Construction of PSQ Cat E-01 (G+1) unit at PHQ Dahod Dist. Dahod (Including Electrification) [1st Attempt]

NAME OF WORK : Construction of PSQ Cat E-01 (G+1) at PHQ Dahod, Dist:Dahod,(Incl.Ele)

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to tender for

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

1 Excavation for foundation in Loose or Soft soil upto 1.5mt depth including 39.00 Cum. 124.61 Rs. One Hundred

sorting out and stacking of useful materials and disposing of the excavated Fifteen & Paise Ninety

stuff upto Any Lead. Two Only

2 Excavation for foundation in Dense or Hard soil upto 1.5mt depth including 34.00 Cum. 159.30 Rs. One Hundred Forty

sorting out and stacking of useful materials and disposing of the excavated Eight & Paise Ninteen

stuff upto Any Lead. Only

3 Excavation for foundation in Soft Rock upto 1.5 mt. depth including sorting 78.00 Cum. 281.87 Rs. Two Hundred Sixty

out and stacking of useful materials and disposing of the excavated stuff Two & Paise Twenty

upto Any Lead. Only

4 Excavation for foundation in Soft Rock 1.5 mt to 3mt depth including sorting 62.00 Cum. 305.98 Rs. Two Hundred

out and stacking of useful materials and disposing of the excavated stuff Eighty Four & Paise

upto Any Lead. Sixty Three Only

5 Filling avaliable excavated earth ( excluding rock). In trenches, plinth sides 48.00 Cum. 136.11 Rs. One Hundred

of foundations etc. in layers NOt exceeding 20 cms. In depth consolidation Twenty Nine & Paise

each deposited layer by ramming and watering. Ten Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

6 Supplying and Filling in Foundation and Plinth with selected soil or 106.00 Cum. 270.37 Rs. Two Hundred Fifty

murrum in layers of 20cms. thickness including watering, ramming, Seven & Paise Sixteen

consolidating and dressing etc.complete. Only

7 FILLING in plinth with SAND under floors including watering, raming 8.00 Cum. 415.66 Rs. Three Hundred

consolidating and dressing etc. complete. Ninety One & Paise

Sixty Five Only

8 Applying general insecticide pest control treatment to floors, cupboards etc 80.00 Sqm 53.85 Rs. Fifty & Paise Nine

including labour material etc. complete. Using Heptachloride 20 EC. As Per Only

6113_pests Consentration Weight 0.50 percent is recommended one litre

chemical emulsion dillute with 39 liter of water will give. Total dillute

concrentration will be 40 litre inclusive of one litre chemical emulsion

appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S.

9 Providing & laying Cement Concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 7.00 Cum. 2975.72 Rs. Two Thousand

graded M\C stone aggrigates of 40 mm nominal size) curing complete Eight Hundred Eighty

including cost of formwork in FOUNDATION AND PLINTH. Two & Paise Eighty

10 Providing & laying Cement Concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 51.60 Cum. 2653.39 Rs. Two Thousand Five

graded M\C stone aggrigates of 40 mm nominal size) curing complete Hundred Sixty & Paise

including cost of formwork in FOUNDATION AND PLINTH. Forty Seven Only

11 Providing & laying Cement Concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 6.00 Cum. 2492.22 Rs. Two Thousand

graded stone aggrigates of 40 mm nominal size) and curing complete Three Hundred Ninety

excluding cost of formwork in FOUNDATION AND PLINTH. Nine & Paise Thirty

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

12 Providing and laying controlled cement concrete M - 250 and finishing 17.50 Cum. 4582.67 Rs. Four Thousand Four

smooth with curing etc. complete Including the cost of form work of Hundred Thirty Five &

Plywood only with fair finish & Proping must be of steel only so as to give a Paise Eighty Five Only

fair finish but excluding the cost of reinforcement for R.C.C. work in column

FOOTING base of columns and Mass concrete. Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as Per Mix

13 Providing and laying controlled cement concrete M - 250 and finishing 9.00 Cum. 8953.70 Rs. Eight Thousand

smooth with curing etc. complete Including the cost of form work of Five Hundred Thirty

Plywood only with fair finish & Proping must be of steel only so as to give a One & Paise Eighty

fair finish but excluding the cost of reinforcement for R.C.C. work in Eight Only

COLUMN upto PLINTH for any cross sectional area of column. Rate are

also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

14 Providing and laying controlled cement concrete M - 250 and finishing 10.80 Cum. 7230.52 Rs. Six Thousand Nine

smooth with curing etc. complete Including the cost of form work of Hundred Eighteen &

Plywood only with fair finish & Proping must be of steel only so as to give a Paise Fifty One Only

fair finish but excluding the cost of reinforcement for R.C.C. work in

PLINTH BEAMS of any cross sectional area of beam. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

15 Providing and laying controlled cement concrete M - 250 and finishing 5.00 Cum. 6029.91 Rs. Five Thousand

smooth with curing etc. complete Including the cost of form work of Eight One & Paise

Plywood only with fair finish & Proping must be of steel only so as to give a Twenty Nine Only

fair finish but excluding the cost of reinforcement for R.C.C. work in coping

for any cross sectional area. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

16 Providing and laying controlled cement concrete M - 200 and finishing 0.50 Cum. 4273.14 Rs. Three Thousand

smooth with curing etc. complete Including the cost of form work of Eight Hundred Sixty

Plywood only with fair finish & Proping must be of steel only so as to give a Eight & Paise Sixteen

fair finish but excluding the cost of reinforcement for R.C.C. work in Only

foundation and plinth. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

17 Providing and laying controlled cement concrete M - 150 and finishing 8.00 Cum. 3875.02 Rs. Three Thousand

smooth with curing etc. complete excluding the cost of form work and Seven Hundred Forty

reinforcement for R.C.C. work in foundation and plinth. Rate are also Two & Paise Eighty

inclusive of providing and mixing Plasticizer of approved make in Nine Only

proportion as Per Mix Design.

18 Providing and laying controlled cement concrete M - 250 and finishing 8.00 Cum. 10833.80 Rs. Ten Thousand Two

smooth with curing etc. complete Including the cost of form work of Hundred Eighty Nine &

Plywood only with fair finish & Proping must be of steel only so as to give a Paise Three Only

fair finish but excluding the cost of reinforcement for R.C.C. work in

COLUMNS for any cross sectional area at GROUND FLOOR. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

19 Providing and laying controlled cement concrete M - 250 and finishing 6.50 Cum. 10873.48 Rs. Ten Thousand Three

smooth with curing etc. complete Including the cost of form work of Hundred Twenty Seven

Plywood only with fair finish & Proping must be of steel only so as to give a & Paise Thirty One

fair finish but excluding the cost of reinforcement for R.C.C. work in Only

COLUMNS for any cross sectional area at FIRST FLOOR. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

20 Providing and laying controlled cement concrete M - 250 and finishing 1.50 Cum. 10913.16 Rs. Ten Thousand Three

smooth with curing etc. complete Including the cost of form work of Hundred Sixty Five &

Plywood only with fair finish & Proping must be of steel only so as to give a Paise Fifty Nine Only

fair finish but excluding the cost of reinforcement for R.C.C. work in

COLUMNS for any cross sectional area at SECOND FLOOR. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

21 Providing and laying controlled cement concrete M - 250 and finishing 9.00 Cum. 9066.41 Rs. Eight Thousand Six

smooth with curing etc. complete Including the cost of form work of Forty Four & Paise

Plywood only with fair finish & Proping must be of steel only so as to give a Twelve Only

fair finish but excluding the cost of reinforcement for R.C.C. work in Beam

for any cross sectional area at Ground FLOOR. Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as Per Mix

22 Providing and laying controlled cement concrete M - 250 and finishing 8.00 Cum. 9106.09 Rs. Eight Thousand Six

smooth with curing etc. complete Including the cost of form work of Hundred Eighty Two &

Plywood only with fair finish & Proping must be of steel only so as to give a Paise Forty Only

fair finish but excluding the cost of reinforcement for R.C.C. work in Beam

for any cross sectional area at FIRST FLOOR. Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as Per Mix

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

23 Providing and laying controlled cement concrete M - 250 and finishing 2.00 Cum. 9145.77 Rs. Eight Thousand

smooth with curing etc. complete Including the cost of form work of Seven Hundred Twenty

Plywood only with fair finish & Proping must be of steel only so as to give a & Paise Sixty Eight

fair finish but excluding the cost of reinforcement for R.C.C. work in Beam Only

for any cross sectional area at SECOND FLOOR. Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as Per Mix

24 Providing and laying controlled cement concrete M - 250 and finishing 9.50 Cum. 8162.56 Rs. Eight Thousand One

smooth with curing etc. complete Including the cost of form work of Hundred Sixteen &

Plywood only with fair finish & Proping must be of steel only so as to give a Paise Forty Eight Only

fair finish but excluding the cost of reinforcement for R.C.C. work in SLAB

having thickness of 10 cm and upto 13 cm thickness for Ground floor. Rate

are also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

25 Providing and laying controlled cement concrete M - 250 and finishing 10.00 Cum. 8202.24 Rs. Eight Thousand One

smooth with curing etc. complete Including the cost of form work of Hundred Fifty Four &

Plywood only with fair finish & Proping must be of steel only so as to give a Paise Seventy Six Only

fair finish but excluding the cost of reinforcement for R.C.C. work in SLAB

having thickness of 10 cm and upto 13 cm thickness for FIRST floor. Rate

are also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

26 Providing and laying controlled cement concrete M - 250 and finishing 2.00 Cum. 8241.92 Rs. Eight Thousand One

smooth with curing etc. complete Including the cost of form work of Hundred Ninety Three

Plywood only with fair finish & Proping must be of steel only so as to give a & Paise Four Only

fair finish but excluding the cost of reinforcement for R.C.C. work in SLAB

having thickness of 10 cm and upto 13 cm thickness for Second floor. Rate

are also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

27 Providing and laying controlled cement concrete M - 250 and finishing 6.10 Cum. 7735.86 Rs. Seven Thousand Six

smooth with curing etc. complete Including the cost of form work of Hundred Ninety Two &

Plywood only with fair finish & Proping must be of steel only so as to give a Paise Fifty Eight Only

fair finish but excluding the cost of reinforcement for R.C.C. work in SLAB

having thickness of 13 cm and upto 15 cm thickness for GROUND floor.

Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

28 Providing and laying controlled cement concrete M - 250 and finishing 0.50 Cum. 7775.54 Rs. Seven Thousand

smooth with curing etc. complete Including the cost of form work of Seven Hundred Thirty

Plywood only with fair finish & Proping must be of steel only so as to give a & Paise Eighty Six Only

fair finish but excluding the cost of reinforcement for R.C.C. work in SLAB

having thickness of 13 cm and upto 15 cm thickness for First floor. Rate are

also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

29 Providing and laying controlled cement concrete M - 250 and finishing 1.00 Cum. 8770.91 Rs. Eight Thousand

smooth with curing etc. complete Including the cost of form work of Three Hundred Sixty

Plywood only with fair finish & Proping must be of steel only so as to give a Six & Paise Thirty Seven

fair finish but excluding the cost of reinforcement for R.C.C. work in Lintel Only

for any cross sectional area at Ground FLOOR . Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as Per Mix

30 Providing and laying controlled cement concrete M - 250 and finishing 1.00 Cum. 8810.59 Rs. Eight Thousand

smooth with curing etc. complete Including the cost of form work of Four Hundred Four &

Plywood only with fair finish & Proping must be of steel only so as to give a Paise Sixty Five Only

fair finish but excluding the cost of reinforcement for R.C.C. work in Lintel

for any cross sectional area at First FLOOR . Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as Per Mix

31 Providing and laying controlled cement concrete M - 250 and finishing 1.10 Cum. 6029.91 Rs. Five Thousand

smooth with curing etc. complete Including the cost of form work of Eight One & Paise

Plywood only with fair finish & Proping must be of steel only so as to give a Twenty Nine Only

fair finish but excluding the cost of reinforcement for R.C.C. work in Lintel

Bend for any cross sectional area at Ground FLOOR . Rate are also inclusive

of providing and mixing Plasticizer of approved make in proportion as Per

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

32 Providing and laying controlled cement concrete M - 250 and finishing 1.10 Cum. 6069.59 Rs. Five Thousand

smooth with curing etc. complete Including the cost of form work of Eight Thirty Nine &

Plywood only with fair finish & Proping must be of steel only so as to give a Paise Fifty Seven Only

fair finish but excluding the cost of reinforcement for R.C.C. work in Lintel

Bend for any cross sectional area at First FLOOR . Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as Per Mix

33 Providing and laying controlled cement concrete M - 250 and finishing 5.00 Cum. 9817.44 Rs. Nine Thousand

smooth with curing etc. complete Including the cost of form work of Four Hundred Forty

Plywood only with fair finish & Proping must be of steel only so as to give a Four & Paise Seventy

fair finish but excluding the cost of reinforcement for R.C.C. work in Chajjas Two Only

having Any thickness up to floor two level including finishing the exposed

surface with cement mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth

surface for All floor. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

34 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 280.00 Rmt 43.63 Rs. Forty & Paise Fifty

35 Providing and laying controlled cement concrete M - 250 and finishing 2.50 Cum. 8449.98 Rs. Eight Thousand

smooth with curing etc. complete Including the cost of form work of Hundred Thirty & Paise

Plywood only with fair finish & Proping must be of steel only so as to give a Eighty Two Only

fair finish but excluding the cost of reinforcement for R.C.C. work in

Staircase for All FLOOR . Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

36 Providing TMT, Fe-500/500D bar reinforcement of RCC Work including 10810.00 Kgs 76.52 Rs. Seventy Five &

cutting, bending, binding and placing in position etc.complete for all floor.( Paise Forty Six Only

Brand as approved by GSPHC)

37 Extra for additional height of propping and centering where the height of 15.00 Smt 606.14 Rs. Five Hundred Sixty

propping and centering exceeds 4.0 M between supporting floor to ceiling Three & Paise Eighty

including temporary brick or stone pillars for supporting as required. (iii) Five Only

Height more than 6.0 M. and upto 7.0 M.

38 Providing & Laying honey comb brick masonary using common burnt clay 7.00 Cum. 2556.10 Rs. Two Thousand Four

building brick in cement mortar 1:6 (1 cement,6Coarse sand) below ground Hundred Four & Paise

level. Seven Only

39 BRICK WORK using common burnt clay building bricks having crushing 43.00 Cum. 3815.08 Rs. Three Thousand

strength not less than 35 Kg./Sq. cm. In FOUNDATION AND PLINTH in Five Hundred Eighty

cement mortar 1 : 6 ( 1 cement : 6 coarse sand ( Conventional Bricks ). Eight & Paise Seventeen

40 BRICK WORK using common burnt clay building bricks having crushing 27.00 Cum. 4100.65 Rs. Three Thousand

strength not less than 35 Kg./Sq cm. In super structure above plinth level Eight Hundred Fifty

upto floor two level. Conventional bricks in cement moratar 1 : 6 ( 1 cement : Three & Paise Eighty

6 coarse sand) for GROUND FLOOR. Two Only

41 BRICK WORK using common burnt clay building bricks having crushing 29.00 Cum. 4138.78 Rs. Three Thousand

strength not less than 35 Kg./Sq cm. In super structure above plinth level Eight Hundred Eighty

upto floor two level. Conventional bricks in cement moratar 1 : 6 ( 1 cement : Nine & Paise Sixty

6 coarse sand) for 1st FLOOR. Eight Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

42 BRICK WORK using common burnt clay building bricks having crushing 6.00 Cum. 4176.91 Rs. Three Thousand

strength not less than 35 Kg./Sq cm. In super structure above plinth level Nine Hundred Twenty

upto floor two level. Conventional bricks in cement moratar 1 : 6 ( 1 cement : Five & Paise Fifty Four

6 coarse sand) for 2nd FLOOR. Only

43 Half BRICK WORK using common burnt clay building bricks having 2.00 Sqm. 584.17 Rs. Five Hundred Forty

crushing strength not less than 35 Kg./Sq. cm. In FOUNDATION AND Seven & Paise Fifteen

PLINTH in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ( Conventional Only

44 HALF BRICK masonary in common brunt clay building bricks having 19.00 Sqm. 639.34 Rs. Five Hundred

crusing strength not less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : Ninety Eight & Paise

4 coarse sand ) conventional bricks for Ground FLOOR. Forty Seven Only

45 HALF BRICK masonary in common brunt clay building bricks having 6.00 Sqm. 645.18 Rs. Six Hundred Three

crusing strength not less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : & Paise Ninety Four

4 coarse sand ) conventional bricks for 1st FLOOR. Only

46 Providing 10 mm thick Cement PLASTER in Single Coat on Ceilings for 73.00 Sqm 226.90 Rs. Two Hundred

Interior Plastering and Finished Even & Smooth in C.M. 1: 3 ( 1 cement : 3 Eleven & Paise Seven

sand ) Including Finishing with a Floating Coat of Cement and Fine Sand Only

Mortar of Proportion 1:1 (1.5mm thick About) at GROUND FLOOR.

47 Providing 10 mm thick Cement PLASTER in Single Coat on Ceilings for 80.00 Sqm 254.01 Rs. Two Hundred

Interior Plastering and Finished Even & Smooth in C.M. 1: 3 ( 1 cement : 3 Thirty Six & Paise

sand ) Including Finishing with a Floating Coat of Cement and Fine Sand Twenty Nine Only

Mortar of Proportion 1:1 (1.5mm thick About) at FIRST FLOOR.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

48 Providing 10 mm thick Cement PLASTER in Single Coat on Ceilings for 9.00 Sqm 281.12 Rs. Two Hundred Sixty

Interior Plastering and Finished Even & Smooth in C.M. 1: 3 ( 1 cement : 3 One & Paise Fifty One

sand ) Including Finishing with a Floating Coat of Cement and Fine Sand Only

Mortar of Proportion 1:1 (1.5mm thick About) at SECOND FLOOR.

49 Provinding 15 mm thick Cement PLASTER in Single Coat on Brick or 261.00 Sqm 229.09 Rs. Two Hundred

Concrete Wall for Interior Plastering and Finished Even and Smooth in C.M. Thirteen & Paise Eleven

1:4 ( 1 cement : 4 sand ) Including Finishing with a Floating Coat of Cement Only

and Fine Sand Mortar of Proportion 1:1 (1.5mm thick About) at GROUND

50 Provinding 15 mm thick Cement PLASTER in Single Coat on Brick or 230.00 Sqm 258.23 Rs. Two Hundred Forty

Concrete Wall for Interior Plastering and Finished Even and Smooth in C.M. & Paise Twenty Two

1:4 ( 1 cement : 4 sand ) Including Finishing with a Floating Coat of Cement Only

and Fine Sand Mortar of Proportion 1:1 (1.5mm thick About) at FIRST

51 Provinding 15 mm thick Cement PLASTER in Single Coat on Brick or 33.00 Sqm 287.37 Rs. Two Hundred Sixty

Concrete Wall for Interior Plastering and Finished Even and Smooth in C.M. Seven & Paise Thirty

1:4 ( 1 cement : 4 sand ) Including Finishing with a Floating Coat of Cement Three Only

and Fine Sand Mortar of Proportion 1:1 (1.5mm thick About) at SECOND

52 Provinding 20 mm thick SAND FACED cement PLASTER on walls above 391.00 Sqm 350.48 Rs. Three Hundred

ground level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 Twenty Six & Paise

sand ) and 8mm thock finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Three Only

Complete for any height.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

53 Provinding 10 mm thick cement PLASTER in single coat of interior 20.00 Sqm 237.45 Rs. Two Hundred

plastering and finished even and smooth in cement mortar 1:3 ( 1 cement : 3 Twenty One & Paise

sand ) and finishing with floating coat of neat cement slurry including Forty Three Only

providing and mixing with WATER PROFFING material For ALL

54 Providing & laying acrylic base ( zycosil or equivalent ) Water proofing 12.00 Sqm 110.70 Rs. One Hundred Ten &

paint treatment in two coats to vertical and horizontal surface of depressed Paise Seventy Only

prortion of Bath / WC as directed by Engineer in charge.This treatment shall

be carried out over and above water proofing cement plaster.

55 Provinding CEMENT VATA (10cm x 10cm) size quarter round in cement 105.00 Rmt 24.04 Rs. Twenty Three &

mortar (1 : 1) including neat cement finishing, watering etc. Complete. Paise Forty Five Only

56 Providing & laying ordinary CEMENT CONCRETE 1:2:4 ( 1 cement : 2 7.00 Sqm 352.17 Rs. Three Hundred

coarse sand : 4 graded machine broken stone aggregate 10 mm nominal size Twenty Seven & Paise

) for flooring Laid in one layer finished with floating coat of neat cement (A) Sixty Only

50 mm Thick for All floors

57 Finishing wall with weather proof exterior emulsion paint on wall surface 453.00 Sqm 155.21 Rs. One Hundred Forty

(two coats) over and above applying One Coat Of Primer to give an Seven & Paise Sixty

required shape even shade after thoroughly brushing the surface to remove Eight Only

all dirt, and remains of loose powdered materials.etc complete.

primer,Exterior Emulsion Paint Shall be used as per approved material list

by GSPHCL. (For any Height)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

58 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on 161.00 Sqm 192.51 Rs. One Hundred

Ceilling/Slop Surface (two coats) to give an required shap even shade after Eighty Six & Paise

throughly brushing the surface to remove all dirt and remains of loose Twenty Six Only

poweder material etc. complete. Rate are inclusive of applying two coat of

lapy (Putty) and one coat of primer on new Ceilling/Slop Surface to give

and even shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth. Fine Putty,

primer, plastic Emulsion Paint Shall be used as per approved material list by

GSPHCL. (For All Floor)

59 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to 493.00 Sqm 181.87 Rs. One Hundred

give an required shap even shade after throughly brushing the surface to Seventy Six & Paise One

remove all dirt and remains of loose poweder material etc. complete. Rate Only

are inclusive of applying two coat of lapy (Putty) and one coat of primer on

new wall surface to give and even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth. Fine Putty, primer, plastic Emulsion Paint Shall be used as

per approved material list by GSPHCL. (For All Floor)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

60 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with 1mm 19.00 Sqm 8408.29 Rs. Eight Thousand

Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Pine Three Hundred Ninety

or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on

Nine & Paise Seventy

Both Side with Lock rail on Center. Flush Door Provide with Teak wood beading patti

(32mm X 12mm) on Peripheries of Flush Door with Door Frame of Non Teak Solid Wood of Four Only

size 100mm x 60mm with Chemically Treated and Seasoned Including Paint Matching with

Laminates. Frame & Flush door shutter having 5 year warranty against attack of biological

agent like termite, borers, decay, fungi and harmful insects also warranty against seasoning

related issues like crack, bending, twisting, warping. Laminates on shutter shall be press by

cold press method. Shutter shall be brought to site in packed PVC bags & pvc coating shall

be removed on completion of work in such a way that shutter & Frame is free from nail

mark & any damages etc. Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No

of Hold Fast (25mm X 5mm) & 4 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick,

required Screw & Nails per Frame and Fixing following S.S. Fixtures And Fastening. (1)

Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double

Leg Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick. Door

are Fixing as per Details Drawing & Instruction of Engineer in charge. All Materials Used

Shall be as Per approved Material Make List of G.S.P.H.C. The Required Frame is to be

Obtained from Vanil Udhyog Maked Only.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

61 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush Door Shutter with 3.00 Sqm 11089.44 Rs. Sixty Four & Paise

1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Six Only

Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face

Veneer on Both Side with Lock rail on Center. Flush Door Provide with Teak wood beading

patti (32mm X 12mm) on Peripheries of Flush Door with Door Frame of Non Teak Solid

Wood of size 150mm x 70mm with Chemically Treated and Seasoned Including Paint

Matching with Laminates. Frame & Flush door shutter having 5 year warranty against attack

of biological agent like termite, borers, decay, fungi and harmful insects also warranty

against seasoning related issues like crack, bending, twisting, warping. Laminates on shutter

shall be press by cold press method. Shutter shall be brought to site in packed PVC bags &

pvc coating shall be removed on completion of work in such a way that shutter & Frame is

free from nail mark & any damages etc. Rates are also Inclusive of all Labors & Proviging

15cm. Long 8 No of Hold Fast (25mm X 5mm) & 8 No of 6 Inch S.S. but Hinges, 100mm x

mm x 3mm thick, required Screw & Nails per Frame and Fixing following S.S. Fixtures And

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm Long, (3) Double Leg

Heavy Push Door Stopper 2 No & (4) Handle 4 No, 150mm Long X 10mm thick. Door are

Fixing as per Details Drawing & Instruction of Engineer in charge. All Materials Used Shall

be as Per approved Material Make List of G.S.P.H.C. The Required Frame is to be Obtained

from Vanil Udhyog Maked Only.

