Construction of 5.54Km 33KV line on ACSR Panther Conductor with shifting of line from Nagar Nigam office Rishikesh to 33/11KV SS Tapovan Garhwal AND Construction of SGR Building other Misc. Civil works at 33/11KV Substation Tapovan, Tehri Garhwal

Amount

STP Pole SP- 55(BPHD)

STP Pole SP- 72 (BPHD)

ACSR Panther Conductor

ACSR DOG Conductor

ACSR Rabbit Conductor

33 KV disc insulator B&S 120KN

Disc Fitting B&S type 90 KN for panther

33 KV pin insulator

33 kv pin with Nut

11 KV Polymer pin insulator with pin

11 kv polymer disc insulator

Disc fitting B&S type 45 KN

Post Insulator For 33 KV

MS Channel 125x65 mm

MS Channel 100x50 mm

MS angle75x75X6 mm

MS angle65x65X6 mm

Earth rod 20x2500 mm

stay Set 20x1800 mm

Stay Wire 7/8

Earth Wire 7/16 SWG

GI Wire 6 SWG

33 KV Light arrester

33 kv line isolator

Bus Isolator 800 Amp 33 KV

33 KV VCB 1250 A 24 V DC With Structure

33KV PT 33 KV/110 V

Junction box for 33 kv PT

33 KV CT Outdoor(400/200/01 A)

Junction box for 33 kv CT

Control panel FDR 33 KV Single CKT.

24 Volt Battery Charger

24 volt Battery Set

Control cable 2x2.5 Sq.mm

Control cable 10x2.5 Sq. mm

LT PVC Cable 4x2.5 Sqmm

Cable Al. 3x400 Sq.mm XLPE 400 Sq. mm

Cable Jointing Kit for 3x400 Sq.mm XLPE 33 kv Cable O/D

LT XLPE AB Cable 3x120+1x95+1x16 Sq.mm

LT PVC Cable 4x10 Sqmm

LT PVC Cable 4x16 Sqmm

LT PVC Cable 2x6 Sqmm

MS PP Holding Clamp with Nut & Bolt for SP-72

MS PP Holding Clamp with Nut & Bolt for SP-55

Stay Clamp(SP-72 With N& B

Stay Clamp(SP-55 With N& B

Earth Wire Clamp For SP -75 Pole With N& B

Earth Wire Clamp For SP -55 Pole With N& B

Bracing Clamp For Sp-72 top With N& B

Bracing Clamp For Sp-72 bottom With N& B

Bracing Clamp For Sp-55 top With N& B

Bracing Clamp For Sp-55 bottom With N& B

F- Clamp for 33 kv pin insulator With N& B

PG Clamp panther TO DOG

PG Clamp panther TO panther

Barbed Wire @ 2 kg on per pole

Eye Bolt 190x16 mm with n&b

Nut & bolt off size

MS Flat 50x6 mm

MS Plate 400x400x8 mm

Stud Clamp For SP-72 Pole With N& B

Street Light Holding Clamp Suitable For SP-72/55 Pole With N& B

Connectors suitable for Panther Conductor 1. For LA suitable for Panther

2. For Isolator suitable for Panther

3. For CT/PT suitable for Panther

4. For 33 KV VCB suitable for Panther

Poly Carbinate Seal Triple lock

Single Phse Empty Meter Box

Three Phse Empty Meter Box

LT Shackley insulator clamp for SP-72 With N& B

LT Shackley insulator clamp for SP-55 with N& B

LT Shackley insulator 100x115 mm with N& B

Stay Insulator

Description of Work / Item(s)

Amount

Excavation of earth for pole of pit of size 0.9x0.6x1/6 of full lenghth of pole for erection of pole In all type of soil including proper dressing of sides and ramming of botom including getting out the excavated soil and disposoal of surplus excavated soil as directed complete work 1. STP Pole SP- 55

Excavation of earth for pole of pit of size 0.9x0.6x1/6 of full lenghth of pole for erection of pole In all type of soil including proper dressing of sides and ramming of botom including getting out the excavated soil and disposoal of surplus excavated soil as directed complete work 1. STP Pole SP- 55

