 MR

DESCRIPTION QUANTITY UNIT AMOUNT

Providing & fixing partly panel & partly glass Powder Coated

Aluminium doors with aluminium section of Hindalco, Jindal

Narmada,Banco or Equivalent approved make having Poder Coated

outer frame Leg Partition section of 63.50 mm x 38.10 mm having

weight 1.158 kg. / R.M. shutter section having size 83.5 mm x

44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.)

43 door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top

hing side:0.974 kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt.

0.109 Kg./ Mt.) with 5mm thick sheet glass in acid frogting and

mm thick prelaminated sheet of Greenlam, Panama or archid make

as approved by Engineer-in-charge including fixing brass pivot,

handle, lock etc. complete.

(A) Same as above but Colour anodized

For all Floors. 0.00 S.M 3237.00

SMC SOR Alluminium Work ITEM NO.6(A),Pg No.17 MR

Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

44 required spacing & frame around

square or round bars with round headed bolts & round

headed bolts and nuts or by screws incl. Priming coat of Red

(A) Plain grill

For all Floors. 360.00 Kg. 109.41

SMC SOR, PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to

45 give an even shade including cleaning the surface of all dirt,

dust and other foreign matters. (A) For plain grill For all Floor

For all Floors 18.00 S.M 68.57

SMC SOR, colour works,item no.-8,Pg No.15

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel

required size, on the top of the floor or the side of waist slab

with suitable arrangement as per approval of Engineer-

incharge, (for payment purpose only

weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.)

SMC SOR, ITEM NO 120,Pg No.11, MR 0.00 Kg. 450.00

(1) The whole work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma

duly stamped (2) The rate shall include for work at all floors &

conducting water proof test as directed. (M.R.)

B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for treatment

of roofs, balconies, terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using

kg/sqm of cement admixed with proprietary water proofing

compound comforming to IS:2645 over the R.C.C. slab including

cleaning the surface before tratment.(b) Laying cement concrete

using broken bricks/brick bats 25 mm to 100 mm size with 50% of

cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645 ,brick

bats is finally covered by jointless cement plaster 20mm th. in C.M.

1:4 added with special water proofing compound confirming to

IS:2645 & top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to height of about

300 mm in a shape of quarter round vata Incl. curing etc. Comp.

With average thickness of 120 mm and minimum thickness at khurra

as 65 mm.(c) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and for final

test. All above operations to be down in order and as directed and

specified by the engineer-in-charge. With average thickness of

mm and minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.)

DESCRIPTION QUANTITY UNIT AMOUNT

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above

operations to be down in order and as directed and specified by the

engineer-in-charge. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm. (Cement consumption

0.511 Bags / S.M.)

Terrace and staircabin top 93.00 S.M 511.00

SMC SOR, PAGE NO 7 IT NO 62 B M.R.

(A) Providing and laying water proofing treatment to vertical

and horizontal surfaces of depressed portions of W.C.,kitchen

and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water

proofing compound confirming to IS:2645 about 25 mm. th' in

the floor of the depression & about 18mm th' On the side

walls of the depression up to the floor level, water proofing

plaster about 18 mm. th' be continued on the walls above the

floor level for a height of 600 mm. with surface suitable to

receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm

nominal size spreading @0.008 C.M./S.M., thoroughly

embedad in plaster layer.

as per specifications & instructions of Engineer in charge

(Cement consumption 0.316 Bags / S.M.)

For all Floors 0.00 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

Providing and laying broken china mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glased tiles of to be

laid over cementr morter 1:3 to plain or slope and to be

48 tempered to bring morter crème out up to surface using white

cement including grounding off jnctions and extending them

up to 15 cm along the wall, clearing with water and oxalic acid

etc as directed.