62 Providing and Fixing Door Eye Glass Ultra Clear 180 degree finish with 1.00 Nos. 248.31 Rs. Two Hundred Forty

brass as per detail drawing and as directed by Engineer In Charge. Rate are Eight & Paise Thirty

inclusive of all material, labour, texes. One Only

63 Providing & Fixing Teak Wood Door Frame Patti 40mm x 10 mm thick as 44.00 Rmt 71.01 Rs. Four Hundred

per detail drawing and as directed by Engineer In charge.Rate are inclusive Twenty One & Paise

of all material , Labour, Taxes. Fifty Eight Only

64 Providing & Fixing WPC Door Patti 26 mm x 6 mm thick as per detail 4.00 Rmt 57.02 Rs. Fifty Seven & Paise

drawing and as directed by Engineer In charge. Rate are inclusive of all Two Only

material , Labour, Taxes.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

65 Providing and fixing 24 mm thick THREE LAYER RIGID PVC PLAIN 6.00 Sqm 4476.00 Rs. Four Thousand Four

DOOR shutter with Frame made from co-extruded three- layer rigid PVC Hundred Seventy Six

foam sheet (single Extruded) with density not less than 600 kg/cbm outer Only

layer 1 mm thick should be of rigid PVC with density of not less than

kg/cbm manufactured by an ISO 9001-2015 certified company. Complete as

per direction of Engineer-in-charge, manufacturer’s specification & drawing.

66 Providing and fixing standared extruded of alluminium section of size 63.50 2.00 Sqm 1509.90 Rs. One Thousand Five

x 38.10 x 1.95 mm,@ Wt 1.094Kg/Rmt with colour anodized alluminium Hundred Nine & Paise

frame with 5mm thick transparent bronze colour tinted float glass as details Ninety Only

etc complete for Fix window.

67 Providing and fixing standard extruded of alluminium section of size 63 * 2.00 Sqm 1163.92 Rs. One Thousand One

38.10 * 1.2 mm ( Jindal section NO:2434,@Wt 0.643 Kg/RMT )with colour Hundred Sixty Three &

anodized alluminium frame for ventilation with 5 mm thick frosted glass as Paise Ninety Two Only

details etc complete for ventilation.

68 Providing and fixing Alluminium section window having extruded 33.00 Sqm 1902.50 Rs. One Thousand Nine

Aluminum Colour anodized section frame main outer size 95mm x 24mm x Hundred Two & Paise

1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three Fifty Only

track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@

Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of

Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of

Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details including one

mosquitoe jali shutter With Both Side Locking Arrangment.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

69 Pro. & Fixing colour Anodised Alluminium fixed louvers made of 1"*4" 9.00 Sqm 2080.00 Rs. Two Thousand

ALLUMINIUM SECTION of 2mm thick (jindal/Banco make)fixed at 0.14mt Eighty Only

c/c with alluminium cleats to m.s. angular frame of 355mm*35mm duly

anodised and fixed with rcc/brick wall with fastners as per arch.

drawings.all the screws and other visible fixtures are also to be anodised as

per specification.

70 Providing and Fixing Granite Telephonic Black Colour 18 mm thick for 57.00 Sqm 2427.83 Rs. Two Thousand Four

jambs and sills of doors & windows using neat cement slurry laid over 20 Hundred Twenty Eight

mm average base of cement mortar 1:1(1 cement:1 Coarse Sand) and jointed & Paise Only

with grey cement slurry including racking(Tancha Work) rubbing and

polishing,scaffoldings,tools and tackles,scaffolding etc. complete(with base

of neat cement) as per direction of Engineer in charge including full

rounding the exposed edges as directed.

71 Providing and laying 25mm thick Double Pre Polished (Dimond Polished) 6.00 Sqm 1108.30 Rs. One Thousand

Kota Stone Flooring over average 20mm thick base of cement mortar 1:6 (1 Hundred Sixty Six &

Cement : 6 Coarse sand) and jointed with gray cement slurry including Paise Ten Only

rubbing and polishing etc. complete. All kotah stone edges shall be hand cut,

Machine cut shall not be allowed.

72 MOULDING OF KOTA STONE/GRANITE STAIR TRADE COMPLETE AS 35.00 Rmt 129.95 Rs. One Hundred

PER DIRECTION OF ENGINEER IN CHARGE. Twenty Nine & Paise

Ninety Five Only

73 PRO. 3 NOS GROOVE IN TOTAL LENGTH OF STAIRCASE TREAD OF 35.00 Rmt 82.80 Rs. Eighty Two & Paise

SIZE 10MM*10MM FINISHED SMOOTH IN PARALLEL LINE , EQUALLY Eighty Only

SPACED AS PER DIRECTION OF ENGINEER IN-CHARGE IN ALL TYPE

OF FLOORING , ETC. COMPLETE.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

74 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile 125.00 Sqm 1682.60 Rs. One Thousand Five

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse Hundred Eighty Three

sand) on new surface or fixing on existing flooring by adhesive including & Paise Fifty Only

dismentaling of existing flooring and material jointed with color cement

slurry including finished with flush pointing & cleaning the surface etc.

complete. Size & Shade of tiles shall be as per Approved Architecture

drawing & as per direction of Engineer in charge.

75 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile 11.00 Sqm 1445.20 Rs. One Thousand

for skirting,risers of steps and dedo over10 mm (average) base of cement Three Hundred Ninety

mortar 1:3 ( 1 cement: 3 coarse sand) on new surface orfixing on existing Two & Paise Twenty

flooring by adhesive including dismentaling of existing flooring and Only

material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete. Size & Shade of tiles shall be

as per Approved Architecture drawing & as per direction of Engineer in

76 Providing & Laying 24" x 24" Antiskid Vitrified 8 mm thick tile flooring 14.00 Sqm 1458.33 Rs. One Thousand

over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) Three Hundred Eighty

on new surface or fixing on existing flooring by adhesive including Three & Paise Ninety

dismentaling of existing flooring and material jointed with color cement Nine Only

slurry including finished with flush pointing & cleaning the surface etc.

complete. Size & Shade of tiles shall be as per Approved Architecture

drawing & as per direction of Engineer in charge.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

77 Provinding & laying Printed / Coloured Glazed 8mm thick TILES in 56.00 Sqm 1508.58 Rs. One Thousand Four

skirting, risers of steps and DADO on 10mm thick cement plaster 1: 3 ( 1 Hundred Three & Paise

cement : 3 coarse sand ) & jointed with white cement slurry. ( Size of Tiles Thirty Three Only

shall be 600 mm x 300mm ). Size & Shade of tiles shall be as per Approved

Architecture drawing & as per direction of Engineer in charge.

78 Providing and fixing both side polished machine cut KOTA STONE shelve/ 15.00 Sqm 589.50 Rs. Five Hundred

partition 20mm to 25mm thick embaded in to wall at support including Eighty Nine & Paise

racking and finishing smooth the surface including cutting the stone as and Fifty Only

where required etc. complete including rounding of exposed edges etc.

79 Providing and Fixing of stainless steel 304 grade pipe (hand rail) railing. 2.00 Rmt 911.03 Rs. Nine Hundred

top pipe of 2" dia , vertical support 1.0 " x1.0" at every max. 0.9 mt c/c, fixed Eleven & Paise Three

with stone/concrete or brickwork &finishing the said as directed by Only

engineer in charge. Rate are inclusive of all material,labour,taxes&polishing.

80 Providing & fixing Concealed Center Point to wall celing & floor CPVC 44.00 Rmt 443.29 Rs. Four Hundred

(SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For Thirty Seven & Paise

Portable Water of 40 mm. dia. nominal bor tube fitting and clamps Sixty Six Only

including making good the wall, ceiling and floor etc. Complete.

81 Providing & fixing Concealed Center Point to wall celing & floor CPVC 14.00 Rmt 251.31 Rs. Two Hundred Forty

(SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For Seven & Paise Twenty

Portable Water of 25 mm. dia. nominal bor tube fitting and clamps Five Only

including making good the wall, ceiling and floor etc. Complete.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

82 Providing & fixing Concealed Center Point to wall celing & floor CPVC 33.00 Rmt 206.73 Rs. Two Hundred Two

(SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For & Paise Ninety Seven

Portable Water of 20 mm. dia. nominal bor tube fitting and clamps Only

including making good the wall, ceiling and floor etc. Complete

83 Provinding and fixing gun metal check or non return full way WHEEL / 3.00 Nos. 416.47 Rs. Four Hundred

HANDLE VALVE 25 mm dia.(Zoloto make only). Sixteen & Paise Forty

84 Provinding and fixing gun metal check or non return full way WHEEL / 4.00 Nos. 656.86 Rs. Six Hundred Fifty

HANDLE VALVE 40 mm dia.(Zoloto make only). Six & Paise Eighty Six

85 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive 3.00 Nos. 1309.39 Rs. One Thousand

of all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Three Hundred Nine &

Drawings, Specifications and as per the Instruction of Engineer In charge. Paise Thirty Nine Only

Materials used for the above items Must be list approved by

G.S.P.H.C.L.15mm Dia.

86 Providing & Fixing Angle Cock with Wall Flange. Rate are inclusive of all 3.00 Nos. 665.51 Rs. Six Hundred Sixty

matreials, Labour & Necessary Fittings etc. Complet as per Detailed Five & Paise Fifty One

Drawings, Specifications and as per the Instruction of Engineer In charge. Only

The model & make of Angle cock shall be as per approved make list of

87 Providing & Fixing Wall Mounted Sink Cock with Extended Swivel Sout & 1.00 Nos. 1330.32 Rs. One Thousand

Wall Flange. Rate are inclusive of all matreials, Labour & Necessary Fittings Three Hundred Thirty

etc. Complet as per Detailed Drawings, Specifications and as per the & Paise Thirty Two

Instruction of Engineer In charge. The model & make of Angle cock shall be Only

as per approved make list of G.S.P.H.C.L.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

88 Providing & Fixing 15mm Concealed Heavy Duty Stop Cock with Exposed 3.00 Nos. 942.54 Rs. Nine Hundred Forty

Part & Other Accessories (Sleeve, Lever, Wall Flange) . Rate are inclusive of Two & Paise Fifty Four

all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Only

Drawings, Specifications and as per the Instruction of Engineer In charge.

