REPAIR TO TOILET, WASHROOM, SUNKEN FLOORS AND SANITARY FITTINGS IN SMQ, CANBERA LINES AND DHOBI GHAT AREA AT AF STN BAREILLY UNDER GE(AF) BAREILLY

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris from site to outside MoD land.

M&L for 25 mm thick cement concrete (1:2:4) type B-O using 12.5 mm graded crushed stone aggregate as in sub base, floor etc all as specified.

M&L for screed bed or bedding layers of mortar 15mm thick in cement mortar (1:6) for laying floor finish all as specified.

M&L for 10 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of wall including finishing the surfaces fair and even for tiling work all as specified.

M&L for non skid colour ceramic tiles (first quality) 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile all as specified.

M&L for non skid colour ceramic tiles 7 to 8 mm thick (first quality) (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile all as specified.

M&L for glazed ceramic coloured/printed tiles of size 350 mm x 250 mm x 7 mm / 450 mm X 350 mm X 7 mm thick (first quality) on vertical surface such as wall, dado, skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed.

Dismantling of water tank of capacity not exceeding 1000 ltrs complete all as specified.

Dismantling existing water tank exc 500 & not exc 1000 ltrs capicity ,setting aside or lowering if reqd for repairs ,cleaning etc and hoisting ,reconnecting and refixing in position all as specified and directed

S&F for rotational moulded polyethylene water storage tanks three layers (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified.

S&F for rotational moulded polyethylene water storage tanks three layers (cylindrical vertical with closed top) of 500 ltrs capacity hoisted and fixed in position all as specified.

S&F for PVC ball cock, 20 mm bore high pressure of PTMT Epoxy coating aluminium rod , with polythene float and flynut complete, screwed for iron pipe complete all as specified. (Min wt 210gm )

S&F in repair PVC ball cock, 20 mm bore high pressure of PTMT Epoxy coating aluminium rod , with polythene float and flynut complete, screwed for iron pipe complete all as specified. (Min wt 210gm )

Taking up or down 15 mm bore steel tubing and connections including cleaning for re-fixing all as specified.

Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing all as specified.

S&F for 15 mm bore galvanised steel tubing medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified.

S&F for 20 mm bore galvanised steel tubing medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified.

Re-fixing old GI tubing and connection in new or old location after cleaning etc of 20 mm bore all as specified.

S&F in repair 20mm bore Gun-metal, glove or gate valves with iron wheel head screwed both ends or iron pipe and fixed complete all as specified.

S&F for 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls, ceiling or laid in floors complete all as specified.

S&F for 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls, ceiling or laid in floors complete all as specified.

S&F for brass Elbow (3/4 inch X ½ inch)

S&F for brass Tee 20 mm bore.

S&F for male Brass Threaded Adaptor (MTA/ MBTA) for 20 mm dia.

S&F for female Brass Threaded Adaptor (FTA/ FBTA) 20 mm dia.

S&F in repair cast iron pipe floor trap long neck type 75 mm dia without greating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified.

S&F for 75 mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with lead joint laid in tranches or fixed to walls all as specified.

S&F for 100 mm bore cast iron soil sand cast soil, waste and vent pipe in any length, with or without ears with cement joints in cement sand mortar 1:1 with spun yarn laid in trenches or fixed to walls all as specified.

S&F in repair 100 mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) all as specified.

S&F in repair 75 mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) all as specified.

S&F in repair cast iron cowl for 75mm bore pipe all as specified.

S&F in repair 100 mm bore cast iron branch pieces, single (equal or unequal) , ordinary or inverted (spigot or socket type)or with parallel branches complete all as specified.

S&F in repair 75 mm bore cast iron branch pieces, single (equal or unequal) , ordinary or inverted (spigot or socket type)or with parallel branches all as specified.

S&F in repair stack clamps for 100 mm bore pipe out of 50 mm by 5 mm flat iron and 16 mm dia MS round iron stays including bolts and nuts and securing ends of stays to wall or roof all as specified.

S&F in repair stack clamps for 75 mm bore pipe out of 50 mm by 5 mm flat iron and 16 mm dia MS round iron stays including bolts and nuts and securing ends of stays to wall or roof all as specified.