SMC SOR, PAGE NO 12 IT NO 131 93.00 S.M 779.70

Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 458.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 87.00 S.M 40.59

SMC SOR ,coiour works,Pg No.15,item no.-4

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

50 surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 458.00 S.M 83.36

(B) for ceilings and soffits

For all Floors 87.00 S.M 83.36

SMC SOR , coiour works,Pg No.15,item no.-5

DESCRIPTION QUANTITY UNIT AMOUNT

Providing & applying two coats of weather shield max paint

(3 coats may be required in case of darker colours.)of ICI Dulux

or Apex Ultima of Asian Paint including applying exterior

acrylic primer coat as per manufacturers specification and

directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as

directed by the architects and manufacturers. Surface

Preparation : surface is thoroughly clean, dry and free from all

loose dirt, chalk, grease, fungi, algae and flaking paint. This can

be achieved by brushing with a wire/ stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of

paint must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes. Priming: Apply a liberal coat of

exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended. Minimum 4-6 hours

duration is required between each coat of weather shield max

paint.For all Floors.

For all Floors 337.00 S.M 82.00

Providing and applying textured plaster as per design of ICI

Dulux or of Asian paint as per manufacturers specification and

directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as

directed by the architects and manufacturers.

SMC SOR, coiour works,Pg No.17,item no.-17

Providing & laying granite slab 18mm thick in flooring, treads

of steps and landing laid on bed of 20mm thick cement mortar

1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid and

finished with flush pointing in white or colour cement

including rubbing and polishing complete. (Basic Rate:-

For all Floors. 2.00 S.M 2410.00

SMC SOR PAGE NO 4,IT NO 39 M.R.

Providing & laying granite slab 18mm thick in skirting, risers of

steps,dedo and pillars laid on 10mm thick cement mortar 1:4

53 (1 Cement : 4 Coarse sand) and finished with flush pointing in

white or colour cement including rubbing & polishing comp..

(Basic Rate:- Rs.1347.46/S.M.)

SMC SOR PAGE NO 4,IT NO 40 M.R. 1.00 S.M 2449.00

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S.

bar bent to shpe with hooked ends to RCC slabs curing, layig

including painting the exposed portion of loops, all as per

standard design complete.

For all Floors. 36.00 Nos 135.47

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat

55 of red lead paint

(A) in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross beams,hip

& trussed purlins connected to common raffers & the like. For

For all Floors. 0.00 Qtl. 9108.48

SMC SOR ,Pg No.9,IT NO 98(A)

Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron

diagonals 20 x5mm size with top & bottom rails of T-iron

40x40x6mm. with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl. applying a

priming coat of Redlead paint etc. comp.

Ground Floor 11.00 S.M 6158.35

SMC SOR , PAGE NO 5, IT NO

Providing and fixing rolling shutters of approved make made

of 80 mm wide M.S. laths inter locked together through their

entire lenght and jointed together at the ends by end locks

mounted on specially designed

57 pipe shaft with bracket plates, guide channels and

arrangements for inside and outside locking with push-pull

operation including the cost of hood cover and spring etc.

complete. (B) Shutters having width 3.5 M

Ground Floor 0.00 S.M 4546.01

DESCRIPTION QUANTITY UNIT AMOUNT

SMC SOR , PAGE NO 13, IT NO

Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for Shelve joined with

grey/White cement slurry (1:1) incl. Rubbing & polishing etc.

complete. (M.R.) (Basic Cost Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 0.00 S.M 1050.00

59 Wall Vinyl Sticker 40.00 SQ. FT. 28.00

SMC SOR, PAGE NO.13,IT NO 146 (MR)

Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

SMC SOR, PAGE NO.13,IT NO 147 (MR)

Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

SMC SOR, PAGE NO.13,IT NO 148 (MR)

62 5mm PVC sheet Eco Vinyl (Any size) 40.00 SQ. FT. 55.46

SMC SOR, PAGE NO.13,IT NO 149 (MR)

Decorative theme base designing & painting with all

waterproof materials 0.00 SQ. FT. 63.00

SMC SOR, PAGE NO.13,IT NO 150 (MR)

Water Supply & Sanitation

Prov.& Fixing water closet squatting pan (Indian type

W.C.pan) at all floor levels, size 580mm incl. 100 mm size

"P'or "S" trap for water closet squatting pan joining the trap

with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc.