Materials used for the above items Must be list approved by G.S.P.H.C.L.

89 Providing & fixing in position ISI marked Rotational moulded Polyethylene 3000.00 Ltr. 3.91 Rs. Three & Paise

double layer cylindrical vertical storage Tank (IS : 12701) water tank size Ninety One Only

inlcuding making inlet and outlet. Over flow and washout arrangement with

G.I. connection inlcuding using necessary M.H. for connection etc. complete

with closed cover including applying two coats of oil painting outside the

tank etc.complete.

90 P & F to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 37.00 Rmt 302.54 Rs. Three Hundred Two

90mm Dia Complete with Special flings, Compressor type Fittings, with & Paise Fifty Four Only

washer for vertical drain etc. including making good the ceiling and floor on

terrace rain water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical

pipe and 90mm bend at the end near by Ground level rate are Inclusive of all

Necessary Fittings required.

91 Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste pipe 20.00 Rmt 245.74 Rs. Two Hundred Forty

with 'O' ring 75mm dia of ISI 13592/92. Rate inclusive of all fittings like Five & Paise Seventy

single or double "Y" with door, reducer, coupler single T with door bend, Four Only

with washer for vertical drain etc.complete and making good the wall,ceiling

and floor.ISI make only joints shall be sealed by pipe sealant.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

92 Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste pipe 25.00 Rmt 471.36 Rs. Four Hundred

with 'O' ring 110mm dia of ISI 13592/92. Rate inclusive of all fittings like Seventy One & Paise

single or double "Y" with door, reducer, coupler single T with door bend, Thirty Six Only

with washer for vertical drain etc. complete and making good the

wall,ceiling and floor.ISI make only joints shall be sealed by pipe sealant.

93 Providing and laying G.I.RAIN WATER SPOUT of 50 mm dia and 0.30 m 2.00 Nos. 100.90 Rs. One Hundred &

length. Paise Ninety Only

94 Providing & Fixing SWR/UPVC Multi Nahni Trap(IS14735) of following 4.00 Nos. 508.29 Rs. Five Hundred Eight

Nominal Dia. Self Cleaning design with top tiles and making good the walls & Paise Twenty Nine

and floors 100mm inlet and 50mm outlet including 150 X 150 mm stainless Only

steel with grating.

95 Provinding and fixing in position SWR/UPVC COWEL VENT to pipe 75 3.00 Nos. 16.47 Rs. Sixteen & Paise

mm dia directed. Forty Seven Only

96 Provinding and fixing in position SWR/UPVC COWEL VENT to pipe 110 3.00 Nos. 28.16 Rs. Twenty Eight &

mm dia directed. Paise Sixteen Only

97 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & 3.00 Nos. 5470.90 Rs. Five Thousand Four

intergal "P" or "S" Trap including Jointing the Trap with Pan and Soil pipe. Hundred Seventy &

Wall hung shall be fixed on S.S heavy duty rack bolt having 16mm dia, Paise Ninety Only

165mm length using Plastic sleeve Make by Using Drill Bitt Only. Rate are

inclusive of all matreials, Labour & Necessary Fittings etc. Complet as per

Detailed Drawings, Specifications and as per the Instruction of Engineer In

charge. Materials used for the above items Must be list approved by

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

98 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all 3.00 Nos. 565.51 Rs. Five Hundred Sixty

matreials, Labour & Necessary Fittings etc. Complet as per Detailed Five & Paise Fifty One

Drawings, Specifications and as per the Instruction of Engineer In charge. Only

Materials used for the above items Must be list approved by G.S.P.H.C.L.

99 Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. 3.00 Nos. 5921.75 Rs. Five Thousand

I . fisher union, P.V.C water pipe with Connection from Stop Cock to Pillar Seven Hundred Twenty

Tap, 32mm dia. C.P. brassa waste coupling with Connection 32mm dia One & Paise Seventy

waste Pipe up to N.T etc. Complete. Rate are inclusive of all matreials, Five Only

Labour & Necessary Fittings etc. Complet as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In charge. Materials

used for the above items Must be list approved by G.S.P.H.C.L. Rate also

inclusive of pvc bottle trap of Approved make by GSPHCL.

100 Provinding and fixing 600mm x 450mm bevelled edge MIRROR of superior 3.00 Nos. 850.90 Rs. Eight Hundred

glass mounted on 6mm thick A.C. sheet or plywood sheet fixed to wooden Twenty Five & Paise

plugs with C.P. brass screws & washers. Forty Eight Only

101 Providing & Fixing Towel Rack. Rate are inclusive of all matreials, Labour & 3.00 Nos. 1078.70 Rs. Three Thousand

Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and Three Forty Three &

as per the Instruction of Engineer In charge. Materials used for the above Paise Sixty Three Only

items Must be list approved by G.S.P.H.C.L.

102 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & 3.00 Nos. 909.08 Rs. Nine Hundred Nine

Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and & Paise Eight Only

as per the Instruction of Engineer In charge. Materials used for the above

items Must be list approved by G.S.P.H.C.L.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

103 Providing a I.S.I. mark 7 levers three key brass pad lock of NAVATAL 2.00 Nos. 243.64 Rs. Two Hundred Forty

(Godrej) make 65mm dia on completion of project. Three & Paise Sixty

104 Provinding and laying inegrated cement based proofing treatment of 79.00 Sqm 920.61 Rs. Eight Hundred

required thickness over the roof including 10mm thick waterproofing Ninety Seven & Paise

cement plaster in cement plaster in cement mortar1:3 and chaina mosaic Fifty One Only

fitting and finally finishing the surfase with white cement slurry and

slopping out taerrace slabs with following specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing treatment near

rainwater outlet or the lowest point of the finishedslope shall not be less

then 45mm, including treating the vertical surfaseof the parapet wall up to

20cms . height above finished level of terracing including finishing the top

with joint less water proofing plaster , curing , testing etc. complete. Rate is

including ten years performance of guarantee bond to be given on stamp

paper. (No extra shall be paid for increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cemnt using 2.75 kg/sqm. of

cement admixed with properly water proofing compound conforming to IS -

2645 and 10 mm thick water proofing cement plaster in Cement mortar 1:3

over the R.C.C.slab incl. cleaning the surface before treatment.

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size

with 50% of cement mortar 1:4 (1cement :4 coarse sand ) over 10mm thick

water proofing cement plaster in cement mortar 1:3 (1 cement ,3 coarse sand)

admixed with proprietary water proofing compound conforming to IS

to required slope and treating similarly the adjoining walls up to 200mm

height incl. rouding of junction of walls.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

(C) After Two Days of proper curing applying a second floor of cement

(D) Finishing the surface with china mosaic pieces laid on 10mm thick joint

less cement plaster of mix 1:3(1 cement :3 coarse sand )admixed with

proprietary water proofing compound conforming to IS :2645 and finally

finishing the surface with trowel with neat cement slurry.

(E) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curring for final taste .

All above operation to be done in order and as directed and specified by the

Engineer In Charge.

105 Constructing brick masonry chamber for under ground C.I. inspection 10.00 Nos. 3793.18 Rs. Three Thousand

chamber and bends with brick having crushing strength not less than 35 Seven Hundred Ninety

kg./cm2 in C.M. 1.5 precast R.C.C. cover 1:1.5:3 of size 455 x 610 mm Three & Paise Eighteen

internal dimenslons. R.C.C. top slab with C.C. 1:1.5:3 mix (1 Cement : 1.5 Only

coarse sand :3 graded stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth with a

floating coat of neat cment walls & bed connect etc. complete rate inclusive

of outside plaster of 15mm thick in cm 1:3 form top of chamber and all side

up to 15 cm deep below ground level. rate also inclusive of providing and

fixing precast cover of size .455m x 0.61 x .07 m with 2 no of m.s. flat handle

in cement concrete 1:1.5:3. including angle frame of section 40x40x5mm

section etc complete.(i) Inside Diamensions 455mm x 610mm and 450mm

deep for single/ Multiple pipe line.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

106 Extra over above Item for additional depth 0.1 mt. or part thereof beyond 10.00 Nos. 239.99 Rs. Two Hundred

450mm depth for brick masonary chamber for 455mm x610mm size. Thirty Nine & Paise

Ninety Nine Only

107 Provinding and fixing SW gully trap with out CI grating brick masonary 3.00 Nos. 1176.94 Rs. One Thousand One

chamber and with water tight Pre cast RCC cover with frame of 300*300mm Hundred Seventy Six &

size inside with standard weight (I) Square mouth traps ©150*100mm Paise Ninety Four Only

size P or R type.

108 Providing, Fabricating and fixing M.S. GRILL/GATE of approved pattern 3240.00 Kgs 75.41 Rs. Seventy Two &

fabricated from M.S. flat, square bars, round bars, c-channel, Square/round Paise Eighty Two Only

box pipe as per detail Drawings. Rate is inclusive of welding with grinding

smooth wirh two coats of Oil paint and one coat of yellow Zinc chromate

primer coat of approved brand only. Oil paint shall be used as per approved

material list of GSPHCL. Steel must be of ISI mark only.

109 Providing and fixing MS Letter Box of size of 330x280x75 mm made from 24 1.00 Nos. 612.95 Rs. Six Hundred Twelve

guage MS sheet with high quality textured Red & Ivory painted as per & Paise Ninety Five

instruction of engineer in charges. Only

110 Providing & Fixing 3mm thick acrylic sheet with vinyl letter colour-2073- 0.50 Sqm 7193.88 Rs. Thousand Two

dark grey for back ground and colour -2190-white letter with required Hundred & Paise Only

screws etc as per required sizes complete etc as per specification &

instruction of engineer in charge..

111 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are 8.00 Nos. 990.61 Rs. Nine Hundred

inclusive of all matreials, Labour & Necessary Fittings etc. Complet as per Ninety & Paise Sixty

Detailed Drawings, Specifications and as per the Instruction of Engineer In One Only

charge. Materials used for the above items Must be list approved by

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

112 Providing and fixing of stainless steel 304 grade pipe railing 0.90m height. 15.00 Rmt 3143.43 Rs. Three Thousand

Top round pipe of 50mm dia. Vertical balustrade 50mm dia with 75mun dia One Hundred Forty

5.5 Katori Bottom and 25mm dia S.S Katori Top at every max. 0.90m cle and Three & Paise Forty

intermediate 3 No runners pipe with anchor fastener as per detailed Three Only

drawing & as directed by engineer in charge Rate are inclusive of all

material, labour, taxes & polishing.

113 Providing, fabricating, erecting and fixing of Cast iron railing of approved 2170.00 Kg 126.96 Rs. One Hundred

pattern fabricated from cast iron flate, angles, tees, square bars round bars, Twenty Six & Paise

box as details drawings. Rate is including welding. Rate is also including Ninety Six Only

two coat of oil paint, and one coat of yellow zinc primer coat of approved

114 Providing & Fixing Shower with Arm. Rate are inclusive of all matreials, 3.00 Nos. 931.79 Rs. Nine Hundred

Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Thirty One & Paise

Specifications and as per the Instruction of Engineer In charge. Materials Seventy Nine Only

used for the above items Must be list approved by G.S.P.H.C.L.