Dismantling of cast iron pipes 100/ 75mm bore of any radius jointed in cement mortar from any position all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.

S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls with MS clamps all as specified.

S&F for 110 mm bore PVC (SWR) bends any radius of bore all as specified.

S&F in repair vitreous china sqautting pan "orissa pattern" size 580 mm x 440 mm white with intergral foot rest including cast iron "P" or "S" trap and PVC flush pipe including making good floor as per existing complete all as specified

S&F in repair vitreous china wash down water closet pan (padestal pattern) white including PVC flush pipe & PVC sheet cover white closed pattern with hinging devices all as specified.

S&F in repiar chromium plated Jet with flexible cord suitable for EWC including fixing to steel pipe or union all as specified.

S&F in repairs chromium plated health faucet with hand shower & flexible cord suitable for EWC including fixing to steel pipe or union all as specified.

S&F in repair vitreous china wash basin, white, flat back of size 550 mm x 400 mm including cutting for and pinning in ends of the brackets or erecting stand all as specified.

S&F in repair PVC low level flushing cistern dual flush white colour, 10 litres capacity, valve less, with inlet, ball valve, float and handle including brackets, PVC flush bend pipe all as specified.

S&F in repair vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) all as specified.

S&F in repair 15 mm bore chromium plated concealed type stop cock with long shank, cast copper alloy screwed down high pressure with crutch handle screwed for iron pipe complete all as specified.

S&F in repair 15 mm bore chromium plated angle valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for iron pipe complete all as specified.

S&F in repair PVC connection 45 cm long with two nuts and washers all as specified.

S&F in repair chromium plated brass wall mixture two-in-one with shower leg accessories with mark Hot & Cold for 15 mm bore all as specified.

S&F in repair 15mm bib taps, chromium plated with fancy type long body, fancy type with screwed down, screwed for iron pipe all as specified.

S&F in repair 15 mm bore chromium plated pillar taps, cast copper alloy, with captan head screwed down high pressure with or with out lettred Hot or Cold with long screwed shanks and fly nut screwed for iron pipe or for brass ferrule all as specified.

S&F in repair 15 mm dia two way bib tap, fancy type, chromium plated with fancy type long body with screwed down, screwed for iron pipe complete.

S&F in repair corner self fency type three tier with 5.50 mm thick glass mounted on CP brass frame fixed with brass screw & plug size not less than 450 mm as suitable for bath room as per manufacturer instruction all as specified.

S&F in repair chromium plated grating 125 mm dia with or with out hole to match the colour of floor tile all as specified and directed (Min Wt 40 gms).

S&F in repair PVC waste pipe with adopter in any length & 32 mm dia suitable for WHB all as specified.

S&F in repair tubular towel rail 20mm dia D-type 600 mm long between flanges brass chromium plated complete fixed to walls.

S&F in repair brass chromium plated shower rose 125mm size with swivel joint incl a shower arm 15mm size, 195 mm long with bend of 45 degree with flange of CP all as specified.

S&F in repair fency type soap dish, chromium plated all as specified.

Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water all as specified.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces finished fair and even surface including mixed with liquid WPC as per manufacturer instruction complete (Note :- WPC will be measured and paid separately).

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work or concrete surfaces including finishing surface even and smooth without using extra cement all as specified.

M&L for 10 mm thick rendering in cement mortar (1:3) on concrete surfaces in ceiling including finishing surface even and smooth without using extra cement all as specified.

Supply only liquid water proofing compound.

Demolition of brick work built in cement mortar or cement lime mortar including all quions, arches, pillers etc all as specified and directed.

M&L for fly ash brick work, using old size bricks, straight or curved on plan 6.0 mtr mean radius built in cement mortar 1:6 all as specified.

M&L for prepration of newly plastered surface of wall and applying two coats of cement base all as specified.

M&L for prepration of newly plastered surface on wall and applying two coats of white wash all as specified.

M&L for prepration of newly plastered surface in ceiling and applying two coats of white wash all as specified.

M&L for prepration of old plastered surface in ceiling and applying two coats of white wash all as specified.

