Various works under RDSS

Amount

Supply as per TS, scope of work and approved drawings

Manufacture and supply of 11 KV overhead line as per technical specification, approved drawings and scope of work

9 M long Steel Tubular 410 SP-32 conforming to IS2713(Part 1)1980

10M long Steel Tubular poles 410 SP-44 conforming to IS2713(Part 1)1980

Support for LT overhead Line as per technical specification, approved drawings and scope of work.

Designing, Fabrication and supply of 7.50 M Long off 410 SP-09 steel tubular poles confirming to IS 2713 (Part 1 ) 1980

Manufacture and supply of Pre-fabricated galvanised steel items (zinc coating 610gms/sqm), like V cross arm, top clamp, DP cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp etc made of MS Channels, MS angle , MS flats of given sizes for over head structures as per technical specification, approved drawings and scope of work.

11 KV, 3 Wire, 2.8 m long cross arm made of MS Channel of size 125x 50 x 6 mm complete etc.

11 KV 'Y' - Type cross arm made of Angle of size 50 x 50 x 6 mm in radial structure of 3 arms of 0.8 m long 120° apart complete etc.

Angle bracing set 3.1 m long of size 65 x 65 x 6 mm complete with accessories nut / bolts etc.

MS Channel of size 100 X 50 X 4.7 mm for Air Break switch top bracket transformer mounting and Drop Out fuse (8 X 2 = 16 m) i/c nuts and bolts.

Manufacturing and supply of LT Aerial Bunched cable assesories

Suspension clamp assembly with eye hook and 2 nos MS Half Round clamp for suspending eye-hook with 3 nos nuts and bolts in complete set

Dead end clamp with eye hook and 2 nos MS Half Round clamps for suspending eye-hook with 3 nos nuts and bolts in complete set

Insulated connectors with covers

Manufacturing and supplying of GI earth clamps.

3Ph Distribution Box with associate accessories complete to connect household services as required.

Manufacture and supply of Stay Set (Galvanised) with 50x8 mm stay clamp, stay insulator (2 Nos.), MS anchor plate (300mmx300mmx5mm), nut bolts, 2 Nos turn-buckles, 1.8 m long, 18 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.

Manufacture and supply of Insulator and hardware as per technical specification, approved drawings and scope of work.

11 KV polymer Disc insulator 45 KN

11 KV polymer Disc insulator 45 KN hardware fittings

11 KV Polymer Pin Insulators with GI PIN

Manufacture and supply of Earthing arrangement as per technical specificatons, approved drawings and scope of work.

40 mm dia., 4.5m long GI pipe earth electrode with GI wire for pole earthing including salt charcoal and other accessories complete

8 SWG GI wire

11 KV, 3.1 m long Guard Bracket made of Channel of size 100 x 50 x 6 mm Complete etc

Copper plate earthing of transformer CBS & Battery charger including cost of copper plate size 600 X 600 X 6 mm & copper strip of size 25 X 4 mm i/c salt, charcoal etc. as required.

FOR 100KVA : Supplying, fitting and fixing of chain link fencing of 8 SWG GI wire (50X50X5mm mesh) i/c corner and end post with MS angle of size 50X50X5mm and length not less than 1800mm intermideate post of MS angle of size 40X40X5mm and D length not less than 1800mm i/c supplying, fittings and fixing of hook, eyebolt with nuts, staples bolts etcas required with 3 horizontal line of GL wire 10swg at top middle and bottom and with one vertical line to each fencing tight and erect complete i/c the cost of primer, painting of MS angle iron post in PCC base etc and two cot of Al pain on foundation of cost with PCC works of 1:2:4 CC as per approved drawing.

FOR 100KVA : Fabrication and Supply of standard size MS Gate as per approved drawing

Manufacture and supply of ACSR Conductors of following sizes with Jointing sleeves, binding materials, PG clamps, bi-metallic clamp, hardware etc for overhead line and jumpers as required as per technical specification, approved drawings and scope of work

6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel

6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit

Manufacturing and supply of LT Aerial Bunched Cable 1100 Volts

AERIAL BUNCHED CABLE 3 X 50 SQ.MM+1x25 SQ. MM.+1x16 SQ. MM.

AERIAL BUNCHED CABLE 3 X 35 SQ.MM.+1x25 SQ. MM.+ 1x16 SQ. MM.

AERIAL BUNCHED CABLE 3 X 120 SQ.MM. + 1x70 SQ. MM. +1x16 SQ. MM.

AERIAL BUNCHED CABLE 3 X 95 SQ.MM. + 1 x50 SQ. MM.+ 1x16 SQ. MM.