115 Providing and Fixing S.S. Cloth Hanger (5 Hook) as per detail drawing and 6.00 Nos. 249.85 Rs. Two Hundred Forty

as directed by Engineer In Charge. Rate are inclusive of all material, labour, Nine & Paise Eighty

texes. Samrat Brand as Approved. Five Only

116 Providing & Fixing 25mm Concealed Heavy Duty Stop Cock with Exposed 3.00 Nos. 1233.57 Rs. One Thousand Two

Pan & Other Accessories (Sleeve, Lever, Wall Flange) Rate are inclusive of all Hundred Thirty Three

materials, Labour & Necessary Fittings etc. Complete as per Detailed & Paise Fifty Seven

Drawings, Specifications and as per the Instruction of Engineer In charge. Only

The Model & Make of Concealed Heavy Stop Cock Shall be as per the

Approved Make List of GSPHCL

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

117 Providing and laying Plantations including providing and fixing tree 28.00 Nos. 600.00 Rs. Six Hundred Only

guard.. Rates are also inclusive of maintaining the plants in live condition at

the time of the execution of the building. i.e. Initial starting time. [The tree

shall be planted].

118 Providing & laying lawn (Green grass ) for land Scapping including 80.00 Sqm 300.00 Rs. Two Hundred Fifty

watering & all labours. Only

119 Providing and fixing Pre-Cast Rubber Dye/steel Dye inter locking concrete 325.00 Sqm 695.07 Rs. Six Hundred

block 60mm thick with grade of concrete M300 pnumatic Seventy Five & Paise

compressed/vibrated mechanically and as per approved design confirming One Only

to IS 15658:2006 including 35mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc

120 Providing and fixing Pre-Cast Concrete Kerb stone of gray cement based 104.00 Rmt 371.21 Rs. Three Hundred

concrete block 30cm length,30cm height and 15cm thick of M250 grade Fifty Eight & Paise Six

concret as per approved design and including excavation for fixing in proper Only

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

121 Providing Corrugated JSW Pre coated sheet roofing fixed with Galvanised 72.00 Sqm 1022.75 Rs. One Thousand

iron J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. Fifteen & Paise Seventy

Limpet washer or G.I. Limpet washer with white lead complete. Excluding Six Only

the cost of Purlins, Rafters, and Trusses. (0.60mm thick).

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

122 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class 69.00 Rmt 396.00 Rs. Three Hundred

SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline Ninety Six Only

coupler and elastomeric sealing ring) with non-smooth External Annular

Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage application as per EN:13476-3 including

all local and central taxes, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the departmental stores etc.

complete. (150mm ID Dia) Including Lowering, laying and jointing of class

SN 8 structured wall ( External Annular Corrugated & Smooth Internal

surface) Polyethylene Piping and fittings with the help of coupler ( on line /

off line ) attached with one end of pipes, sliding over the elastomeric sealing

rubber ring placed on the specified valley of the corrugation at the spigot

end, lowering the same into the trench, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of

specified pipe segments etc. complete as per drawing,specifications &

detailed engineering, including carriage of pipes & fittings from site stacks

to the place of laying etc. as per direction of Engineer-in-charge.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

123 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 61.00 Rmt 229.00 Rs. Two Hundred

Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and Twenty Nine Only

elastomeric sealing ring) with non-smooth External Annular Corrugated and

Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage &

Drainage application as per EN:13476-3 including all local and central taxes,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores etc. complete. (100mm ID Dia) Including

Lowering, laying and jointing of class SN 8 structured wall ( External Annular

Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the

help of coupler ( on line / off line ) attached with one end of pipes, sliding over the

elastomeric sealing rubber ring placed on the specified valley of the corrugation at

the spigot end, lowering the same into the trench, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified

pipe segments etc. complete as per drawing,specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as

per direction of Engineer-in-charge.

124 Provinding and fixing Precast R.C.C cover including angle freme of 40mmx 3.00 Nos. 1932.00 Rs. One Thousand Nine

40mmx3mm section and C.C 1:1.5:3 precast R.C.C cover for I.C and M.H Hundred Thirty Two

chamber etc. including 8mm HYSD steel at 15mm c/c both way and oil Only

painting of angle frame and finishing of concrete with CM 1:3 etc. complete

finished dimension of concrete cover shall be 0.60 x 0.60 x 0.07 mt size. Rates

are inclusive of cost of angle frame, reinforcement, concrete, finishing work

and two pieces of MS flat 25 x 3 mm size as a angle.

125 Providing and Filling Brick Bats in soak well as per drawing and 7.00 Cum. 469.90 Rs. Four Hundred Fifty

specification etc complete. Five & Paise Twenty

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

126 suppllying and filling cinder in sunk portion for all lead and lift tec 5.00 Cum. 791.68 Rs. Seven Hundred

complete. Ninety One & Paise

Sixty Eight Only

127 Providing and fixing tiles roofing with manglore tiles (Mintaylor Roofing 31.00 Sqm 1071.14 Rs. One Thousand

Tiles) of 0.250m X 0.200m over 100mm thick Mortar 1:3 (1- cement & 3- Ninety Six & Paise

coarse Sand ) as instructed by Engineer in Charge. Thirty Eight Only

128 Box cutting the road surface to proper slope and camber for making a base 13.00 Cum. 110.91 Rs. One Hundred Three

for road work including removing the excavated stuff and disposing on the & Paise Seventeen Only

road side slope as directed up to 50 m lead.

129 Construction of Granular Sub base by Providing Couarse graded material 6.00 Cum. 1095.21 Rs. One Thousand

Spreading in uniform Layers With motor grader on prepared surface mixing Ninety & Paise Thirty

by mix in place method with rotavator at OMC and Compacting with Six Only

Vibratory roller to achieve the desired density complete as per table 400-2.

130 Supplying of graded stone aggregate of following sizes (for W.B.M. Road) 5.00 Cum. 894.83 Rs. Eight Hundred Two

(3) Crushed Stone aggregate for Hard Quality up to 63mm size. & Paise Twenty Three

131 Spreading the stone aggregate for soling and W.B.M incl. filling the interstics 5.00 Cum. 265.83 Rs. Two Hundred Forty

forming the surface to required camber and gradient (ii)40 mm to 63 mm Seven & Paise Twenty

.Size aggregate M/c. Eight Only

132 Supplying of murum on W.B.M surface etc. complete. 70.00 Cum. 278.73 Rs. Two Hundred

Seventy & Paise Fifty

133 Spreding blidage or road crust filling the gaps in metal and leveling to 70.00 Cum. 156.96 Rs. One Hundred Forty

cambert and gradient as directed .(i)Murrum. Six & Paise One Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

134 Rolling & consolidation water bound macadam (except laterite and kankar) 224.00 Sqm 34.05 Rs. Thirty One & Paise

including watering not exceeding 150mm thk. (Main layer incl. binding Sixty Seven Only

materials) includining filling in depression which occurs during the process.

(B)with Power roller exceeding 8 tonne and not exceeding 12 tonne.

135 Construction Of Concrete Road Using Trimix System Having of any 11.00 Cum. 4504.29 Rs. Four Thousand

Thickness M-300 Concrete Mix With Providing And Fixing & Removing Of Three Hundred Eighty

"C" Channel Having Size 75Mm. X75Mm As Per Required Level Slope And Five & Paise Eighty

Thickness Of Concrete Road Floor Levelling Of Place Concrete With Surface Three Only

Vibrator Machine,Dewatering System Device Finishing With Power Floater

Machine And Trowel Light Brooming On The Surface As Directed With

Providing Expansion Joint Size 20 X 190Mm. Using Of Concrete Cutter

Machine Including Curing Etc. Complete.

136 Providing and lixing CAPCELL HD 100 pre- moulded compressible filler 3.00 Sqm 795.27 Rs. Seven Hundred

board in black colour confirming to MORT&H Specifications (Clause 1015). Eighty Eight & Paise

having minimum density 95kg/cum.metre, non-staining with less than 1% Seventy Eight Only

water absorption & compression recovery of 93% minimum as per

specification for 20 mm wide expansion joint including cutting to required

size and shape at all levels etc. complete as directed.

137 Providing and fixing 25 mm diameter backup rod having minimum density 8.00 Rmt 17.62 Rs. Seventeen & Paise

22 kg per cum (ASTMD - 3575) & compression strength of 0.40 kg per sqm Forty Eight Only

(ASTM 5249) and finishing with polysulphide sealant etc. complete. For

mm wide expansion joint.

138 Providing Groove cutting in C.C. Road incluing cleaning etc.complete as per 21.00 Rmt 36.80 Rs. Thirty Six & Paise

direction of Engineer incharge Eighty Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

139 Providing promoulded bituminous filler joints as per drawings (A)12mm etc 3.00 Sqm 548.31 Rs. Five Hundred Forty

complete as per direction of Engineer incharge. Eight & Paise Thirty

140 Provinding and fixing chicken wire mesh Jali 18 guage or fiber mash of 145 150.00 Sqm 64.06 Rs. Sixty Four & Paise

GSM and 0.18m wide with necessary screws and nails to joint between Six Only

R.C.C. column and brick etc. complete as per Engineer-in-charge. wiremesh

jali Shell contain to relevent IS Specification

141 Providing Supplying and Fixing S4 Channel System (S4 Channel+ Profile 25.00 Each 421.58 Rs. Four Hundred

Bracket U Bolt Rubber mounted System) for multiple Pipes for External Twenty One & Paise

Vertical Fixed line with wall distance 3" including nuts, bolts, fastners etc Fifty Eight Only

complete as per detailed Specifications and as directed by Engineer in

142 Providing Supplying and Fixing Single Pipe Bracket System with U Bolt 35.00 Each 182.83 Rs. One Hundred

Rubber mounted for Pipe Supporting Clamping System for External Vertical Eighty Two & Paise

Fixed line with wall distance 3 including nuts, bolts, fastners etc complete as Eighty Three Only

per detailed Specifications and as directed by Engineer in Charge.

Total Civil Amount =

Electrical Item Discription

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

143A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. 70.00 Point 481.00 Rs. Four Hundred

mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC Eighty One Only

insulated FRLS wire for earth continuity in FIA approved ISI mark medium

class white colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution erected on/in Brick Wall / slab along with

continuous G.I. fish wire to draw wires and laid in approved manner zari for

PVC pipe and boxes shall be filled with cement mortar and finishing the

surface to match the wall / ceiling complete with approved make 5/6 Amp.

ISI make modular type switch and accessories mounted in 20 G. G.I.

company fabricated metallic box covered with appropriate front plate

modules erected flushed with wall / ceiling with necessary modular lamp

holder / modular ceiling rose / HD Connector 75 mm deep GI box if require

( make & model approved by EIC and matching colour with switches

accessories) as directed for concealed wiring. Light point. Cat.-III.

Necessary sheet must be erected on all box to prevent mortar going into the

box.& for ceiling light Point & Junction box use deep Junction box of same

PVC Pipe make . Length of point wiring must not increase than 10 mtr. For

that necessary switch boards and their locations must be finalised before

execution by agency otherwise payment will not be done for extra long

point. (For future extention, if required, agency has to erect one higher size

metal box and modular plate as per instruction of EIC. Cost of blank plate

shall be paid as per tender item) [Wire must be having box packing][This

item include cleaning(inside/outside) of all GI switch boards,electric point

box,fan box,MCBDB & box cutting plaster finishing for modular plate

without any gap]

143B For Two Way Controlled Light Point Cat-III 10.00 Point 598.00 Rs. Five Hundred

Ninety Eight Only

143C For Bell Point Cat-III 1.00 Point 481.00 Rs. Four Hundred

Eighty One Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

143D For Fan Point.(with 6A Modular type switch and Two Module hum free 6.00 Point 668.00 Rs. Six Hundred Sixty

EME step type ISI make Electronic fan regulator ) Cat-III Eight Only

143E For Two Way Controlled Fan Point with with Hume free module type Eme 4.00 Point 785.00 Rs. Seven Hundred

5/6 step type electronic Fan with two module regulator Cat-III Eighty Five Only

143F For separate Point (with 6 Amp. Switch & 3/5 pin socket ISI make) Cat- 10.00 Point 505.00 Rs. Five Hundred Five

143G For loop on switch board ( with 3/5 pin socket and switch 6 Amp.) Cat-III 30.00 Point 255.00 Rs. Two Hundred Fifty

144A Providing and erecting Medium Class FIA approved and ISI mark white 110.00 Mtr. 24.00 Rs. Twenty Four Only

colour (embossed) RIGID PVC PIPES of following size complete erected

with necessary PVC fittings & Junction boxes fixed with adhesive solution.

concealed in wall / slab along with continuous fish wire to draw mains, laid

in approved manner. Zari for PVC Pipe & Boxes shall be plastering by

cement mortar & finishing the surface to match the wall / ceiling. 20 mm

144B 25mm dia. 29.00 Mtr. 33.00 Rs. Thirty Three Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

145A Providing & Erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 230.00 Mtr. 62.00 Rs. Sixty Two Only

KV grade with FIA approved ISI mark medium class 20/25/32 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution to be

erected on/in brick wall / slab along with continuous G. I. fish wire to draw

mains laid in approved manner with plastering by cement mortar &

finishing the surface to match the wall / ceiling complete with FRLS PVC

insulated wire for earth continuity. (Approved ISI make only) [a] 2 x

sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS

copper multi stranded conductor for earthing as per standard colour code.