M&L for preparation of old surfaces including brooming down to remove all dust,dirt and loose scales of item and other foreign matter or steel wire brushing scrapping down smoke soot, grease spots, moulds moss and efforescent salts and trading oil and applying two coats of white wash on wall all as specified.

M&L for preparation of old surfaces including brooming down to remove all dust, dirt and loose scales of item and other foreign matter or steel wire brushing scrapping down smoke soot, grease spot moulds moss and efforescent salts and trading oil and applying one coat of oil bound distemper on wall all as specified.

Taking down chowkat or frame with shutter( without taking off shutter from frame) area exc 1.50 Sqm & not exc 4 Sqm each with fittings all as specified.

Taking down chowkat or frame with shutter( without taking off shutter from frame) area not exc 1.50 Sqm each with fittings all as specified.

S&F for factory made PVC door frame of size 50 mm x 47mm with a wall thickness of 5mm grid PVC sheet mitered at corner and pinned with two members 150mm long brackets of 15 mm x 15mm MS Square tube 19 gauge EPDM rubber gasket weathered sheet to be provided through the frame, door frame to be fixed to the wall suing MS screw of 65/100mm size complete as per manufacturer's specification.

S&F for 30 mm thick factory made solid panel PVC door shutter conforming as per IS-4020 made from MS tube of 19 gauge thickness of size 19 mm x 19 mm style and 15 mm x 15 mm for rail covered with heat moulded PVC channel of 5mm thick and 75 mm, 125 mm, 125 mm wide for top rail, lock rail and bottom rail on either side at 5 mm thick 20 mm wide cross PVC sheet of gap inserted for top rail and bottom rail, paneling of 5 mm PVC sheet fitted in MS frame welded/sealed to the style at rail with 30mm wide, 5 mm thick PVC sheet beading sides and jointed together with solvent cement adhesive etc all as specified.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkat of size 50 mm x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. (Note: Butt hinges shall be paid separately)

S&F for sliding door bolts 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F for 100 mm long aluminium hinge, cast type, anodised all as specified.

S&F for for 125 mm Extruded aluminium alloy handles, fabricated type, anodised all as specified.

S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified and directed

Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified.

S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square area not exceeding 0.5 Sqm each pane all as specified.

S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square area exceeding 0.5 Sqm each pane all as specified.

S&F for 3mm thick figured glass, pin head type and glazing with oil putty in squares all as specified.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified.

S&F for powder coated of any colour (thickness or powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc all as specified.

S&F for powder coated of any colour (thickness or powder coating not less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc all as specified.

S&F for anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/ M including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.) hinges type B-21 100 mm long (2 Nos.) suitable handle (1 No.) all as specified.

S&F for anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineering-in-charge.

S&F for 5.50 mm thick sheet glass (tinted/ reflective type) in square each pane complete

S&F for 12 mm thick prelaminated boards, grade 2 quality, interior grade, decorative type with decortive face veneer with decorative face veneers on both faces fixed at site as per specification

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth all as specified.

Demolition of cement concrete of any description and in any position as in floors/sunken floors complete all as specified including removal of debries from site to outside MoD land.

M&L for cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate as in filling of sunken floors all as specified.

M&L for 100 mm thick cement concrete 1:2:4 type B-1 (using 20 mm grade stone aggregate) as in floor finishing top surface even and smooth without using extra cement all as specified.

M&L for cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, sub base floor all as specified.

M&L for applying hot blown grade bitumen in two coats to plastered/concrete surfaces @ 1.5 Kg /Sqm per coat all as specified.

M&L for loose filling with aggregates of gauge 40 to 80 mm brocken bricks in soakage pits, soakage wells, sunkan floor of toilets all as specified.

Demolition of stone slab and tiles, laid, bedded and pointed in any mortar of any description and thickness all as specified.

S&F for 18 to 20 mm thick single piece perfect black granite work (table rubbed and polished) in steps, jambs, pillers, window cills, cooking platforms, wash basin counter and like in cement mortar (1:4) incluidng pointing in white cement (1:2) using marble dust with admixure of pigments to match with shade of granite all as specified and directed.

M&L for rounding to edges of stone slabs one edge such as in steps, cooking platform and other similar situations all as specified.