Erection of following Pole support pole in proper level and alignmen along with fixing of all accessories like top channel and clamps 1 STP Pole SP- 55 SINGLE POLE

2. STP Pole SP- 72 SINGLE POLE

3. STP Pole SP- 55 DOUBLE POLE

4. STP Pole SP- 72 DOUBLE POLE

Grouting of pole in size 0.45x0.45x1/9of the support in CC ratio 1:4:8 block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment , & leveling 1. STP Pole SP- 55

2. STP Pole SP- 55

Muffing of poles size 0.45 cmx0.60cm radious with CC 1:3:6 BLOCK SIZE 45 Cm. height from ground level including cost cement stone and sands

Special Type Excavation of earth for pole & Grouting of pole (2x3.5x3.5)x2 mtr abaove ground level in chanderbhaga River

Excavation of earth for stay pit of size 0.6x0.6x1.2 I all type of soil including proper dressing of sides and ramming of botom including getting out the excavated soil and disposoal of surplus excavated soil as directed complete work

Fixing Tightning And nozzaling of stay with pole and stay rod on required tesion for 33 KV line

Grouting of stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment , &leveling

Uprooting /cutting of existing LT/11 KV single Pole with all accessories.sp-21/23

Uprooting /cutting of existing 11 KV single Pole with all accessories.sp-55

Uprooting /cutting of existing 11 KV single Pole with all accessories. Joist pole

Dismantaling of existing 11 KV Line ACSR Rabbit conductor with opening all jumper and connection(payjal line,mkr,ramjhulla,swargashram feeder)

Dismantaling of existing 33 KV Line of ACSR Dog conductor with opening all jumper and connection(AT Tapovan & Rishikesh)

Dismantaling of existing LT Line of XLPE AB Cable with opening all jumper and connection complete with all accessories ie clamps box ,PRC, etc.

Dismantaling of existing Street Light lamp with opening all connection and install on new structure complete with all fitting and connection

Disconnection & reconnection of Sigle Phase Consumer Connection

Disconnection & reconnection of three Phase Consumer Connection

Fabrication of angle channel

Fixing triangular type bracket in 33 kv line

Fixing triangular type bracket in 33 kv line For Making Composit Line

Fixing triangular type bracket for 11 kv line For Making Composit Line

Making of a section pole for 33 kv line

Making of a section pole for 11 kv line

T- Off connection complete for 33 kv line

Laying Spreading,Stringing, and sagging of ACSR Panther conductor 3Ph. 4 With Earth wire, complete including fixing of all accessories in 3 No. conductor in parallel with binding and jumpering as per profile and sagging chart

Laying Spreading,Stringing, and sagging of ACSR DOG conductor 3Ph. With Earth wire, complete including fixing of all accessories in 3 No. conductor in parallel with binding and jumpering as per profile and sagging chart

Laying Spreading,Stringing, and sagging of ACSR rabbit conductor 3Ph. With Earth wire, complete including fixing of all accessories in 3 No. conductor in parallel with binding and jumpering( as per required at the time of work)

Laying Spreading,Stringing, and Resagging of dismentled 11 KV ACSR Rabbit conductor On new Structure

Laying Spreading,Stringing, and resagging of dismentled 33 KV ACSR DOG conductor On new/old Structure

Laying Spreading,Stringing , and resagging of dismentled XLPE ab Cable And new cable On new Structure complete with all Supporting Work

Gaurding of 33 kv line Complete As per upcl norms(Four span in single sag and tightning on eye bolt)

Gaurding of 11 kv line Complete As per upcl norms(Four span in single sag and tightning on eye bolt)

Dismantling of 33 kv Cable From Existing Double Pole and placed safe site Complete With Opening all Connection at near rishikesh substation

Laying Of old 33 kv Dismental Cable on New Structure complete with making connection at near rishikesh substation

Laying of 33 KV Cable by excavation of cable trench in mixed soil properly laying of the cable by placing bricks on both side & top of the cable filling of 250 mm layer sand from the top so as to cover the cable completely and then filing excavated soil upto 300 mm then spreading of cable warning tape & covering of the trench completely with excavated mixed soil, compacting the soil upto ground level including cost of sand, first class bricks, etc.