(with 20 mm dia. PVC pipe) [Wire must be having box packing]

145B For 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 30.00 Mtr. 82.00 Rs. Eighty Two Only

sq.mm. FRLS copper multi stranded conductor earthing. (20 mm dia pvc

pipe)[Wire must be having box packing]

145C For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 70.00 Mtr. 146.00 Rs. One Hundred

sq.mm. FRLS copper multi stranded conductor for earthing as per standard Fourty Six Only

colour code. (with 25 mm dia. PVC pipe) [Wire must be having box packing]

145D For 4 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 60.00 Mtr. 258.00 Rs. Two Hundred Fifty

sq.mm. FRLS copper multi stranded conductor for earthing..As per Eight Only

standard colour code. (with 25/32 mm dia. PVC pipe)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

146A Providing & Erecting Plug Point wiring with 1.1 KV grade ISI marked 5.00 Each 738.00 Rs. Seven Hundred

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 Thirty Eight Only

sq.mm (green) copper PVC insulated FRLS wire for earth continuity in FIA

approved ISI mark white colour medium class 20/25 mm dia. embossed

rigid PVC pipe with PVC fitting fixed with adhesive solution erected in brick

wall/slab along with continuous G. I. fish wire to draw wires and laid in

approved manner zari for PVC pipe & boxes shall be filled with cement

mortar & finishing the surface to match the wall / ceiling complete with

Amp Modular type Swich and accessories mounted in 20 G. GI company

fabricated metallic box covered with appropriate front plate modules erected

flushed with wall. (a) 16 Amp Indicator switch & 1 No. 6/16 A universal

socket white colour suitable for 3 pin top duly both having ISI mark.

(Necessary Sheet Must Be Erected On All Box To Prevent Mortor Going In

To The Box) Cat.-III.

146B Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.0 sq.mm 5.00 Each 863.00 Rs. Eight Hundred Sixty

copper PVC insulated FRLS wire with 2.5 sq.mm (green) copper PVC Three Only

insulated FRLS wire for earth continuity in FIA approved ISI mark white

colour medium class 20 mm dia. embossed rigid PVC pipe with PVC

fitting fixed with adhesive solution erected in wall / slab along with

continuous G.I. fish wire to draw wires and laid in approved manner. zari

for PVC pipe & boxes shall be filled with cement mortar & finishing the

surface to match the wall / ceiling complete with approved make 20 Amp.

Modular type indicator switch and accessories mounted in 20 SWG GI

company fabricated metallic box covered with appropriate front plate

modules erected flushed with wall / ceiling. (a) 20 Amp Indicator switch &

No. 20 A universal socket white colour suitable for 3 pin top duly both

having ISI mark (A.C POINT ONLY) CAT III

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

146C Providing & Erecting Plug Point wiring with approved ISI marked 1.1 kv 2 4.00 Each 991.00 Rs. Nine Hundred

x 4.0 sq.mm copper PVC insulated FRLS wire with 2.5 sq.mm (green) copper Ninety One Only

PVC insulated FRLS wire for earth continuity in FIA approved ISI mark

white colour medium class 20/ 25 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution erected in wall/slab along with

continuous G. I. fish wire to draw wires and laid in approved manner.zari

for PVC pipe & boxes shall be filled with cement mortar & finishing the

surface to match the wall / ceiling complete with 1 No 25 Amp Modular

type Single pole MCB Swich and 1 no 25A universal 3 pin socket (Cat-II)

suitable for 3 pin top duty.mounted in 20 G. GI company fabricated metallic

box covered with appropriate front plate modules erected flushed with

wall.Above accessories will be erected combined or separately as per site

requirement and instruction of EIC. Cat II(Necessary Sheet Must Be Erected

On All Box To Prevent Mortor Going In To The Box) Cat.-III. (Gyser Point)

147A Providing & erecting Modular type accessories mounted on 20G. company 4.00 Each 159.00 Rs. One Hundred Fifty

Fabricated Galvanised Metal box covered with appropriate front plate Nine Only

modules erected flushed with wall / ceiling with : TV Co-axial Socket

147B For Blank plate single Cat-III 50.00 Each 25.00 Rs. Twenty Five Only

147C For RJ-11 Telephone Socket Cat-III 4.00 Each 159.00 Rs. One Hundred Fifty

148 Providing & fixing 25 mm. dia Pvc insulated G.I corrugated flexible pipe 30.00 Mtr. 37.00 Rs. Thirty Seven Only

with necessary socket, PVC bushes Saddle.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

149 Providing ad erecting approved make single phase Double Door metal clad 2.00 Each 5536.00 Rs. Five Thousand Five

D.B. as per relevant indian standards ammended upto date. Hundred Thirty Six

Supplying and fixing following way single phase MCB distrubution board of Only

company fabricated with sheet box with powder coated inside and outside

after apply seven tank chemical process of MCBDB Door, back Side & Body

must be made of 1.2 mm thick CRCA sheet cover complete with suitable

integral single piece construction tinned copper busbar and link with all

necessary interconnection and with necessary size MS frame for mounting

MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 &

IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder coating

Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface / recess complete with

loose wire box, terminal connectors for all incoming and outgoing circuits,

with suitable size FRLS PVC insulated copper conductor up to terminal

blocks and internal connection, tinned coppper bus bar, 1 no. tinned copper

neutral link, tinned copper earth bar, din bar, detachable gland plate,

interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

For 16 Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking

capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to

IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating 6 to

Amp. with NL suitable to operate on 240 Volt A.C. power. (6 Amp to 32Amp

SP MCB:-12 Nos as per site requirement & Instruction of EIC)

(The DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the

external edge with box cutting plaster) (Same colour MCB(SP/DP) should be

used as same as MCBDB) [Including Necessary numbering / marking on

box done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC on site as

per requirement

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

150 Providing ad erecting approved make Three phase Double Door Horizontal / 1.00 Each 2885.00 Rs. Two Thousand

Vertical type (as per site requirement and EIC instruction) outgoing per phase Eight Hundred Eighty

outgoing type (PPI) metal clad D.B. as per relevant Indian standards amended up to Five Only

date. Supplying and fixing following way Three phase MCB distribution board with

company wire links for internal connections having colour code and with suitable

lugs and company fabricated IK 10 certificate with sheet box with powder coated

inside and outside after apply seven tank chemical process of MS sheet cover

complete with suitable integral single piece construction, tinned copper busbar and

link with all necessary interconnection and with necessary size GI frame (if required

for surface type) for mounting MCBDB. Manufacturer must be provided (1) IP

and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank

Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link

with isolation & Protecting Cover for 440 Volts on surface / recess complete with

loose wire box, terminal connectors for all incoming and outgoing circuits, with

suitable size FRLS PVC 10mm2 insulated copper conductor with Pin type lug up to

terminal blocks and internal connection, tinned copper bus bar, 4 nos. tinned copper

neutral link, 4 nos. tinned copper earth bar, din bar-4 nos., detachable gland plate,

interconnections, powder painted including earthing etc.

Three phase incoming and single phase outgoing. Total quantity of wire

link: 13 Nos. For Three phase 6 Way Double Door PPI MCBDB (The DBs

should be used of same company of MCB / ELCB to be used) (MCBDB must

be erected in line & level with spirit level and finish the external edge with

box cutting plaster) (Same colour MCB(SP/DP) should be used as same as

MCBDB) [Including Necessary numbering / marking on box done with red

colour radium sticker as per site requirement and instructions given by EIC

on site. Font / number size given by EIC on site as per requirement]

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

151 Providing and erecting Miniature circuit breaker single pole 6 Amp. to 32 4.00 Each 111.00 Rs. One Hundred

Amp. suitable to operate on 240 V A.C. system and having breaking capacity Eleven Only

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark. Cat.III. [For 3-ph DB]

152 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 1.00 Each 730.00 Rs. Seven Hundred

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Thirty Only

having following capacity [c] 63 Amp. Cat.-III (3-ph DB incomer)

153 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 1.00 Each 1172.00 Rs. One Thousand One

Curve) having 10KA breaking capacity & confirms to IS :8828 with same Hundred Seventy Two

company metal box with earthing terminal having following capacity with Only

necessary Numbering with oil Paint by painter. [c] 63 Amp. Cat.-III

154 Providing and erecting Approved make ELCBs / RCCBs conforming to IS: 3.00 Each 2213.00 Rs. Two Thousand Two

12640 and having sensitivity of 30 mA and Short Circuit withstand capacity Hundred Thirteen Only

of 6 KA and suitable for operation on single phase 240 V. having

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as

directed (ii) For 40 Amp DP

155 Providing & erecting 240 V MCB Double pole switch for Motor and 8.00 Each 327.00 Rs. Three Hundred

inductive load (C curve) having 10 KA breaking capacity & confirms to Twenty Seven Only

IS:8828 in Existing M.S. box having following capacity. For 40 Amp. Cat:-III

(For 3-ph DB)(Spares)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

156 Providing and erecting 240 volt MCB double pole switch for lighting load(C 1.00 Each 599.00 Rs. Five Hundred

Curve) having 10 KA Breaking capacity and confirms to IS : 8828 with same Ninety Nine Only

company Metal box with earthing terminal having following capacity. with

necessary quarter Numbering with oil paint by Painter. (a) 40 Amp

Capacity. Cat III

157A Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 2.00 Each 7025.00 Rs. Seven Thousand

mm dia in soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing Twenty Five Only

electric rod must be made from Corrosion free Hot dip galvanizing pipes having

following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of

Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed

Brand Terminal Size: 70mm X 100mm length, Terminal Should be made from inner

pipe for that pipe must be pressed and gave rectangular shape so its work as a

terminal.The hot deep galvanising must be done after above process.Galvanised

thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with washer

suitable for 14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive material minimum

should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

(C) Back fill Compound:- Earthing compound should be capable to retain moisture

for long time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X

400 mm depth and Cover should be heavy duty cast iron with required size of

mm X 300 mm X 4 mm thick.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only]

[OEM has to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must

be measured with earth tester. Agency has to bring the earth resistance to at

least 02 ohms & voltage between neutral & Earthing upto 02 volt. Agency

has to maintain earthing & its value for one year. Earthing must be done in

the presence of A.E. (GSPHCL)]

157B For above earthing additional charges for boring in hard rock soil (by 2.00 Each 276.00 Rs. Two Hundred

breaker) & filling soft soil in earth pit (certificate for soil have to given by Seventy Six Only

DEE / AE along with photographs)

158 Supplying and erecting 8W led lamps with following wattage capacity of 220 6.00 Each 111.00 Rs. One Hundred

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge Eleven Only

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 LED Lamps integral type, with PC diffuser suitable

159 providing and erecting Polycarbonate body surface mounting LED Bulk 3.00 Each 780.00 Rs. Seven Hundred

head type 9 watt Lighting Fitting with electronic driver having THD<15% Eighty Only

,CRI>80,P.F.>0.95 And lumen output from luminaire 800lm , IP

protection ,input voltage range 90-300VAC , 50Hz cool white(3000 to 6500k),

inbuilt driver having THD > 80lm/w., -20degC to +60degC working

temperature, AL frame with Beam Angle 120deg.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

160 Supplying and Erecting LED indoor fitting of approximately 4feet long with 5.00 Each 370.00 Rs. Three Hundred

LED of wattage 0.2W to 0.5W assemble on single MCPCB with housing use Seventy Only

as a heat sink shall be made from Aluminum extrusion having enough

strength (sample must be approved by EIC) with polycarbonate diffuser

with following specification:

(A) Company mark/name on the fitting.(B) Rated input voltage and

frequency: 220V to 240 VAC ; 50Hz.(C) Rated input wattage: max. 24w(D)

Rated input current : 0.2 Amp(E) Power Factor : Min. 0.90(F) ATHD : Max.