Comp.(A) Vitreous china long pattern of approved colour For

For all Floors. 0.00 Nos. 1471.41

SMC sor Page no7 It No.

Providing and fixing Wash Down Water closet European type

W.C. pan with integral P or S trap including jointing the trap

65 with soil pipe in cement mortar 1:1 (1 cement : 1 find sand)

(seat and cover to be measured and paid for separately) (A)

Viterous china pattern - I (i) in approved colour

For all Floors. 2.00 Nos 1356.81

SMC sor Page no7 It No.

Providing and fixing plastic seat and cover for wash down

66 water closet with C.P. brass hinges and rubber buffers (B)

Plastic seat and cover

For all Floors. 2.00 Nos 291.33

SMC sor Page no7 It No.

Providing & fixing wash basin with single hole for pillar tap at

all floor levels, with C.I. or M.S. Brackets painted white incl.

cutting holes & making good the same incl. fittings such as

pillar tap, capstan head screw down high pressure with

screws, shanks & back nuts, C.P. Brass waste trap, screw down

stop tap 15 mm. dia. etc. complete. (A) Vitreous china flat

back wash basin 550 mm.x 400 mm. size in approved colour

For all Floors. 4.00 Nos 2132.94

SMC sor Page no7 It No.

Providing & fixing 600 mm.x 450 mm. mirror of superior glass

at all floor levels, mounted on 6 mm. th. A.C. sheet or

plywood sheet & fixed to wooden plugs with C.P.brass screws

and washers etc. For all Floor

All Floor 2.00 Nos 859.41

SMC sor Page no7 , It No.72

Providing & fixing C.P. brass pillar cock with copper

connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat. No.: F650003, Jaquar FLR-5011N

For all Floors. 2.00 Nos 1457.97

SMC sor Sanitary Items,Page no21, It No.

Providing & Fixing C.P. Brass screw down bib tap at all floor

levels, polished bright etc. comp.-(A) 15mm dia. For all Floors

All floor 4.00 NO 186.83

SMC sor Page no 8 It No.

Providing & Fixing chromium plated brass half turn flush cock

71 at all floor levels, of approved quality incl. fixing in pipe line

etc. Comp.-- 25 mm dia

All floor 4.00 NO 263.77

SMC sor Page no 8 It No.

DESCRIPTION QUANTITY UNIT AMOUNT

Providing & fixing 15mm C.P. brass angle valve (Stop Cock)

with C.P. copper connecting pipe 450 mm long and nuts,

washer and brass flange complete, including cutting and

making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat.

No.: F440020 F850094, jaquar CON 053 KN

For all Floors. 4.00 Nos 1564.36

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished wall

flange at end of bars with heavy duty anchor fasteners &

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN

1121N ,HindWare F880007

For all Floors. 2.00 Nos 924.24

SMC sor Sanitary Items,Page no21,It No.

Providing & Fixing stainless steel recessed type Soap dish of

74 approved make. Including providing & fixing screws, washers,

cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-

1131N,HindWare F880011

For all Floors. 2.00 Nos 839.91

SMC sor Sanitary Items,Page no21,It No.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

75 mm diameter with jali of the following nominal diameter of

75 self cleaning design with C.I. scread down or hinged grating

including the cost of cutting and making good the walls.

All floor 10.00 Nos 586.27

SMC sor.Page no 8,It No.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

13592 (Type"B") of Prince/ Supreme/ Jain/ Astral/ Tulsi/

Finolex make for soil and waste discharge system at all floor

levels incl. All fixtures like bends, tees,shoe etc. jointed with

resin of approved brand & manufacture etc. comp.(M.R.)

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex

77 make for rain water at all floor levels incl. fixtures like bends,

tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

SMC sor ,Page no 8, It No. 85 M.R.