Jointing and fixing cable J/K 33 KV O/D 400 Sq. mm

GI Pipe Suitable For Holding 400 Sq.mm XLPE Cable With min. 2 No.Clamp and holding support on SP 72 Pole complete with Fitting and laying 33 kv cable on dp with making connection

Construction of MS Channel Structure on Four pole structure for installtion of LA, 33 KV CT/PT (03 No.), Post insulator, Line Isolator.and 33 KV Outoor VCB (at Nagar nigam Rishikesh Location)

Excavation of Earth in Mixed Soil for CT/PT/LI/BI/LA etc structure

cement concreting in 1:3:6 ratio for CT/PT/LI/BI/LA etc structure

Cement plaster 1:4 on top and side wall of foundation structure above ground level

Erection charges of structure for CT/PT/LI/BI/LA etc

Installation Of 33 kv CT & junction box With all connection

Installation Of 33 kv PT & junction box With all connection

Errection of 33 FDR Pannel in all respect making connection including testing and commissioning

Excavation of earth for errection of 33 KV VCB structure

Grouting of structure of 33 kv vcb in cc 1:3:6

Errection of 33 KV VCB in all respect making connection including testing and commissioning

Errection of 33 KV Line Isolator in all respect making connection

Errection of 33 KV bus Isolator in all respect making connection

Making Electrical connection of pannels by control wiring complete with CT/PT/Meter/relay and VCB complete with providing req. material i.e imsulation tape ,lugs,ties,coding tape etc.

Painting of isolator/LA/CT/PT Structure complete with one coat of red oxide paint & two coats of Al. Paint of best Quality.

Digging of trench of size 0.60x.15x0.9 mtr and laying of under ground Control cable with making brick housing and filling of sand including filling of earth with ramming and repairing of road including cost of cement sand stone blast.

Laying Of control cable in existing trench with all supporting work

Providing And Fixing Wire Mesh Fencing around the outdoor CT/PT/LA/LI/BI/VCB Structure At nagar Nigam Office Rishikesh structure for safety & protection purpose complete as per UPCL Noems.

Erection and earthing of support with MS earth Rod complete as per UPCL Norms.

Chemical Earthing of Following StructureWith Providing All material As per Upcl Norms With Green Paint On MS Earth Strip and also connect with existing earth mat. 1. 33 KV VCB Structure

2. 33 KV CT Structure

3. 33 KV PT Structure

4.33 Kv line/bus Isolator Structure

5.33 KV FDR Panel Structure

Providing And Fixing Danger Board And Number Plate Complete By Providing Clamps of MS Flat 50x6 mm and nut bolt Danger board of MS Sheet 2 mm Thick 11''x7'' Size Including Cost of material

Painting of Poles And angle channel and all steel part by one coat of red oxide primer and two coat of Al. Paint & top postoffice red color . And two Strip of fluorescent altemate Red And White Paint 300 CM Wide upto 1.5 Mtr From Ground Level 1 ST POLE SP-55

2 ST POLE SP-72

Route cleareance by cutting of tree branches/porning, loping and chopping of tree for 33 kv and other line

Binding Of Barbed Wire complete fitting and providing with ms Flat clamps and Not Bolt

Back head load cartage of followinf material from work site to road site including loading & unloading at both end with safe stacking (0-1 km.) ST Pole scrap and other meltable scrap

Back cartage of followinf material from work site to JE store by pvt. Truck including loading & unloading at both end with safe stacking (0-20 km.) (I ) ST Pole scrap and other meltable scrap

Earth work in excavation by mechanical means (Hydraulic excavator ) manual means in foundation tranches (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. (All kinds of soil).

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5m

Supplying and filling in plinth with Jamuna sand under floors including. Watering, ramming consolidating and dressing complete.