15%(G) Rated Luminous flux: Min. 2420 lm(H) CCT: 6500K(I) CRI: Min.

80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @

L70(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M)

Surge protection : Min. 2KV(N) IP rating: IP 20(O) IK rating : IK 02(P) Short

circuit , Open circuit & Reverse Polarity Protection must be provided(Q)

Fixing clamp design & strength should be sufficient to hold the fitting

erected on wall or ceiling.(R) 3 core copper wire of appropriate size with

earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 4 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

161 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W Cool/Warm 7.00 Each 751.00 Rs. Seven Hundred

white Color LED Down lighter office Lighting Luminaire with separate potted Fifty One Only

driver with single piece pressure die cast aluminium alloy housing with corrosion

resistant powder coated finish with PMMA/PS/Injection moulded Polycarbonate

diffuser with high brightness LED complete (only from Philips Lumileds, CREE,

Nichia, Bridgelux, Seoul & Osram) CRI > 80, CCT 5600K (5400 to 5800K bin). The

LED's should be mounted on back lit metal core PCB for better heat conduction and

long life of LED. The Fixture should comply all International Standarad third party

(LM 79 for complete fixture, LM80 for individual LED). The Fixture have protection

like miswiring, over voltage, over load, wrong wiring, THD < 15%,, P.F > 0.95,

efficiency ≥ 90 lm/w & driver efficiency > 85%. For 24 W fixture wide voltage range

from 160 V to 270 V, 50/60 HZ @ 240V application, 4 KV surge protection.The fixure

must have min. 2160 lumen light output. The fixture should be provided with

external separate Potted driver, latest Valid BIS approved Luminaire and driver.

The Fixture efficiency ≥ 90 lumens/watt only for safety and performance. (L70 @

30,000 Hrs.) The fixture should be able to easily mount on POP / Grid false ceiling.

The Luminiare should be tested as per IP 20 and following test reports should be

submitted at the time of approval: heat resistant test, thermal test, Ingress protection

test, drop test, Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirement [Note:-The manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs. free replacement Guarantee for complete Fixture

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

162 SITC of Indoor Commercial Recess / Surface mounted (IP20) 12 W Cool/Warm 27.00 Each 423.00 Rs. Four Hundred

white Color LED Down lighter office Lighting Luminaire with separate potted Twenty Three Only

driver with single piece pressure die cast aluminium alloy housing with corrosion

resistant powder coated finish with PMMA/PS/Injection moulded Polycarbonate

diffuser with high brightness LED complete (only from Philips Lumileds, CREE,

Nichia, Bridgelux, Seoul & Osram) CRI > 80, CCT 5600K (5400 to 5800K bin). The

LED's should be mounted on back lit metal core PCB for better heat conduction and

long life of LED. The Fixture should comply all International Standarad third party

(LM 79 for complete fixture, LM80 for individual LED). The Fixture have protection

like miswiring, over voltage, over load, wrong wiring, THD < 15%,, P.F > 0.95,

efficiency ≥ 90 lm/w & driver efficiency > 85%. For 12 W fixture wide voltage range

from 160 V to 270 V, 50/60 HZ @ 240V application, 4 KV surge protection.The fixure

must have min. 2160 lumen light output. The fixture should be provided with

external separate Potted driver, latest Valid BIS approved Luminaire and driver.

The Fixture efficiency ≥ 90 lumens/watt only for safety and performance. (L70 @

30,000 Hrs.) The fixture should be able to easily mount on POP / Grid false ceiling.

The Luminiare should be tested as per IP 20 and following test reports should be

submitted at the time of approval: heat resistant test, thermal test, Ingress protection

test, drop test, Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirement [Note:-The manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs. free replacement Guarantee for complete Fixture

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

163 SITC of Spot light of 5 W, The led's should be mounted on metal core based 6.00 Each 805.00 Rs. Eight Hundred Five

PCB for better heat conduction and long life of LED. The Fixture should Only

comply all International Standarad third party (LM 79 for complete fixture,

LM80 for individual LED). Fixture wide voltage range from 100 V to 270 V,

50/60 Hz. The Fixture have protection like miswiring, over voltage, over

load, wrong wiring. The min. lumen output of fixture 90Lumens/watt. The

fixture should be provided with external separate Potted driver BIS

approved only for safety and performance. (L70 @ 20,000 Hrs.) The

Luminiare should be tested as per IP 20 and following test reports should be

submittedat the time of approval, heat resistant test, thermal test, Ingress

protection test, drop test, (Lighting Technologies, Philips, OSRAM, GRE,

Pyrotech, Orient, Havells, Ensave make & model approved by EIC subject to

above specification) [Note:-The manufacturer / authorised Channel partner

of the manufacturer has to submit 4 yr free replcement Guarantee for

complete Fixture]

164 Providing and erecting 10 watt LED battern mirror light(1 feet/2 feet as per 6.00 Each 309.00 Rs. Three Hundred

Mirror size ) having main housing aluminium extruded & front cover of Nine Only

polycarbonate . Electrically & photomatry parameters are as under : 240 V,

50 Hz, sysem voltage : 10w+10% ,PF 20.95 system Lumens min.1000 CCT

:3000K to 6500K ,CRI >80,THD<15 % ,Delivery Efficiency > 85 % LM

80Certified LED, 30,000 hrs@L70, Elecronic CC driver , insulated copper

wire for internal wiring ,IP20, Operating voltage :160 to 270 V, Surge -2KV

length og this fitting decided by EIC

165 White Foot Light with concealed box, modular accessories, acrylic glass 4.00 Each 553.00 Rs. Five Hundred Fifty

cover with 1x3w LED light (b) Four modules Three Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

166 Supplying, Installing, Testing & Commissioning of 40 W LED Outdoor type 5.00 Each 4772.00 Rs. Four Thousand

Post top Lantern light with IP65 protection with housing made of sturdy Seven Hundred Seventy

aluminium die cast housing with radiating cool surface and milky white Two Only

high quality PMMA round cover with corrosion resistant Grey colour

powder coating with high efficiency potted driver with necessary safety

precautions, 10 kv surge protection device with high min. 44000 lumens LED

with long life of 30K @ L70 (L70@30000 hrs.),PF>0.9 Installation bracket as

per site requirement, accessories 3C X 1.5 Sq.mm copper flexible wire upto

terminal box etc. [Make:- Lighting technologies / Philips / Wipro / Pyrotech

/ Crompton / GRE make & model approved by EIC only] (Note:-The

manufacturer / authorised Channel partner of the manufacturer has to

submit 4 years free replcement Guarantee for complete Fixture)

167 Poviding and erecting decorative dust proof wall mounting SS finish fixture 5.00 Each 1650.00 Rs. One Thousand Six

with opal glass diffuser with 5W TU retrofit LED Lamp as per EIC direction. Hundred Fifty Only

( Havell's Philips, crompton, Bajaj, make & model approved by EIC

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

168 Supply, Installation, Testing and Commissioning of 1200MM sweep, BEE 5 8.00 Each 2603.00 Rs. Two Thousand Two

Star rated, Max. 30Watt Ceiling fan with Brush Less Direct Current (BLDC) Hundred Eighty Nine

permanent ferrite magnet Motor, class of insulation: B/E, Double ball Only

bearings, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, copper winding, Power factor not less than 0.9, Service

Value (CMM/W) minimum 7.5, Air delivery minimum 220 CMM, Minimum

350 RPM,230v (tolerance as per IS : 374-2019), THD Less Than 10%,

compitible with electronic regulator unit for Five Speed Control and all

remaining accessories including safety pin, nut bolts, washers, temperature

rise equal to 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier

circuit with surge, over current and overload protection , 50 Hz, Single phase

AC Supply, earthing etc. Complete as required Down Road up to 1.0Mtr as

per site requirement. For 1200mm Sweep(48")(make Havells Efficiencia Dx,

Bajaj Energos 28 & Crompton make & model approved by engineer in

charge subject to above specifications)

169 Supplying and erecting approved make oscillating type bracket fan A.C. 230 2.00 Each 2509.00 Rs. Two Thousand Five

V. 50 Hz, 400/450 mm sweep wall mounted with height adjustment and Hundred Nine Only

rotary tilting device complete with guard, flexible Core plug top complete

erected with lead wires as directed. (Crompton Make High Flow model)

170 Providing & erecting fresh air fan 250 mm dia with square frame make of 4.00 Each 1544.00 Rs. One Thousand Five

ABS body with louvers. Hundred Fourty Four

171 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe 15.00 Rn. 107.00 Rs. One Hundred Seven

down rod erected duly painted for fan complete with necessary 24/0.2 flat 3 Mtr. Only

core flexible Core with earthing. (Execute if fall ceiling occurs)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

172 Supplying and erecting Fan hook of 10 mm M.S. round bar bounded to the 8.00 Each 125.00 Rs. One Hundred

RCC bars up to 50 mm length each side and pierced through a 16 Gauge Twenty Five Only

M.S.box having depth of 75 mm complete erected concealed in ceiling with

necessary 3 mm white ISI laminated sheet.

173 Decorative musical call bell Stereo type 250 Volt complete erected on 1.00 Each 170.00 Rs. One Hundred

existing polished wooden block or in M.S. box with 3mm thick white ISI Seventy Only

mark laminated sheet. (Anchor -Chime model )

174 Supplying & erecting 12 mm thick backelite sheet of approved make and 1.00 Sq.M 2289.00 Rs. Two Thousand Two

grade on25x25x3mm red oxide painted angle iron frame suitable for fixing tr. Hundred Eighty Nine

ICDP SWITCH and energy meter (contractor shall make approved drawing Only

of Bakelite sheet To arrange required NO of Energy meter& ICDPswitch -

busbar etc as per Actual space available in electrical room at site)

175 Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted with 200.00 Sq.In 5.94 Rs. Five & Paise Ninety

red oxide be concealed in wall with necessary plastering & finishing covered ch Four Only

with 3mm thick Laminated sheet with grooving as directed of following

depth. 3" Depth

176 Providing and erecting metallic vitrified danger notice board as per 1.00 Each 69.00 Rs. Sixty Nine Only

language suggested by engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

177 Providing and Erecting following size of TV Co-axial flexible cable 121.00 Mtr. 39.00 Rs. Thirty Nine Only

comprising inner conductor of solid bare copper insulated with Foam PE &

Secondary conductor made of poly – Aluminium film bonded Al. Braids @

coverage of 65% overall sheated with black PVC insulation

(FINOLEX/RRCABLE/POLYCAB/ HAVELLS)a. RG-6

178 Supplying & erecting approved make Telephone Cable electrolytic copper 120.00 Mtr 20.00 Rs. Twenty Only

conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of following size of

conductors & nos.of pairs. With necessary connections.[A] Conductor Size

0.5 mm ; (a) Unarmoured(a) Two Pairs ( RRCAB/ Finolex/ Havells make

179 Providing & erecting Tag Box for Telephone Lines suitable for 10 Pairs 1.00 Each 985.00 Rs. Nine Hundred

Krone type complete with Krone & locking arrangements. Eighty Five Only

180 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper 175.00 Mtr. 361.00 Rs. Three Hundred

cable for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with Sixty One Only

suitable 1.6mm thick G.I. heavy guage cable clamp or in existing DWC pipe

underground or road crossing or floor. (a) For 4 core x 4 sq.mm.