AERIAL BUNCHED CABLE 3 X 70 SQ.MM.+1 x50 SQ. MM.+ 1x16 SQ. MM.

Manufacture and supply of Safety Alert System as per technical specification, approved drawings and scope of work

Danger Plate of size 250 mm x 200 mm of thickness 3 mm. ( 11000V)

Danger Plate of size 250 mm x 200 mm of thickness 3 mm. ( 415V)

Anti climbing devices with G. I. thornwire / Barbed wires.

PAINTINGS & FINISHING WORKS

Supply of red oxide paint & 2 coats of paints on poles / equipment / metal surfaces on full rate basis.

Manufacture and supply of Augmentation of Distribution Transformer Substation using new outdoor type, oil immersed, naturally cooled pole mounted/ floor mounted (100KVA) distribution transformer (i/c transformer foundation materials) with all accessories as per scope of work, approved drawings and specifications:

11/0.433 KV Distribution Transformer 25 KVA 3 phase Aluminium wound DTR

11/0.433 KV Distribution Transformer 63 KVA 3 phase Aluminium wound DTR

11/0.433 KV Distribution Transformer 100 KVA 3 phase Aluminium wound DTR

Manufacture and supply of Designing Manufacturing & supply of weather proof pole mounted LT Pannel Board with adequate ratings of MCCBs/RCBs, space duly provided or mounting DT Energy & service connection distribution board within the same panel.

Manufacture and supply of 11 KV Distribution Class Lightening Arrester for DT as per technical specification, approved drawings and scope of work.

Manufacture and supply of 11 KV, 50 HZ Air Break Switch conforming to IS : 9920 (Pt - I to IV) with rated voltage 12 KV & rated normal current shall be 400 Amps. Provided with bimettallic connector on the incomming side to accommodate ACSR of sizes 20, 30, 50 Sqmm on the outgoing side.

Manufacture and supply of Outdoor, drop out expulsion type of 11 KV drop out fuse suitable for insullation in 50 HZ, 11 KV distribution system confroming to IS : 9385 (Pt - I to III) with rated voltage shall be 12 KV & rated current shall be 400Amps provided with a suitable arrangement these on 100 X 50 X 6 MM channel cross arm.

Manufacture and supply of 1.1 KV XLPE Aluminium Conductor, Stranded, armoured cable for connection of transformer LV bushing to Distribution Box and Distribution box to overhead line as per Scope of work, technical specification and approved drawings:

3.5CX35 sqmm aluminium conductor cable

3.5CX50 sqmm aluminium conductor cable

3.5Cx120 sqmm aluminium conductor cable

Supply and Installation of Pole mounted Signboard at Distribution Transformer Structure clearly representing about the work, date of commissioning, estimated cost, scheme, employer's details and rating in KVA (Specification same as Danger Plate of size 250 mm x 200 mm of thickness 3 mm.)

Manufacturing, supplying and installation of alluminium PG clamp

Manufacture and supply of AAA Conductors of following sizes with Jointing sleeves, binding materials, PG clamps, hardware etc for overhead line and jumpers as required as per technical specification, approved drawings and scope of work

AAA Covered Conductors, 120sqmm

11KV Wedge Connector for bare to CC connection

IPC(for connecting 70 sqmm CC to CC)

Erection as per Techincal Specification

Excavation of pole pit (of depth 1/6th of pole length) in all kind of soil/rock & Erection of following types of poles for 11 KV overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (coil and 8SWG GI wire), pole numbering including cement concrete foundation or refilling by boulders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size boulders mixed with excavated earth , Top muffing etc as per scope of work, approved drawings and specifications:

9 M long Steel Tubular poles 410 SP-32

10 M long Steel Tubular poles 410 SP-44

Erection of 7.5 m long of 410 SP-09 Steel single pole including excavation of pits in all kind of soil/rock complete foundation (including supply of foundation materials) , Top muffing , fixing of cross arm , pole top bracket, anticlimbing device and other accessories complete in all respect as per TS.

Erection, testing & commissioning of pre-fabricated galvanised steel items like V cross arm, top clamp, DP cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures and MS nuts, bolts & washers including painting by red oxide & aluminium paint as per technical specification, approved drawings and scope of work.

11 KV 'Y' - Type cross arm made of Angle of size 50 x 50 x 6 mm in radial structure of 3 arms of 0.8 m long 120° apart complete etc.

Angle bracing set 3.1 m long of size 65 x 65 x 6 mm complete with accessories nut / bolts etc.