Supplying and stacking at site. Good Earth/Miscellaneous work

Clearing jungle including uprooting of rank vegetation, grass, brush wood trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level:1:2 :4 (1 Cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level:1:4 :8 (1 Cement :4 coarse sand: 8 graded stone aggregate 40 mm nominal size) P.C.C. (1:4:8) in foundation /Footing Trangular 8x1/2 AND Footing Trangular 4x1/2/L.W./S.W./For Appron Wall/P.C.C Appron/Switch Gear room/For Appron

Providing and laying damp-proof course 40 cm thick with cement concrete 1:2:4 ( 1 cement :2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) (2 x 8.35 + 2 x 3.00 -3.115-1.50-2x.45)= 17.19

Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement. Dpc/Latak beam/slab

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level: 1:1:5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 cm nominal size). Fondation R.C.C F1 / 0.20/3 (0.18+1.82+0.57)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement. 1:1:5:3 (1 cement : 2 coarse sand 4 graded stone aggregate 20 cm nominal size). Columns

Reinforced cement concrete working beams, suspended floors, roofs having slope up to 1.5 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral/ stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 P.Band (2 x 8.81+ 2 x 3.00 - 6 x 0.45) Door band (2 x 8.81 + 2 x 3.00 - 6 x 0.45 ) Latak beam SLAB BEAM Slab Sun Shed (1.96X3)

Centering and shuttering including strutting propping etc. and removal of form for: Foundations footings, bases of columns, etc. For mass concrete. F1

Centering and shuttering including strutting propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. Ceiling of S.G.R /Slab Projection (8.81+2 x 3.00)*0.60/Miscellaneous Work

Centering and shuttering including strutting propping etc. and removal of form for: Shelves (Cast in situ) Miscellaneous Work

Centering and shuttering including strutting propping etc. and removal of form for: Lintels, beams, plinth beams girders, bressumers and cantilevers, Plinth beam/Door Band/Slab Beams/Latak beam Beam/Latak Beam Bottom/For Miscellaneous Works

Centering and shuttering including strutting propping etc. and removal of form for:. Columns, Pillars, Piers, Abutments, Posts and Struts. Columns C1 (2 x 6 ) C1(2 x 6 )

Centering and shuttering including strutting propping etc. and removal of form for:. Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. Miscllaneous

Centering and shuttering including strutting propping etc. and removal of form for. Weather shade, Chaffas, corbels etc. including edges. Sun shed (1.96x3) = 5.88 sun shed side (1.96x3+ 0.45x6)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (Cold Twisted Bars ). Total R.C.C Qty (2.66) = 2.66 cu.m)@ x 7850 x 1.5/100 = 313.22 Kg

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Above plinth level. (Cold Twisted Bars ). Total R.C.C Qty (3.416 + 9.602) = 13.018 cu.m)@ x 7850 x 1.5/100 = 1532.87 Kg

Add or deduct for plaster drip course/groove in plastered surface or moulding to R.C.C projection Miscllaneous

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:4( 1 cement : 4 coarse sand) Trench /Trench /For Apron Ist step

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 ( 1 cement : 6 coarse sand) Bldg Wall L.Wall 1st step / 2nd step /3rd step /4th step/Upto plinth/S.Wall 1st step/2nd step/3rd step / 4th step /Upto plinth

Brick work with F.P.S. Bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above planth level up to floor V level. Cement morat 1:4 ( 1 cement : 4 coarse sand)

Random Rubble Masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 : 6 : 12 (1 Cement : 6 Coarse Sand : 12 graded Stone Aggregate 20 mm nominal size ) at plinth Level with Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand)

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with: Cement mortar 1:6( 1cement:6 coarse sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab upto 0.50 sqm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab upto 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.63 mm all complete With 12 mm mild steel U beading

Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm

Providing and fixing ISI marked oxidised M.S. pressed butt hinges withnecessary screws etc. complete 100x58x1.90 mm

Providing and fixing ISI marked oxidised M.S. pressed butt hinges withnecessary screws etc. complete 75x47x1.70 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 100x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 100 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete200x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium sliding door bolts ISI marked anodised (Anodic coating not less than grade AC 10 as per IS:1868)transparent or dyed to required colour or shade with nuts and screws etc. complete: (100x10mm)

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary scerews etc. complet: 125mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary scerews etc. complet: 100mm

Providing and fixing aluminium handles floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary scerews etc. complet: Single rubber stopper

Providing and fixing aluminium handles floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary scerews etc. complet: Twin rubber stopper