Providing and fixing in position P.V.C. cowl vent to pipes of

prince, suprime, jain Or Eqivalent make etc. comp (M.R).

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC drainage

pipes for concealing with cement plaster 20 mm avg

thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per

instruction given by Eng. incharge. For

75mm PVC pipe 40.00 R.M 173.00

SMC sor- Page no.8, It No. 93 MR

Providing, Laying and jointing on true line and level UPVC pipe

(SCH-40) line of prince/Supreme/Jain/Astral/ Tulsi/Finolex

make including fittings make or equivalent as approved by

80 angineer-in-charge. Pipe shall be fixed on the wall the help of

clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

SMC sor Page no 8 It No.

DESCRIPTION QUANTITY UNIT AMOUNT

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/

Jain/ Astral/ Tulsi/Finolex make for water supply line at all

floor levels incl. fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc. comp. Pipe shall

be fixed on the wall the help of clamp at every two meter C/C

or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

SMC sor Page no8 It No. 87 MR

Providing and fixing M.S. holder bat clamps at all floor level,of

82 approved design to C.I. or S.C.I pipes including cost of cutting

holes and making good the wall etc. comp. (M.R)

SMC sor- Page no8, It No. 90 MR

Providing and fixing G.I. holder "Z" clamps at all floor level,of

83 approved pipes including cost of cutting holes and making

good the wall etc. comp. (M.R)

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

Providing and fixing gun metal check or non return full way

wheel valve at floor levels,etc. complete.

SMC sor Page no8,It No.

Providing and fixing abonite ball cock of approved quality as

directed etc. comp.

SMC sor- Page no 8,It No.

Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe in

86 cement mortar in proportion 1:1 of following nominal internal

diameters including testing of pipes and joints etc. complete.

SMC sor- Page no.8, It No.

SMC Storm drainage SOR 20-21, Page no1 It No.1

Providing and fixing s.w. Gully trap with C.I. gratting brick

masonary chamber and water tight Pre cast R.C.C.cover of

87 300mm X 300mm size (inside) including plastering smooth

inside and outside 15 mm thick in C.M 1:3 etc. comp.i) square

mouth traps (A)300 MM X 300 MM Size - P type.For all Floors. 4.00 Nos 1098.05

SMC sor,Page no 7, It No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside & outside to

88 exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement:

Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. for single pipe.'.(A) Precast RCC

heavy duty Cover instead of C.I. Cover 0.00 No. 3166.77

(A).Same as above but Precast RCC heavy duty Cover instead

of C.I. Cover 4.00 No. 2915.61

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 233.85

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with

89 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm

size), Foundation concrete 1: 5: 10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. Inside

dimension, 455 x 610 mm &450 mm deep for single pipe 0.00 No. 2932.93

DESCRIPTION QUANTITY UNIT AMOUNT

(A).Same as above but Precast RCC heavy duty Cover instead

of C.I. Cover 3.00 No. 2681.76

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39

SMC sor - Page no8,It No.76

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt.

90 Size having weight not less than 35 Kg. etc. complete.

SMC sor- Page no.8, It No. 83 3.00 NO 958.17

Providing and fixing G.I, Rain water spout of 50 mm dia and

SMC sor- Page no6 It No. 64 2.00 NO 101.91

Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and 15mm

92 dia. C.P. spreader,32mm dia CP bottle trap and pipe to wall

with C.P. flange complete including cutting and making good

the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-

WHT 13261H ,HindWare BACK SMALL 60001 0.00 NO 2535.70

SMC sor- Sanitary Items,Page no.21, It No.8

Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined with

grey/White cement slurry (1:1) incl. Rubbing & polishing etc.

complete. (M.R.)( Basic Cost Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 0.00 S.M 1050.00

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl.

boxing, centering, vibrating, curing & mixed with approved

water proofing cement compound or "CEMWET"or"PIDICRETE

LW"integral water proofing admixture as water proofing agent

to be mixed with 50 kg. cement bag shall be as recommended

by the manufacture of the water proofing material, concrete

work for top, bottom slab & side pardi for under ground Tank

& Item incl. Necessary excavation & refilling the available

94 earth, 15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in

C.M. 1:4 outside wall, inside R.C.C. pardi as per design,

10mm.th. water proofing cement plaster in C.M. 1:3 with

smooth finishing,watering etc.Comp.to all inner face of tank

curing etc. comp. incl. Locking arrangement, outlet, inlet,

overflow & wash out pipe arrangement as necessary & C.I.