181 Providing & fixing double compressed heavy duty flange type brass cable 15.00 Each 47.00 Rs. Fourty Seven Only

gland with rubber ring for PVC insulated armoured cable complete with

outgoing tails, insulating tape etc. For following size cables.(Sigma, MCI,

Comet Make Only)For 4 core X 4.0/6.0 Sq. mm.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

182 Solderless crimping type Copper lugs conforming to IS suitable for cable of 80.00 Each 8.00 Rs. Eight Only

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. For 1.5/2.5 to 6 Sq.mm Cable

183A Providing & Erecting Mains with ISI marked, 1.5KV grade electrolyte multi 50.00 Mtr. 56.00 Rs. Fifty Six Only

stranded, annealed copper conductor with heat resistant PVC insulated with

required copper lugs in existingconforms to IS 694, IEC - 227 erected in

existing pipe of following size with required size of copper lugs, nuts and

bolts if required.One wire 6.00 sq.mm.

183B For One wire 10.00 sq.mm. 30.00 Mtr. 91.00 Rs. Ninety One Only

184 Providing & laying HDPE Double walled corrugated pipes (DWC) 130.00 Mtr. 117.00 Rs. One Hundred

(conforming to IS: 16205 (part 24) 2018)) with minimum load required of Seventeen Only

450N capacity with anti rodent and ultra violet material properties with

necessary connecting accessories of same material at required depth to be

laid 90 cms. under ground for laying of cable below ground / road surface

for enclosing cable and back filling the same to make ground as per original.

(A)For Outer dia.50mm and Inner dia. 38mm (Test Certificate to be

185 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cms. below 6.00 Mtr 224.00 Rs. Two Hundred

ground across the road crossing or on floor with necessary material in an Twenty Four Only

approved manner and making the ground as per original.(C) For 100 mm

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

186 Providing bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside 6.00 Each 487.00 Rs. Four Hundred

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and Eighty Seven Only

required size and length suitable for 76.5 / 80 mm. required size of pole top

having nuts and bolts for fixing the brackets and having spread of 0.5 to

mtr. length with suitable rise as per site condition and suitable welded

stiffner reducer and nipple with check nut complete painted with one coat of

red oxide and two coats of alluminium paint. (a) For single arm bracket.

(Asian Fab Bajaj Ambica make only) Test Certificate To Be Submited.

187 Providing & erecting approved make street light / wall mounting junction 2.00 Each 610.00 Rs. Six Hundred Ten

box compression moulded from SMC (thermoset plastic) vertical sliding Only

cover having locking with square head stud loop in / loop out in built

terminal suitable for four core cable, waterproof of I.P. 54 protected with

clamp or bolt nut & earth bolt of following size.[B] 250mm x 194mm x

188 Supplying and erecting Fabricating terminal box for street light pole made 2.00 Each 702.00 Rs. Seven Hundred

from 16 SWG M.S. sheet having following size complete with fixing Two Only

arrangement for terminal board, with necessary hole for wire entry and exit

from the box. The box shall be provided with cover and hinges on one side

and bolting at other end The box shall be fixed by clamps fabricated from

25mm x 6mm flat.The box shall be painted with one coat of red oxide and

two coats of paint having following box size 330 mm x 260 mm x 140 mm

(depth). And Providing and fixing Terminal board of size 5.0 x 127 x

mm. bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit with

suitable brass studs with nuts, washers and clamps of size 25 mm x 3 mm

suitable for pole painted with one coat of red lead paint.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

189 Coil Type Earthing Having coil Made From 8 SWG Hot Deep Galvanized 6.00 Each 369.00 Rs. Three Hundred

iron Wired wrapped On 50 MM OD Round Pipe Having Minium 50 Turn( Sixty Nine Only

Approximately 200 mm lenght) & Having Contineous lenght Of 3 Mtr Gi

wire To Connect Earthing Bolt & Burried In Specially Prrepared Earth Pit

Complete With Salt & Charcoal/Coke As Required For Coil Type Earthing

(Approximately Weight Of Coil 1 To 1.1 KG)

190 Providing & erecting Light class G.I. "A" grade ISI make pipe having 25 mm. 10.00 Mtr. 171.00 Rs. One Hundred

dia. to be erected at road crossing or on floor as directed for laying cable. Seventy One Only

191 Providing & Erecting 3 core 1.5 sq.mm. PVC insulated round copper wire ISI 50.00 Mtr. 46.00 Rs. Fourty Six Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

192 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light Luminaire 6.00 Each 3512.00 Rs. Three Thousand

with total consumption of Max. 45 W with single piece die cast aluminium housing, high Five Hundred Twelve

power LED shall be mounted on high quality metal core PCB with extremely precison

designed heat sink complete with IP66 protection Class with polycarbonate / thoughened

glass cover the fixture should be suitable for pole/bracket mounting. The fixture to comply

both LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with toughen

Glass L70 at 50,000 hrs, provided with high quality polycarbonate lenses for better light

distribution. The Fixture Should be able to be Pole Mounted and also bracket mounted,

provided with high quality driver for protection against high and low Voltage cut Off,

opertional for high amibient and high humid envirnoments, THD of driver should be less

than 10% and P.F > 0.95. Also the Fixture should meet the following technical criterias

Oprating range Voltage 120 to 300 V, system efficiency >= 110 lm/w, and total lumens not

less then 4950, CCT > 5000K, CRI > 65, beam angle 120 deg, surge immunity level at least

KVThe Separate Potted driver should have over current, over voltage protection, short

circuit protection so that the fixture recovers once the fault is removed. In addition to the

above product should be operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH. (GRE make GPH-SL-43W model, Lighting Technology,

Pyrotech make PAN-PE-11-P-43X0A model only) (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 4 yrs free replcement Guarantee for

complete Fixture)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

193 Supplying and erecting approved make Octagonal pole made from HR sheet 6.00 Each 6917.00 Rs. Six Thousand Nine

steel. The pole should be made as per IS. and shall be coated with hot dip Hundred Seventeen

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed Only

with integral Junction box with Hot Deep Galvanised door having 2 nos.

180° operated hinges & 2 nos. Ln key locking with silicon rubber gasket.

Consist of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail & MCB , Brass stud type terminal and arrangement

for cable termination to be erected on RCC foundation as per details given

by manufacturer and EIC considering site requirement.

Foundation Details: 1) Grade of RCC 1:2:4, 2) Grade of steel rainforcement of

RCC FE 415, 3) Clear cover to rainforcement 50mm, 4)Concrete vibrated, 5)

use suttering / farma, 6)Hot deep galvanized average 70Micron, 7) Detail

drawing will be given by corporation. ( C ) 5 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-

M16 Bolts and 600mm long hot deep galvanized J-Bolt, nuts, washers with

800mm under ground and 200mm above ground level and 450mm dia.

Foundation in 1:2:4 proportion.

194 Providing & Erecting Univesal Astro interlligent Street light Control Syatem 1.00 Each 12895.00 Rs. Twelve Thousand

insu with weather proof box for indoor allplication 5KVA ( as Per atteched Eight Hundred Ninety

Specification) Five Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

195 Providing open well type horizontal submersible mono block pump set with 2.00 Each 9518.00 Rs. Nine Thousand Five

cast iron body having following specification [b] For 1 Phase open well Hundred Eighteen Only

horizontal mono block pump set suitable for 185 LPM @ 25 mtr head

suitable for 32 mm dia. delivery pipe with 10 mtr necessary Size 3 Core Flat

copper flexible cable. (Body : Cast iron / Winding : Copper / stator : Copper

/ rotor : Copper / shaft : SS 304 material test certificate from manufacture

shall be submitted).

For 1 HP 1 phase open well pump single/ multi stage as per actual head

requirement as per site situation.

The model of the pump with respect to head and discharge will be approved

Pump should have following specification.

(1) Minimum 10mtr cu. flat cable of suitable size must be provided with

(2) Pump shall be installed as per manufacturer foundation/ erection

drawing or as per IS specification.

(Body full CI, stator winding- copper, rotor- copper, shaft- SS304, motor-

Energy efficiency)

196 Lowering of existing submercible motor pump set complete with required 2.00 Each 848.00 Rs. Eight Hundred

No. and size of pipes by means of proper chain pulley block and pipe Fourty Eight Only

wrenches. Job includes stacking of pipes cronologically after the checking of

threads. For open well horizontal submercible pump set for sump well. (i)

197 Providing & erecting ISI make medium duty (B class) galvanized MS pipe 30.00 Mtr. 175.00 Rs. One Hundred

with coupling, bend, union, reducer, tee, MS flange etc. with plumbing Seventy Five Only

charges. [f] 32 mm dia.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

198 Supplying and erecting C.I. Swing check type non-return (reflux) valve ISI 3.00 Each 750.00 Rs. Seven Hundred

marked with packing, flange, nuts and bolts etc.suitable for following pipe Fifty Only

size. [c] For 32 mm dia.

199 Supplying Water tight M.S.Box of size 20 x 15 x 15 cms. to erect suitable 2.00 Each 232.00 Rs. Two Hundred

kitkat fuse / MCB to be . erected on polished wooden board inside the box Thirty Two Only

with hinged/sliding door with rubber rings and erected on pole with

suitable pole clamp, all duly painted with one coat of red oxide and two

coats of paints. (Cost of Fuse / MCB shall be taken extra) [Provision for

motors cable joints near sump]

200 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 30.00 Mtr. 103.00 Rs. One Hundred Three

Submersible copper cable approved make of following Size. [d] 3 Core x Only

201 Providing water proof straight joint in PVC insulated flat flexible copper 2.00 Each 188.00 Rs. One Hundred

cable by using insulated material water proofing material and making the Eighty Eight Only

joint complete. UP to 10 Sq.mm

202 Carry out RCC Core cutting- up to 100 mm dia./300mm thick 2.00 Each 1534.00 Rs. One Thousand Five

Wall/beam/slab with providing PVC pipe of 3 mm thick inside and Hundred Thirty Four

necessary finishing on both ends of wall with PVC sleeve, end cap both side . Only

203 Providing & Erecting PVC Panel perforeted duct standard slot of Size 56.00 Rn. 151.00 Rs. One Hundred Fifty

45mm X 45mm (Make:Precision or Premium or Equivalent make approved Mtr. One Only

by EIC)with required size of screw as directed by EIC RA

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

204 Providing and erecting Meter cover made from multi chamber hollow PVC 3.00 Sq.M 3306.00 Rs. Three Thousand

sections of 20 mm thick having all the corner joints with PVC solution angles tr. Three Hundred Six

without using any screws, nails shutters having required size of eye glass Only

and with necessary locking arrangement hinged with box. The back of

meter box should be fixed with timber. Hold fast for holding screws or nut

Total Civil.Amount (Rs.)

Total Electrical.Amount (Rs.)

Signature of contractor Executive Engineer.

Gujarat State Police Housing Corp. Ltd.