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer

Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and ifrequired angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge Fixing with adjustable lugs with split end tail to each jamb(profile-c)

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Steel work welded in built up sections/ framed work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer susing structural steel etc. as required. Window grill/Trench (Angle 40 x 40 x 5)/Trench cover

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 5.5 mm thick glass panes

Cement concrete flooring 1:2:4 (1 cement : 2coarse sand : 4 gradd stone aggregate) finished with a floating coat of neat cement including cement slurry, (40 mm thick with 20mm nomnal size stone aggregate). In Store Shed /In Apron = (2 x 3.00 = 6.00)

Providing and fixing glass strips in goints of terrazo/cement concrete floors. (40mm wide and 4mm thick)

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigement to match the shade of the slab including rubbing and polishing omplete with base of cement mortar 1:4 (1 cement: 4 coarse sand): 25mm thick

Kota stone slabs 25mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement : 3 coarse sand ) including rubbing and polishing complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacture) of approved make in all colours, s@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. In S.G.R. Toilet

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS; n 20 mm thick Cement Mortar 1:4 ( 1 cement :4 Coarse sand ) In S.G.R. Toilet

Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 coarse sand ) including grouting the joints with white cement and matching pigments etc, complete. (size of Tile 60x60cm) Room/In Old SGR Building (25+7.48+13.71)/Skirting, Steps etc.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 (i) Single socketed pipes (75mm diameter)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointin with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes (110mm diameter)

12mm cement plaster of mix: 1:4 (1cement : 4coarse sand) Cable Trunch

12mm cement plaster of mix: 1:6 (1cement :6coarse sand) Outter (8.81+3.23+3.23)/Deduction D/W/opening

15mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1cement :6coarse sand) Outter (8.81+3.23+3.23)/Deduction D/W/opening

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) SGR/SLAB PROJECTOIN S/S /L/S / SUN SHED

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepate the surface even and smooth complete

Distempering with oil bound washable distemper or approved brand and manufacture to give an enen shade . New work (two or more coats ) over and including priming coat with cement primer. INTERNAL PALSTER / Ceiling Plaster +Projection )

Finishing wall with textured exterior paint of required shade: New work (two or moar coats applied @ 3.28 ltr/10sqm over and including base coat of water proofing cement paint applied @2.20kg/10sqm. Over outer walls

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved prand and manufacture. For window grills /Door/Miscllaneous

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to repare the surface even and smooth complete. (117.37+55.28)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement: 4 coarse sand)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats) (As per M.B. No. 278/L pg. No. 198)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.(As per M.B. No. 278/L pg. No. 198)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in- charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in- charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast lron P or S trap. 10 litre low level white P.V.C. flushning cistem with manually controlled device (handle lever ) conforming to IS: 7231, with all fitting and fixtures complete including cutting adn making good the walls and floors wherever required: White Vitreous china Orissa patern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing M.S. holder-bat clamps of approved design to Sand cast iron/cast iron(spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4mix( 1cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. For 75mm dia. pipe

Providing and fixing plain bend of required degree. 100mm ( Sand cast iron S&S as per IS-1729)

Providing and fixing single unequal plain invert branch of require degree: 100x100x75mm (sand coast iron S&S as per IS-1729)

Providing and fixing terminal guard: :75mm (Sand cast iron S&S as per IS- 1729)

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floorsSand cast iron S&S as per IS: 3989

P/F PTMT Tower rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm,weighing not less than 190 gms.

Concealed pipe including painting with anti corrosive bitumasiic paint cutting chases and making good the wall . 15mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20mm dia nominal bore

Constructing masonry Chamber 30x30x50 cm inside with 75 class designation brick work in cement mortar 1:4 (1cement : 4coarse sand) for stop cock with C.I. surface bozx 100x100x75mm (insside) with hinged cover fixed in cement concrete slab 1:2:4 mix ( 1cement : 2coarse sand: 4 graded stone aggregate 20mm nomnal size) necessary excavation foundation concrete 1:5:10( 1cement:5fine sand :10 graded stone aggregate 40mm nominal size) and inside plastering with cemnt mortar 1:3 (1cement:3coarse sand ) 12mm thick finsished with a floating coat of neat cement complete as per standard design . With F.P.S. bricks

Providing and placing on terrace (at all floor levels) polyethylene water stonrage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for nilet, outlet and overflow pipes but without fittings and the base support for tank.