Cover 0.60 x .045 weight not less then 35kg. etc. com. as per

structural drawing excluding Steel & as directed by Engineer-in-

Under Ground water Tank 25000.00 Lit 6.87

SMC sor - Page no6. It No.

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell make at all floor levels, in

95 flooring, treads of steps & landings laid on a bed of 12 mm. Av.

Th.C.M.1:3 (1cement : 3 sand) finished with flush pointing in

white cement etc.com. For all floors

Under Ground water Tank 13.50 SM 900.29

SMC SOR, Page no4, It No.

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell make at all floor levels in

skirting risers of steps & dado on 10 mm. th. C.M.1:3 (1cement

:3 sand) including necessary cement paste for fixing and joined

with white cement slurry etc.complete. For all floors

Under Ground water Tank 30.00 SM 932.02

SMC SOR, Page no4, It No.

Providing & fixing IS Mark TMT FE 500D reinforcement for

97 R.C.C. work incl. bending, binding & placing in position etc.

comp. Upto G.L./P.L.

Upto G.L./P.L. 1000.00 Kg. 77.29

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated

Sintex/Super/Reno PVC (ISI) mark water tank of required

capacity each with all necessary fittings & connection etc.

complete on terrace. 5000.00 Lit 3.95

SMC SOR- Page no 8, It No.

Fire extinguisher - CO2 Gas type 4.5 kg.

Supply, installation and testing of CO2 Gas fire extinguisher

with necessary hardware and consumables.

Standard - Confirming to IS:15683-2006 with ISI mark.

UOM - Price per each No. Make - Kanex / Safex / Secure Zone

DESCRIPTION QUANTITY UNIT AMOUNT

SMC SOR- Page no 13, It No.

Fire extinguisher - ABC powder type 6 Kg.

Supply, installation and testing of ABC powder fire

extinguisher necessary hardware and consumables.

Stored pressure mechanism.

Charged with MAP-50% (ABC) Dry powder.

with wall mounting clamp.

UOM - Price per each No. Make - Kanex / Safex / Secure Zone

SMC SOR- Page no 13, It No.

INTERNAL ELECTRIFICATION

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length

in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type,

101 erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose / H.D.Connector as

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Cat. III 5.00 Pt. 415.00

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Cat. III 20.00 Pt. 445.00

Point wiring for Tissino / Modular secondary light point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires, in below type of pipe to be erected complete with

102 earth continuity and necessary connection with primary light

with accessories erected on Metal / PVC / wooden box

covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for

open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete 0.00 Pt. 121.00

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete 0.00 Pt. 150.00

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted

and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Cat. III 2.00 Pt. 593.00

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Cat. III 10.00 Pt. 623.00

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

DESCRIPTION QUANTITY UNIT AMOUNT

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Cat. III 8.00 Pt. 691.00

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

105 single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall /

ceiling with following type accessories

Cat. III 5.00 Pt. 239.00

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

106 base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge.

(7) Blank Plate Single

Cat.III 20.00 Ea. 24.00

(8) Computer RJ-45 socket

Cat.III 5.00 Ea. 153.52

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

107 erected with necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

(A) (A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm 200.00 Mtr. 59.00

(b) 2 wire 2.5 sq. mm 200.00 Mtr. 78.00

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

109 following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(A) (A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 0.00 Mtr. 106.00

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with FRLS

PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size

of conductors & nos.of pairs. With necessary connections.