Erection ,Testing and Commisioning of LT line with following LT Aerial Bunched Cable 1100 Volts

AERIAL BUNCHED CABLE 3 X 50 SQ.MM+1x25 SQ. MM.+1x16 SQ. MM.

AERIAL BUNCHED CABLE 3 X 35 SQ.MM.+1x25 SQ. MM.+ 1x16 SQ. MM.

AERIAL BUNCHED CABLE 3 X 120 SQ.MM. + 1x70 SQ. MM. +1x16 SQ. MM.

AERIAL BUNCHED CABLE 3 X 95 SQ.MM. + 1 x50 SQ. MM.+ 1x16 SQ. MM.

AERIAL BUNCHED CABLE 3 X 70 SQ.MM.+1 x50 SQ. MM.+ 1x16 SQ. MM.

LT Aerial Bunched Cable assesories

Erection of GI earth clamps.

Erection of suspension clamp, Dead end assembly with eye hook , insulated connector and others miscellaneous items required for completion of works

Earthing arrangement as per technical specificatons, approved drawings and scope of work.

Excavation, erection, testing & commissioning of 40 mm dia., 4.5 m long GI pipe earth electrode with GI wire for pole earthing , Charcoal, Salt and other accessories complete

Erection of 8 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc

Erection of 11 KV, 3.1 m long Guard Bracket made of Channel of size 100 x 50 x 6 mm Complete etc

Copper plate earthing of transformer CBS & Battery charger including cost of copper plate size 600 X 600 X 6 mm & copper strip of size 25 X 4 mm i/c salt, charcoal etc. as required.

FOR 100KVA : Supplying, fitting and fixing of chain link fencing of SWG GL wire (50X50X5mm mesh) i/c corner and end post with MS angle of size 50X50X5mm and length not less than 1800mm intermideate post of MS angle of size 40X40X5mm and D length not less than 1800mm i/c supplying, fittings and fixing of hook, eyebolt with nuts, staples bolts etcas required with 3 horizontal line of GL wire 10swg at top middle and bottom and with one vertical line to each fencing tight and erect complete i/c the cost of primer, painting of MS angle iron post in PCC base etc and two cot of Al pain on foundation of cost with PCC works of 1:2:4 CC as per approved drawing.

FOR 100KVA : Fitting and Fixing and Fabrication of standard size MS Gate as per approved drawing

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.

Laying out, tensioning, binding of conductor and tightening of stays and stringing, testing and commissioning of ACSR Conductor of following sizes including installation of Insulators (Pin & Disc), Hardware fitting, Conductor accessories, jointing sleeves, helical formed fittings, jumpering and by providing & erecting PG Clamps etc as required as per approved drawings, scope of work and technical specifications

6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel

Painting and Finishing Work

Painting with 2 coats of red oxide paint & 2 coats of alluminium paints on poles / equipment / metal surfaces on full rate basis.

Jungle clearance thick and thin including cutting, uprooting and removing trees more than 20cm upto 61 cm girth, filling up and levelling the hollows of dugs roots, stacking the useful materials and disposing of rubbish upto a distance 15m outside the periphery of the area cleared (Girth to be measured 1.22m above ground level and at ground level in case of bamboo or cane clumps).

Erection, Testing and Commissioning of pole mounted/floor mounted (100KVA) Distribution Transformer (i/c transfomer foundation materials) with all accessories as per scope of work, approved drawings and specifications:

11/0.4 KV Distribution Transformer 25 KVA 3 phase Aluminium wound DTR

11/0.4 KV Distribution Transformer 63 KVA 3 phase Aluminium wound DTR

11/0.4 KV Distribution Transformer 100 KVA 3 phase Aluminium wound DTR

SAFETY ALERT SYSTEM

Manufacturing, fabrication and supply of danger plate made of mild steel sheet of atleast 1.6 mm thick and vitreous enameled white, with letters, figures and the conventional skull and cross-bones in signal red colour on the front side for -

Danger Plate of size 250 mm x 200 mm of thickness 3 mm.(415V)

Danger Plate of size 250 mm x 200 mm of thickness 3 mm.(11000V)

Anti climbing devices with G. I. thornwire / Barbed wires.

Stringing of AAA Covered Conductor as per approved sagging including installation of 11kv 45KN disc insulators with strain hardware/11KV 45KN pin insulators with GI pin, hardware fittings, conductors accessories, jumpering arrangement etc. This shall also includes errection of PG clamp and connectors, jointing sleeves etc. as required complete in all repsect as per TS.

AAC Conductor 120 Sqmm

M/s D & G Construction

Industrial Systems LLP

T and T Projects Limited