Providing anf fixing C.P. brass bib cock of approved quality conforming to IS: 8931 (15mm nominal bore).

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS Standards and weighing not leass than 690 gms. (15mm nominal bore)

Providing and fixing C.P. brass stop cock (concealed ) of standard design and of approved make conforming to IS:8931. (15mm nominal bore)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 a(15mm nominal bore)

P/F PTMT soap dish holder having lengthof 138 mm breadth of 102mm height of 75 mm with concealed fitting arrangements weighing not less than 106 gms

Providing and fixing aluminium work for doors, windows ventilators and partitions with extruded built up standard tubular sections/ approprate Z ections and other sections of approprate make conforming to IS: 733 and IS: 1285 fixed with rawl plugs and screws of with fixing clips or with expanision hold fasteners including necessary filling up of gapu at junctions at top bottom and sides with required PVC/ neoperene felt etc. For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows ventilators and partitions with extruded built up standard tubular sections/ approprate Z ections and other sections of approprate make conforming to IS: 733 and IS: 1285 fixed with rawl plugs and screws of with fixing clips or with expanision hold fasteners including necessary filling up of gapu at junctions at top bottom and sides with required PVC/ neoperene felt etc. : For shutters of doors windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever requiredPowder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle borad conforming to IS: 12823 Grade I Type II in panelling fixied in aluminum doors windows sutters and partition frames with C.P. brass/ stainless stell screws etc.

Providing and fixing glazing in aluminium door, window ventilator shutters and partitons etc. with PVC/ neoprene gasket etccomplete as per the architectural) With flot glass panes of 5.50mm thickness

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS: 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable 1.5 sqmm FR PVC insulated copper conductor single core cable etc as requited. GROUP B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required Circuit / sub main wiring in PVC codute 2*1.5 Sq.M*1*1.5 Sq.M

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ sub main wiring in PVC codute 2*2.5 Sq.M*1*2.5Sq.M

Wiring for circuit/submain wiring alongwith earthwire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface/recessed PVC conduit as required. 2X4 sqmm + 1X4 sqmm earthwire

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator) 8Way Double Door

S/F 5amp to 32amp rating 240 volts,B series,MCB suitable for lighting and other loads of single pole in the existing MCB D.B complete with connection,testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40AMP rating double pole 240 V isolater in existing MCB DB complete

Earthing with GI earth plate600x600x6mm thick including accessories and providing masonary enclosure with cover plate having locking arrengment and watering pipe etc.as required (but without charcoal or coke and salt)

P/F Bajaj/Orient/Havells or equivalent make ceiling fan 1200 mm dia suitable for 230 v,50 hz,single AC supply and complete with all standard accessories such as blades & capacitor etc including installation testing & commissioning complete in all respect.(Rate approved by SE Civil vide letter no. 106 ECC/extra item dated 13/1/2014)

S/F Bajaj/Havells/Orient or equivalent make simple batten suoer light 36/40W 230V Cop. Fluoroscent Tube fitting complete with all labour material T&P etc. required for proper completion of work.(Rate approved by SE Civil vide letter no. 106 ECC/extra item dated 13/1/2014)

S/F of Exhaust fan 30cm sweep of Bajaj/Havells or other approved quality with all material, Labour T&P etc complete. (Approved By S.E. Civil).

RAVI CONSTRUCTION CO

M/S ARUN CONSTRUCTION

SURYA ELECTRICALS

KKR INFRA LLP

FABRICO INDIA PRIVATE LIMITED

M/S ARUN CONSTRUCTION

SURYA ELECTRICALS

Universal Engineering

KKR INFRA LLP

FABRICO INDIA PRIVATE LIMITED

FABRICO INDIA PRIVATE LIMITED

M/S ARUN CONSTRUCTION

RAVI CONSTRUCTION CO

KKR INFRA LLP

Universal Engineering