[A] Conductor Size 0.5 mm

(2) Two Pairs 50.00 Mtr. 19.00

Supplying & erecting approved make LAN cable of following

size in existing pipe as per direction

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white

112 front plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Cat. III 4.00 Ea. 1081.71

LT SWITCHGEAR, DISTRIBUTION BOARD & LT PANEL

DESCRIPTION QUANTITY UNIT AMOUNT

Supplying KITKAT pattern porcelain cut-out fuse with base of

following current capacity erected on existing block board.

providing and erecting Miniature circuit breaker single pole 6A

to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

Cat.III 10.00 Ea. 111.00

Providing & erecting 240 V MCB double pole switch for motor

115 & inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp.

Cat.III 3.00 Ea. 297.00

Cat.III 1.00 Ea. 327.00

Sheets steel powder coated enclosure suitable for

incorporating One/Two nos. MCB. 3.00 Ea. 175.00

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

118 single phase 240 V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

Cat. III 3.00 Ea. 1950.00

(ii) 40Amps. DP

EARTHING PROTECTION

Providing and erecting HOT deep Galvanised iron strip wire

Supplying & erecting in earthpit of minimum bore dia. 225mm

size approved make Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 80 mm having

80-200 Micron galvanising, Inner pipe dia of 40 mm having

200-250 Micron galvanising, connection terminal dia of

mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover (A)(approved make OEM has to submit test

120 certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound

:- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by

[B] For Electrical installation up to 11 KV located in other

than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg. 1.00 Ea. 7025.00

CABLES, WIRES & TERMINATION

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables

(B) 4 core 6 Sq. mm 0.00 Mtr. 123.00

DESCRIPTION QUANTITY UNIT AMOUNT

(C) 4 core 10 Sq. mm 50.00 Mtr.

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

122 necessary connecting accessories of same material at

required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable

(A)50 mm outer dia 50.00 Mtr. 62.00

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

(B) 2 to 4 core 6 Sq. mm 0.00 Ea. 38.00

(C) 2 to 4 core 10 Sq. mm 2.00

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Providing and erecting ISI marked PVC insulated PVC Sheathed

125 Flat flexible Submersible copper cable approved make of

following Size.

(B) 3 Core x 2.5 Sq. mm. 100.00 Mtr. 103.00

INDOOR LIGHTING

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Cat-lll 20.00 Ea. 370.00

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

Cat-lll 2.00 Ea. 164.00

FANS & RELATED ITEMS

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

230 volt A.C. 50 Hz 1200 mm sweep complete having

127 3blades with aluminium blades with , canopy & 30 cm. down

rod erected with earthing.(Make shall be approved by

Engineer in charge))

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary

Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low noise

129 operation suitable for medium duty having following dia size

and maximum speed in RPM

[A] 305 mm dia 900 RPM

Cat.II 2.00 Ea 2034.00

WATER COOLER & PURIFIER

DESCRIPTION QUANTITY UNIT AMOUNT

Providing & erecting water cooler having storage capacity

Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of

45˚ C. The outlet temp. of the water should drop by 15˚C

within a hour, The water cooler should be comprising of

hermetically sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating, coil, thermostats, relay

etc.complete with necessary inlet & outlet connection. The

body of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 psi inline type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH capacity &

erected as directed

[C] 50 Ltr / Hr with 150 psi 2 nos booster pump Ea.

PUMP SET & STARTER

Supplying and erecting Direct On-line Electronics Starter with

2-5/4-10/8-14/10-16 Amp. Rating relay (variable current

setting) directly operated in totally insulated elegant

enclosure and 18 Amp. Rating power relay with start - stop

button for single phase operation up to 3 HP as per complete

erected on P.W. Block with following features.

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]

Cat-lll 1.00 Ea. 1588.00

Providing & erecting open well type horizontal mono block

133 pump set with stainless steel body having following

(C) 1 H.P. single phase open well motor pump set suitable for

185 LPM discharge @ 25 mtr. head, suitable for 32 mm dia.

Delivery pipe with control panel.

S.I.T.C. of single phase submersible pump set suitable for

mm size or more dia bore well having motor capacity and

discharge as under with necessary panel box. Lifting and

Lowering taken extra.

(a) Motor rating 1 HP (12 stage) pump having capacity of

LPM at 43 to 45 mtr head suitable for 32 mm dia. delivery pipe

Cat.III 1.00 Ea. 15441.00

Lifting of submersible motor pump set complete with required

No .& size of casing pipes by means of proper chain pulley

block and pipe. wrenches. Job includes stacking of pipes

chronologically after due checking of threads.

(A) Up to 60 mtrs. 1.00 Per Job 1695.00

Lowering of submersible motor pump set at the depth of

following ,complete with required. Nos. and size of casing

pipes erected by means of proper chain pulley block & pipe

wrenches after checking of threads of each pipe with coupling

to take the load of the pump set and pipe assembly filled up

(A) Up to 60 mtrs. 0.00 Per Job 1695.00

Supplying of following size of STANDARD UPVC column pipe

with coupler and wire lock

Supply of following size of TOP & BOTTOM accessories i.e.

Adaptor set (CI) long, pump guard set, starter pipe Rubber ring

for submersible pump & UPVC column pipe as directed by

Engineer - in - charge with necessary plumbing as desired.

[B] 32 mm dia 1.00 Per Set 458.00

Supplying & erecting approved make Automatic liquid level

controller 6A. with sensor testing as per instruction of

139 Engineer in charge on site complete with wiring connection

with existing wires , with copper conductor from pump to

upper and lower tank. 1.00 Ea. 2332.00

EXTERNAL ELECTRIFICATION

DESCRIPTION QUANTITY UNIT AMOUNT

Providing and erecting street light pole bracket comprising

main B Class GI pipe of 4.2 cm/require outside dia. complete

with suitable B Class G.I sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm / 80mm. / require size pole top

having sufficient fasteners for fixing the brackets and having

spread of 1 mtr. length with suitable rise as per site condition

& suitable welded stiffener reducer and nipple with check nut

complete painted with one coat of Red oxide / PU base primer

and two coats of Aluminium / PU paint. paint with following

[A] Single Arm bracket 1 Mtr 1.00 Ea 556.00

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminium housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

(ii) 15 to 24 Watts

Cat-lll 1.00 Ea. 1805.00

(iii) above 24 to 36 watts

Cat-lll 0.00 Ea. 2180.00

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN rail

142 for mounting mob & hinged doors as per requirement having

locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps&

earth bolt of following size of box.

(A) 300mm x 200mm x 100mm [deep] 1.00 Ea. 890.00

143 2 MP IP Dome/Bullet camera STQC Certified CCTV Model 8.00 Nos 3500.00

144 16 Channel NVR CP PLUS/ UNV 1.00 Nos 13500.00

145 6 TB Harddisk WD or SEAGATE 1.00 Nos 19000.00

146 16 Port POE Switch NETGEAR 1.00 Nos 16500.00

147 CAT-6 Shielded MOLEX/D-LINK 250.00 metre 65.00

148 BACK-Box with IO at Camera side STANDARD/MAXCOMM 10.00 Nos 50.00

149 25mm PVC pipe PRICISION/POLYCAB 150.00 metre 32.00

150 32 inch TV LG 1.00 Nos 25000.00

151 10m HDMI cable STACKER 1.00 Nos 3500.00

152 Keyboard (Wired) DELL 1.00 Nos 550.00

153 Keyboard (Wireless) DELL 1.00 Nos 750.00

154 Mouse (Wired) DELL 1.00 Nos 350.00

155 Mouse (Wireless) DELL 1.00 Nos 750.00

156 6U Rack ELIXIR/SUPERLINK 1.00 Nos 9500.00